Used Liebherr L534 Z for sale (258)

Condition: excellent (used), functionality: fully functional, power: 120 kW (163.15 HP), operation weight: 24,700 kg, chain condition: 85 %, digging bucket width: 1,200 mm, Year of construction: 2017, operating hours: 12,261 h, Equipment: cabin, LIEBHERR R924 LC, with additional hydraulics, air conditioning, year 2017 • Manufacturer: LIEBHERR • Type: R924 LC • Year of manufacture: 2017 • Operating hours: 12,261 hours • Weight: 24,700 kg • Power: 120 kW / 163 hp • Bucket: 1.20 meters wide, with teeth • Mono boom • Central lubrication system • Additional hydraulics for hammer and grapple • Additional work lights • Cab protection • All-round view cameras • Chains in 85% condition • Air conditioning • Heated seat • Full service history at Liebherr • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typographical errors not excluded. - Sale subject to our general terms and conditions. Nedpfx Afozd Tdherjcw

Condition: excellent (used), functionality: fully functional, overall weight: 38,500 kg, Year of construction: 2017, operating hours: 13,345 h, Equipment: quick-change device, Liebherr R946 NLC with auxiliary hydraulics, air conditioning, and Oilquick OQ80 quick coupler • Manufacturer: Liebherr • Model: R946 NLC • Year of manufacture: 2017 • Operating hours: 13,345 h • Weight: 38,500 kg • Bucket: 1.50 meters wide, with teeth and cutting edge • Power: 220 kW / 300 hp • Engine: Liebherr D936A7, 6-cylinder • Emission standard: Stage IV / Tier 4f • High and low speed gears • Quick coupler: Oilquick OQ80 • Mono boom • Central lubrication system • Demolition guard for the cab • 360° camera view with Skyview • Track condition: 85% Njdpfx Afjw Rccuerscw • Air conditioning • Heated seat • Full service history at Liebherr • German machine • Ready for immediate use • This offer is non-binding and subject to change. - Subject to prior sale, - Errors and/or typos are not excluded. - Sale subject to our general terms and conditions.

Condition: used, Year of construction: 2014, operating hours: 5,500 h, Liebherr R924 LC Compact Litronic/Hydraulic Excavator Operating hours: 5500 h Weight: 26300 kg Engine manufacturer: Liebherr, short-tail swing Engine power: 120 kW Air conditioning Engine type: D934S Top machine? * Sales consultant information * + * An appointment is required for a test drive or inspection. * + Nsdjzlw Ugepfx Afrocw * Trade-in and financing options are available. * Errors in the information cannot be ruled out. * Please verify the equipment on the vehicle. Subject to errors, typos, and prior sale.

Condition: used, Load hook for two-way excavators. Nsdszkz Ubspfx Afrscw

Condition: used, Shells, 400mm Ncedezkza Djpfx Afrsw

Condition: used, mileage: 140,111 km, power: 210 kW (285.52 HP), first registration: 11/2017, fuel type: diesel, overall weight: 24,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2028, color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, all wheel drive, Internal vehicle number: G400136 Available immediately at our yard in Kaufungen More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Crane chassis * Operating kilometers: 140,111 km * Operating hours: 4,349 * Date: 28.04.2026 * Drive and steering / steered axles: 4 x 4 / axles 1, 2 * Tire size: 445 / 95 R25 * Engine emission level: Stage IV * Engine (manufacturer/type) / power: Liebherr / 210 kW / 2 rpm * Transmission manufacturer / type: ZF / SG / AS-Tronic * Operable from the crane: yes * Crane upper carriage * Operating hours: 7,754 * Date: 28.04.2026 * Hook blocks / load hook: 25 t / 5.7 t * Counterweight: 0.75 + 0.75 + 1.8 * Equipment & safety * Cab chassis: yes * Wind speed indicator: yes * Working area limitation: yes * Safe load indicator: yes * Emergency stop button: in both carrier and crane cabin * Emergency operation of crane hydraulics: yes * Warning light: switchable between LED continuous light and LED flashing light ---- Comfort & extras * 12V socket: in both cabins * Air conditioning: yes * Auxiliary heater: yes * Work lights: 2 pieces, electrically adjustable on the rotating platform * Box for outrigger pads: yes ---- Financing example: * Internal number: Crane * Purchase price: 229,900.00 € * Down payment: 10% * Term: 60 * Monthly rate: 3,500.02 € Residual value: 45,000.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors and omissions excepted. We will gladly accept your used vehicle in part exchange. Financing is possible directly with us. GOLEC NUTZFAHRZEUGE GMBH Ncjdey Hy Dpepfx Afrew We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, power: 1 kW (1.36 HP), Year of construction: 2026, operating hours: 1 h, Empty weight: 1.934 kg Njdpfxezcx Uwo Afrocw Please contact Emal Jaweed for more information

Condition: used, Year of construction: 2015, operating hours: 15,583 h, Equipment: ABS, LIEBHERR LH 22 M LITRONIC Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2015 ? BETRIEBSSTD. 15 583 Std TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ncjdoycbb Hopfx Afrsw

Condition: used, Year of construction: 2008, Equipment: ABS, LIEBHERR PELLE A316 Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? BETRIEBSSTD. 18 887 Std Nedpfxsum Ihyo Afrecw TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: used, Year of construction: 2016, operating hours: 5,574 h, Liebherr L556 wheel loader, year of manufacture: 2016, operating hours: 5,574 h, bucket, onboard weighing system with printer, central lubrication system, rear view camera, engine: Liebherr [165 kW / 225 hp], weight: 18,400 kg, immediately operational. We are happy to offer you a leasing or financing solution upon request. Mr. Mihm (phone) will be pleased to assist you. For more information, please visit our website. Subject to errors and prior sale! = Further Information = Please contact Tobias Ebert for more details. Ncjdpsytmlxjfx Afrsw

Condition: new, Original LIEBHERR spare parts. Available for all models and types. From filter kits to main hydraulic pumps. From displays to wiring harnesses. Please contact us. When inquiring, please provide the serial number and, if possible, the LIEBHERR spare part number. Ncsdpfxow U Adms Afrow

Condition: used, Year of construction: 2020, operating hours: 12,057 h, Liebherr LH 50 M material handler, year of manufacture: 2020, operating hours: 12,057 h, incl. timber grab, front and rear dozer blade, heating, air conditioning, all-wheel steering, steering wheel & joystick steering, central lubrication for upper and lower carriage, engine: Liebherr [170kW/230HP], weight: approx. 40,300 kg, good condition, immediately available for operation. Upon request, we can provide a leasing or financing offer. Mr. Mihm (Tel.) will be happy to assist you. For further information, please visit our homepage. Subject to prior sale and errors. ZSA = Further information = Nsdpfeyfrpyex Afrocw Drive: Wheel Please contact Tobias Ebert for more information.

Condition: used, Year of construction: 2004, functionality: fully functional, CNC gear hobbing machine Control: Siemens 840 D Power Line Technical data: Max. workpiece diameter: 150 mm Table diameter: 145 mm Max. table speed: 800 rpm Distance between centers: 10 – 200 mm Max. axial travel: 250 mm Swivel angle of milling head: +/- 45° Ncjdpfxjzkwvns Afrew Max. tailstock travel: 300 mm Max. rapid traverse rate: 17,000 mm/min Drive power of milling head: 19 kW Max. module: 3 mm Max. speed of milling spindle / tool speed: 4,500 rpm Max. diameter of hobbing cutter: 80 mm Max. length of hobbing cutter: 200 mm Dimensions approx.: 5.5 x 3.7 x 3.1 m Weight approx.: 9,500 kg Equipment: Chip conveyor Oil mist extraction / oil extraction Oil cooler Steady rest with lowering device and vertical adjustment Rotary ring loader with two workpiece grippers Loading belt system for automatic feeding 5 milling arbors / hobbing cutter holders: 1 x Ø 22 mm 2 x Ø 27 mm 1 x Ø 32 mm 1 x Ø 40 mm Other: Video recordings via WhatsApp

Condition: used, mileage: 72,004 km, power: 260 kW (353.50 HP), first registration: 06/2017, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, next inspection (TÜV): 12/2025, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2017, Equipment: ABS, air conditioning, all wheel drive, crane, navigation system, Liebherr Mobile Crane LTC 1050-3.1 with lattice jib extension !!! The crane received a new engine 2 years ago !!! The new engine has only run 3,000 km Upper carriage: 3,330 h Carrier: 2,344 h * Max. lifting capacity: 50 t * Max. hoisting height: 48 m * Max. outreach: 39 m Ncodpfx Aox Im U Rofrsw Technical data: Max. lifting capacity: 50 t at a radius of 3.00 m Telescopic boom from 8.10 m Telescopic boom up to 36.00 m Lattice jib from 1.50 m Lattice jib up to 13.00 m Carrier engine / Manufacturer: Cummins Carrier engine: 6-cylinder diesel Carrier engine output: 243 kW Number of axles: 3 Drive/steering: Standard 6 x 6 x 6 Travel speed: 85.00 km/h Total counterweight: 6.50 t We are also happy to assist you with financing/leasing options through our partners. All information without guarantee. Subject to error and prior sale.

Condition: used, Year of construction: 1969, max. wheel diameter 265 mm gear width 45 mm max. module 4 min. module 0,3 max. workpiece diameter 300 mm stroke length max. 0-50 mm stroke position adjustment 25 mm Nsdpfx Ast Hwrujfrscw distance work spindle /surface of the table 170/245 mm spindle taper innen MK 4 table-size 180 mm table hole 95/75 mm strokes per minute 450 - 840 total power requirement 10 kW weight of the machine ca. 5200 kg dimensions of the machine ca. m Max. gear Æ (external) approx. 265 mm Max. workpiece Æ for internal gears 300 mm Max. gear width 45 mm Module range 0.3 - 4 Length of stroke 0 - 50 mm Adjustment of length of stroke 25 mm Distance between table and spindle, min./max. 170/245 mm Spindle taper (external 90 / internal 50) MT 4 Table size 180 mm Table bore 95 / 75 mm Table travel, cross, approx. 175 mm Number of strokes, infinitely variable 450 - 840 /min Feed range 0.09 - 0.6 mm/stroke Rotary feed, strokes per cutter revolution 2,722 - 681 Total electrical load 10 kW - 380 V - 50 Hz Weight 5,200 kg Accessories / Special Features * Selection switch for various working programmes, and for manual control. * Multi-cut device for roughing, finishing and sparkout, via presettable micrometer screws. * Hydraulic workpiece external clamping device mounted on table, for internal gears (a sort of collet chuck). * Separate switch cabinet. * Separate hydraulic unit. * Hydrostatic straight guide, with cooling aggregate for the hydrostatic pressure oil, separate. * Lateral table adjustment ensures optimal ram lift from workpiece. * Infinitely variable number of strokes via DC motor. * Built-on coolant device. * Presettable impulse counter for switching off table after every cut. With digital display. * Various change gears.

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small Ncsdpfx Afjt Hw R Dorew coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1999, max. wheel diameter 280 mm gear width 330 mm max. module 5 min. module 1 Control LIEBHERR CNC total power requirement 28 kW weight of the machine ca. 12 t dimensions of the machine ca. m Nedpfot Hwu Aox Afrecw

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (contact via phone). Liebherr Wheel Loader Quick Coupler suitable for L556 / in stock & immediately available / good condition Price: €3,490.00 net / €4,153.10 gross This quick coupler is suitable for a Liebherr L556. We have a very large selection of various attachments in stock and immediately available! Mr. Herden (phone) is happy to assist you. Finance offers available upon request. We are official distribution and service partners for: - Magni telescopic handlers - Holp - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - Seppi M. - JCB construction machinery - Mercedes-Benz - Iveco With 800 used commercial vehicles in inventory, we are also one of the largest commercial vehicle dealers in Germany. Ncjdpfx Asznrrlofrew We supply the complete Holp product range for you! Errors and prior sale excepted. Internal ID: 656005 = Further information = Intended use: Construction For more information, contact Marius Herden.

Condition: good (used), Year of construction: 2001, serial number 630-8394 Ncodozip Ruspfx Afrsw output 210 kw Number of working hours 9050 h with extended boom, type: LO4651B, serial no. 3001335Note: The Longfront has a long and a short boom!

Condition: new, Year of construction: 2006, Storage location: 100545026 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Lifting mechanism 65kW Njdpjzpdrmsfx Afrjcw 1 x Undercarriage 6.0m track width and required central ballast Tower sections for 30m hook height Slew radius 50m including counterweight Color: Yellow Includes HBC radio control system Location: Regensburg

Condition: used, Year of construction: 2015, operating hours: 9,014 h, * Radio * On-board computer * Rear view camera * Driver comfort seat * Seat heating * Air intake at the top * Exhaust behind the driver's cab * Central lubrication ----Structure: ROPS driver's cab fully glazed, touch screen monitor with color display. Liebherr 4-cylinder diesel engine D934A7, 7,014 cc, 129 KW/175 HP, Liebherr compact planetary gear with 2 speed levels (level 1-3.7 km/h, level 2-6.1 km/h). Adjustable boom, hydraulic quick-change system, 5 additional hydraulic connections. Transport dimensions read approx: 10,500x3000x3060mm (LxWxH), chain width approx. 750 mm, track width: 2,250 mm----Last service carried out in 02/24 at 8,022 hours Ncedpfxsv H Ht Es Afrew Sale only to traders. ONLY THE NET PRICE IS TO BE PAID FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see imprint).

Condition: used, Year of construction: 2015, operating hours: 9,014 h, * Radio * On-board computer * Rear view camera * Driver comfort seat * Seat heating Ncedpfx Asv H Htljfrew * Air intake at the top * Exhaust behind the driver's cab * Central lubrication ----Structure: ROPS driver's cab fully glazed, touch screen monitor with color display. Liebherr 4-cylinder diesel engine D934A7, 7,014 cc, 129 KW/175 HP, Liebherr compact planetary gear with 2 speed levels (level 1-3.7 km/h, level 2-6.1 km/h). Adjustable boom, hydraulic quick-change system, 5 additional hydraulic connections. Transport dimensions read approx: 10,500x3000x3060mm (LxWxH), chain width approx. 750 mm, track width: 2,250 mm----Last service carried out in 02/24 at 8,022 hours Sale only to traders. ONLY THE NET PRICE IS TO BE PAID FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see imprint).

Condition: used, Year of construction: 2023, operating hours: 700 h, – Swivel arm assembly (Z-linkage) 2200 mm – Tires: Mitas EM-01 168A2/156B Ncodezn Hbhepfx Afrew – Standard radio – Incl. bucket – Incl. forks

Condition: used, power: 120 kW (163.15 HP), Year of construction: 2017, operating hours: 13,242 h, Drive: Wheel Njdpfx Aezmx Drsfrscw Empty weight: 18.000 kg Please contact Emal Jaweed for more information

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5-K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm Accessories: Includes extensive accessories (see photos) -Not included: Template for helical gearing -Machine dimensions: 2300/1460/H1870 mm Ncsdpfxsv Dtmmo Afrow -Accessory dimensions: Pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories