Used Insulating glass making machines for sale (86)

Condition: used, Year of construction: 2001, consisting of: manual glass support, front-mounted gantry crane system, make AMA-TEC, consisting of: 4 vertical columns, 2 longitudinal and 2 transverse travel rails, attached vacuum traverse, max. load capacity: 150 kg, with 6 suction cups and floor operation, glass washing machine, make LEHNHARDT, type: GWSU2.70, year of manufacture 2001, serial no. 251.0538, glass dimensions: max. 2700 to 5000 mm, max. pane thickness: 15 mm, max. load capacity: 1000 kg, with control unit and system control, make SIEMENS, type: OP17, outlet and buffer section, inspection station, type: VR2.70-2590, year of manufacture 2001, serial no. 2260612, separate operating unit, system control, make SIEMENS, type: OP17, outlet section, pressing unit, type: ZP2.70-3.50, serial no. 234.0596, separate tilting table, automatic frame feed, separate sealing unit, type: OPL, with pump and dosing unit, make HDT, type: HD200 CLASSIC, year of manufacture 2019, serial no. 1235, swivel arm, turntable, cork applicator, type: DA4AE 2.70, year of manufacture 2001, serial no. 267.0091, downstream sealing units, ceiling crane system, ABUS/DEMA, with 8 vertical columns and 2 travel rails, each with electric chain hoist, vacuum traverse, and floor control (NOTE: THIS POSITION IS LOCATED AT THE FOLLOWING LOCATION: CALEOGLAS KIEL, AM IHLBERG 6-8, 24109 MELSDORF) Bwjlimjwct T Ae Hpcjl

Auction

Swansea

6,988 km

Insulating glass making machine
Bystronic IGU line 3

Listing

Insulating glass production machine Bystronic 2300 x 4500 mm

Maasmechelen

7,609 km

Insulating glass production machine
Bystronic2300 x 4500 mm

Call

Condition: used, Year of construction: 2011, Functionality: fully functional, Bystronic / 2300 x 4500 mm R-L 2300 x 4500 15-60 mm 1000 kg Washer GW D 2300 VR 3 B 15 Gas press ZPG 2700 x 3500 VR SP 1 AS 15-60 mm 2300 x 4500 mm 1000 kg cy 2011 Sealing robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg 1-head automatic sealing machine / 1 / GMR Stock Place: GMR ES Bwslim Hpsrr Tmcjcol

Advertise now from €3.69*
11 million buyers are waiting for you

Sell used machines now

Find out now
+49 201 857 86 180

Create listing

*per listing / month

Listing

Drilling and milling machine Hegla Bohr und Fräsautomat FA 2000

Pleystein

8,084 km

Drilling and milling machine
HeglaBohr und Fräsautomat FA 2000

Call

Listing

Insulating glass making machine Lisec FPS-35/25U2

United Kingdom

6,687 km

Insulating glass making machine
Lisec FPS-35/25U2

Call

Condition: good (used), Year of construction: 2007, Functionality: fully functional, input voltage: 400 V, type of input current: AC, Lisec gas filling press for maximum unit sizes of 3500 x 2500 mm, year 2007, consisting of: RSVN-35/25, frame set section, year 2007 RTVB-15/25ST, extension conveyor for measuring section, year 2007 RTVB-15/25MZU2, measuring section for gas filling press, year 2007 FPS-35/25U2, gas filling press for Argon, year 2007 Belimewca Hpe Hpcewl RTVB-15/25ST, press outlet conveyor, year 2007 UKL-35/25, tilt table, year 2007

Discover more used machines

Glass grinding machines

Listing

Velžys

8,260 km

Butyl extruder
FORELMB7501

Call

Listing

Insulating glass production machine WIWA Spülpumpe 27.32

Sankt Valentin

8,307 km

Insulating glass production machine
WIWA Spülpumpe27.32

€1,950

Fixed price plus VAT

Call

Auction

Insulating glass making machine Bystronic IGU line 2

Swansea

6,988 km

Insulating glass making machine
Bystronic IGU line 2

Listing

Insulating glass production machine GMR Type-A Glass Transport Rack

Maasmechelen

7,609 km

Insulating glass production machine
GMRType-A Glass Transport Rack

Call

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, S-TRA-023 Make GMC Type: A-Type W 800 x L 2000 x H 1600 mm Galvanized Info: Type-A Galvanized W 800 x L 2000 x H 1600 mm 2 x 240 mm load 25 pcs CY: 2023 S-TRA-024 Make GMC Type: A-Type W 1200 x L 2200 x H 2100 mm Info: Type-A galvanized 2 x 400 mm load 4 pcs S-TRA-025 Make GMC Type: A-Type W 100 x L 3500 x H 1550 mm Galvanized Info: Type-A Galvanized 2 x 350 mm load 16 pcs + 10 bottom trolleys EG 150 kg max load 1500kg CY: 2018 Boliov T I Dxjm Hpcjwl S-TRA-026 Make GMC Type: A-Type W 1100 x L 2200 x H 2000 mm Bleu Info: Type-A Bleu W 1100 x L 2200 x H 2000 mm 2 x 390 mm load EC 143 kg Max load 2000 kg 23 pcs in stock Option: 20 bottom trolleys CY: 2019 S-TRA-027 Make GMC Type: L-Type W 760 x L 1740 x H 1200 mm Galvanized Info: Type-L W 760 x L 1740 x H 1200 mm Galvanized 1 x 580 mm load 11pcs CY: 2018

Listing

Insulating glass production machine BEST MAKINA GLASPRODUKTIONSLINIE 2018Baujahr

Srebrenik

8,789 km

Insulating glass production machine
BEST MAKINAGLASPRODUKTIONSLINIE 2018Baujahr

€270,000

ONO plus VAT

Call

Condition: good (used), Year of construction: 2018, Functionality: fully functional, BEST MAKINA GLASS PRODUCTION LINE Complete glass production line for sale – Best Makina, new purchased in 2018. Due to the purchase of an automatic glass factory and expansion of production capacity, we are forced to sell this line. The line consists of 5 parts: BADF 2500 – machine for filling the spacers BASB 2500 – machine for bending the spacers BLA2 2500 – grinding machine BLS-S Logic SEAL – robot BW 2506 – washing machine and press (with gas filling) Can be purchased as a complete line or individually. Everything is fully functional and used daily. Availability: Takeover possible in August 2025. The machine will remain in operation until July 20, 2025 and can be inspected until then. Bslisv Aawcem Hpcowl If you have any further questions, please do not hesitate to contact us. HERCEG doo Industrijska bb, Srebrenik, 75350 Bosnia and Herzegovina

Listing

Insulating glass making machine Lenhardt IG line for 5000 x 2700 mm

Belgium

7,562 km

Insulating glass making machine
LenhardtIG line for 5000 x 2700 mm

Call

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, input voltage: 400 V, load capacity: 1,000 kg, type of input current: AC, Lenhardt IG line, working direction left to right, manufacturing year 06/2000, for maximum unit sizes of 5000 x 2700 mm and 60 mm thickness, consisting of: - TB-SR-2,7-2,5-VL-1AS, inlet conveyor (roller type) of washing machine with one drive motor - GW-SU-2,7, washing machine with 8 brushes for low-e, including sand filters and blower - TB-LK-2,7-3,7-VL-2AS, washing machine outlet conveyor (air cushion type) with 2 drive motors - VR-2,7-2,9, 1AS, frameset section with 1 drive motor Belewd I Hyeim Hpcswl - TB-LK-2,7-2,5-VL-1AS, inlet conveyor (air cushion type) of gas filling press with 1 drive motor - ZP-TG-2,7-5,0-VL-SP-G-2AS, gas filling press for Argon with 2 drive motors - TB-BR-2,7-2,5-VL-1AS, outlet conveyor (roller type) of gas filling press with 1 drive motor - DA-4AE-2,7-VL, 4-lane cork application device - VA-2K-2,7-VL-REC-PU-ZD, 2-component sealing robot Technical details: Maximum load on the line: 1000 kg Maximum single glass thickness: 15 mm Maximum unit thickness: 60 mm Maximum unit size: 5000 x 2700 mm Power supply: 400V/50Hz

Listing

Machine for manufacturing insulating glass t-s-i.de Mastermix Gear Easy

Søndersø

7,584 km

Machine for manufacturing insulating glass
t-s-i.deMastermix Gear Easy

€19,800

EXW Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2015, Functionality: fully functional, machine/vehicle number: 3182, Fully functional and in perfect shape, used two-component gear pump unit outflow dependent on viscosity, Siemens plc control, potlife monitoring with visual and audible warning signal, overpressure and shortage shut-down, metering control, mixing ratio infinitely variable, 200 liter A-drum, 20 liter B-drum, swivel arm heightening 300 mm, swivel arm prolongation 800 mm, hose prolongation 1 m, park pos.+automatic purging, weels (set of 4 pcs). Bwjlimswbtwro Hpcel Machine was produced in 2015 and renewed by t-s-i in 2019.

Listing

Insulating glass production machine Lenhardt VA - sealing robot

Sankt Valentin

8,307 km

Insulating glass production machine
LenhardtVA - sealing robot

€22,500

EXW Fixed price plus VAT

Call

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, input voltage: 400 V, Direction of travel: right - left PC upgrade 2020 - Glaston Bwelsvx Rnksim Hpcjl Max. glass size: 2700 x 5000 mm Max. element thickness: 60 mm 2-fold and 3-fold elements Dosage: 2x200 L base and 2x 20 L hardener Material: PS (polysulfide)

Auction

Port Talbot

6,999 km

Insulating glass making machine
Lisec

Listing

Insulating glass production machine Lisec KSR 30 3000 mm Left-Right

Maasmechelen

7,609 km

Insulating glass production machine
LisecKSR 30 3000 mm Left-Right

Call

Listing

Insulating glass making machine PointSpacer Hot Press

Plovdiv

9,353 km

Insulating glass making machine
PointSpacerHot Press

€6,800

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, Hot Press Machine • Using Purpose: Pressing Double Glass • Usable Glass Measures (max.) : a. Length : 2.000 mm., b. Width : 1.800 mm., • Voltage : 380 V., • Power : 31 (Kw), • Weight : 1360 kg (netto), • Dimensions(WxLxH): 2.080 mm. x 2.150 mm. x 1.600 mm., Belswdn S Asim Hpcewl

Listing

Insulation glass production line LiSEC 2500 x 3500 mm, Gas + Robot

Szczecin

7,944 km

Insulation glass production line
LiSEC2500 x 3500 mm, Gas + Robot

Call

Condition: excellent (used), Functionality: fully functional, total length: 31,320 mm, input voltage: 400 V, Equipment: documentation/manual, IInsulation glass production line for Low-E glass LiSEC – Austria, h=2.5 m Max. glass dimensions 2500 x 3500 mm Max. thickness of the glass unit 60 mm The line can make shapes. In very good technical condition. Bwjlim Hsuby A Rspcel The washer-dryer has been completely overhauled, and the other machines have been revised by LiSEC in 2022. Inspection during production is possible by appointment. 1. RTV, L=1600 mm, inlet conveyor, 2. RTV, L=1600 mm, inlet conveyor for washer, 3. VHW-25V-8, L=3380 mm, washing and drying machine, 8 brushes, ’91, overhauled in 2022, 4. RTV, L=1100 mm, exit conveyor for washer, 5. RSV, L=3920 mm, mounting station for spacer frames, 6. RTV, L=2730 mm, inlet conveyor for gas press, ’97, 7. FPS-35/25U, L=4050 mm, gas filling press, 8. RTV, L=1100 mm, exit conveyor for press, 9. RTV, L=1100 mm, exit conveyor for press, 10. RTV, L=1100 mm, exit conveyor for press, 11. RTV, L=1600 mm, inlet conveyor for robot, 12. RTVB-15/25VFE, L=1600 mm, inlet conveyor for robot, 2010 13. VFL-1N/25 + DOS-1PU, L=6200 mm, automatic sealing system / robot with dosing unit, year: 2010.

How can I spot good Insulating glass making machines?

Identifying a high-quality insulating glass making machine involves several factors that ensure efficiency, durability, and precision in glass processing. Firstly, check the manufacturer's reputation and reviews from other users to gauge the machine's reliability and service history. Secondly, inspect the machine's components, such as the glass washer, spacer frame positioner, and gas filling system for signs of wear and stability. High precision in component alignment and minimal vibration during operation are good indicators of quality.

Technological Features

Look for machines equipped with advanced technological features such as automated control systems, precision thickness adjustment, and integrated quality monitoring systems. These features enhance operational efficiency and ensure consistent quality in glass insulation. Additionally, assess the software's ease of use and the availability of updates.

Aftersales Support and Warranty

Consider the level of aftersales support offered by the manufacturer, including availability of spare parts and access to technical support. A robust warranty policy can also reflect the manufacturer’s confidence in their product, which often correlates with machine quality.

Energy Efficiency and Output Rate

Energy efficiency is crucial for reducing operational costs. Check the machine's energy consumption ratings. Moreover, compare the output rate with your production needs to determine if the machine can handle your volume requirements efficiently without compromising quality.

Demo and Testing

If possible, request a demo to see the machine in action, or inspect a previously manufactured product for quality. Tests such as the sealant application consistency and the spacer alignment should be carefully observed.

Technological Features

Aftersales Support and Warranty

Energy Efficiency and Output Rate

Demo and Testing

Listing

Insulating glass making machine Lisec IG line 3500 x 2500 mm

Hofkirchen im Traunkreis

8,299 km

Insulating glass making machine
Lisec IG line 3500 x 2500 mm

Call

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, working height: 520 mm, input voltage: 400 V, type of input current: AC, Lisec IG line for maximum unit sizes of 3500 x 2500 mm, consisting of following machines: Bolim Hjwbqdcjpcewl RTVB-32/2WE, washing machine inlet conveyor, year 2007 RTL-25VN, glass washing machine with 6 brushes for low-e, 1 hot water tank, 1 sand filter, and blower, year 2007 RTVB-16/25ST, washing machine outlet conveyor, year 2007 RSVN-35/25, frame set section, year 2007 RTVB-15/25ST, extension conveyor for measuring section, year 2007 RTVB-15/25MZU2, measuring section for gas filling press, year 2007 FPS-35/25U2, gas filling press for Argon, year 2007 RTVB-15/25ST, press outlet conveyor, year 2007 UKL-35/25, tilt table, year 2007 As an option a sealing robot for maximum unit sizes of 3500 x 2000 mm would be available: RTVN-15/20VFE, sealing robot inlet conveyor, year 2003 VL-1/20, automatic sealing machine for double and triple glass units, year 2003 DOS-1PTH, mix and metering station for PS, 200 litre base material and 20 litre for catalyst, year 2003 KHB-30, freezing unit, year 2007 The machines are in good working order and would be available within 4-6 weeks from order.

Listing

Machine for making insulating glass Lisec IGU Line Lisec FPS

Srebrenik

8,787 km

Machine for making insulating glass
Lisec IGU LineLisec FPS

€25,000

Fixed price plus VAT

Call

Listing

Insulating glass production machine Lisec TAL 60 SI and PS

Maasmechelen

7,609 km

Insulating glass production machine
LisecTAL 60 SI and PS

Call

Condition: excellent (used), LiSEC TAL is a hydraulic sealant applicator for two-component materials, with an adjustable mixing ratio, which is used for the production of insulating glass. Customs tariff number for 2K extruder: 84772000 Bwolov Epfzjim Hpcjl S-IGL-1862 / - Online - / Lisec / TAL 50 PU / to be reconditioned / GMR Stock S-IGL-2329 / - Online - / Lisec / TAL-60 SI/N / Construction Year: / TAL 60 SI TAL 60 PS / GMR Stock

Listing

Insulating glass production machine Lisec VFL1F50/29 H max 3000 mm - 60 mm

Maasmechelen

7,609 km

Insulating glass production machine
LisecVFL1F50/29 H max 3000 mm - 60 mm

Call

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, Functionality: fully functional, working height: 3,000 mm, Lisec RTVB15/30 VFE Lisec VFL1F50/29 Lisec DOS-E Sealing insulating glass units with two-component sealants, fully automatic Bwsliovuhgiom Hpcel Full support belt system Left-Right can be offered with complete line including washer, assembling station and gas press.

Trust Seal

Dealers certified through Werktuigen

Listing

Insulating glass production machine Lisec FPS-25/20U2 2500 x 2000 mm Right-Left

Maasmechelen

7,609 km

Insulating glass production machine
LisecFPS-25/20U2 2500 x 2000 mm Right-Left

Call

Listing

Insulating glass production machine GMR Lucide Spray unit

Maasmechelen

7,609 km

Insulating glass production machine
GMRLucide Spray unit

Call

Listing

Insulating glass production machine DPE - Rubbing GMR Rubbing Unit 1550 x 1550 mm

Maasmechelen

7,609 km

Insulating glass production machine
DPE - Rubbing GMR Rubbing Unit 1550 x 1550 mm

Call

Condition: new, Year of construction: 2013, 4.Measurements: 1. Pre-modification; the present flatness accuracy of the substrate supporting surface and the linearity of the rubbing roll to the supporting surface are measured to determine the actual status 1.1.1. Measurement performed with and without a (largest) substrate 1.1.2. Measurement performed under process / ambient conditions 2. Post modification; the modified flatness accuracy of the substrate supporting surface and the linearity of the rubbing roll to the supporting surface are measured to determine the improved status 2.1.1. Measurement performed with and without a (largest) substrate 5. Ambient conditions: 1. Temperature: 20 ± 5oC 2. Humidity: 50 ± 25%RH 6.Acceptance: 1. Approval of design drawings by customer before supplier starts manufacturing 1.1. The design approval will not free the supplier of his obligations to fulfill all parts of the deliverable 2. Site Acceptance Test (SAT) 2.1.Complete modification delivered / installed / pre-tested 2.2.Delivery of documentation (technical drawings of modified parts) 2.3.Acceptance tests Beliewam N Sjm Hpcswl 2.3.1. Accuracy measurements post modification with and without the largest (glass) substrate 2.3.2. Demonstration functionality on substrate sizes; 2.3.2.1. 10pcs. 300x300x4.0mm 2.3.2.2. 10pcs. 800x800x4.0mm 2.3.2.3. 10pcs. 1,200 x 1,500 x 4.0mm 2.3.2.4. 10pcs. substrate variations such as 2.0mm and/or tempered