Cylin. grinding mach. 0-599mm grind. length for sale
8
14” X 72” CINCINNATI MODEL L PLAIN CYLINDRICAL GRINDER
SPECIFICATIONS
Swing Over Bed 14 inches
Rated Distance between Centers 72 inches
Workhead Speeds 20 - 200 RPM
Workhead Drive 2HP
Workhead Taper No.12 B&S
Maximum Grinding Wheel Size 30" x 3" x 12" Bore
Wheelhead Drive 15HP
Table (Carriage) Type 2pc with Taper Adjustment
Table Traverse Rate (Infinitely Variable) 3 - 200 IPM
Footstock Type Handwheel + Lever
Footstock Center No.12 B&S
Electrics 3/60/460v
Approximate Dimensions (LR x FB x H) 24...
4
Centerless cylindrical grinding machineFabr.Nomoco Type:M100ESeries:S107Working range: Diameter up to:100mmLength up to:400mmComplete machine documentation available.see machine card for further data.
Bfeum0esy9
15
Cylindrical grinder grinding machine
Model: Inside and outside
Bynqlssq7j
Manufacturer: :Jones &: Shipman
Type: Model 1310
Capacity: 200 x 460mm
Table-traverse: 75-3660 mm/min
11
Technical details
B080gbh3ls
grinding diameter 120 mm
grinding length 110 mm
control Siemens 840 D
total power requirement 56 kVA
weight of the machine ca. 6,3 t
dimensions of the machine ca. 3,8 x 2,6 x 2,2 m
Additional information
STUDER S140 - CNC cylindrical OD + ID grinding machine
DESCRIPTION
Built in 2002 Hours 56,760
Current state Not in operation in good mechanical condition /
Conversion from Acomel to Vacon not yet completed
Missing couple of Heidenhein scales.
Max I/D grinding ...
10
grinding diameter 120 mm
B2cuvuqfgs
grinding length 500 mm
centre height 100 mm
6
Catalog No. : 5574
Type: JHU 3510
Producer: JAINNHER
Made in: 2019
Characteristic:
Control system: FANUC 0i TF
Maximum grinding length: 1000 mm
Grinding diameter: 330 mm
Maximum weight of the workpiece: 130 kg
Maximum grinding wheel diameter: 405x50x125
4 mm
Grinding diameter: 350 mm
Spindle taper: MT4
Machine weight: 4300 kg
Equipment:
Technical books
3-jaw chuck
Tool probe
Workpiece probe Balance Systém
GAP sensor
Paper filtration
Magnetic separator
Steady rest 2x
Tool casse...
6
grinding diameter 160 mm
grinding length 250 mm
centre height 80 mm
Y2mqrt
dimensions of grinding wheel 250x20x76 mm
max. workpiece diameter 160 mm
swivelable +/- 90 °
turning speeds 2420 / 3290 U/min
total power requirement kW
weight of the machine ca. 1,7 t
dimensions of the machine ca. 2,0 x 1,2 x 1,6 m
9
- - - machine - - - - - - - - -
Dimensions (L x W x H) 2.000 x 1.510 x 2.000 mm
weight 3.000 kg
Byd99swux9
The machine is in a well-maintained condition.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
#Tags: AFB500S | AFB500 | 500S
12
Ready to use universal cylindrical grinding machine
Kellenberger 600 U - 175 (internal grinding device with internal spindle included)
Centre distance: 600 mm - Centre height: 175 mm
Pv7xey
Available with various accessories.
Availability: immediately!
Viewing possible by arrangement.
1
Center height 100 mm
Yjtsfnqh
Distance between center 480 mm
Longitudinal path 420 mm
Grinding wheel 450 x 80 mm
Spindle speed 1290 1/min
14
Ref. -No.: 10149
Brand: KELLENBERGER
Type of control: CNC
Control: Kelco 80
Storage location: Halberstadt
Country of origin: Schweiz
Max. Grinding diameter: 350 mm
Machine-No.: 650095
Grinding Length: 1000 mm
Pxcb2
Operating hours: 45.000 H
3
grinding diameter:320 mm
grinding length:500 mm
centre height:165 mm
total power requirement:34 kW
S9uvliv7
weight of the machine ca.:13,5 t
dimensions of the machine ca.:6,5 x 5,4 x 2,2 m
clamping length:520 mm
working spindle drive:1,5 kW
work piece spindle speed:0-600 U/min
grinding wheel diameter:560-750 mm
grinding wheel width:30 mm
grinding wheel peripheral speeds::max. 50 m/sec
grinding spindle drive:15 kW
grinding spindle speed:650-1800 U/min
max. X-axis travel:464 mm
max. Z-axis travel...
6
centre distance 1.000 mm
380 mm
documentation ja
Mupxcc
weight of the machine ca. 2,9 t
5
grinding diameter:300 mm
grinding length:600 mm
centre height:180 mm
swing dia.:360 mm
clamping length max.:1000 mm
max. workpiece weight between centers:80 kg
max. workpiece weight -without tailstock:50 kg
max. dia. of grinding wheel:500 mm
grinding wheel width:100 mm
grinding wheel hole diameter:203,2 mm
peripheral speed:45 m/sec
grinding motor:10 kW
Quick traverse speed Z + X:10000 mm/min.
spindle speeds:1 - 1200 1/min.
taper in workpiece headstock:4
tailstock quill diameter:50 mm
tailstock ...
3
grinding diameter 5 - 255 mm
grinding length 300 mm
centre height 130 mm
grinding length at plunge grinding 50 mm
control SINUMERIK 805
grinding spindle speed 25 - 1400 U/min
work piece spindle speed 0 - 500 U/min
feed of grinding spindle slide cross 0 - 5000 mm/min
table speeds 0 - 5 m/min
grinding wheel diameter 450 mm
total power requirement 10 kW
weight of the machine ca. 2,3 t
dimensions of the machine ca. 2,65 x 2,2 x 2,35 m
Beoha9lkv3
Accessories: grinding wheel with flange, 3-jaw chu...
4
control Siemens 840D solution line
Grinding length outside max. 400mm
Blwhwf3o07
Inner grinding length 200mm
Grinding wheel diameter: max. 400mm
Grinding wheel width: max. 63mm
Outside grinding diameter 150mm
Inner grinding diameter 200mm
Tailstock travel: 400mm
General overhauled in 2016 !
8
grinding diameter 0 - 400 mm
grinding length 2500 mm
centre height 200 mm
spindle turning speed range 600 - 1500 U/min
dimensions of grinding wheel 750 x 63 x 305 mm
workpiece turning speeds 18 - 250 U/min
workpiece weight max. 1000 kg
total power requirement 15 kW
weight of the machine ca. 9,2 t
Bvtahszqtq
dimensions of the machine ca. 6,2 x 2,3 x 1,7 m
5
grinding diameter: 240 mm
grinding length: 700 mm
centre height: 125 mm
table length: 1525 (schwenkbar) mm
distance grinding spindle - table min./max.: 225/410 mm
rpm speed range - grinding wheel: 1590 U/min
grinding wheel dia. (unused wheel): 600 mm
grinding wheel dia. (used wheel): 450 mm
cutting speed: 50 m/s
total power requirement: 13 kW
weight of the machine ca.: 5,5 t
space requirements of the machine approx.: L:2,8xB:2,2xH:1,8 m
Cylindrical grinding machine, semi-automatic operation
- gr...
6
grinding diameter mm
grinding length mm
Run0ger7
centre height mm
travel -x axis 700 mm
milling-head swivable +/-
weight of the machine ca. 3 t
5
grinding diameter:450 mm
grinding length:1600 mm
Tq3a93kx
Measuring control: Movomatic ES600 (for measuring longitudinal part and diameter)
CNC control GE Fanuc Series 16-GC
5
grinding diameter:500 mm
grinding length:2000 mm
centre height:251 mm
max. workpiece weight between centers:500 kg
workpiece spindle head::5 MK
tailstock quill taper MT:4 MK
Bc29nj9q
Grinding wheel diameter / width / bore:400/100/127 mm
Grinding wheel motor:4 KW
Further technical data, and standard and optional equipment, as defined in Appendix.
Payment: 100% before loading of the machine
Warranty: no
3
With internal grinding device
Centre height: 160 mm.
Eqf0v9j7o
Grinding length: 500 mm.
Spindle sleeve mounting: MK 4
Grinding wheel dimensions: max. 355 x 50 mm.
Grinding wheel speed: 1700 and 2100 rpm.
Incl. coolant system, div. grinding wheels
and documentation. Unfortunately without tailstock.
Weight: approx. 1950 kg, dim. LxDxH: approx. 1800 x 1100 x 1700 mm.
The machine can be inspected under power by arrangement and is available immediately. Free loading ex location.
Please also note my o...
11
Studer S20-2 conversion to direct drive in X/Z-axis
Universal cylindrical grinding machine completely mechanical and electrical Premium overhauled for external / internal grinding
grinding length: 400 mm
centre height: 80 mm
- Hydrodynamic grinding spindle bearing
Bh7k7huazo
- Internal grinding device with accessories
- completely new control cabinet with Siemens SPS components
- Considerably faster setup [Enter values on the touch display].
- Glass scale in X and Z axis incl. control panel for ...
2
Catalog No. : 5605
Type: RFH 300
Producer: Schaudt
Made in: 1963
Characteristic:
Maximum grinding length: 350 mm
Maximum grinding wheel diameter: 300 mm
Max. diameter of workpiece: 160 mm
Tip height: 100 mm
Equipment:
Tips
Hyobmsb
Collets
2-3 disks with flanges
6
centre distance 750 mm
max. 400 mm
100 mm breit mm breit
Pazz9
weight of the machine ca. 4 t
5
grinding diameter:280 mm
grinding length:1000 mm
centre height:140 mm
travel -z axis:900 mm
Workpiece weight approx.:30 kg
grinding wheel diameter:400 mm
Ifkbcdpkk
peripheral speed:140 m/sec
total power requirement:70 kW
weight of the machine ca.:15 t
dimensions of the machine ca.:5 x 5 m
Junker Quickpoint 5002/20 in perfect condition. first Hand, incl. high class Coolat device with Filter System
6
GP CNC 300B Premium retrofit cylindrical grinding machine
Condition: retrofitted (like new)
Bgzoechusy
Make Karstens
Technical data:
Center distance: GP CNC 300B: up to 380 mm
centre height: 180 mm, optionally other centre heights possible
max. workpiece weight between centres: 300 kg
max. workpiece weight flying including clamping device: 70 kg
Workpiece headstock: MK 4, optionally other tapers possible
Tailstock: MK 4
disc diameter: 400 mm / 500 mm
Wheel arrangement: different arrangements and...
9
grinding diameter 350 mm
grinding length 1000 mm
centre height 200 mm
connected load frequency 3x380V 50Hz
total power requirement 7 kW
weight of the machine ca. 3,5 t
dimensions of the machine ca. 3,3x2,0x1,6 m
We offer an external cylindrical grinding machine from the manufacturer TITAN
with type RU 350.1 x 1000. The machine was built under license from FORTUNA in
machine was used until now at a neighboring Bavarian job shop.
The machine is complete and was in use until 2021.
Come and...
4
Premium overhaul Schaudt PS51 S600
CNC grinding machine for series production!
- grinding length: 600 mm
- centre height: 180 mm
- grinding wheel width: 220 mm (optionally up to 320mm possible)
- workpiece weight: 350 kg
- Hydrodynamic external grinding spindle bearing
- Automatic coolant supply
-rotating dressing tool (slide roll)
- completely new control cabinet with Siemens 840 DSL components
- Quick setup via GSN user interface
- Glass scale in X and Z axis
- Balancing and ground sensors
- ...
grinding diameter 250 mm
grinding length 400 mm
centre height 125 mm
Control GE FANUC Series 21i-T
total power requirement 4 kW
weight of the machine ca. 3 t
dimensions of the machine ca. 2,5x1,5x,2,2 m
Bqes3uk72u
Partially revised with new paintwork
CNC cylindrical grinding machine
Peak height 125 mm
Tip width 400 mm
Workpiece weight between tips max. 30 kg
Grinding wheel on the left:
Diameter 400 mm
Width 40 mm
Grinding wheel on the right:
Diameter 400 mm
Width 40 mm
B-axis swivel range -...
Center height: 100mm
Distance between centers: 400mm
CNC: Fanuc 16T Pictogramming
Internal grinding: Yes
Swivel: 0-30°
Center distance: 400mm
InternaL-External CNC cylindrical grinding machine
STUDER S20 CNC
CNC Fanuc 18T with Pictogramming
Center height: 100mm
Center distance: 400mm
Grinding wheel 350x32x127 mm
Stroke 120mm
Swivel: 0-30°
2 Marposs gauges
3 electrospindles for internal grinding (60, 90 and 120 000 RPM)
Btxmmoec
Installed power 12kVA
Dimensions 1690x1430x1755
Under power in our w...
10
grinding diameter 500 mm
grinding length 800 mm
centre height 180 mm
total power requirement 11 kW
weight of the machine ca. 4,5 t
Retrofit 2017
Dnwy0afig
6
GP CNC-300 Premium retrofit cylindrical grinding machine
Condition: retrofitted (like new)
Make Karstens
Technical data:
Grinding wheel protection flap(s) automatic, built into protective hood
Center distance: GP CNC 300: up to 380 mm
centre height: 180 mm, optionally other centre heights possible
Max. workpiece weight between centres: 300 kg
Max. Workpiece weight flying including clamping device: 100 kg
Workpiece headstock: MK 4, optionally other taper possible
Tailstock: MK 4
Grinding wheel di...
11
General Data
Measurements width 4345 mm
Measurements depth 1750 mm
Machine weight 2500 kg
Jfdlxvh
Main Drive
Spindle speed range 200-400
Workpiece
Workpiece drm 350 mm
This KELLENBERGER 1000 U Grinding Machine was made in the year 1980, and totally rebuilt in 2019. This machine can operate with a spindle speed range 200-400 rpm. This machine geometrically works with a precision like a new machine.
Application Types
Grinding
3
Bahmueller B24
Universal cylindrical grinding machine completely mechanically and electrically premium reconditioned for external grinding.
Ugyk7irf
- grinding length: 240mm
- centre height: 125mm
- Hydrodynamic grinding spindle bearings
- completely new control cabinet with Siemens 840 DSL components
- Quick setup via GSN user interface
- Glass scale in X and Z axis
- Workpiece headstock: infinitely variable speed
- other options on demand, such as
- pneumatically operated chuck with integrated...
13
Cylindrical grinder grinding machine
Svlnno
Model: Outside
Manufacturer: :Schaudt
Type: :ERS 400
Center-distance: 400mm
Grinding-diameter: 200mm
Grinding-wheel: 300mm
grinding diameter:600 mm
grinding length:2500 mm
centre height:300 mm
max. workpiece weight between centers:1000 kg
grinding head swivellable +/-:30 °
workpiece spindle bore:42 mm
spindle turning speed range:1000-1250 U/min
work piece spindle speed:9-250 U/min
table speeds:100-5000 mm/min
total power requirement:15,48 kW
steady fixed:bis 120 mm
Bg7wso9p3
Further technical data, and standard and optional equipment, as defined in Appendix.
Payment: 100% before loading of the machine
Warranty: n...
9
Technical data of the machine:
- Control: Fanuc 180i-TA
- Robot: LR-Mate 100i-RJ2-CE
Bnr8gvspvr
- Axes: X, Z and B / A axis hydr.
- workpiece diameter: 5 - 50 mm
- workpiece length: 50 - 300 mm
The machine is in a used, very good condition and ready for use. The machine was in production for the first 10 years in 3-shift operation. The last 10 years only in 2 or 1-shift operation. The machine has been serviced at regular intervals and a large number of repairs have been carried out to ensure the...
6
CNC universal cylindrical grinding machine U60-500
centre distance: 600 mm
grinding length: 500 mm
Centre height: 200 mm, optionally up to 300 mm
Workpiece weight between centres: 250 Kg, flying 100 Kg, optional between centres up to 500 Kg
Machine bed made of UHPC
X-axis and Z-axis with proven cross slide technology
Travel: X=400 mm, Z=570 mm
Traversing speed: 0-12000 mm/min
Straight stitch (disc left) or angled stitch 30 degrees (disc right)
optionally other grinding wheel variants or several ...
6
grinding diameter: 500 mm
grinding length: mm
centre height: 160 mm
swing diameter: 315 mm
centre distance: 1500 mm
max. workpiece weight: zwischen Spitzen: 250 kg
revolution per minute of spindle head: 1.230 U/min
grinding head swivellable +/-: rechts/links °
tailstock quill taper ISO: MK 4
spindle headstock:
dimensions of grinding wheel: mm
grinding head swivelling: nein Grad
table-size: 2540 x 230 mm
table swivable approx.: rechts/links: 5°
table speed: 0,005 - 5 m/min.
longitudinal feed of ...
1
Studer S30
Universal cylindrical grinding machine completely mechanical and electrical Premium overhauled for external / internal grinding
-tip height: 125mm
-tip width: 600mm
- Hydrodynamic grinding spindle bearing
- Internal grinding device with accessories
- completely new control cabinet with Siemens SPS components
- Considerably faster setup [Enter values on the touch display].
Iz7bffm2s
- Glass scale in X and Z axis incl. control panel for easy setup and operation
- New drive motor on the ...
8
Machine as in the pictures for interior and exterior grinding.
Collet set
B0937lypud
Many accessories included.
5
grinding diameter:65 mm
grinding length:1000 mm
centre height:205 mm
greates pass round over bed:190 mm
total power requirement:60 kW
weight of the machine ca.:11 t
dimensions of the machine ca.: 4,5 x 3,1 x 2,2 m
Cylindrical grinding Machine JUNKER JUMAT 51 CNC with FANUC 210 i in good running condition.
Lj8j3mo
The Junker Jumat 51 has no B-axis and is designed according to the nameplates for CBN - Schrägeeinstechschleifen (see pictures)
Catalog No. : 5604
Type: RFH 300
Bynyo2rpqp
Producer: Schaudt
Made in: 1963
Characteristic:
Maximum grinding length: 350 mm
Maximum grinding wheel diameter: 300 mm
Max. diameter of workpiece: 160 mm
Tip height: 100 mm
Equipment:
Tips
Collets
2-3 disks with flanges
9
Bahmueller ASP 400
Condition: retrofitted (like new)
Make Bahmüller
Technical data:
centre distance: 400 mm
centre height: 125 mm
Work headstock: MK 4
Tailstock: MK 3
Grinding wheel diameter up to 500 mm;
Total connected load: approx. 20 KW
Machine weight: approx. 2800 Kg
Basic equipment of the machine:
Axes: X, Z, C axis
Grinding headstock: asynchronous motor 7,5 KW
constant grinding wheel peripheral speed: up to 50 m/s, cutting speed preselectable, automatic readjustment after dressing
Work he...
2
capacity 400X250MM
spindle 5KW
B0y7hoh07r
coolant
tooling
weight 1800KGS
5
Studer S20 OC
Universal cylindrical grinding machine completely mechanical and electrical Premium overhauled for external / internal grinding
7khj7bkfq
grinding length: 400 mm
centre height: 80 mm
- Hydrodynamic grinding spindle bearing
- Internal grinding device with accessories
- completely new control cabinet with Siemens SPS components
- Considerably faster setup [Enter values on the touch display].
- Glass scale in X and Z axis incl. control panel for easy setup and operation
- New drive mo...
grinding diameter 200 mm
grinding length 600 mm
centre height 150 mm
Control Fanuc 210i
grinding wheel diameter 290 - 400 mm
peripheral speed 45 m/sec
total power requirement 17 kW
Bfbwtxefgj
weight of the machine ca. 5,2 t
dimensions of the machine ca. 3,3 x 2,7 x 2,1 m
Machine internal + external spindle!
6
Niederhelfenschwil, Switzerland
(dealership location)