Drilling milling machine

Bernardo FM 45 HS

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW Itodpfx Asd Rxw Hschsi space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg

Condition: new, Year of construction: 2025, Heavy-duty, solid cast-iron construction High running smoothness due to ground, oil-bath lubricated gears Right-hand/left-hand operation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant system Machine lamp Gear head can be swiveled ± 60° Adjustable wedge strips Solid dovetail guide for the column, hand-scraped, for maximum stability and precision Height-adjustable, large-sized protective shield with microswitch Drilling depth stop Digital position display DRO 5 Drilling/tapping function Solid and large-sized cross table, precisely surface-finished with T-slots and adjustable wedge strips Solid machine base made of cast iron with chip collection groove Single-stage, high-quality industrial electric motor Large speed range of 60 - 2,760 rpm through 2 continuously adjustable speeds Dimensions and weights Length approx. 1600 mm Width/Depth approx. 930 mm Height approx. 2110 mm Weight approx. 495 kg Drilling/Milling performance Arbor size max. 63 mm Shell mill size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Itodpfeg U Uv Ujx Achei Connection voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Milling table, horizontal Length 800 mm Width 240 mm Distance Vertical spindle - Milling table max. 420 mm T-slot size 14 mm Number of T-slots 3 T-slot spacing 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-axis manual 560 mm Y-axis manual 195 mm Z-axis manual 350 mm X-axis automatic 480 mm Vertical spindle Overhang 258 mm Spindle mount MK 4 Speed range 60 – 2760 rpm Number of speed ranges 2 Speed control Steuerung der Drehzahlregelung electronic Draw bar M 16 Swivel range milling head Z - X plane ± 45 ° Quill diameter 75 mm Quill stroke 120 mm Location: In stock at 54634 Bitburg - available immediately -

Condition: new, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle adaptor ----- MK4 Cross table ----- 600 x 190 mm Foot ----- 650 x 450 mm Diameter T-slots ----- 12 mm Maximum distance spindle - table ----- 610 mm Maximum distance spindle - foot ----- 1180 mm Weight ----- 390 kg INCLUDING Isdpfx Aeq E N Uxocheti * LED work light * Cooling system * Digital depth stop * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Toolbox with various tools

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) Itjdpfx Aoty A Ehechsi - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: ready for operation (used), machine/vehicle number: 1124, table mounting size: 300 x 1300 mm table movement x: 950 mm table movement y: 220 mm table movement z: 400 mm Itedpfx Acod H Ilrehei spindle taper horizontal: MK 4 spindle turning speed range: 25 - 1250 rpm carriages longitudinal and cross: 7,5 - 635 mm/min carriages vertical: 3 - 250 mm/min electrical connection: 380 V, 4 kW space needed: 1670 x 1500 x 1580 mm weight: 2600 kg

Condition: used, Universal milling machine, console milling machine SIMPLON Type UN-S / Universa-Super Machine No.: 17220 Year of manufacture: 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm, 16 steps Feed rate X, Y, Z axis 11 - 500 mm/min Rapid traverse 2400 mm/min Main spindle motor power 4 kW Connection voltage 380 Volt, 50 Hz - 3-axis digital display HEIDENHAIN, Type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Clockwise and counterclockwise rotation of the milling spindle - Vertical milling head, swiveling +/- 90° - Overarm from the milling head, manually adjustable 700 mm - Side, manually extendable counter bearing mount with dovetail guide 450 mm - Mechanical tool clamping with tightening screw M16 - Coolant system in the machine base - Electrical control cabinet on the machine Space required L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition Iodpfx Asifu Arjchoti

Condition: new, Bernardo BF 45 HSV Drilling and Milling Machine Technical Specifications Drilling capacity in steel: 32 mm Ijdpfx Aogd H Uxjchjti Drilling capacity in cast iron: 40 mm Milling cutter arbor max.: 80 mm Overhang: 280 mm Spindle speed: (12) 75 – 3200 rpm Spindle taper: MK 4 Quill stroke: 120 mm Quill feed: (3) 0.10 / 0.18 / 0.26 mm/rev Table size: 730 x 210 mm T-slot size: 14 mm Distance spindle / table max.: 640 mm Distance spindle / base plate max.: 1190 mm Travel (x / y): 495 / 200 mm Milling head swivel: -90° to +90° Height adjustment milling head: 260 mm Column diameter: 115 mm Working area base plate: 365 x 375 mm Motor output S1 100%: 1.1 / 1.5 kW (400 V) Motor input S6 40%: 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H): 1070 x 800 x 2060 mm Weight approx.: 362 kg Scope of supply • Quick-change drill chuck 3 – 16 mm / B 16 • Drill chuck arbor MK 4 / B 16 • Draw spindle M 16 • Reducing sleeve MK 4 / 3 • Combination milling arbor MK 4 / 27 mm • Automatic quill feed • Height-adjustable protective shield • Digital quill stroke indicator • Thread cutting device • Coolant system • LED machine light • Longitudinal measuring scale • Operating tool

Condition: used, functionality: fully functional, machine/vehicle number: 09TY0034/09TY0033, Typhoon direct connected mixer Double cartridge seal (carbon)(not tested) mixer rotor Ø300 connection flange size DN200 PN10 with 4 holes shaft size Ø45mm shaft length to screw 700mm functions well. Itodewrrk Ejpfx Achji

Condition: good (used), For Sale: Set of Three Dissolvers / Mixers (photos numbered accordingly) 1. UNIVERSAL DISSOLVER – PASQUALE MORENO GENOVA Technical Specifications: -Agitator drive: Electric -Column lifting: Hydraulic -Adapted for connection to a screw feeder for dosing powder -INOX stainless steel mixing tank (no drive) -Dispersing disk diameter: Ø 250 mm -Disk rotation speed: 1400–2800 RPM -Tank dimensions: Ø 110 cm × 100 cm (height) -Overall dimensions (L×W×H): 210 × 110 × 170 cm -Power supply: 380/400 V 2. DISSOLVER 3HP with Inverter Technical Specifications: -Electric column lifting -Inverter for smooth speed adjustment -Agitator motor power: 3 HP (2.2 kW) Isdjwwh Hgepfx Achjti -Dispersing disk diameter: 200 mm -Shaft length with disk: 600 mm -Maximum lifting height: 1000 mm -Total height: 2200 mm -Power supply: 380/400 V 3. LABORATORY MIXER FERRI F30 – 1HP Technical Specifications: -Smooth mechanical speed control via knob -Manual column lifting with counterweight -Electrical control box -Suitable for small containers -Total height: 1300 mm -Overall dimensions (L×W): 600 × 600 mm (with control box: 600 × 800 mm) -Max disk lifting height: 600 mm -Motor power: 1 HP (0.75 kW) -Speed range: up to 2800 RPM -Power supply: 220/230 V Keywords: dissolver, mixer, process equipment, mixing machinery, agitator, machine sales, used machines, chemical industry, cosmetics industry, production line, mixing technology, chemical production, Diamac

Condition: new, Bernardo Universal Milling Machine UWF 110 Servo -1000 Technical Specifications Table size 1370 x 300 mm Spindle mount ISO 40 mm Spindle speed (11) 45 - 1660 rpm Travel in longitudinal direction (x) 1000 mm Travel in transverse direction (y) 360 mm Travel in vertical direction (z) 400 mm Distance spindle / table 60 - 460 mm Itjdsg Hzbxspfx Achei Overhang 95 - 575 mm Table swiveling -45° to +45° Max. workpiece weight 250 kg Feed range longitudinal / transverse (8) 30 - 830 mm/min Feed range vertical (8) 23 - 625 mm/min Rapid traverse x, y and z axis 1000 / 1000 / 750 mm/min T-slots (number / width / spacing) 3 / 14 mm / 80 mm Main motor 3.0 kW Servo motor (torque / power) 10 Nm / 1.5 kW Coolant pump output 60 W Coolant pump flow rate 12 l/min Machine dimensions (W x D x H) 1740 x 1860 x 1900 mm Weight approx. 1505 kg Scope of delivery • 3-axis digital display ES-12 H with LCD display • Draw-in spindle M16 • LED machine lamp • Feed for x, y and z axis • Coolant system • Support bearing • Long milling arbor ISO 40 / 27 mm • Combination milling arbor ISO 40 / 27 mm • Coolant tray • Adjustable safety device • Central lubrication for x, y and z axis • Operating tool