Used Gesan Dv 180 for sale (6,757)

Condition: good (used), Year of construction: 2016, power: 18 kW (24.47 HP), Single Advanced Oil D2-180-18-0 – Oil Temperature Control Unit Manufacturer: Single Temperiertechnik GmbH Model: Advanced Oil D2-180-18-0 Year of manufacture: 2016 Heating capacity: 18 kW Specific heating output: 23.2 kVA Rated current: 32 A Supply voltage: 3×400 V / N / PE Frequency: 50 Hz Max. temperature: 180°C Max. operating pressure: 3.1 bar Safety valve: 6.0 bar Medium: heat transfer oil Max. external filling quantity: 22 litres Net weight: 169 kg Dimensions: standard design (according to unit type) Application: temperature control for industrial processes, tooling, plant modules Location: Schierling Ledpfxjyrncis Ah Njah

Condition: excellent (used), Year of construction: 2016, Horizontal Band Saw PROMAC SX 818 DV-M Year of construction: 2016 Blades dimensions: 20 x 0,9 x 2080 mm Max cutting capacity: Ø 180 mm Max vise opening: 220 mm Cutting speeds: from 30 to 80 m/min. Motor power: 2 KW Blade Speed by variable speed drive Automatic or manual descent Lubricant pump Voltage: 220 V mono Lodpjz Sr Dnsfx Ah Neah Width: 800 mm Depth: 1200 mm Height in low position: 1500 mm Weight: approx 200 KG Machine in very good condition

Condition: new, Year of construction: 2007, Storage location number: 100577028 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Location: Passau Dimensions: 3,750 x 1,450 x 2,180 mm (L x W x H) Weight: 3,644 kg Engine: Volvo TAD740GE Fuel: Diesel Ljdpfxszp T Tao Ah Njah Power output: 250 kVA

Year of construction: 2006, condition: used, functionality: fully functional, Pinacho Smart 180 lathe in excellent working condition Lajdpfx Aheygq R So Noh

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). Lsdpfx Ahozb Dr Ss Nsah System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Condition: good (used), Nagel Citoborma 180 Paper Drill This machine is 100% functional. This is the latest model. The drill table is adjustable in all directions (sides, front/back). It has stops for setting the drilling spacing. The installed table is an enlarged version. Additionally, the drill has an automatic table lock that releases after each cycle. Very good condition. Solid construction – weight 65 kg. 230V power supply Laodez Rk Hxspfx Ah Noh One drilling head. Drill diameter 2-20 mm. Stack height 60 mm. The machine has been serviced. Includes drills and tools, a new cutting stick, and an instruction manual.

Condition: like new (used), Year of construction: 2017, operating hours: 180 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 460 mm, spindle speed (max.): 10 rpm, spindle speed (min.): 10,000 rpm, table length: 800 mm, type of input current: three-phase, total height: 2,200 mm, total length: 2,164 mm, total width: 1,860 mm, overall weight: 2,800 kg, table load: 300 kg, grinding spindle motor power: 15,000 W, workpiece weight (max.): 300 kg, Equipment: documentation/manual, rotational speed infinitely variable, type plate available, OPTIMUM OPTImill F 105 CNC machining center (vertical) – year of manufacture 2017 For sale is a vertical, high-performance CNC machining center from the reputable manufacturer OPTIMUM, model OPTImill F 105 CNC. The machine was only exhibited at trade shows and is in excellent condition and ready for immediate use. The unit has only approximately 180 operating hours! General information: • Condition: Like-new demonstration machine (year of manufacture 2017) • Control: Intuitive and reliable Siemens Sinumerik 808D advanced • Premium accessories: Including high-quality RENISHAW Primo measuring probe for maximum precision • Spindle performance: Dynamic spindle up to 10,000 rpm with BT 40 tool holder _____ Technical data: Travel distances: • X-axis: 550 mm • Y-axis: 305 mm • Z-axis: 460 mm • Spindle/table distance: 100 – 600 mm Main spindle: • Speed range: 10 – 10,000 min⁻¹ • Drive power: 11 kW (short-term) / 7.5 kW (continuous) • Max. torque: 70 / 48 Nm • Tool holder: BT 40 Work table: • Clamping area: 800 x 320 mm • Max. table load: 300 kg • T-slots: 3x 14 x 100 mm Automatic tool changer (ATC): • Number of positions: 12 positions (carousel) • Max. tool diameter: 70 mm • Max. tool weight: 6.0 kg • Tool change time: only 7.0 seconds (tool-to-tool) Dynamics & accuracy: Lasdpszkhvrsfx Ah Njh • Rapid traverse (X / Y / Z): 10 m/min • Feed rate max.: 10,000 mm/min • Repeatability: +/- 0.008 mm • Positioning accuracy: +/- 0.01 mm Connection and space requirements: • Total power requirement: 15 kVA • Machine weight: approx. 2,900 kg • Space requirement (L x W x H): approx. 3.5 x 2.5 x 2.4 m _____ Scope of delivery: • CNC vertical machining center OPTImill F 105 CNC • RENISHAW measuring probe • Integrated 12-position tool changer • Efficient chip removal system • Powerful coolant system with coolant pump • Complete, original documentation/manual Are you interested? A demonstration under power can be arranged.

Condition: good (used), For sale: used industrial submersible pump, KSB KRTF 100-250/74UG2-249, complete with control box, cables, and chain. The pump features a side discharge connection with a Storz-type coupling and a base for positioning the unit. Data from the nameplate: Manufacturer: KSB Type: KRTF 100-250/74UG2-249 Capacity: 5–180 m³/h, maximum approximately 3000 l/min Head: 17.4–6.2 m Rated power P2: 7.5 kW Supply: 400/690 V, three-phase Frequency: 50 Hz Rotational speed: 1450 rpm Rated current: 15.3/8.4 A Maximum medium temperature: 40°C Degree of protection: IP68 Operating mode: S1 Insulation class: F Power factor cos φ: 0.81 Impeller diameter: 249 mm Included in the set: Pump with motor. Control box with buttons, switch, and operating hour counter. Power and control cables. Lodpfxjz Spiqs Ah Nsah CEE power plug. Chain. Storz-type discharge coupling.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: DV 800, type of input current: three-phase, input voltage: 400 V, operating pressure: 6 bar, input current: 16 A, We offer this used Stiller DV 800 semi-automatic can seaming machine with a work table, manufactured in 2020. According to production records, approximately 30,000 cans have been sealed. Serial number: 20089 Cans: Diameter 40-99 mm, height 20 - 150 mm (seaming unit included) Year of manufacture: 2020 Weight: 140 kg Voltage: 230/400 V Current: 16 A Frequency: 50 Hz Power: 0.6 kW Compressed air: 3.4 m3/hour at 6 bar. Cans in 2 different heights, including lids (approximately 6,000 pieces each), are available for the installed seaming unit. Ljdez I Ty Iopfx Ah Njah Installed seaming head (replaceable) up to 99 mm, chuck (replaceable) exactly 60 mm. Compressed air, including air dehumidifier, is required for operation. The option to purchase an air compressor and air dehumidifier, including couplings and connecting hoses, is available. Forklift/ramp for loading is available. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: ab0307002198, Autobag AB 180 OneStep – fully automatic bag packaging machine with thermal transfer printer Year of manufacture: 2007 | Location: 41564 Kaarst-Holzbüttgen Delivery and collection possible by arrangement. For sale is a used Autobag AB 180 OneStep (Automated Packaging Systems) – a proven, robust, and flexible bag packaging machine with an integrated thermal transfer printer. Equipment: • STANDARD SEAL FLATTENER • STATIC BACK SHELF (NO SUPPORT) • AB180 ONESTEP 203 dpi PRINT KIT (Thermal transfer printer PI-412c) • FUNNEL SIZE A12 • BD100 (Orange Loop / Bag De-aerator) Lsdpfx Ahsz Spqxe Njah Also included in the scope of delivery: 1 box with 13 film rolls (Autobag chain bags) Mode of operation (manufacturer's description): The AB 180 OneStep feeds an Autobag chain bag unwound from a roll through the printer, opens it by means of compressed air, and prepares it for filling. The products are placed manually or via feeding systems into the bag. Subsequently, the bag is sealed using a foot switch or automatically. The integrated thermal transfer printer eliminates the need for offline labeling – printing and packaging are carried out in one step (“Print-n-Pack” / Next-Bag-Out technology). Ideal for fulfillment, mail order, spare parts, small and medium-sized series with frequent product changes. Technical data (according to the product data sheet): • Weight: 142 kg • Dimensions: approx. L 1,700 × W 850 × H 1,150 mm • Electrical: 110/220 V, 50/60 Hz switchable • Compressed air: 150 l/min at 5.5 bar (dry, clean air) • Passage: up to 108 mm • Bag thickness: 35–100 µm • Bag sizes: width 50–270 mm | length 140–630 mm • Performance: up to approx. 30 bags/minute (with printing) We will gladly send you the product data sheet and other documents upon request. If you are interested, I look forward to hearing from you – I will be happy to prepare an individual offer for you, including shipping costs.

Condition: excellent (used), CATALOGUE NUMBER 72133 TECHNICAL DATA - max cutting height 180mm - track width 400mm - roller width 370mm - roller diameter 60mm - max blade diameter 300mm - blade bore diameter 80mm - min workpiece length 630mm - max workpiece width 600mm from above: - pneumatic pressure roller - pawls - metal pressure roller, 2 pcs Lajdpfjzrmn Aox Ah Noh - pawls - blade roller - smooth pressure roller - pawls - smooth pressure roller from below: - metal toothed pull roller, 2 pcs - pawls - track - blade roller - track - stepless feed rate adjustment via frequency inverter - main motors 2x55kW - feed motor 4kW - hydraulic body lifting up/down - hydraulic blade roller adjustment - pump motor 0.37kW - central lubrication - dust extraction port diameter 1x300mm, 1x380mm - dimensions L/W/H 3200x2350x2000mm - weight approximately 5500kg ADVANTAGES - Made in Italy - Two-roller - Multi-blade saw, used, very good condition Net price: 238900 PLN Net price: 55560 EUR Net price calculated at an exchange rate of 4.3 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, CATALOG NUMBER 7563 Technical data: - track width 340mm - roller width 360mm - disc bore diameter 70mm - max disc diameter 315mm - max cutting height 180mm * from above - feed roller, toothed, pneumatically pressed - 2 rows of ejectors - 3 sliding, smooth pressure rollers Lajdpfxezxqtvj Ah Nsh - ejectors - roller with saws - 3 sliding, smooth pressure rollers - ejectors * from below - feed roller, toothed - track - roller with saws - track - stepless feed rate adjustment via frequency inverter - main motor 2x55kW - feed motor 4kW - electric lifting of the upper body up/down - electric adjustment of the rollers with saws - central lubrication - diameter of the dust extraction nozzle 2x150mm - dimensions L/W/H 2800x2400x1900mm - weight approx. 5000kg ADVANTAGES – Made in Italy – Two-roller – Ideal for large components – Multi-blade saw, used, very good condition Net price: 145900 PLN Net price: 33930 EUR, depending on the exchange rate of 4.3 EUR (Prices may change due to higher fluctuations)

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand colour production system, the “Xerox Versant 180 Press” Items for sale: 1 x Xerox Versant 180 Press with the following specifications: incl. Fiery NX Pro-01 Includes A-CF01 paper deck Includes A-GW03/A-FN13 finisher Includes duplex ADF / R-ADF Not the right configuration? It’s no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 1,096,427 Black: Approx. 661,731 Colour: Approx. 434,696 Condition: This is a second-hand machine, which may show signs of wear (minor scratches or discolouration). The machine has been tested for functionality A test print can be seen in the photo Packaging and dispatch: You are welcome to view the device during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! Lsdpfxozxwypj Ah Neah A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, Year of construction: 2001, machine/vehicle number: 11572, functionality: limited functionality, operating hours: 47,262 h, overall weight: 1,950 kg, The BTSA 180 is a Bruderer high-speed precision stamping press with a nominal force of 180 kN (18 tons). It is designed for continuous production with progressive dies and variable stroke rates from 100 to 1300 strokes per minute. The press is equipped with a Bruderer BZV 60 strip feeder, which processes strip widths up to 60 mm and material thicknesses up to 2 mm. The stroke is adjustable between 8 and 40 mm, and the strip feed height is adjustable between 50 and 100 mm to accommodate different tools and material profiles. In addition, a Bruderer U control system from Siemens is installed. Ljdpjz H H Dqofx Ah Noah The machine is partially functional: The buttons responsible for the two-hand control system respond with a delay or not at all in setup mode during material threading, which makes material threading time-consuming. The machine's spring dampers are worn, causing the machine to vibrate significantly during continuous operation. The rubber mounts for the dies are brittle and breaking off. The UVV inspection for 2025 has been carried out, as well as the annual maintenance for 2025. Nominal force: 180 kN (18 tons) Stroke rate: 100-1300 strokes per minute (variable) Strip feed: Bruderer BZA 60 Adjustable stroke: 8-40 mm Main drive: 16 kVA Power supply: 400 V / 50 Hz Table area: 300x400 mm Strip feed height (adjustable): 50-100 mm Max. strip width: 60 mm Max. material thickness: 2 mm Machine dimensions: approx. 1300x1000x2300 mm Weight: 1950 kg Operating hours: approx. 47262 The machine is currently not running but is still connected so that it can be used in an emergency for production. Dismantling and removal are planned for the end of December, as a crane will already be on site by then to load the machine.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, power: 2 kW (2.72 HP), input frequency: 60 Hz, input voltage: 575 V, overall weight: 750 kg, Brand new twin-shaft batch mixer from BHS-Sonthofen for the intensive and homogeneous mixing of various bulk materials. Technical data: Type: DKXC 180 Lajdpfxezumpxs Ah Nsh Year of manufacture: 2020 Nominal capacity: 180 liters / 0.18 m³ Drive: 2 × 5.5 kW Voltage: 575 V / 60 Hz Weight: approx. 750 kg pneumatically operated discharge flap Location: Canada The electrical control system was manufactured according to Canadian regulations and must be inspected for operation in Europe and, if necessary, modified to comply with European regulations. The mixer has never been used. Technical specifications are subject to change without notice and are offered for sale subject to prior sale.

Year of construction: 2023, operating hours: 400 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 9457SH, ElectroHeat Conveyor Oven - Year 2023 High-quality ElectroHeat conveyor oven in excellent condition, manufactured in 2023. The oven is designed for continuous heat treatment processes and features four independently controlled heating zones. Technical Specifications Manufacturer: ElectroHeat Sweden AB Model / Project No.: 9457SH Lasdpfx Ahs Aayxzj Nsh Type: Conveyor Oven Year: 2023 Maximum temperature: 180°C Power supply: 3 x 400 V + N / 50 Hz Rated current: 50.56 A Internal dimensions: Width: 700 mm Height: 700 mm Length: 5,950 mm Maximum load: 300 kg evenly distributed on the conveyor Approximate weight: 2,800 kg Recommended compressed air supply: 5 bar CE marked Features 4 independently controlled temperature zones Automatic conveyor system HMI touchscreen control panel Integrated safety light barriers Pneumatic vertical doors Continuous production operation Suitable for industrial drying, curing, heating and thermal processing applications The oven is currently installed and can be inspected under power by appointment. Condition Very good used condition. Delivery Available immediately, subject to prior sale. Sold as seen and tested.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, KUKA KR 180 Series 2000 robot with a 3-meter process axis. Max. weight: 180 kg Max. reach: 2700 mm Max. payload: 180 kg Dimensions: 2700 mm Number of axes: 7 Year of manufacture: 2001 Scope of supply: Robot, controller, cables, teach pendant, wiring diagram. Used item – normal signs of wear. Further details, article numbers, and images available upon request. Two weeks start-up warranty. No further warranty. Spare parts are continuously available in stock. The robot is fully functional and can be inspected. Free loading / ex-works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on quantity, weight, and desired delivery conditions. Laodpoz Rl Udsfx Ah Neh Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: used, functionality: fully functional, power: 30 kW (40.79 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,320 °C, inner dimension length: 950 mm, inner dimension width: 500 mm, inner dimension height: 400 mm, overall weight: 900 kg, number of chambers: 1, Equipment: CE marking, documentation/manual, Electrically heated chamber furnace for hardening or preheating forged parts. The furnace is in excellent condition and has seen very little use. Maximum temperature: 1,320°C Power: 30 kW Heating power: 1 control zone, zone 1 = 30 kW Thermocouple: Type S with a diameter of 0.35 mm in the ceramic support tube Temperature control: JUMO dTron 304 controller Lajdpjz H I N Iefx Ah Nsh Usable dimensions: 950 x 400 x 500 mm (length x height x width)

Condition: used, Heck DVAS 180 Refrigeration System, 180 kW Professional, industrial refrigeration system from the premium manufacturer HECK Kältetechnik GmbH. The system is in very good condition for its age and has been reliably in operation until recently. Thanks to the modern refrigerant R513A, the system is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of construction: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for the efficient cooling of large halls or commercial spaces. Heating capacity: 290 kW – Highly efficient air heating through the intelligent use of waste heat from the cooling process. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Thanks to these combined performance characteristics, the system is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporating temperature: The system is designed for an evaporating temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g. cabin, cooling zone or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator highly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "Everything from a single source: We will be happy to offer you suitable bank financing for your project." Ljdezrlzzspfx Ah Neah More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration Laodpfx Ahsy Au Als Njh • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: good (used), mileage: 535,617 km, power: 132 kW (179.47 HP), first registration: 05/2014, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,200 mm, fuel: diesel, color: green, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, number of seats: 2, total length: 9,050 mm, total width: 2,550 mm, permissible axle load (axle 1): 4,400 kg, permissible axle load (axle 2): 8,400 kg, loading space length: 71,000 mm, loading space width: 24,700 mm, loading space height: 23,600 mm, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, spoiler, tail-lift, traction control, = Additional Options and Accessories = - Passenger seat - Roof spoiler - Euro 6 - Remote central locking - Air suspension - Front center armrest - Radio/CD player - Side door - Sun visor - Advertising (applied) - Partition = Additional Information = General Information Year of construction: 2014 License plate: 92-BDV-6 Technical Information Number of cylinders: 4 Engine displacement: 4,580 cc Front axle: Max. axle load: 4400 kg; Steered Rear axle: Dual tires; Max. axle load: 8400 kg Weights Unladen weight: 6,600 kg Payload: 5,390 kg GVW: 11,990 kg Functional Features Tail lift: D'HOLLANDA DHLM.20, tailgate, 1500 kg Pump: Yes Tipping mechanism: Rear Lsdpfx Ahez S T S Tj Njah Maintenance, History and Condition APK (Technical Inspection): valid until 06/2027 Technical condition: good Optical condition: good

Condition: excellent (used), Catalog number: 7649 TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs screen dimensions: 70x70mm from below, 2 toothed pulling shafts lower shaft motor: 7.5kW from above, 2 toothed pulling shafts upper shaft motor: 7.5kW belt conveyor apron feeder with chain belt 5600mm + 10600mm, 2.2kW feeder belt width: 800mm main motor: 90kW reverse gear overall machine dimensions (L/W/H): 3300x3100x1700mm shredder base dimensions: 3300x2080x1940mm feeder/apron feeder base dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm feeder belt base dimensions: 5100x1300x2520mm total weight approximately: 16000kg ADVANTAGES – German production – chain-type apron feeder, equipped with scrapers – reverse gear – DTR documentation – used shredder, very good condition Ljdpfxezrm T Se Ah Neah Net price: 209900 PLN Net price: 48800 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Year of construction: 2021, condition: like new (used), WeissTechnik ClimeEvent C/180/70a/3 climatic chamber – year 2021 – EXCELLENT CONDITION For sale: a professional WeissTechnik ClimeEvent C/180/70a/3 climatic chamber, manufactured in Germany in 2021. The unit is in excellent technical and visual condition. It has only been used a few times, so it shows minimal signs of wear. The chamber was purchased from an official Polish distributor and has been serviced regularly. Laodpfx Ahsz Tzvve Noh Key information: * Year of manufacture: 2021 * Used only a few times * Technical and visual condition: EXCELLENT * Unit is 100% functional * Regularly serviced * Purchased from an official distributor in Poland * German production – high quality and reliability Technical specifications: * Manufacturer: Weiss Technik * Series: ClimeEvent * Model: C/180/70a/3 * Year of manufacture: 2021 * Chamber volume: 180 liters * Temperature range: from -70°C to +180°C * Relative humidity control: typically from 10% to 98% RH * Rated current: 15 A * Rated power: 5.3 kW * Power supply: 3/N/PE AC 400 V * Country of manufacture: Germany Temperature and humidity control The WeissTechnik ClimeEvent climatic chamber enables precise environmental testing under controlled temperature and humidity conditions. The humidity control system allows for simulating various climatic conditions, including high-humidity environments, which makes it possible to test the resistance of materials, electronic components, and finished products. Possible applications: * Climatic and environmental testing * Resistance testing to high and low temperatures * Testing under high-humidity conditions * Material aging studies * Testing of electronic components * Quality control in industry * Laboratory and research & development (R&D) studies Condition of the unit The chamber has been used sporadically and is in excellent condition. It represents an attractive alternative to purchasing a new unit, offering professional research capabilities at a significantly lower cost. The unit is fully functional and ready for further use.

Year of construction: 1998, condition: used, Jointer table length: 2100mm, spindle speed: 6000rpm, tool diameter: 100mm, feed roller diameter: 120mm, finished dimensions: 20-180x5-120mm, spindle diameter: 30mm, feed speed: 8m/min, number of planer heads: 4, footprint: approx. 4.62m², length: 3350mm, width: 1380mm, height: 1500mm, weight: 1.57t, an on-site inspection is possible. Lodpo Adt Hmefx Ah Noah

Year of construction: 2021, condition: excellent (used), Pump LOWARA ECOCIRC XL 40-180 F Capacity: 8 liters/s. Ledpfxsz Nydwe Ah Njah Year of construction: 2021 - Rarely used Flanges DN40 Voltage: 230 V mono (see technical details on photos)