Used Tool milling machines - NC/CNC 500-699mm X-axis travel for sale (29)

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, Tool milling machine Kunzmann WF 600M with Heidenhain TNC 124 control NEW Mint condition CE-compliant !!! Technical data: >> Year of construction 2013 Machine-No.610261 >> Milling table clamping surface 800 x 425 mm Clamping grooves 6 Slot width 14 H 7 Slot spacing 63 mm Maximum load 300 kg >> Speeds S I 1 - 1125 min-1 Speeds S II 1126 - 4500 min-1 >> Feed rate (potentiometer 100 %) 0 - 2000 mm/min. Rapid traverse X and Y 5000 mm/min. Rapid traverse Z 4000 mm/min. Dcslhcceurv T Isqkji >> Traverse paths X/Y/Z: 600/400/400 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic tightening system >> Weight approx. 2000 kg >> Approx. dimensions: 2 x 2 x 2 m >> Main drive motor: 5.5 kW Accessories and equipment: >> Heidenhain TNC 124 control >> Heidenhain HR410 electronic handwheel >> Vertical and horizontal hydraulic clamping >> Chip flushing gun >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions >> Coolant system About the machine : We are offering a Kunzmann WF 600M tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in mint condition. It comes from a large company where it was only used a little for training. A very easy to operate control. The machine also has vertical and horizontal hydraulic clamping. It is very easy to convert from vertical to horizontal by folding away the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically tested by us. Take the opportunity to inspect and try out the Kunzmann on site under power. Two identical machines are available.

Condition: ready for operation (used), CNC Milling Machine, Deckel FP4NC, Used machine Manufacturer: Deckel Model: FP4NC Serial number: 31549 Travel range (per axis): X-axis: 560 mm Y-axis: 500 mm Z-axis: 450 mm Table specifications: Length: 900 mm Width: 530 mm Max load capacity: 450 kg Feed rates: X-axis: 3600 mm/min Y-axis: 3600 mm/min Z-axis: 3600 mm/min Delhcjwrdu Aocqksci Spindle specifications: Spindle taper: ISO 40 / BT / MK Spindle power: 7.5 kW Max speed: 5000 RPM

Condition: new, Year of construction: 2025, Functionality: fully functional, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 10 rpm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 5,000 m/min, rapid traverse Z-axis: 5,000 m/min, table length: 800 mm, table width: 400 mm, total height: 1,990 mm, total length: 2,100 mm, total width: 2,190 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 10 rpm, overall weight: 2,370 kg, table load: 300 kg, workpiece weight (max.): 300 kg, Equipment: documentation/manual, rotational speed infinitely variable, When space is at a premium and maximum accuracy is required, conventional milling machines are in demand. The cycle-controlled milling machines offer an economical alternative for the production of small batches or larger workpieces.Machine highlights:- Pivoting control panel- Right/left rotation of the main spindle- All pinching points eliminated by covers- Hardened and ground shafts and gearwheels- Linear guides- Main motor with spindle brake- Quadruple-bearing radial/axial milling spindle- Sinumerik 828D or Heidenhain TNC 620working area:- Traverse path in X/Y/Z: 600 / 400 / 400 mm Distance spindle nose table: 230 - 630 mm (horizontal milling spindle) - Rapid traverse speed X/Y/Z: 5000 mm/min- Working feed X/Y/Z: 10 - 2000 mm/min- Max. travel distance in X/Y/Z: 600 / 400 / 400 mm- Max. travel distance spindle nose table: 230 - 630 mm (horizontal milling spindle) - Max. travel distance X/Y/Z: 5000 mm/min- Max. travel distance X/Y/Z: 10 - 2000 mm/min- Max. travel distance X/Y/Z: 630 mm Feed force in X/Y/Z: 10 / 10 / 15 kN- Clamping surface: 800 x 400 (rigid angular table)- Max. feed force in X/Y/Z: 10 / 10 / 15 kN- Max. feed force in X/Y/Z: 10 / 15 kN- Max. feed force in X/Y/Z: 800 x 400 (rigid angular table) Table load: 300 kg (rigid angular table)Vertical milling head:- Speed range: 10-5000 rpm- Power: 13 kW Djlhsd D I Tmjccqkeci

Condition: used, x-travel 500 mm y-travel 380 mm z-travel 350 mm speeds 20 - 5000 U/min table surface area 800 x 355 mm tool taper SK 40 control HEIDENHAIN TNC 124 total power requirement 6,0 kW weight of the machine ca. 1800 kg dimensions of the machine ca. 2210 x 2680 x 1965 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours Dolovuz Rushccqkoci - Machine light - Machine feet - Operation manual

Condition: good (used), Second-hand machine in good condition Control type: Conventional active digital Location : 35708 Haiger Price : 13.500€ excl. Technical data: Digital display 3-axis digital display HEIDENHEIN TNC 134 Travel X-axis 500 mm Travel Y-axis 350 mm Travel Z-axis 380 mm Tool holder Vertical milling head SK 40 with hydr. tool clamping DIN 2080 ring groove Table type Fixed table Table clamping surface 800 x 360 mm T-slot size 14 mm Weight 1,600 kg Dimensions 1500 x 2000 x 1900 mm Dolhccqjigv Ipekjci Accessories - Central lubrication - coolant system - Operating instructions

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Kunzmann WF 600 M milling machine (2012) Manufacturer: Kunzmann Type: WF 600 M Year of manufacture: 2012 Condition: used, very good Control: Heidenhain TNC 124 X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Djlhccjwp Hv Reqksci Table length 650 mm Table width 350 mm Spindle speed 4500 rpm Vertical spindle and horizontal spindle - SK40 Hydraulic tightening system Main drive motor: 5.5 kW Dimensions approx.: 2 x 2 x 2 m Weight approx. 2000 kg Coolant system Scope of delivery: - Documentation - Machine light - Machine feet - Machine vice

Condition: used, CNC universal tool milling machine HERMLE type UWF 900 E Machine No. 10829, Year of manufacture 1995 CNC contouring control Heidenhain TNC 415 B NC software 280540, PLC software 277677 06 Travel paths X: 600 mm, Y: 400 mm, Z: 400 mm Table size 900 x 458 mm Spindle mount ISO 40 Distance table to spindle nose 40 to 440 mm Spindle speed 20 - 4000 rpm, continuously variable Feed rate 1 to 3000 mm/min Rapid traverse X and Y = 7 m/min. Z = 6 m/min. Spindle drive 7 kW Quill stroke (vertical head) 60 mm - Spindle speed via 2 gear stages and continuously variable via frequency converter Dslhccswaaqieqkoci - Hydro-mechanical tool clamping vertically and horizontally - Thread cutting without compensating chuck - Electronic handwheel - RENISHAW 3D scanning head - Coolant system adjacent, capacity approx. 130 liters - Automatic central lubrication system - Fixed angle table - Fully protective cabin - 32,279 recorded spindle operating hours - Pivoting control panel - Operating instructions and electrical diagram Space requirements L x W x H 2700 x 3500 x 2100 mm Weight 3 tons.

Condition: like new (used), Year of construction: 2020, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 10 rpm, table length: 800 mm, table width: 320 mm, overall weight: 2,800 kg, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, OPTImill F 105 Sinumerik 808D ADVANCED CNC Milling Machine ORIGINAL PICTURES: Will be provided on request. Manufacturer: Optimum Model: OPTImill F 105 Control: Siemens Sinumerik 808D ADVANCED Year of manufacture: 2020 Condition: Very good Availability: Immediately Original price was €56,000 Technical Data: - Travel paths: X-axis automatic 550 mm Y-axis automatic 305 mm Z-axis automatic 460 mm - Max. spindle speed: 10,000 min⁻¹ - Carousel tool changer: 12 tool positions - Linear guides: All with stainless steel covers - Automatic central lubrication - Siemens main spindle motor - Siemens servo drive: Closed-loop control on all axes - Machine light in working area - Portable electronic handwheel: With enabling button and emergency stop switch - Coolant system: 120-liter coolant tank - Heavy-duty, precision milling table: Large dimensions and precision-machined surface - Generously sized access doors: Minimize cleaning and maintenance time - Software package “SINUMERIK 808D on PC” Dimensions and weights: Length approx. 2164 mm Width/depth approx. 1860 mm Height approx. 2200 mm Weight approx. 2800 kg Drilling-milling performance: Max. face mill size 70 mm Max. end mill size 35 mm Rapid traverse speeds: X-axis 15,000 mm/min Y-axis 15,000 mm/min Z-axis 15,000 mm/min Electrical data: Connection voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 15 kVA Horizontal milling table: Length 800 mm Width 320 mm Vertical spindle-table distance min. 100 mm Vertical spindle-table distance max. 600 mm T-slot size 14 mm T-slot number 3 T-slot spacing 100 mm Max. table load 300 kg Accuracy: Repeatability ± 0.008 mm Positioning accuracy ± 0.008 mm Dolhetpnbbeccqkeci Coolant system: Coolant pump(s) drive power 650 W Coolant tank capacity 120 l Pneumatic connection Operating pressure 7 bar Vertical spindle: Spindle taper BT 40 Speed range 10 – 10,000 min⁻¹ Spindle drive motor power S1 continuous duty 7.5 kW Spindle drive motor power S6-30% duty 11 kW Spindle drive motor torque S1 continuous duty 48 Nm Spindle drive motor torque S6-30% duty 70 Nm Feed motor torque: X-axis S1 continuous duty 8 Nm Y-axis S1 continuous duty 8 Nm Z-axis S1 continuous duty 11 Nm Tool changer: Type Carousel Number of tool stations 12 Tools: Max. tool diameter 70 mm Max. tool length 300 mm Max. tool weight 6 kg Tool change time (tool to tool, T to T) Scope of delivery: - CNC milling machine OPTImill F 105 Sinumerik 808D ADVANCED - “SINUMERIK 808D on PC” software package - Machine light - Portable electronic handwheel - Coolant facility - Accessories and equipment options - Electropneumatic tool clamping system - Additional tools and holders - Extended software packages for special applications The machine is located in Graz and is in excellent condition. An on-site inspection or a video call demonstration can be arranged. Contact us for further information or to schedule a viewing appointment!

Condition: used, Year of construction: 1983, Technical details: Dolhccowgdz Eeqkeci x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 400 mm z-travel 420 mm control TNC 355 Heidenhain Main spindle: turning speed range - main spindle 20 - 4.000 min/-1 power capacity - main spindel 7 kW transmission ratio 3 tool taper SK 40 distance spindle /table 127 - 567 mm spindle diameter in front bearing 55 mm stroke of quill vertical 75 mm tool clamping 10 kN swivellable +/- 90 ° work table: table surface area 900 x 458 mm T-slots 7x 63 x 14H7 feeds: feed range 1 - 5.000 mm/min Feed force 5,4 kN rapid traverse ( X / Y / Z ) 7 / 7 / 6 m/min total power requirement 13 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 4,0 x 4,0 x 2,1 m Dcolhcetqmm Aocqksi Tool Room Milling Machine - Universal HERMLE - UWF 900 E - Spindle-Head swivable +/- 90°

Condition: used, Year of construction: 1989, x-travel 600 mm y-travel 450 mm z-travel 400 mm Dcjlhccqjtqqn Dsksi table-size 850 x 440 mm spindle taper SK 40 control HEIDENHAIN TNC 355 ATC 32 Pos spindle turning speed range 20 - 4000 U/min spindle drive 5,9 kW quill stroke 80 mm feeds longditudinal/cross/vertical 1 - 2000 mm/min power feed x/y/z 7200 N rapid traverse longitudinal and cross 10 m/min rapid traverse vertical 10 m/min total power requirement 12 kW weight of the machine ca. 3 t dimensions 2,7 x 2,5 x 2,0 m Acc.: NC-dividing unit (=4th axis) make WALTER with 3-jaw chuck 160 mmø, vertical head with hydr. tool clamping and quill retraction, solid table, various tool fixtures, electron. hand wheel, coolant

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min Delhjcxxq Doccqkoci table surface area:400 x 800 mm tool taper:SK 40 total power requirement:7,8 kW weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: excellent (used), Year of construction: 2000, including accessories, tool holders, documentation Djlhccowqq Awjqkjci

Year of construction: 1999, Condition: used, CNC Steuerung Heidenhain TNC 426 Kuehlmitteleinrichtung Spaenewanne CNC control Heidenhain TNC 426 coolant device chip tank Technische Daten / technical details: X-Weg / X-travel 600 mm Djlhjdk Rwnoccqkjci Y-Weg / Y-travel 525 mm Z-Weg / Z-travel 500 mm Spindeldrehzahlen / spindle speed 6300 UpM /rpm Werkzeugaufnahme / spindle taper SK40 Vorschubbereich X/Y/Z / feed range 10000 mm/min. Universaltisch / clamping area of universal table 750x530 mm Gewicht der Maschine ca. / weight 6500 kg

Condition: used, Year of construction: 1980, Functionality: fully functional, machine/vehicle number: 956.71.80.274, feed length Y-axis: 500 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, input voltage: 400 V, Equipment: documentation/manual, The system shown is in perfect condition and ready for immediate use. No heavy roughing work has ever been performed with this machine. The machine is being sold together with a vise, including a tool cabinet with the shown contents. Additionally, it comes with 2 sets of ground supports and approximately 80 cutters, all in usable condition (some barely used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum. Dcslhcownq Sgscqksi

Condition: used, Year of construction: 2006, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 U/min power capacity - main spindel 9 / 13 kW Torque 57 / 82 Nm tool taper SK 40 table surface area 630 x 500 mm Tilting area -5 / +110 ° max. table load 200 kg T-slots 14 H7 T-slot - distance 63 mm C-Axis +/- 360 ° rapid travel ( X / Y / Z ) 12 m/min feed speeds 10.000 mm/min Tooling 16 pos. max. tool weight 6 kg max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm tool taper SK 40 Dolovanqxjhccqkeci total power requirement 17 kVA weight of the machine ca. 3,6 t dimensions of the machine ca. 3,0 x 3,0 x 2,5 m Tool Room Milling Machine - Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - only 10.071 Spindle Hours - WITHOUT tools

Condition: used, Year of construction: 1990, x-travel 600 mm y-travel 450 mm z-travel 450 mm control PHILIPS CNC 432 table surface area 740 x 440 mm spindle taper SK 40 spindle turning speed range 20 - 5000 U/min feeds 1 - 4000 mm/min rapid traverse 6 m/min quill stroke 80 mm toolpiece magazine: chain magazine 30 Pos tool diameter if 2 vacant positions max. 130 mm tool diametre at full load 100 mm tool length - max. 250 mm weight of tools max. 8 kg Dslhccstq I Hqjqkeci total power requirement 15 kVA weight of the machine ca. 3,8 t Accessories: vertical head with hydr. tool clamping and quil retraction, univ. table (manual), electron. handwheel, coolant

Condition: used, Year of construction: 1985, machine/vehicle number: 2204 - 0469, x-travel:580 mm y-travel:400 mm z-travel:450 (390*) mm Dcolhcjcxxwaocqksi table-size:460 x 800 mm spindle speeds:40 - 4000 U/min feed range:2 - 3600 mm/min feed:4.0 m/min spindle taper:SK 40 dimensions of the machine ca.:3,0 x 2,10 x 2,10 m spindle motor:4,0 kW control:Contour 2 The Deckel FP4 A Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (Right or left) - Angular Fixed Work Table: 800 x 460 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 4.0 kw Motor for Main Spindle. - Central Lubrication and Coolant system, Seperate Power cabin - Chip tray with Splash protection offering More clean and safe working envoirnment.

Condition: good (used), For sale are various Deckel FP3 milling machines, which are all in good condition. The machine was cleaned and tested by us. If desired, safety devices can also be mounted for an additional charge. L x W x H: approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg Dcslhjiz T Eujccqkei TECHNICAL DATA Digital display: 3 - axes - digital display travels: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Cjjvhhya2v Drive power: approx. 3.8 kW Tool clamping: manual feeds & rapid traverse: in all 3 axes Feed range: approx. 10 - 500 mm/min Rapid feeds: approx. 1.5 m/min Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Year of construction: 2001, Condition: good (used), Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Dcslhccsit Tr Teqkji Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 1995, Machine type: CNC universal tool milling machine Manufacturer: DECKEL Model: FP 4-60 Year of manufacture: 1995 Condition: very good Offer type: used machine Technical data: Control: Dialog 12 Table: 900 x 520 mm Travel range: x = 600 mm y = 500 mm z = 450 mm Stroke: Quill stroke 80 mm Speed range: 31.5 - 5000 rpm Tool holder: SK 40 Drive: 7.5 kW Remark: Automatic tool clamping, electric handwheel, coolant device, Dcslhccqstvnglekoi complete documentation Weight: 4100 kg The machine is in very good condition and ready for immediate use and can be inspected and demonstrated at our premises. We would be delighted if you are interested in our offer. Subject to errors, changes and prior sale.

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; stroke: 100 mm; table: 800x480 mm Dceljlkgvbohccqksi travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: used, Year of construction: 2000, x-travel 600 mm y-travel 400 mm z-travel 400 mm table surface area 800 x 400 mm spindle taper SK 40 control HEIDENHAIN TNC 310 spindle turning speed range 10 - 3150 U/min spindle drive 5,5 kW feed - longitudinal/cross 1 - 5000 mm/min feeds vertical 0,5 - 2500 mm/min Dcolhcceux Agijqkoi rapid traverse 6 / 6 / 3 m/min total power requirement 10 kVA weight of the machine ca. 2,5 t dimensions of machine L x W x H 2,16 x 1,70 x 2,0 m Accessories: solid table, vertical head with hydr. tool clamping and quill retraction, electron. handwheel, coolant

Condition: used, Year of construction: 1984, x-travel:500 mm y-travel:400 mm z-travel:400 mm table-size:700 x 470 mm Dolhccocxxypoqkjci spindle turning speed range:40 - 4000 U/min feed range:02 - 3600 mm/min rapid traverse speed:4,0 m/min quill stroke:90 mm spindle taper:SK 40 control:Deckel Dialog 3 power capacity - milling spindle:3 kW total power requirement:22 kW weight of the machine ca.:1,8 t Deckel FP3 NC Universal Milling Machine - CNC - Spilndle Head can be swiveled 90 ° (left or Right) - Work Table: 700 x 470 mm - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Portable Handheld operating unit for easy control of machine - 3.0 kw Motor for Main Spindle - Deckel Dialog 3 CNC control Systems - Seperate Power Cabin, Central Lubrication and Coolant System and Chip tray with Splash cabin

Condition: excellent (used), Year of construction: 1986, x-travel 500 mm y-travel 430 mm z-travel 400 mm table surface area 800 x 390 mm spindle taper SK 40 spindle turning speed range 40 - 2000 U/min spindle drive 3 kW quill stroke 80 mm feed - longitudinal/cross 4 - 1600 mm/min Delhcowi Ugdscqkeci feeds vertical 4 - 1000 mm/min rapid motion -longitudinal/cross/vertical 1,6 / 1,6 / 1,0 m/min control HEIDENHAIN, TNC 135 total power requirement 5 kW weight of the machine ca. 1,4 t dimensions of machine L x W x H 2,3 x 2,3 x 1,7 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant