Universal milling machine

SIMPLON "CU"

Condition: ready for operation (used), machine/vehicle number: 1124, table mounting size: 300 x 1300 mm table movement x: 950 mm table movement y: 220 mm table movement z: 400 mm spindle taper horizontal: MK 4 spindle turning speed range: 25 - 1250 rpm carriages longitudinal and cross: 7,5 - 635 mm/min carriages vertical: 3 - 250 mm/min electrical connection: 380 V, 4 kW Lodped H Ilrjfx Af Sohr space needed: 1670 x 1500 x 1580 mm weight: 2600 kg

Condition: used, Technical details: Ledpfx Afovc Avho Sehr x-travel: 700 mm y-travel: 450 mm z-travel: 450 mm spindle cone ISO: 40 (SK 40) table surface area: 760 x 420 mm table feed: längs: 10 - 500 (Eilgang: 1,4 m/min.) mm/min table feed: vertical: 5 - 250 (Eilgang: 1,4 m/min.) mm/min spindle turning speed - continuous: 32 - 1600 / 18 step U/min spindle head swivable left - right: 10 ° links / rechts ° quill stroke vertical: 125 mm feed continuous: 10 - 500 / 8 step mm/min rapid traverse: 1,4 m/min Total power requirement: 6,5 kW weight of the machine ca.: 3,0 t dimension machine xH: 2,3 x 2,0 x 1,85 m Further features: Headstock projection min./max.: 2094 / 2544 mm Equipment: -cooling water pump with feed -Linear path measuring system - Heidenhain ND750 Accessories: -Machine vice *

Condition: used, Universal milling machine, console milling machine SIMPLON type UN-S / Universa-Super Machine. No.: 17220 Year of construction 1979 Travel X: 900 mm, Y: 240 mm, Z: 400 mm Table size 1300 x 300 mm Tool holder SK 40 - M16 Spindle speed 50 - 1750 rpm. 16 steps Feed X, Y, Z-axis 11 - 500 mm/min. Rapid traverse 2400 mm/min Motor power main spindle 4 KW Connected load 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN, type VRZ 750 (X-scale missing) - Main spindle drive via 16 gear stages - Right and left rotation of the milling spindle - Vertical milling head swivels +/- 90 - Boom can be moved manually 700 mm from the milling head Ljdpfx Afsifu Aro Sshr - Manually extendable lateral counter bearing holder with dovetail guide 450 mm - Mechanical tool clamping with M16 tightening screw - Coolant device in the machine base - Electrical control cabinet on the machine Space requirement L x W x H 1600 x 1850 x 1850 mm Weight 2400 kg Good condition

Condition: new, Bernardo BF 45 HSV Drilling and milling machine Technical specifications Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm cutter head max. 80 mm throat 280 mm Spindle speed (12) 75 - 3200 rpm Spindle mounting MK 4 quill stroke 120 mm spindle sleeve feed (3) 0,10 / 0,18 / 0,26 mm/rev table size 730 x 210 mm T-slot size 14 mm Distance spindle / table max. 640 mm distance spindle / base plate max. 1190 mm Travel (x / y) 495 / 200 mm milling head swivelling -90° to +90° Height adjustment of milling head 260 mm column diameter 115 mm Working surface base plate 365 x 375 mm Motor output power S1 100% 1.1 / 1.5 kW (400 V) Motor input power S6 40% 1.5 / 2.2 kW (400 V) Machine dimensions (W x D X H) 1070 x 800 x 2060 mm Weight approx. 362 kg Scope of delivery - Quick-action drill chuck 3 - 16 mm / B 16 - Drill chuck mandrel MK 4 / B 16 - Tightening spindle M 16 - Reducing bushing MK 4 / 3 - Combination arbor MK 4 / 27 mm - Automatic quill feed - Height-adjustable protective cover - Digital quill stroke display - Thread cutting device - Coolant device Lhedpogd H Uxjfx Af Ssr - LED machine light - Longitudinal measuring scale - Operating tool

Condition: used, CNC Milling Machine ABENE Type VHF-360TI serial no. 36084 year of construction 2008 CNC control HEIDENHAIN TNC 320 Travel X: 650 mm, Y: 510 mm, Z: 450 mm Table size 1200 x 400 mm Spindle holder SK 40 Spindle speed 55 - 3000 rpm. 2 steps Feed speed 30 - 4000 mm/min. infinitely variable Rapid traverse speed (X + Y-axis) 4000 mm/min. Rapid traverse speed (Z-axis) 2000 mm/min. Spindle nose-to-table distance 20-495 mm Motor power spindle drive 7.5 kW Mains connection 400 Volt, 50 Hz - CNC contouring control HEIDENHAIN TNC 320 with RS232, USB and LAN interfaces - Electronic handwheel - mechanical handwheels for X and Y axis - Spindle speed manually switchable with 2 gear stages (stage 1 = 55-700 rpm) + (stage 2 = 701-3000 rpm) - Inclined bed concept with laterally mounted swivel spindle head +/- 50° - Manual inclined bed adjustment via hand crank - Hydro-mechanical tool clamping - Automatic central lubrication Lodpfx Aoty A Ehof Sshr - Coolant system with electric cooling lubricant pump opposite - Machine light - Switch cabinet permanently attached to the machine - Operating hours of control unit on = 14780 hours - Read operating hours machine on = 12980 hrs. - Read operating hours program run = 400 hrs. Space requirement L x W x H 2600 x 2000 x 2000 mm Weight 2500 kg Very good condition

Condition: new, Introducing the Servomill® KB 1500, a robust Conventional Vertical Milling Machine from KNUTH that excels in the milling machine category. Designed with servo-conventional feed technology, this versatile machine features a heavy-duty frame, wide guideways, and high drive power for superior cutting performance. Its universal milling head swivels in two planes, allowing you to achieve precise positioning at any angle. The integrated electronics facilitate easier and more precise conventional milling, ensuring an efficient workflow without necessitating programming. The Servomill® is perfect for substantial workpieces thanks to its extensive table dimensions of 2100 x 500 mm and high maximum workpiece weight. With enhanced features such as electronic handwheels, limit stops, and an automatic coolant system, users can enjoy increased reliability and performance. Whether you're in plant construction or machine building, this machine will meet your heavy-duty machining demands. Explore the extensive accessories available to maximize your milling capabilities. For further information or to order this reliable machine, please request a quote today. Lhsdpfxewt Dvis Af Sjr

Condition: new, Bernardo universal milling machine UWF 80 E incl. 3-axis digital display & y feed Technical specifications Table size 1000 x 240 mm ISO 40 spindle adaptor Spindle speeds vertical (8) 115-1750 U/min Spindle speed horizontally (9) 60-1350 RPM Quill stroke 125 mm Travel longitudinal (x) 590 mm Stroke transverse (y) 180 mm Travel vertical (z) 320 mm Distance from spindle / table 0-375 mm Throat depth 230-685 mm Swivel table 45 ° to + 45 ° Headstock Swivel range 90 ° to + 90 ° Feed range longitudinal (8) 32-700 mm / min T - slot size 16 mm Power vertical 0.85 / 1,5 kW Motor power horizontal 1.5 kW Lhjdpfx Afed Ertts Sor Machine dimensions (W x D x H) 1500 x 1430 x 2100 mm Weight 980 kg Scope of delivery • 3-axis digital display ES-12 H with LCD display • Tightening spindle M 16 • LED machine luminaires • Coolant system • Automatic platen feed for X-axis • Automatic platen feed for Y-axis • Adapter ISO 40/MK 3 • Adapter ISO 40/MK 2 • Adapter ISO 40/B 18 • Long milling ISO40/27 mm • Adjustable guard • Protective cover for horizontal milling • Horizon algal gene storage

Year of construction: 2021, condition: new, Bernardo Universal Milling Machine UWF 110 Servo -1000 Lhsdpfx Asg Hzbxof Sjr Technical specifications table size 1370 x 300 mm Spindle mounting ISO 40 mm spindle speed (11) 45 - 1660 rpm Travel lengthwise (x) 1000 mm traverse path cross (y) 360 mm Travel vertical (z) 400 mm Distance spindle / table 60 - 460 mm throat 95 - 575 mm Table can be tilted -45° to + 45 Max. workpiece weight workpiece weight 250 kg Feed range longitudinal / transverse (8) 30 - 830 mm/min Feed range vertical (8) 23 - 625 mm/min Rapid traverse x-, y- and z-axis 1000 / 1000 / 750 mm/min T-slots (number / width / distance) 3 / 14 mm / 80 mm Main motor 3,0 kW Servo motor (torque / power) 10 Nm / 1.5 kW Coolant pump power 60 W Coolant pump flow rate 12 l/min Machine dimensions (W x D x H) 1740 x 1860 x 1900 mm Weight approx. 1505 kg Scope of delivery - 3-axis digital display ES-12 H with LCD display - M16 tightening spindle - LED machine light - feed for x-, y- and z-axis - coolant device - counter bearing - Long milling arbor ISO 40 / 27 mm - Combination arbor ISO 40 / 27 mm - Coolant trough - Adjustable guard - Central lubrication for x-, y- and z-axis - Operating tool

Condition: good (used), Year of construction: 1995, Macmon M 100 E tool milling machine with 3-axis Elesta-Heidenhain digital display from the training department, rigid table, SK 40 spindle mount. Good working condition, can be demonstrated under power by arrangement. Lhsdpfev Azb Njx Af Ssr