Used Mc Cormick Mtx 150 for sale (22,783)

Condition: new, neu ca. 4 Monate ab Auftragse Italien 66700 € 1340.67 € 150 to 500 mm 1.550 x 2.000 mm 800 mm 20 mm/s 3 mm/s 2350 mm 2000 mm 2500 mm Belqjuhdmgs R Rfrowl 4100 kg horizontal verschiebbar 1550 mm 1000 mm 1300 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve

Year of construction: 2018, Condition: as good as new (ex-display), machine/vehicle number: 1606-I0019, Oil cooler for DMG SL-150 MC machine Weight: 68 KG Dimensions L x W x H: approx. 1040 x 320 x 400 mm Max. 5 operating hours Belq R Rjiby Sksfrswl Manufacturer according to label: Kouwakougyo Co. LTD.

Condition: good (used), Year of construction: 2012, Functionality: fully functional, We request your binding offer. Technical specifications: • Machine is fully functional, assembled, and ready to test. • Nordsen hot melt unit for inserting transparent plastic envelopes. • High speeds of up to 12,000 inserts/hour for DIN C6/5 and up to 10,000 inserts/hour for DIN C6/5. for DIN C4 • Easy conversion to different production formats • CMC A15Q • CMC A14Q • CMC Sep_1 Belqsv Iy Tzs R Rfrswl • CMC F15 • CMC SkyJump • CMC A14 • CMC 150 • CMC Bypass (Standard) • CMC OEM • CMC BUSKRO – Integration • CMC Spare Part Kit • CMC RA20_z • CMC PC – Add • Vacuum Pump Accessories: • Top Seno Camera System • Output reading and 4 cameras for calibration • Nordsen hot melt glue gun with unused accessories such as guns, etc. Available from: immediately Delivery terms: ex works – EXW (Brandenburg) Payment terms: Payment before pickup Accessories are not guaranteed. The following applies: "Item sold as seen." The prospective buyer must verify the completeness of the item on site.

Year of construction: 1985, Condition: used, Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 18856 Specifications: - 1985 model - Everything comes with it - Controll box - Engine - 3 Transport lines - Small sieve - Ready for delivery Description: Bwolqsvgybpj R Rfrsl Older cubisator sold with 3 transport belts and a small sieve. Ready for delivery

Condition: ready for operation (used), Year of construction: 1988, Functionality: fully functional, total length: 1,440 mm, total width: 710 mm, total height: 1,300 mm, type of input current: three-phase, overall weight: 450 kg, grinding belt width: 150 mm, extraction connection diameter: 140 mm, rotational speed (min.): 1,480 rpm, rotational speed (max.): 2,840 rpm, type of motor: three-phase motor, SAMCO Unilev150 double-sided edge grinder Specification: - condition - used - manufacturer - SAMCO - model - Unilev 150 -working height - 150 mm - grinding belt dimensions 150 x 2150 mm - two speeds of grinding belt - rollers for grinding inner curves - tops with dimensions 22 x 144 cm - both tops adjustable in angle from 0-30 degrees - motor power - 3,0 kW - pneumatic tensioning and oscillation of the belt - adjustable veneer sanding visor on one side and " back" 15x75 cm on the other side - attachment, protractor for sanding at an angle Bwjlq R Rfothh Rrsrsl - extraction stub - fi 140 mm - year of production - 1988 - weight - approx. 450 kg - overall dimensions 144 x 71 x 130 cm ( l. x w. x h. ) Additional information: - very good, factory technical and visual condition - the pictures show the actual state of the object of sale - possibility to turn on and check the device on site - the price given in the auction does not include VAT

Year of construction: 2016, Condition: like new (used), Anton Paar MCP 150 Polarimeter – Used, Excellent Condition This Anton Paar MCP 150 Polarimeter is offered in excellent condition from a well-maintained GMP-compliant laboratory. Ideal for laboratories requiring precise optical rotation measurements and full 21 CFR Part 11 compliance, especially in pharmaceutical, fragrance, and food quality control applications. Key Features: - Model: MCP 150 - Wavelength: 589 nm (LED) - Measuring range: ±89.9°, resolution 0.001°, accuracy ±0.01°, repeatability ±0.01° - Peltier temperature control (15–35 °C), with ±0.1 °C accuracy - Compact design: 370 × 320 × 130 mm, 8.6 kg - Interfaces: USB, Ethernet, RS232, CAN bus - Compliant with: 21 CFR Part 11, Ph. Eur., USP, JP, GAMP5, GMP Included Accessories: - Quartz control plate (+8°Z, +3°OR) with Toolmaster™ wireless ID - 100 mm stainless steel polarimetry tube with Luer adapter and Peltier temperature control - USB dongle for Anton Paar PS software license - Full original documentation including: - Installation Qualification (IQ) - Calibration certificates - User manual (German) Bolq R Rfjwbhktjrewl Condition: Used, but in excellent working condition. Device and accessories are clean, well-maintained, and fully functional. Directly from a controlled GMP environment Located in Liestal, Switzerland.
Contact for quotation, shipping, or inspection.

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: 40 mm -Piston rod: Ø 20 mm -Stroke: 150 mm -universally applicable: -Number: 1x available -Price: per piece -Dimensions: Ø 50/H445 mm Bjlq Rsd Erv Te Rfrowl -Weight: 6 kg

Condition: good (used), Year of construction: 1997, travel distance X-axis: 630 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 560 mm, 2 identical machines are available Belsuc Sgdeq R Rfrewl UNIPRO 90 control system IBN of the machines 1998 Machine has a fully-fledged 4th axis (rotary table) Offer on request

Condition: good (used), Year of construction: 1997, There are 2 machines available Heller MCPH 150 / 2 machines for sale, year of construction 1997, Control Unipro 90, travel X/Y/Z 630/520/570 mm, tool changer 52 times, SK 40 holder, spindle speed up to 8,000 rpm, 2-fold pallet 400 x 500 mm, IKZ 50 bar, Knoll coolant system, 4 axis 0.001°, Bwolsugtl Aoq R Rfrel chip conveyor, many parts have already been replaced, spare parts package available,

Year of construction: 1991, Condition: excellent (used), Functionality: fully functional, overall weight: 520 kg, Pump was operated on a test bench and has only run for very few operating hours. Bwslorfdttoq R Rfrsl Flow rate: 400 m³/h ( 111 liters / second ) Delivery head / delivery pressure: 19 meters / 1.9 bar Pump speed: 1450 1/min NPSH required: 3.83 m Efficiency: 85.7% Shaft power: 24.04 kW Impeller diameter: reduced 264.5 mm (maximum Ø 269 mm) Shaft seal: single mechanical seal Manufacturer: Burgmann Impeller type: closed radial impeller Bearing type: roller bearing Lubrication type: Grease Materials of construction Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: 1.4462 Impeller: 1.4408 (AISI 316) Bearing bracket: Cast iron EN-GJL-250 Shaft sleeve: CrNiMo steel Nominal size of suction nozzle: DN 200 Discharge connection Nominal diameter: DN 150 Nominal pressure suction PN 16 Nominal pressure pressure PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH with intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM Type: KPER 200 L4 Efficiency class: IE 0 Motor speed: 1435 1/min Frequency: 50 Hz Rated voltage: 380 / 660 V Rated motor power: P2: 30 kW Thermal class: F Motor protection class: IP54 Cosphi: 0.82 Dimensions: Length: 1600 mm Width: 650 mm Height: 820 mm Weight: 520 kg

Year of construction: 2023, Condition: new, PLASMA CUTTING MACHINE MODEL MTX 1500/3000 Construction: steel+aluminium Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive: 4Nm stepper motors with gears, precision grade 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Bslq Roh Rabno Rfrswl Z axis control system: THC My plasma system Collision protection system to prevent burner damage Linear guide: TBI Automatic material detection system Power supply: 240V Maximum load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -exchangeable grate -control software in German, English, Polish -Certification of conformity CE - DTR - warranty The possibility of selecting the appropriate Hypertherm cutter to individual needs of the company.

Condition: ready for operation (used), CMC 3515000M5000TAC-FO PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Belqsi D Hnus R Rfrswl

Condition: new, Year of construction: 2024, Special price: €45,000 (instead of €52,500) excl. VAT. Available immediately! Included Premium Features: - Heidenhain ND5023 3-Axis Position Readout Bslqspq R Rde R Rfrowl - 5-Position Longitudinal Stop for the Saddle - SRW-Amestra Multifix C Quick-Change Toolholder with 4 Inserts - LED Workstation Lighting - Set of Spinelli Leveling Pads Standard Features: - Double Mechanical Clutch - Electromagnetic Brake - Rapid Traverses - Air Device on the Tailstock to Facilitate Movement Along the Bed - Cast Iron Bed, Legs, Headstock, Tailstock, and Slide - Bed Guides are Induction-Hardened and Ground - Headstock with Induction-Hardened and Ground Gears - Spindle Mounted on High-Precision Bearings - Friction-Free Slide Sliding - Electrical System in an Airtight Cabinet with Siemens and/or Schneider Components - Spindle Reduction Sleeve - 2 Dead Centers - Chuck Guard with Microswitch Turret Plexiglas guard, rear guard along the entire length of the machine, lead screw and feed rod guards, emergency stop button - Chip tank on wheels - Cooling system with electric pump - Central lubrication of the guideways with automatic pump - Follow and fixed steady rest - Service tools and wrenches, test certificate, electrical diagram, operation and maintenance manual - Machine built according to EC standards Optional equipment: - 3-/4-jaw chuck Technical specifications - Center height: 260 mm - Swing over bed: 520 mm - Swing over carriage: 300 mm - Swing without bridge: 690 mm - Distance between centers: 1500 mm - Bed width: 400 mm - Spindle bore: 105 mm - Spindle nose: 11" Camlock - Spindle speeds: 12 - Spindle speeds: 16 - 1200 rpm - Main motor power (S1 - 100%): 7.5 kW (optional 9.2 kW) - Longitudinal feed: (93) 0.028 - 6.43 / (65) 0.063 - 2.52 mm/rev - Cross feed: (93) 0.012 - 2.73 / (65) 0.027 - 1.07 mm/rev - Metric threads: (54) 0.5 - 224 / (22) 1 - 14 mm - Whitworth: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modular threads: (54) 0.5 - 112 / (18) 0.5 - 7 mm - Diametrical pitch: (54) 1/4 - 64 / (24) 4 - 56 dp - Cross slide travel: 340 mm - Top slide travel: 150 mm - Tailstock quill diameter: 85 mm - Tailstock quill stroke: 200 mm - Tailstock quill mount: MK5 - Total weight: 3200 kg

Condition: ready for operation (used), Year of construction: 2017, 5-AXIS MACHINING CENTER Brand: EMCO MECOF Type: UMILL 1500 Year: 2017 NC: HEIDENHAIN TNC640 HTCI Equipped with: 88-position tool changer 70 bar center coolant Chip conveyor Tool probe Part probe Specifications: Table surface diameter: 1400 x 1200 mm X-axis travel: 1500 mm Y-axis travel: 1500 mm Z-axis travel: 1100 mm B axis -/+185° C axis: 360,000 positions Max. load: Table weight 4,500 kg Spindle speed 1 - 12,000 rpm Bslov Uqv Hoq R Rfrewl Spindle power (electric spindle) 58 kW Spindle taper HSK100-A Rapid feed 60 m/min Machine dimensions approximately 7,200 x 6,200 x H 4,200 mm

Condition: excellent (used), Here we offer you an Omron SCARA industrial robot. Omron SCARA Industrial Robot with PB Programming Box R6Y XGL400 XG Series SCARA robots for industrial applications: - Higher reliability (no belts on XG series, no moving electronic parts). - High precision and speed - Minimal maintenance - Ease of use - High rigidity - Very compact design SCARA, reach: 400 mm, vertical stroke: 150 mm, max. payload: 5 kg Max. Payload range: 1 to 20 kg Reach: 120 to 1,000 mm IP40 Technical data: Reach X-axis Y-axis Z-axis R-axis 400 mm Maximum payload X-axis Y-axis Z-axis R-axis 5 kg Repeatability XYZ: +/-0.01 mm R: +/-0.004 Axis specifications: Arm length X-axis 250 mm Y-axis 150 mm Z-axis 150 mm R-axis ---- mm Rotation angle X-axis +/-140 º Y-axis +/-144 ° Z-axis -- ° R-axis +/-360 ° Type: R6Y XGL400150 Condition: used / used Scope of delivery: (See picture) Bwslqeh H D Rto R Rfrsl (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: ready for operation (used), Functionality: fully functional, total length: 1,440 mm, total width: 710 mm, total height: 1,300 mm, type of input current: three-phase, SAMCO Unilev150 double-sided edge sander Specification: • condition - used • manufacturer - SAMCO • model - Unilev 150 • working height - 150 mm • sanding belt dimensions 150 x 2150 mm • two sanding belt speeds • tops measuring 22 x 144 cm • both tops adjustable at an angle in the range of 0-30 degrees • engine power - 3.5 / 4.5 HP • pneumatic belt tensioning and oscillation Bwolovmqypjq R Rfrsl • adjustable veneer sanding shoe on one side and "back" 15x75 cm on the other • attachment, angle grinder • extraction nozzle - fi 140 mm • weight - approx. 450 kg • overall dimensions 144 x 71 x 130 cm (length x width x height ) Additional information: • very good, factory technical and visual condition • the photos shown show the actual condition of the item for sale • the possibility of switching on and checking the device on site • the price given in the auction does not include VAT

Condition: new, Made in Italy Machine according to DIN 8606 Center height: 260 mm turning diameter over bed: 520 mm turning diameter over slide: 300 mm center width: 1.500 mm bed width: 400 mm spindle bore: 82 mm spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (option 11 - 2000 rpm) motor power: 5,5 kW (option: 7,5 kW) feed Z-axis: (93) 0,028 - 6,43 mm/rev feed X-axis: (93) 0,012 - 2,73 mm/rev Thread, metric: (54) 0.5 - 224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, modular: (54) 0.5 - 112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P. Cross slide LxW: 650 x 230 mm cross slide stroke: 340 mm top slide LxW: 350 x 150 mm top slide stroke: 150 mm Tailstock spindle diameter: 85 mm tailstock quill stroke: 200 mm Bslq R Rjdvm Eujfrewl Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement pneumatically supported - Acceptance certificate according to DIN 8605, lathe with increased accuracy - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X- and Z-axis - Electrical equipment from high quality brand components e.g. Siemens/Schneider - Lubrication of the guideways via hand pump - Reducing sleeve - 2 fixed center punches - All safety devices according to CE standards: Rotary chuck guard with plexiglass disc, micro limit switch secured. Rotating chuck guard with Plexiglas disc. Rear splash guard along the entire length. Lead screw and pull screw protection by light barrier (integrated in emergency stop circuit). Emergency stop pushbutton. - Swarf container on wheels - Electric coolant device - fixed steady rest - travelling steady rest - operating tool, acceptance protocol according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM Servo Motor, encoder cover has a crack see photo, serial no. according to photo, used, normal traces of use, 100% functional, scope of delivery according to photos Bolq R Roi D Hnqofrewl

Condition: new, Made in Italy. Center height: 300 mm Turning diameter over bed: 600 mm turning diameter over slide: 380 mm center width: 1.500 mm bed width: 400 mm spindle bore: 82 mm spindle nose: Camlock 8" Spindle speeds: (12) 16 - 1200 rpm motor power: 9,2 kW (special equipment / standard: 7,5 kW) feed Z-axis: (93) 0,028 - 6,43 mm/rev feed X-axis: (93) 0,012 - 2,73 mm/rev Thread, metric: (54) 0.5 - 224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, modular: (54) 0.5 - 112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P. Cross slide stroke: 340 mm Top slide stroke: 150 mm Tailstock quill diameter: 85 mm Tailstock quill stroke: 200 mm Tailstock taper: MK 5 Weight: approx. 3,200 kg Equipment: - 3-axis digital display - Automatic lubrication of the guideways - LED illumination - Micrometer bed stop - 9.2 kW motor instead of 7.5 kW - Quick change holder system Multifix with 4 inserts - Tailstock movement pneumatically assisted - Mechanical double clutch - Electromagnetic brake - Rapid traverse for X- and Z-axis - Electrical equipment from high quality brand components e.g. Siemens/Schneider - Lubrication of the guideways via hand pump Bwolq R Rfsd Nk Ncerel - Reducing sleeve - 2 fixed center punches - All safety devices according to CE standards: Rotary chuck guard with plexiglass disc, micro limit switch secured. Rotating chuck guard with Plexiglas disc. Rear splash guard along the entire length. Lead screw and pull screw protection by light barrier (integrated in emergency stop circuit). Emergency stop pushbutton. - Swarf container on wheels - Electric coolant device - fixed steady rest - travelling steady rest - operating tool, acceptance protocol according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to CE standard in the latest version EMO special price incl. 3-axis digital display.

Condition: ready for operation (used), CMC 3515000M5000TAC-F0 PM Servo Motor, serial no. according to photo, used, normal signs of wear, 100% functional, scope of supply according to photos Bwelei D Hnmjq R Rfrel

Condition: used, mileage: 478 km, lifting height: 36,000 mm, Year of construction: 2023, operating hours: 137 h, General information Field of application: Construction Serial number: 783801 (64-BZF-4) Drivetrain Drive: Wheel Weights Empty weight: 29.900 kg Bslqevbpxyj R Rfrjwl Functional Lifting capacity: 27.450 kg Other information Front tyres / undercarriage remaining: 99 Rear tyres remaining : 99 Tyre brand: - Carrier engine: - Upper engine: - Counterweight: 0 Transport dimensions (LxWxH): 3.9x2.55x3.9 Additional information Please contact Pfeifer Rentals & Sales B.V. for more information

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Spindle speed range 20 - 14000 Tool taper ISO40/SK40 DIN69871 Number of axis 3 Movement X-Axis Movement 1150 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 700 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 550 mm Z-Axis Rapid Traverse 42 m/min Table Bwoljwc Evpeq R Rfrsl Outer length 1460 mm Outer width 750 mm Additional Equipment Infrared touch probe Make: Renishaw PP 60 optical (OMP 60) Tool length and diameter measurement Automatic cleaning of tool holders using an air jet Tool cone calibration equipment Safety package for power supply failure Overvoltage limiter Undervoltage monitoring with rapid braking activation Electronic handwheel Chip extractor (chip scraper) This 3-axis DMG MORI DMC 1150 V was manufactured in 2016. A robust vertical machining center featuring a 1150 mm X-axis, 700 mm Y-axis, and 550 mm Z-axis. It boasts a rapid traverse of 42 m/min and a speed range up to 14,000 rpm. Equipped with a Heidenhain TNC 640 control, 30-position SK40 tool magazine, and a chip extractor system. If you are looking to get high-quality milling capabilities consider the DMG MORI DMC 1150 V machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), controller model: Siemens Sinumerik 840C, total width: 2,850 mm, total height: 2,300 mm, swing diameter over cross slide: 1,500 mm, additional equipment features: yes, Uitgerust met Shunk-klauwplaat dia 500 mm VDI-hulpmiddelen Voor het afmaken van moeilijk draaien! CNC high performance draaibanken, waarvan de sterke punten vooral duidelijk zijn bij hard draaien. Een belangrijk kenmerk van alle monfort draaibanken is de hydrostatische ronde geleider, die vrij is van slijtage en een vaste trillingsdemping heeft. Bovendien levert het op de lange termijn de beste oppervlakteresultaten voor draaien, frezen, boren en draadsnijden. Swing over bed: 720 mm Max longitudinal travel Z-axis: 1500 mm Max cross travel X-axis: 320 mm Bslq R Rswda Susfrjwl Spindle cone: A2-11 Dia of spindle bore: 110 mm Power on the spindle: 62 kW Number of speeds: 4000 rpm Length: 5600 mm with scrap conveyor Weight: +-8500 kg Toolchanger: yes Number of tools: 12x

Condition: good (used), Year of construction: 2006, machine/vehicle number: 2006-08, The machine will be repaired, tested, and cleaned by a specialist and will then be fully functional. A test run will be conducted. Bslowd D S Ssq R Rfrswl Sheet width: 6400 mm Steel sheet thickness: 1.5 mm Aluminum sheet thickness: 2.5 mm Stainless steel sheet thickness: 1.0 mm Backgauge: 1000 mm Thrust: 1050 mm Color: blue Total power requirement: 32 A Space requirement: 8500 x 2100 x 1800 mm Machine weight: 5000 kg Upper beam stroke: 200 mm with roller shears Number of uprights: 5 Opening width: 200 mm Bending angle: 145 degrees

Condition: ready for operation (used), Year of construction: 2017, operating hours: 656 h, Control Unit Model SIEMENS 840D Solution Line Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 1150 mm Y-Axis Movement 700 mm Z-Axis Movement 550 mm Tools Slots in storage 30 Media Oil water separator Yes Chip conveyor Yes Internal cooling Yes Additional Equipment Spray gun IKZ (20 bar) Oil mist extractor Machine cabin roof Bjlewc Evieq R Rfrowl Touch Probe Heidenhain TS 649 Electronic handwheel Chip Conveyor This DMG MORI DMC 1150V 3-Axis Vertical Machining Centre was manufactured in the year 2017 in Germany and has 656 spindle hours. It is equipped with a DMG MORI / SIEMENS 840D Solution Line control unit and a 12,000 rpm spindle with SK40. The machine comes with chip conveyor, IKZ (20 bar), oil mist extractor, machine cabin roof, touch probe Heidenhain TS 649 and electronic handwheel. Contact us anytime for further questions! Application Types Milling