Used Surface grind. horiz. from 1000mm grind. length for sale (97)

Proth PSGC 60120 AHR

Call

grinding length: 1,350 mm, grinding width: 600 mm, total height: 600 cm, Condition: good (used), Year of construction: 1997, Manufacturer: PROTH Type: PSGC 60120 AHR Control system: PROTH Year of construction: 1997 Specifications: Metric Metric US Standard X - axis 1350 mm Y - axis 600 mm Z - axis 600 mm Table length 1200 mm Table width 600 mm Feed X - axis 200 mm/min. Feed Z-axis 200 mm/min. Grinding stone dimensions 355 x 50 x 127 mm Power output 7.5 kW Speed 1800 rpm Coolant system Yes Dimensions (estimate) length 4250 mm width 2300 mm height 2600 mm weight Bilnvcj9bs3 6500 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

more

Listing

Karlsbad

7,905 km

MININI PL 8.32 CNC

Call

Condition: used, Year of construction: 2007, grinding length:3150 mm grinding width:800 mm workpiece height:650 mm table surface area:3.150 x 600 mm magnetic clamping plate:3.000 x 600 mm dimensions of grinding wheel:450 x 100 x 127 mm total power requirement:22 kW dimensions of the machine ca.:11 x 3 x 2,4 m surface grinding machine, CNC Flachschleifmaschine, coolant device 2.500l, magnetical adhesive force control, semi automatic balancing system, Ovf9xww

more

Listing

Stockstadt am Main

7,868 km

ELB SWB 15 VA II

Call

Condition: used, Year of construction: 1965, machine/vehicle number: 53920865, grinding length:1500 mm grinding width:450 mm workpiece height:340 mm weight of the machine ca.:4800 kg max. table load:700 kg Used / overhauled surface grinding machine, Make ELB, type SWBE 010 NCK, machine no. 163811079 Machine with automatic notification in all 3 axes. Overhaul scope: Machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. Fgicqcbz All guideways new eingeschabt on Neumaschinengeometrie. Wear parts replaced defective components reparariert or replaced. Reassembly, compl. Functional testing and internal loss. Machine repainted. Machine in perfect, produktionsbereitem state. Accessories: - Vertical feed with pre-selectable active digital display, direct measuring system Heidenhain - Electric magnetic chuck with straight coarse / fine pole pitch, dimensions 1000 x 500 mm - Demagnetisiereinrichtung installed in the control cabinet - Electromotive preselectable automatic dresser with dressing compensation - Splash guards - Complete coolant system with paper band filter - Setting up / leveling -. Technical documentation in German All machines are connected prior to delivery, tested and verified all of the functions. Payment: 50% deposit with order, 50% after acceptance in our factory, before loading Warranty: No Paint: new coat of paint to your specifications On request, the machine can be equipped with an extra charge Diaform / Grinding Wheel. Fig. Similar.

more

Listing

Schijndel

7,555 km

Magerle F-120-R-S1

Call

Condition: excellent (used), Year of construction: 1975, Longitudinal displacement: 1200 mm Transverse displacement: 450 mm Vertical displacement: 625 mm Spindle table distance: 130-755mm Grinding wheel: 400x127x50mm long. Feed rate: 10-300mm/min E3mn7q3 Cross travel: 0.2-7 m/min Auto. Vertical feed: 0.001-0.012 mm/pc. Sanding motor: 12 HP Length: 3500 mm Width: 2000 mm Height: 2850 mm Weight: 5500 kg

more

Listing

Wiener Neudorf

(dealership location)

8,414 km

CHEVALIER FSG-3A818

€33,770

Surface Grinder, horizontal

Call

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 33770 685.53 450 mm 457 x 203 mm 457 mm 200 x 450 mm 500 mm 530 mm 5 - 25 m/min 960 mm/min 0,4 - 6 mm 0.75 kW 0.004 kW 0.19 kW 3,7 kW 2200 mm 1575 mm 1950 mm 1320 kg 203 x 12,7 x 31,75 mm 230 mm 2850 U/min 1,5 kW 240 mm 4 mm 0,02 mm 0,002 - 0,04 mm 2 mm 0,01 mm 330 mm/min 0,2 mm 0,002 mm control panel on swiveling arm aut. vertical feed hardened slide ways in all 3 axes with needle rollers grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond Vnjpxkpgk grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

more

Listing

Niederhelfenschwil

(dealership location)

8,036 km

WALDRICH COBURG 30-10 S

Call

Condition: used, Year of construction: 2012, CONTROLS .. CNC controls SIEMENS 840 D WORKING RANGE SURFACE GRINDING .. grinding width: 2000 mm .. workpiece height (max) with largest wheel: 2000 mm TABLE (SURFACE GRINDING) .. table surface (left-right): 8000 mm .. table surface (front-back): 1800 mm .. workpiece load (max): 18000 kg .. magnetic table: no SPINDLESTOCK GRINDING SPINDLE .. X-axis travel: 8825 mm .. Y-axis travel: 3010 mm AXIS DRIVES .. traverse velocity X (min): 1000 mm/min .. traverse velocity X (max): 45000 mm/min ELECTRICAL SPECIFICATIONS .. mains power supply: 160 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 24360 mm .. space requirements -front/back-: 9550 mm .. total weight approx.: 80200 kg SURFACE SANDING SUPPORT S30 (Y2, column left) - max. sanding motor power: 22kW - max. grinding wheel dimensions: 600x150 - speed: 930 rpm - Travel distance Y2: 3010 mm - Travel to center of table: 2465 mm - Travel W: 1950 mm Cross adjustment - Rapid traverse: 3000 mm/min - Creep speed: 18 and 1 mm/min Vertical adjustment - Adjustment (z2) 150 mm - Rapid traverse 700 mm/min - Creep speed: 18 and 1 mm/min Pulling device - Swivel range: +/- 60 degrees UNIVERSAL SANDING SUPPORT S10 (Y1, column right) - max. sanding motor power: 7.5kW - max. grinding wheel dimensions: 500x60 - Speed: 1100 - 2500 rpm - spindle swivel range: +/- 110 degrees - Travel distance Y1: 3010 mm - Travel to center of table: 1659 mm - Travel W: 1950 mm Cross adjustment - Rapid traverse: 3000 mm/min - Creep speed: 18 and 1 mm/min Vertical adjustment - Adjustment (Z1) 700 mm - Rapid traverse 700 mm/min - Creep speed: 18 and 1 mm/min Pulling device Xsnmdxn - Swivel range: +/- 90 degrees

more

Listing

Pfedelbach

7,944 km

Mägerle MFP 220-50

€125,000

Rettifica tangenziale -Grinding machine

Call

grinding length: 2,200 mm, grinding width: 500 mm, total height: 750 cm, input power: 90 kW (122.37 PS), grinding spindle speed: 8,000 rpm, disc diameter: 500 mm, Condition: good (used), Year of construction: 1993, Functionality: fully functional, Equipment: Rotational speed infinitely variable, MFP 220/50/75, table completely dismantled, ball screw overhauled in X, new hydrostatic nozzles, all components checked by former Mägerle fitter, renewed if necessary (documentation available). Control Siemens 820, ball screw in all axes, all guides hydrostatically guided, very good mechanical condition, just call if you have any questions. Yqva7mivg

more

Listing

Mazzano

8,238 km

ZOCCA

€27,000

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1970, TABLE SIZE 4000 X 1.200 MM ELECTRO MAGNET SIZE 1000 X 500 MM - 4 PIECES FULLY WORKING MACHINE SUITABLE FOR HEAVY DUTY PIECES. WEIGHT AROUND 45 TONS . Bpdqrixv3m MACHINE READY TO LOAD . LOCATION : 25080 MAZZANO - ITALY

more

Listing

Velen

7,625 km

UDSSR 3AB04

Call

Condition: used, Year of construction: 1971, grinding length 1100 mm grinding width 400 mm workpiece height mm table surface area 1150 x 320 mm magnetic plate size 800 x 210 mm grinding wheel speed U/min. max. dia. of grinding wheel 400 mm max. width of grinding wheel mm Binypqcvggk total power requirement kW weight of the machine ca. 5,8 t dimensions of the machine ca. 2,1 x 1,9 x 2,1 m

more

Listing

Tryskovická 343/6, 196 00 Praha 9, Tschechien

8,166 km

WMW SFBE 800/4000 INV 27370

Call

Condition: good (used), Year of construction: 1964, The machine is in good technical condition, by prior arrangement the possibility of testing. Dm8dv7

more

Listing

Lüneburg

7,737 km

ELB-SCHLIFF SWB15VR II-U

€13,500

CNC Horizontal Surface Grinding Machine

Call

grinding length: 1,500 mm, grinding width: 450 mm, grinding height: 350 mm, grinding wheel diameter: 300 mm, control cabinet length: 650 mm, control cabinet width: 1,500 mm, control cabinet height: 2,000 mm, space requirement height: 3,000 mm, space requirement length: 7,000 mm, space requirement width: 2,500 mm, Condition: used, Year of construction: 1970, machine/vehicle number: 90400470, Functionality: fully functional, Equipment: Documentation/manual, - fully functional as a surface grinding machine, disk grinding device available, function unclear as we have never used it - incl. two-axis digital display - with textile belt filter - machine still in production - all dimensions are approximate - Machine can be inspected under power by arrangement - Delivery date by arrangement As these are used machines / used accessories, we exclude any warranty and guarantee. The information is provided to the best of our knowledge, we assume no liability. We reserve the right to deviations from technical data and errors in the description. The buyer has the right to check the condition and function of the goods before concluding the contract. We exclude a warranty for obvious and hidden defects, as well as compensation for damages of any kind, including damages that have not occurred to the delivery item itself. Sales are only made to traders. This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. Bilkxghtetm

more

Listing

Monheim am Rhein

7,669 km

ROSA LINEA STEEL 13.7

Call

Condition: excellent (used), Year of construction: 2000, CNC surface grinding machine in very good condition Jn93ozwcbh The machine can be demonstrated under power grinding length 1500 mm grinding width 750 mm workpiece height 600 mm Table dimensions 1400 x 500 mm table load 1700 kg dimensions of grinding wheel 400 x 30 x 100 mm grinding wheel speed 1450 rpm. main drive 11 kW table speeds 1 - 40 m/min cross feeds: 0 - 4 m/min weight of the machine approx. 9,4 t dimensions of the machine approx. 6,4 x 3,1 x 2,65 m Equipment: - CNC control E.C.S. CNC 2401 System III - Magnetic plate 1400 x 500 mm - Coolant device with paper band filter Accesories: Machine shoes / fixators Machine documentation Various new spare parts, including coolant pump, grinding wheel with flange, guideway covers, electronics assembly, etc.

more

Listing

Stockstadt am Main

7,868 km

ELB SWBE 010 NCK

Call

Condition: used, machine/vehicle number: 163811079, grinding length:1000 mm grinding width:550 mm workpiece height:400 mm surface area:1300x450 mm Gzs0sg cross feed motor:0,55 kW grinding wheel speeds:1400 U/min total power requirement:18 kW weight of the machine ca.:4800 kg Used / overhauled surface grinding machine, Make ELB, type SWBE 010 NCK, machine no. 163811079 Machine with automatic notification in all 3 axes. Overhaul scope: Machine completely dismantled, cleaned all the components thoroughly and checked for complete functionality. All guideways new eingeschabt on Neumaschinengeometrie. Wear parts replaced defective components reparariert or replaced. Reassembly, compl. Functional testing and internal loss. Machine repainted. Machine in perfect, produktionsbereitem state. Accessories: - Vertical feed with pre-selectable active digital display, direct measuring system Heidenhain - Electric magnetic chuck with straight coarse / fine pole pitch, dimensions 1000 x 500 mm - Demagnetisiereinrichtung installed in the control cabinet - Electromotive preselectable automatic dresser with dressing compensation - Splash guards - Complete coolant system with paper band filter - Setting up / leveling -. Technical documentation in German All machines are connected prior to delivery, tested and verified all of the functions. Payment: 50% deposit with order, 50% after acceptance in our factory, before loading Warranty: No Paint: new coat of paint to your specifications On request, the machine can be equipped with an extra charge Diaform / Grinding Wheel. Fig. Similar.

more

Listing

Menden (Sauerland)

7,697 km

ABA FFU 1500/90 CNC

€9,000

Call

grinding length: 1,600 mm, grinding width: 850 mm, total height: 300 cm, total length: 700 cm, total width: 350 cm, input power: 24 kW (32.63 PS), Condition: repair required (used), Year of construction: 1988, Operating hours: 74,235 h, The machine has been standing since 2020 and cannot be switched on due to control errors. Control system conversion necessary. Individual components such as servomotors, hydraulic unit, magnetic tables, etc. in good condition. Eg9aweish

more

Listing

Wiener Neudorf

(dealership location)

8,414 km

CHEVALIER FRG-600

€120,910

Call

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 120910 2406.11 600 mm 600 mm Isjiltmkf 600 mm 325 mm 600 mm 205 kg 450 mm 500 - 2200 1/min 5,5 kW 19 kW 2800 mm 2800 mm 2610 mm 3500 kg 820 mm Dm. 355 x 38 x Dm. 127 mm 0,001 mm 1.7 kW 2.4 kW 10 - 150 1/min 0.005 mm 0.003 mm iSurface control with 10,4" touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard linear scale Fagor (0,001 mm) for downfeed axis electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English ALTERNATIVE: model version FRG-600S with Smart iControl for profile grinding moreprice 3.600,00

more

Listing

Beckingen

7,764 km

FAVRETTO MC100

Call

grinding length: 1,200 mm, grinding width: 600 mm, Condition: good (used), Year of construction: 1995, CNC surface grinding machine Manufacturer Favretto year of construction 1995 max. sanding length 1200mm max. sanding width 600mm with belt filter system Machine is in a used 100% functional condition. Cb9dm28 Can be inspected and tested by prior arrangement.

more

Listing

Toruń

8,182 km

surface grinder

FAVRETTO MD 200

€43,000

Call

Condition: good (used), Year of construction: 2007, machine/vehicle number: SN 04893, Functionality: fully functional, Surface grinder NC (722), brand Favretto, type MD 200, year of manufacture 2007, SN 04893, connection power 400 V/40 kW, machine weight 14 200 kg, travel X/Y/Z 2200 x 850 x 750 mm, clamping plate 2200 x 600 mm, table load max. 2,6 t, magnetic clamping table, 2000 x 700 mm, cooling device, oil mist extraction and filtration system, prod. Cobaron, control, prod. DGT D7s8xl8

more

Listing

Tatabánya

8,570 km

surface grinding machine

6121-Rotary Table Surface Grinder

€15,000

Flat profile grinding machine

Call

Condition: good (used), Year of construction: 1993, Rotary table surface grinder, surface grinder, Sumitomo SVR125, used machine Cqlwddmqxk Overall dimensions: 4200 x 2300 x 2800 mm Year: 1993 Weight: 6300 kg Control: Fanuc With emulsion management Power: 44 kW Magnetic table diameter: 1250 mm Magnetic table capacity: 1400 kg Magnetic table rotation speed: 5-25 rpm Grinding wheel diameter: 660 mm Grinding wheel speed: 720 rpm Feed speed: 1-300 mm/min

more

Buy-it-Now

ELB-SCHLIFF smartLine N10 KOMBI KGT V 840D

€76,700

Fixed price plus VAT

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 52994, TECHNICAL DETAILS 22yeqs9h X-axis sanding length: 1,000 mm Z-axis sanding width: 400 mm Y-axis sanding height: with smartLine Basic (sanding disc D = 300 mm) 500 mm on the worktable with smartLine Kombi (sanding disc D = 400 mm) Worktable: 500/700/950 mm Magnetic plate: 420/620/870 mm Table load: 750 kg on the worktable/525 kg on the magnetic plate Drive element: Ball screw Drive motor: AC servo motor, adjustable Measuring system: absolute, rotary encoder Resolution: 0.001 mm Travel distance: 1,190 mm Feed rate: 0.01 - 30 m / min Grinding path adjustment: via setting buttons on the control panel (xpressCube / -Pro) or direct value input (840D) Machine control: Siemens 840D sl MACHINE DETAILS Width: 4,100 mm Depth: 2,250 mm Height: 2,350 mm (2,650 / 3,050 mm with Smart N combi) Weight of the machine: approx. 5,400 kg Total power: 63 kW Fixed pick-up date of the machine on 12.12.23 or 27.12.23. Bidder is obliged to pick-up the machine on time.

more

Listing

Toruń

8,182 km

surface grinder

Reform LFU 120/60

Call

Condition: good (used), Year of construction: 1997, working condition, table 1200 x 600 mm Ly7um8wts2

more

Listing

Wiener Neudorf

(dealership location)

8,414 km

CHEVALIER FSG-1640ADIV

€70,300

CNC surface grinding machine

Call

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 70300 1413.03 620 mm 1.000 x 400 mm 1015 mm 400 x 1.000 mm 1050 mm 1100 mm 5 - 25 m/min 0 - 2,250 mm/min 3 - 32 mm 420 mm 0.001 3.7 kW 1.5 kW 1 kW 1 kW 6,3 kW 4280 mm 1730 mm 2080 mm 3500 kg 355 x 50 x 127 mm 1.450 U/min 0,001 - 0,04 mm 675 mm/min 0,001 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment with diamond, with compensation device grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations Bwwsscno2d user manual in GERMAN and ENGLISH

more

Listing

Bacău

9,112 km

ABA EcoLine 1200

Call

grinding length: 1,200 mm, grinding width: 500 mm, grinding height: 400 mm, grinding wheel diameter: 100 mm, Condition: good (used), CNC Surface Grinding machine ABA Grinding Length - 1200mm Grinding Width (distance between columns) - 500mm Grinding height - 400mm Cmfye0eszg The machine is available right away. It can be inspected in Bacau, Romania

more

Listing

Kirchheim bei München

8,144 km

horizontal flat grinding machine

Minini PL8.32 CNC

Call

Condition: good (used), Year of construction: 2007, Kuehlmittelanlage 2.500l, Haftkraftregelung, Yrfwbw halbautom. Wuchtsystem Schleiflaenge 3150 mm Schleifbreite 800 mm Werkstueckhoehe 650 mm Tischflaeche 3.150 x 600 mm Magnetspannplatte 3.000 x 600 mm Spindeldrehanzahl 1/min Schleifscheibenabmessung 450 x 100 x 127 mm Spindelleistung kW Gesamtleistungsbedarf 22 kW Maschinengewicht ca. t Raumbedarf ca. 11 x 3 x 2,4 m

more

Listing

Taiwan

12,255 km

Conventional Surface Grinder

KRAFT FS-D-NC

Call

Condition: new, :FS-D-NC 120200 | FS-D-NC 120300 | FS-D-NC 120400 | FS-D-NC 120500 grinding length:2000 | 3000 | 4000 | 5000 mm 3awhj0mv2 grinding width:1200/1600 mm distance spindle nose and table:1000 (Option 1200) | 1000 (Option 1200) | 900 (Option 1100) | 900 (Option 1100) mm max. table load:5200 | 6340 | 7600 | 8700 kg table-size:1200 (1600) x 2000 | 1200 (1600) x 3000 | 1200 (1600) x 4000 | 1200 (1600) x 5000 mm table speeds:1~25 m/min table guideways:V-Führung automatic cross feed adjustable:0.1 - 40 mm/Hub rapid traverse cross:900 mm/min cross feed on handwheel:(x1) 0.1/(x5) 0.5/(x10) 1 pro Umdrehung mm cross feed on handwheel:(x1) 0.001/(x5) 0.005/(x10) 0.01 pro Grad mm rapid traverse vertical:300 mm/min autom. vertical feed:0.001 ? 0.1 mm vertical feed on handwheel:(x1) 0.1/(x5) 0.5/(x10) 1 pro Umdrehung mm vertical feed on handwheel:(x1) 0.001/(x5) 0.005/(x10) 0.01 pro Grad mm spindle speed:1100 1/min dimensions of grinding wheel:508 x 50 x 203 mm spindle drive:15 (Option 22) kW drive motor for hydraulic pump:11 | 11 | 15 | 15 kW weight of the machine ca.:20000 | 24000 | 28500 | 33000 kg Machine size:6600/3700 | 8800/3700 | 11000/3700 | 13200/3700 mm Machine height:4000 mm grinding wheel:508 x 50 x 203 mm :mit Diamant

more

Listing

Azpeitia

7,549 km

surface grinding machine

Danobat RT-3200

Call

grinding length: 3,200 mm, grinding width: 900 mm, Condition: like new (used), MAX. GRINDING 3200 X 900 MM Hvxa9lpp8

more

Listing

Wasbek

7,654 km

KNUTH Werkzeugmaschinen HFS 80300 F NC

Call

Condition: new, Moving column design with automated control of X and Z axes and Siemens HMI. Jjkee2 Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.

more

Listing

Wiener Neudorf

(dealership location)

8,414 km

CHEVALIER FSG-2040ADIV

€96,500

Precision surface grinding machine

Call

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 96500 1939.65 730 mm 1.000 x 500 mm 1000 mm 1.000 x 500 mm 1100 mm 5 - 25 m/min 2.2 kW 18 kVA kW 3850 mm 3000 mm 2800 mm 6200 kg 990 mm 1.170 kg 355 x 50 x 127 mm 560 mm 0 - 2.250 mm/min 0,001 - 32 mm Bwwss9a9xg 560 mm 0 - 396 mm/min 0,001 - 0,04 mm 0,001 mm 500 - 1.800 U/min 7,5 kW 2,4 / 1,1 kW 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed vertical feed by servo drive, ballscrew spindle and hardened and grounded slide ways transversal feed by AC motor and ball screw spindle Turcite-B slide ways for table longitudinal move, 1 V and 1 flat slide way grinding wheel spindle on 4 high precision angular contact bearings electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH OPTION: automatic hyd. extractor with feed compensation 2.130,-

more

Listing

Brügg

7,941 km

Brand 1000N

Call

Condition: used, Year of construction: 2001, Operating hours: 5,950 h, machine/vehicle number: 843-01, Used precision, surface and profile grinding machine BRAND Technical data according to separate PDF Bhsrackaoa2

more

Listing

ELB (überholt in 1991) SW 10 SA (Magnet 1000 x 200 mm)

Mörsdorf

7,965 km

Flat profile grinding machine

ELB (überholt in 1991) SW 10 SA (Magnet 1000 x 200 mm)

Call

grinding length: 1,000 mm, grinding width: 200 mm, grinding wheel diameter: 300 mm, Condition: good (used), Year of construction: 1978, Surface grinding machine make ELB type SW 10 SA machine # 34551262 year of construction 1978 overhauled in 02/1991 technical data: Table size travel X axis 1000 mm Travel Y axis 350 mm travel Z axis 300 mm grinding wheel size 300 mm Drive power 4,65 kW outer dimensions L x W x H 3000 x 2000 x 2500 mm Weight of the machine follows with - magnetic plate 1000 x 200 mm - automatic infeed - digital display for Y - control panel - coolant system 7jxwvnppnk used, in good condition

more

Auction

ELB-SCHLIFF smartLine N10 KOMBI KGT V 840D

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 52994, Functionality: fully functional, TECHNICAL DETAILS X-axis sanding length: 1,000 mm Z-axis sanding width: 400 mm Y-axis sanding height: with smartLine Basic (sanding disc D = 300 mm) 500 mm on the worktable with smartLine Kombi (sanding disc D = 400 mm) Worktable: 500/700/950 mm Magnetic plate: 420/620/870 mm Table load: 750 kg on the worktable/525 kg on the magnetic plate Drive element: Ball screw Drive motor: AC servo motor, adjustable Measuring system: absolute, rotary encoder Resolution: 0.001 mm Travel distance: 1,190 mm Feed rate: 0.01 - 30 m / min Grinding path adjustment: via setting buttons on the control panel (xpressCube / -Pro) or direct value input (840D) Machine control: Siemens 840D sl MACHINE DETAILS Width: 4,100 mm Depth: 2,250 mm Height: 2,350 mm (2,650 / 3,050 mm with Smart N combi) Weight of the machine: approx. 5,400 kg Total power: 63 kW Befqchu Fixed pick-up date of the machine on 12.12.23 or 27.12.23. Bidder is obliged to pick-up the machine on time.

more

Listing

Neu-Ulm

8,027 km

Rack and pinion grinding machine thread

Mägerle MFP L 260

Call

Condition: excellent (used), Year of construction: 2009, Mägerle rack grinder grinding machine MFP-L Siemens CNC Manufacturer [manufacturer]: Mägerle Clmzclvijc Type [type]: MFP-L-260-75 Control unit [control unit]: Siemens 840D Sinumerik Incl. handwheel construction year]: 10/2008 travel path [travel path]: Clamping area table X= 2202mm clamping area table Z=352mm longitudinal stroke 2600mm cross stroke of the grinding support : 650mm distance between table and grinding spindle axis [distance between table and grinding spindle axis] 806mm B3lp8ivkvb Grinding wheel dimension [grinding wheel dimensions]: Diameter 400mm Width 160mm Bore 127mm peripheral speed grinding wheel: 35(50) m/s Lifting speed [lifting speed]: Longitudinal 30m/min Transverse 5m/min Vertical 5m/min smallest infeed 0,001mm Drive power [drive power]: grinding wheel (AC) 75kW total connection power [total connection power]: Machine 113kVA Knoll coolant filtering equipment dimensions approx: (L x D x H): 5,6m x 2,4m x 3m [weight]: 2.000kg machine weight: 21.000kg needed space ]ca. (L x D x H): 7,06m x 2,7m x 3,26m Full documentation is available. Viewing under power can take place at short notice. For further questions we are at your disposal. Price, ex stock here plus VAT. Condition: good - ready for demonstration Delivery: ex stock - as viewed Payment: net - after receipt of invoice Subject to prior sale, errors excepted. We ask for your order. Other machines and equipment available from stock - please ask. We are pleased.

more

Listing

Düsseldorf

7,661 km

Rosa LL 16

Call

Condition: good (used), Year of construction: 2006, branded surface grinding machine, make Rosa, type LL 16 grinding area 1600 x 650 mm Fsqwonk3u dimensions 4000 x 2000 mm

more

Listing

Wiener Neudorf

(dealership location)

8,414 km

CHEVALIER FSG-1640AF

€77,130

Call

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 77130 1550.31 600 mm 1000 x 400 mm 1015 mm 1000 x 400 mm 670 kg 1100 mm 5 - 25 m/min 0 - 2.250 mm/min 350 mm 0.001 - 32 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2.000 1/min 5,5 kW 2.7 kW 1.1 kW 1.1 kW 3630 mm 2682 mm 2200 mm 4800 kg 355 x 50 x 127 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment with diamond, with compensation device _FULLY ENCLOSED SPLASH GUARD PROTECTION OF WORKING AREA_ grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH 7juhx823qd

more

Listing

Chemnitz

8,031 km

surface grinding machine

Metavo

Call

Condition: good (used), Year of construction: 1974, machine/vehicle number: 0370, External cylindrical grinding machine Made Metavo working area 315x1000mm convential no CNC machine is in a working condition weight 4600 kg Wbmwb0mw

more

Listing

Roman

9,079 km

Surface grinding machine

Poleks YT1200

€29,000

CFR Fixed price plus VAT

Call

grinding length: 1,200 mm, grinding width: 300 mm, total height: 2,020 cm, feed length Y-axis: 1,200 mm, feed length Z-axis: 300 mm, Condition: new, Year of construction: 2022, Operating hours: 0 h, New plane grinding machine. Never used it. It can be seen in Roman, Str Tirului nr 4, Jud. Neamt. Price does not include VAT. Wuttrqt

more

Listing

Pressbaum

(dealership location)

8,395 km

Povazska Strojane BRH 40 B

€8,000

Call

Condition: repair required (used), Year of construction: 1991, Two pieces available D38uacnss7

more

Listing

Chemnitz

8,027 km

Surface grinder FAVRETTO MC 130

ABA FUV

€135,800

EXW Fixed price plus VAT

Call

grinding length: 1,250 mm, grinding width: 600 mm, total height: 270 cm, total length: 465 cm, total width: 230 cm, feed length X-axis: 1,250 mm, feed length Y-axis: 675 mm, feed length Z-axis: 700 mm, workpiece weight (max.): 700 kg, motor power: 7,500 W, grinding height: 600 mm, feed rate X-axis: 25,000 mm/min, grinding wheel diameter: 400 mm, rotational speed (max.): 3,820 rpm, CNC controller: SCHNEIDER, flange width: 80 mm, Condition: refurbished (used), machine/vehicle number: 151584, RetroFit of the ABA FUV 1250/600 CNC surface grinding machine with SCHNEIDER control system - Machine is completely disassembled and RetroFit made - All 3 linear axes CNC controlled Standard accessories: - Electro-magnetic plate - Grinding wheel flange 40 - 80 mm - Dressing diamond holder without diamond - Full enclosure with sliding door - Coolant nozzle - Machine light - Central lubrication - Operating tool - Operating instructions - CE certificate - Measurement report Special accessories (with surcharge) - Coolant system with magnetic separator and sedimentation tank - Grinding wheel flange 20 - 50 mm - Balancing stand with mandrel - Mist extraction filter Mist Bgzy7gjr3h2 - Suction hood - Constant cutting speed

more

Listing

La Grand-Croix

7,871 km

FAVRETTO MC 130

Call

Condition: excellent (used), Year of construction: 1992, Grinding length without magnetic chuck : 1500 mm Grinding width : 750 mm Longitudinal movement X axis : 1520 mm Cross movement Y axis : 650 mm Vertical movement Z axis : 690 mm Ø grinding wheel 406 x 100 mm Dt7ddysws Spindle speed : 1400 tr/min Weight : 8600 mm Accessories : magnetic chuck Braillon 1000 x 500 mm Electronic controller Elcon 3

more

Listing

Wiener Neudorf

(dealership location)

8,414 km

CHEVALIER FSG-1224ADIV

€55,910

Call

Condition: new, Year of construction: 2023, neu 2023 5541 Jänner 2024, Zwischenverk Taiwan 55910 Bwwspms3g0 1123.79 1 610 mm 600 x 300 mm 610 mm 300 x 600 mm 650 mm 700 mm 5 - 25 m/min 0 - 2,250 mm/min 3 - 32 mm 320 mm 0.001 5,5 kW kW 0.74 kW 1 kW 1 kW 2950 mm 1490 mm 2080 mm 2200 kg 355 x 50 x 127 mm 1.450 U/min 0,001 - 0,04 mm 675 mm/min 0,001 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator automatic dresser with compensation grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH OPTIONAL EQUIPMENT: additional grinding wheel flange 200,--

more

Listing

Taiwan

12,255 km

KRAFT FS-C 80 | FS-C 100

Call

Condition: new, :FS-C 80150/100150AHD | FS-C 80200/100200AHD | FS-C 800300/100300AHD | FS-C 800400/100400AHD Mu2iak grinding length:1500 | 2000 | 3000 | 4000 mm grinding width:800/1000 mm distance spindle nose and table:800 [Option: 1000] | 800 [Option: 1000] | 800 [Option: 1000] | 700 [Option: 900] mm max. table load:800x1500 (2000kg)/1000x1500 (2400kg) | 800x2000 (2650kg)/1000x2000 (3200kg) | 800x3000 (3950kg)/1000x3000 (4800kg) | 800x4000 (5000kg)/1000x4000 (5500kg) kg table-size:800/1000x1500|800/1000x2000 | 800/1000x3000 | 800/1000x4000 mm table speeds:3?25 m/min table guideways:V- und Flachführung automatic cross feed adjustable:0.5?20 mm/Hub rapid traverse cross:900 mm/min cross feed on handwheel:5 (Umdrehung) / 0.02 (Grad) mm rapid traverse vertical:240 mm/min autom. vertical feed:0.001 ~ 0,1 mm spindle speed:1450 1/min dimensions of grinding wheel:406 x 50.8 x 127 mm spindle drive:7,5 (11 Opt.) kW drive motor for hydraulic pump:5,5 | 7,5 | 7,5 | 11 kW weight of the machine ca.:12800/13800 | 14300/15300 | 17300/18300 | 20300/21300 kg Machine size:516x 240/266x256 | 626x 240/260x256 | 516 x 240/266 x 256 | 1066 x 240/266 x 256 cm grinding wheel:405x50x127 mm :mit Diamant

more

Listing

Beringen

7,984 km

Surface grinding machine

ABA FFU1000/50

Call

Condition: good (used), Grinding range 1000x500x630mm Table size 1000x400mm Wheel diameter 400mm Magnetic plate 1000x500mm Cdx8kh9k MARCELS MASCHINEN CH

more

Listing

Heilbronn

7,927 km

ABA Ecoline 2006 ES

Call

Condition: good (used), Year of construction: 2002, Abamatic control electro magnet plate pneumatic flap dresser exhaustion device coolant device with paper filtering Technische Daten / technical details: gr. Schleiflänge / max. grinding length 2000 mm gr. Schleifbreite / max. grinding width 700 mm Magnetspannplatte / magnet clamping plate 2000x600 mm Schleifscheibendrehzahl / grinding wheel speed 1000-2600 UpM / rpm Schleifscheibendurchmesser / grinding wheel dia. 400 mm Antriebsleistung Spindel / drive capacity spindle 11 kW Antriebsleistung komplett ca. / drive capacity 25 kW Gewicht der Maschine / weight 9500 kg Chyw8xm930 Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

more

Listing

Łysomice

8,177 km

Surface grinding

ABA FFU 2000/70

Call

Condition: good (used), Year of construction: 1990, machine in 2020 has change as new CNC opartion system, with chuck 1200 mm. Dmcid7

more

Listing

Colombara

8,253 km

Surface grinding machine

Ziersch & Baltrusch STARLINE 800 CNC

€8,000

Call

Condition: not inspected (used), Year of construction: 1994, Ziersch & Baltrusch (Z&B) STARLINE 800 CNC Including Siemens Sinumerik 805 Including Hummel cooler Accessories: including 9 grinding wheel flanges Magnetic disk working area: 600x300mm Stroke: 1000+ Complete documentation. SINGLE SIZE Csmwmndsbo Machinery: 3200x2400x2500mm Control cabin: 1400x00x2200mm Hydraulics: 800x500x700mm Indicative weight: 5.000 Kg TECHNICAL DATA Connection Requirements: 400v, 50Hz, 30kVA, 50A Control voltage: 24VDC "Including LOSMA MASTER-MINI L high swing purifier" Year: 2016 Dimensions: 890x1250 Weight: 260Kg Fabric width: 760mm Rough grinding (emulsion) - Flow rate l/min: 200 Finish grinding (oil) - Flow rate l/min: 100 Extruder (emulsion) - Flow rate l/min: from 200 to 300 Washing machines, chip removal machines (emulsion) - Flow rate l/min: 300 Like new... Characterized by a decidedly limited size, it is suitable for many industrial processes such as: drawing, grinding, rolling, washing, sanding, etc.

more

Listing

Wiener Neudorf

(dealership location)

8,414 km

SCHLEIFPOWER SCHLEIFPOWER FSM 2550 AHD

€14,400

Call

Condition: used, Year of construction: 2015, gebraucht 2015 5413 prompt, Zwischenverkauf v China B9bnmwipov 14400 11520 1 450 mm 600 x 254 mm 600 mm 508 x 254 mm 180 kg 2850 1/min 2.2 kW 2200 mm 1800 mm 1850 mm 1800 kg 200 x 20 x 312 mm 600 mm 2-axes digital read-out grinding wheel with flange wheel balance arbour electro-magnetic chuck hydraulic longitudinal feed automatic cross feed automatic vertical feed automatic demagnetiser man. parallel wheel dressing device coolant device separate hydraulic unit aut. central lubrication dressing diamond operator tools machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

more

Listing

Taiwan

12,255 km

CNC Surface grinding machine

KRAFT FS-NC-50AHR | FS-NC-60AHR | FS-NC-70AHR

Call

Condition: new, :FS-NC-50AHR | FS-NC-60AHR | FS-NC-70AHR Njizt grinding length:1020/1520/2020 mm grinding width:500 | 600 | 700 mm Distance spindle center to table:600 (Option 800, 1000) mm table surface area:500x1000/500x1500/500x2000 | 600x1000/600x1500/600x2000 | 700x1000/700x1500/700x2000 mm table load capacity:800/1000/1000 | 1200/1400/1400 | 1500/1700/1700 kg table speed -stepless-:5-25 m/min Auto. cross feed increment:0,5~20 mm/min rapid traverse cross:900 mm/min autom. vertical feed:0,001~0,999 (Option) mm grinding wheel speeds:1450 U/min dimensions of grinding wheel:405x50x127 mm spindle drive:7,5 (Opt. 11) kW weight of the machine ca.:6000/7200/8400 | 6300/7500/8700 | 6600 /7800 /9000 kg machine width/height:4600x2300 | 4600x2450 | 4600x2550 mm machine length:4600/4800/6000 mm

more

Listing

Schweiz

8,020 km

FAVRETTO MD 120

Call

Condition: excellent (used), Grinding range1200 x 800 mm Wheel diameter 457 mm Magnetic plate 1200 x 800 mm Beej8ni Misc.Accessories MARCELS MASCHINEN CH

more

Listing

Wiener Neudorf

(dealership location)

8,414 km

CHEVALIER FSG-1632ADIV

€57,670

Call

Condition: new, neu ca. 6 Monate ab Auftragse Pixs7 Taiwan 57670 1159.17 610 mm 800 x 400 mm 800 mm 800 x 400 mm 810 mm 5 - 25 m/min 0.74 kW 10 kVA kW 3540 mm 2080 mm 2100 mm 2900 kg 980 mm 350 kg 355 x 50 x 127 mm 450 mm 0 - 2.250 mm/min 0,001 - 32 mm 480 mm 0 - 675 mm/min 0,001 - 0,04 mm 0,001 mm 500 - 1.800 U/min 3,75 kW 1,1 kW 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator man. extractor with diamond grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

more

Listing

Wiener Neudorf

(dealership location)

8,414 km

CHEVALIER FSG-1224AF

€66,760

Call

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 66760 1341.88 600 mm 600 x 300 mm Yxei9k 610 mm 600 x 300 mm 420 kg 700 mm 5 - 25 m/min 0 - 2.250 mm/min 350 mm 0.001 - 32 440 mm 0 - 675 mm/min 0.001 - 0.04 mm 500 - 2000 1/min 5,5 kW 0.75 kW 1.1 kW 1.1 kW 2710 mm 2428 mm 2200 mm 3500 kg 975 mm 355 x 50 x 127 mm 10,4" grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator autom. dressing attachment with diamond, with compensation device _FULLY ENCLOSED SPLASH GUARD PROTECTION OF WORKING AREA_ grinding wheel grinding wheel flange grinding wheel balancing scale balance arbor LED machine lamp machine and equipment according to the CE-regulations user manual in GERMAN and ENGLISH

more

Listing

Wiener Neudorf

(dealership location)

8,414 km

CHEVALIER FRG-400

€109,510