Used welding sets for sale (403)

Condition: new, welding current max. 200 A open-circuit voltage 14 - 24 V connected load frequency 230 V weight 25 kg Dimensions (LxWxH) 500 x 200 x 300 mm Equipment: Hose package Ground cable Welding nozzles Lrjdog U Tccepfx Aaxog

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: P01740 F 01278 / 21, type of input current: AC, total height: 310 mm, total width: 430 mm, total length: 570 mm, input voltage: 230 V, overall weight: 48 kg, Equipment: type plate available, The UVR-300 universal vibrator enables fast and fully automatic feeding of various stud diameters up to M8 without the need for retooling and adjustment work. Condition: Slight signs of use, as the universal vibrator was only used once as a demonstration unit. Working range: SOYER threaded bolts and pins with flange M3, M4, M5, M6, Ø 7.1 and M8 from 6 - 40 mm in length Feed rate: approx. 20 - 50 studs/min, depending on dimensions Filling quantity: max. 6 kg Vibrator bowl Ø: 300 mm Compressed air: 5 - 7 bar Mains connection: 115/230 V, 50/60 Hz (115 V possible via ballast) Dimensions: 430 x 310 x 570 mm (W x H x D) Weight: 48 kg Lrsdpfx Aot Aktksaxjg Scope of delivery - Universal vibrator UVR 300 - Conversion kit for M3 - M8 We deliver free domicile, duty paid and taxed (DAP, duty paid).

Condition: used, 1 lot = 720 kg stick electrodes BÖHLER-THYSSEN Welding electrodes for manual arc welding Stored dry, supplied in 6 kg packages Type: Phoenix SH Yellow B + Phoenix Special Yellow AWS A5.1-91 Item no. 18952 Electrode diameter: Ø 5 mm Electrode length: 450 mm Lredjxcnktepfx Aaxog DIN: EN 499-E38 2 RB 12 - Rutile-basic stick electrode. - Easy welding of root passes, fill passes, and cover passes - Excellent positional welding properties - Suitable for radiographic-clean welding in pipeline, boiler, and tank construction - Can be used on shop-primer-coated plates - In unopened original packaging, warehouse stock Total weight: 720 kg

Condition: good (used), Messer Griesheim welding machine Unitig GW 300 with torch earth cable direct alternating current Ledpeugv S Ssfx Aaxorg

Condition: new, Year of construction: 2024, functionality: fully functional, laser wavelength: 1,064 nm, AL, ALM, ALW tilt and swivel optics (KSO), new 1 year guarantee, still packed. Other devices and accessories in stock on request. Sale only within the EU. Laser welding consumables, Lawitex starter pack. As a laser welding wire manufacturer, we can create a wire selection specifically for your wire selection specifically for your requirements, welding parameters are personally customized by us. explained and stored for easy retrieval. We supply original Alpha Laser spare parts, offer application product training and service at very good conditions. We are an official sales partner for Alpha Laser laser welding systems and, thanks to our almost 30 years of experience in the field of welding technology, we offer advanced laser welding technology from a single source. Ljdepcf Ntspfx Aaxjrg Inquiries, explanatory welding training and instructions (also by telephone) in: German, English and Polish Supplier Lawitex GmbH 40764 Langenfeld (Rhineland), DE

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current (min.): 10 A, welding current (max.): 300 A, For sale: Rehm Megapuls Focus 300 10-300 AMP 400 Volt Pulse Double Pulse Focus Arc Synergic Water-cooled 2/4 Step 4 Roller drive Down slope Spot welding Fixed programs Program memory Steel – Stainless Steel – Aluminum weldable Refurbished – serviced – tested Including PRO5000 welding torch, earth work lead with clamp, gas cable, and 3 months warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Lrodpex Ea Ezefx Aaxeg All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: good (used), 450 A with premium panel. 16 units available. Price per unit: €2,500 excl. VAT. Lrodpox Emufjfx Aaxeg

Condition: used, Synergy operation, simple handling, and job memory, combined with the proven Control Weld and Rapid Weld processes: thanks to these features, the QINEO Tronic welding power source delivers top welding results. Further advantages of the QINEO Tronic include its compact design, flexible configuration options, and optimal efficiency. The QINEO Tronic offers excellent value for money in manual welding applications. - Differentiated and precise: infinitely variable parameter adjustment for manual applications - Top quality: optimal ignition and welding characteristics - Superior results: synergy operation with intelligent one-button operation for all common materials, gases, and welding wires Lodpfx Asw I Ry Njaxsrg - Practical and flexible: wide range of applications thanks to its low weight

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language. In our offer we have a lot of welding machines we developed ourselves and they are all digitally and software based MIG MAG, MIG PULS SYNERGIC welding machines, also for robot welding with touch screen monitor, TIG ac dc with touch screen monitor, digital plasma cutting machines, electronics for controling the high pressure water jet pump, sand dispenser for water jet cutting, voltage THC with touch screen monitor... Lrjdpfemk S Sljx Aaxsg We are also very involved in innovation and development, please take a look at our other products, if you are a manufacturer, and are interested in discussing further, we are also selling know-how.

Condition: new, Year of construction: 2024, Handheld laser welder LWH-3000-N Relfar FWH20-S10A The kit includes: - laser welder with built-in cooling system - welding gun with adjustable focal length and an accessory kit - fiber laser source of MAX Photonics or Raycus - automatic wire feeder - set of cords - starter kit of protective lenses and nozzles Specifications - Laser source output 3000 W - Laser wavelength 1064 nm - Welding speed up to 120 mm/s - Power supply 3x400 Hz - Dimensions (including the laser head holder) 630x1300x1500 mm Price included One-day training along with machine installatio - 1 day up to 8 hours – machine installation and operational training. Relfar FWH20-S10A laser head - Welding, cutting and cleaning Ljdpfx Aajup Uzxoxerg Otinus laser welders are supplied with a set of nozzles and protective lenses designed for metal welding and cutting. Therefore, the device is versatile, and helps to save money by eliminating the possible need to purchase, for example, a manual plasma cutter. Operation Due to the revolutionary welding system, any user can achieve good working results after just a short training. The electrode feed cable allows the welder to work freely at multiple stations without having to relocate the device. The small heat affected zone prevents excessive distortion. The weld is placed very simply and quickly, creating a robust joint. Application The laser welder is designed for professional use in facilities requiring high-quality and aesthetic welds. Sources specifications 1000 W - Mild steel: up to 3mm - Stainless steel: up to 3mm - Aluminum: 2mm - Brass: 0,8 – 1mm 1500 W - Mild steel: up to 4mm - Stainless steel: up to 4mm - Aluminum: 3mm - Brass: 1mm 2000 W - Mild steel: up to 5mm - Stainless steel: up to 5mm - Aluminum: 4mm - Brass: 2mm 3000 W - Mild steel: do 8 mm - Stainless steel: do 8 mm - Aluminum: 7 mm Structure The gun cable ensures high freedom of movement making it easy to weld in different positions. The built-in controller with a large, transparent display is operated intuitively. The device is equipped with a powerful cooling system which allows it to work under harsh conditions in three shifts. Pronciple of operation The laser welding machine melts the welding wire and part edges using laser heat. Once the device is started and set up, the welding gun is applied at the beginning of the future welding line. Then, when the handle trigger is pressed, the beam is produced in the source and fed via a fibre optic cable to the gun head. The beam is focused and emitted towards the welding wire which feeds (via a feeder) to the contact point. Then, when the trigger is activated, the gun must travel along the welding line according to the wire feed rate. A water-circulated cooling system ensures a constant operating temperature of the source and gun. Radiation emission levels and cooling are controlled by a controller which adjustes the values according to user parameters.

Condition: used, functionality: unexamined, machine/vehicle number: Ultraweld-40, input voltage: 220 V, Used Amtech Ultraweld 40 ultrasonic metal welder with parts and controllers Manufacturer: Amtech Model: Ultraweld-40 (R4A actuator) Includes manual Lodjx A A Exopfx Aaxsrg

Condition: like new (used), Year of construction: 2018, Set for robotic plasma welding . Shipping to EU countries is our responsibility and the shipping cost is free. Lodpfx Ajrfuc Hoaxorg

Condition: refurbished (used), functionality: fully functional, welding current (max.): 280 A, Note: This is a Trade-in. Lrsdpfxjx Av Aws Aaxeg For sale: Saf-Fro Safmig 300 BLX 30-280 AMP 400 Volt 2/4 Step 4 Roller drive 12 Steps adjustable Soft start Spot welding Interval welding Steel – Stainless Steel welable Refurbished, serviced, and tested. Including a Parweld PRO3600 wlding torch, earth work lead, gas cable, and interconnection hose. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2024, functionality: fully functional, warranty duration: 36 months, type of cooling: air, welding current at 60% duty cycle: 180 A, welding current at 100% duty cycle: 140 A, welding current (min.): 2 A, welding current (max.): 220 A, OTC DTX 2200 AC/DC Metals that can be Welded: Steel – Stainless Steel – Aluminium 1A (DC) / 3A (AC) – 220A 30% 220A 60% 180A 100% 140A 230V 50/60Hz Pulse – Fast Pulse (0,5-500 Hz) – Ultra Fast Pulse (500-2000 Hz) ColdTack (0,01 – 10,0 Sec) Pre Gas (0,05 – 1,00 Sec) Post gas (0,5 – 25,0 Sec) Up Slope (0 – 5,0 Sec) Down Slope (0 – 8,0 Sec) Lrjdpfex Av Akox Aaxog Start Current (5 – 220A) End Current (5-220A) IP23S IEC 60974-1 IEC 60974-10 IEC60974-3 SR26 U/D 4M TIG Welding Torch Earth work Cable 35mm² 4m with Clamp Gas hose 24 Months Warranty Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, type of input current: three-phase, overall weight: 1,500 kg, input voltage: 230 V, total width: 2,450 mm, total height: 1,550 mm, total length: 10,000 mm, table height: 800 mm, positioning speed: 20,000 m/min, space requirement length: 10,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,500 mm, height adjustment type: pneumatic, ESAB E-Vent Plasma Cutting System + Hypertherm Powermax 1000 – Year of Manufacture 2006 – Defective / For Hobbyists For sale is an ESAB MXL-P 2000, E-Vent plasma cutting system (year 2006) including a Hypertherm Powermax 1000 plasma source. The machine is defective and is being sold as a non-working unit/parts donor. The Powermax 1000 is present; operational status has not been tested. Key technical data (ESAB E-Vent): * Machine length: approx. 7000 mm * Cutting length: approx. 6000 mm * Machine width: approx. 2450 mm * Cutting width: approx. 1500 mm * Machine height: approx. 1550 mm * Weight: approx. 1500 kg * Voltage: 230 V / 50 Hz, Power consumption 2 kVA Ideal for: * Refurbishment * Conversion to new control system * Parts procurement (gantry, guides, table, plasma source) Ledpfxex Ap Tpj Aaxjrg No warranty, no returns.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 10 h, functionality: fully functional, type of input current: three-phase, warranty duration: 36 months, type of cooling: water, welding current at 60% duty cycle: 500 A, welding current (min.): 2 A, welding current (max.): 500 A, For sale: OTC Welbee A500P Demo Model 2-500A 380-400 Volt 60% ED 500A AC TIG DC TIG AC-DC TIG Pulse Synergic Water-cooled 2/4 Takt High frequency Pre gas Post gas Start current End current Up slope Down slope AC Balance AC Frequency Lodjx Af Dqepfx Aaxjrg Pulse Frequency Spot welding Program memory Stick option Steel, Stainless Steel, and Aluminum weldable Including 4 Meter TIG Welding torch, earht work lead, gas cable, and 36 Months Warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, warranty duration: 3 months, type of cooling: air, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Pre gas Post gas Up slope Down slope Start current End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Lrsdpfxsx Afz Nj Aaxog All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2024, Title: Comprehensive Offer for Our State-of-the-Art Laser Welding System Included in the delivery are the following components and accessories: Laser welding system with integrated cooling system Welding gun with variable focal length and accompanying accessory set High-quality fiber laser source from Raycus Automatic wire feeder Complete set of hoses and cables Starter set including nozzles, safety glasses, and protective lenses Technical Specifications: Laser power: 1.5kW/ 2kW/ 3kW Laser wavelength: 1080 nm Welding speed: up to 120 mm/s Power supply: 230V, 32A Functionalities: Laser welding Laser-based weld seam cleaning Laser cutting Included in the price: One-day operator training and machine commissioning (up to 8 hours) Free home delivery Certifications: Including CE certificate Risk assessment Briefing We cordially invite you to test the device on-site. Location: 47799 Krefeld Please note that the prices mentioned above are exclusive of VAT. Lrsdpfx Aaen D Slwoxsg We look forward to your contact and are available for further questions at any time. This offer provides you an excellent opportunity to invest in a high-quality and versatile system.

Condition: used, Year of construction: 2019, functionality: fully functional, Amps.: 300 Watercooled: Yes. Control: TA 24. Year: 2019 Country of origin: Sweden. Size (L x W x H): 1150 x 620 x 1100 mm. Weight: 90 kg. With Esab water cooling unit, TA24 control panel and 4 m. TIG-hose. Lrsdjxzrzgopfx Aaxjg Machine have been tested and serviced.

Condition: excellent (used), Year of construction: 2012, CLOOS GLC 403 Quinto welding machine. A total of nine Cloos 403 machines are available. Year of manufacture: from 2005 to 2012. Other models of the Cloos 503 welding machines are in stock Lrjdpfetkunusx Aaxsg

Condition: excellent (used), 1 x TransPuls Synergic 5000R and 2 x TransPuls Synergic 4000R welding machines. Ljdpfx Aaetkuyijxsrg Attention: the price is only for one welding machine

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Lsdstkuk Rspfx Aaxorg

Condition: like new (used), Year of construction: 2023, functionality: fully functional, EWM Phoenix 452 Puls Multimatrix Mig Mag welding machine Year of manufacture: 2023. Lrjdpjtkuvxjfx Aaxjg unused still in original packaging.

Condition: used, current capacity 8,0 kVA throat 80 - 480 mm contact pressure capacity 17 - 235 daN Lrodpsxtqv Tefx Aaxog horn spacing 140 mm mm rated capacity 8,0 kVA voltage 380 V total power requirement 17,8 kVA weight of the machine ca. 77,5 kg dimensions of the machine ca. 0,35 x 0,80 x 1,05 m - Serial-No.: 18310126 - 2

Condition: used, Year of construction: 2023, operating hours: 300 h, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, Hardly used Böhler Terra NX 400A available for sale Lrsdpfsx Dy R Uox Aaxeg