Universal milling machine

RECKERMANN

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Type: Primo II Year of manufacture: 1996 Heidenhain TNC 430 control Spindle taper SK 50 Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Hodpfx Aeyl Uauef Usi Drive: 7.5 kW Weight: 4 t Price: EUR 2,500 plus VAT, ex location

Year of construction: 1967, condition: good (used), machine/vehicle number: 7011/C, table mounting size: 310 x 1400 mm table movement x: 950 mm table movement y: 325/345 mm table movement z: ca. 500 mm spindle turning speed range: 20 - 1500 rpm carriages longitudinal and cross: 18 - 620 mm/min carriages vertical: 18 - 620 mm/min electrical connection: 380 V kW space needed: 1900 x 1600 x 1750 mm weight: ca. 1500 kg Hjdpfod Rxw Hex Af Uei

Condition: ready for operation (used), Year of construction: 1990, Immediately available ex location: Milling machine Reckermann Type Delta 1300 Year of manufacture 1990 Hsdpfxoyl Uahs Af Uji Table 1400 x 400 mm Travel X/Y/Z 1000/400/450 mm SK 50 Spindle speeds 60 – 3600 rpm Drive 12.5 kW Dividing head Many tools Heidenhain 3-axis digital readout Weight 4 tons At a price of EUR 3,750.—plus VAT, ex location.

Condition: like new (used), Year of construction: 2020, Console milling machine Reckermann 1300 Kombi Hjdsx A Etfopfx Af Usi The machine is in absolutely mint condition. The customer did not receive the parts for which the machine was intended.

Condition: used, Universal milling machine, console milling machine SIMPLON type UN-S / Universa-Super Machine. No.: 17220 Year of construction 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm. 16 steps Feed X, Y, Z-axis 11 - 500 mm/min. Rapid traverse 2400 mm/min Motor power main spindle 4 KW Connected load 380 Volt, 50 Hz Hjdpfxoifu Ars Af Uei - 3-axis digital readout HEIDENHAIN, type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Right and left rotation of the milling spindle - Vertical milling head swivels +/- 90 - Boom can be moved manually 700 mm from the milling head - Manually extendable lateral counter bearing holder with dovetail guide 450 mm - Mechanical tool clamping with M16 tightening screw - Coolant device in the machine base - Electrical control cabinet on the machine Space requirement L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: used, Technical details: x-travel: 700 mm Hodpfx Afeva Hfho Uoi y-travel: 250 mm z-travel: 200 mm spindle taper ISO: SK40 range of revolution per miute: Spindel 32 - 2000 / 18 step U/min spindle head swivable left - right: 90 ° table surface area: 1000x400 mm weight approx.: k.A. kg dimension machine xH: 1,6 x 1,2 x 1,9 m with vise *

Year of construction: 2008, condition: ready for operation (used), Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible. Hjdpfx Aoulku Hef Uei

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) Hjdpfxety A Ehe Af Uji - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: good (used), Year of construction: 1996, Reckermann Kombi 1050 Console Milling Machine Reckermann Kombi 1050 with Heidenhain TNC 124 Control, Year of Manufacture 1996, in good CONDITION The machine comes from the training department of a renowned German mechanical engineering company. It was retired because its size was not suitable for the standard applications. Technical Data: Console Milling Machine RECKERMANN Model Kombi 1000 Year of Manufacture 1996 Control Unit: TNC 124 Heidenhain Hodpfx Aox N Euxjf Usi Technical Specifications: X-axis travel: 1,000 mm Y-axis travel: 350 mm Z-axis travel: 450 mm Distance spindle center to column: 50 - 500 mm Distance spindle center to table: 0 - 450 mm Table height above floor: 850 - 1,300 mm Clamping surface: 1,570 x 400 mm Number of T-slots: 5 T-slot width: 18 mm T-slot spacing: 70 mm Max. workpiece weight: 500 kg Tool holder: SK 40 Spindle speed range: 48 - 2,100 rpm Spindle drive power: 6.1 / 7.4 kW Number of gear steps: 16 Rapid traverse X-axis: 5 m/min Rapid traverse Y-axis: 5 m/min Rapid traverse Z-axis: 2 m/min Feed rate: 10 - 1,000 mm/min Feed force: 22 Nm Total connected load: 400 V Machine weight: approx. 4.0 t Space requirement: approx. 3.3 x 2.2 x 2.2 m Accessories and Equipment: - Heidenhain TNC 124 control unit - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Technical documentation, spare parts diagrams, control manual, and programming examples - Handwheels, coolant system, spindle brake About the Machine: Offered here is a console milling machine Reckermann Kombi 1050 with Heidenhain TNC 124 control, year 1996. This universal milling machine is in very good original condition. It comes from a facility where it was only used occasionally for training purposes. The control system is very user-friendly. The machine is equipped with hydraulic clamping in both vertical and horizontal positions. Conversion from vertical to horizontal operation is straightforward thanks to the swiveling vertical head. The guides are consistently lubricated with the central lubrication system. The Reckermann has been mechanically and electrically inspected by us. Take the opportunity to view and test the Reckermann under power at our premises. You can find further milling machines from renowned manufacturers on our website.

Condition: used, Year of construction: 1986, longitudinal travel 1200 mm vertical movement 600 mm cross travel 450 mm table-size 1500 x 600 mm max. table load 2 t spindle taper ISO 50 spindle drive 15 kW speeds 6 - 4000 U/min feeds 2 - 2500 mm/min rapid traverse 10 m/min voltage 400 V Bed milling machine with swivable spindle to horizontal or vertical. Hodpfx Afjxukpps Uji Control: Heidenhain TNC 155. Machine has an additional horizontal 4th axe.

Condition: new, Bernardo BF 45 HSV Drilling and milling machine Technical specifications Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm cutter head max. 80 mm throat 280 mm Spindle speed (12) 75 - 3200 rpm Spindle mounting MK 4 quill stroke 120 mm spindle sleeve feed (3) 0,10 / 0,18 / 0,26 mm/rev table size 730 x 210 mm T-slot size 14 mm Distance spindle / table max. 640 mm distance spindle / base plate max. 1190 mm Travel (x / y) 495 / 200 mm milling head swivelling -90° to +90° Height adjustment of milling head 260 mm column diameter 115 mm Working surface base plate 365 x 375 mm Motor output power S1 100% 1.1 / 1.5 kW (400 V) Motor input power S6 40% 1.5 / 2.2 kW (400 V) Machine dimensions (W x D X H) 1070 x 800 x 2060 mm Hsdpfxsgd H Uxe Af Usi Weight approx. 362 kg Scope of delivery - Quick-action drill chuck 3 - 16 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - Tightening spindle M 16 - Reducing bushing MK 4 / 3 - Combination arbor MK 4 / 27 mm - Automatic quill feed - Height-adjustable protective cover - Digital quill stroke display - Thread cutting device - Coolant device - LED machine light - Longitudinal measuring scale - Operating tool

Condition: repair required (used), feed length X-axis: 1,500 mm, feed length Y-axis: 600 mm, feed length Z-axis: 450 mm, Manufacturer: Reckermann Tip: Beta 10 Movements: X: 1500 mm Y: 600 mm Z: 450 mm Hjdpjuhnznefx Af Uji Control: Sinumerik 810M Y-axis does not move, it does not stand on a reference point!

Condition: used, Year of construction: 1990, Control Heidenhain TNC 355 x-travel 1.000 mm y-travel 400 mm z-travel 450 mm surface area 1.300 x 400 mm feed range 1 - 6.000 mm/min number of spindle speeds 60 - 3.600 U/min vertikal number of spindle speeds 30 - 1.800 U/min horizonta spindle taper SK50 +++++ Hodpfx Afod N Sngs Uoi Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Introducing the Servomill® KB 1500, a robust Conventional Vertical Milling Machine from KNUTH that excels in the milling machine category. Designed with servo-conventional feed technology, this versatile machine features a heavy-duty frame, wide guideways, and high drive power for superior cutting performance. Its universal milling head swivels in two planes, allowing you to achieve precise positioning at any angle. The integrated electronics facilitate easier and more precise conventional milling, ensuring an efficient workflow without necessitating programming. The Servomill® is perfect for substantial workpieces thanks to its extensive table dimensions of 2100 x 500 mm and high maximum workpiece weight. With enhanced features such as electronic handwheels, limit stops, and an automatic coolant system, users can enjoy increased reliability and performance. Whether you're in plant construction or machine building, this machine will meet your heavy-duty machining demands. Explore the extensive accessories available to maximize your milling capabilities. For further information or to order this reliable machine, please request a quote today. Hsdpfx Afswt Dvie Uoi

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, RECKERMANN KOMBI 1300 - Heidenhain TNC 114B - Console-type milling machine with Heidenhain TNC 114 B (NC path control) - Year of manufacture: 1987 - Very well-maintained original condition - Travels X/Y/Z: 1020x320x450 mm - Worktable size: 1370x400 mm - Horizontal / vertical milling unit - Vertical head swivels +/- 90 degrees - Vertical milling head with quill stroke 80 mm - Spindle stroke 80 mm - Speed range – vertical: 33 - 1800 rpm / 16 steps - Speed range – horizontal: 22 - 1200 rpm / 16 steps - Tool holder: ISO 50 - Automatic feeds / rapid traverse on all three axes - Feed speed X-axis: 10-1000 mm/min - Feed speed Y-axis: 10-1000 mm/min - Feed speed Z-axis: 4-400 mm/min - Drive power: 11 kW - Coolant system - Work lamp - Various arbors and machine-related accessories - Documentation Hodoxpiduspfx Af Uei Dimensions: LxWxH: 3.3x2.6x2.1 meters / Weight: 4500 kg Subject to errors or input mistakes.