Used Herkules Roll Grinder for sale (6)

Condition: used, functionality: limited functionality, Year of construction: 2011, load capacity: 5,200 kg, fuel type: diesel, mast type: triplex, power: 116.9 kW (158.94 HP), motor manufacturer: Perkins, overall weight: 14,000 kg, empty load weight: 4,700 kg, total height: 1,800 mm, color: gold, Equipment: all wheel drive, cabin, cable winch, lighting, pallet forks, Hercules TD52180 Telescopic Handler Year of manufacture: 2011 Approx. 4,700 operating hours 14,000 kg 116.9 kW, 4-cylinder Perkins engine 4x4x4 steering Gsdps Ai Rhiofx Actjbw Continuously rotating upper carriage Radio remote control Work platform Fork Jib Winch Maximum lifting capacity: 5.2 t Lifting height up to 18 m, 2.5 t 16 m horizontal reach, then 0.85 t MAIN CIRCUIT BOARD DEFECTIVE!

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 70012002 0406, fuel type: gasoline, Herkules KM 1200 H sweeping machine with a 120 cm working width, sweeping brush, and snowplow. Suitable for cleaning courtyards and paths, as well as for winter maintenance. TECHNICAL DATA Manufacturer: Herkules / telsnig Model: KM 1200 H Year of manufacture: 2011 Engine: Honda GXV 160 Fuel: Gasoline Working width: 1,200 mm No operating hour meter available. SCOPE OF DELIVERY Sweeping machine with sweeping brush and snowplow, width 120 cm. Gsdpfjz Hcrdox Actjbw CONDITION Used machine in very good condition, according to available information. The engine runs smoothly and starts well, even when cold. Tires are in good condition; signs of wear can be seen in the photos. The carburetor was cleaned several years ago. Further maintenance work or oil changes are not documented; current maintenance is not guaranteed. LOCATION AND PICKUP 74376 Gemmrigheim, Germany. Inspection and pickup by arrangement. Price: 2,875 EUR net, negotiable, plus statutory value-added tax. Reference: RQ427302

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. Gbodpfx Asglaq Ijctsw 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, turning length: 5,000 mm, turning diameter: 1,550 mm, Turning diameter: 1,550 mm Gbodpfx Asx Sdqqoctew Distance between centers: 7,000 mm Faceplate: 0.63 to 63 rpm Max. workpiece weight: 50 t Machine weight: approx. 80 t

Condition: used, Year of construction: 2017, machine/vehicle number: 117119, Ref. no. 25158 Technical specifications: - Airflow approx. 220 m³/h - Dust class M - Connection nozzle: 50 mm - Drawer - Pneumatic connection Godpfxexay D Ho Actjbw - Drive power: 400 V / 1.3 kW - Required space: W 1000 x H 1350 x D 500 mm - Weight approx. 120 kg

Condition: used, turning diameter over bed 2400 mm turning diameter over slide rest 2200 mm turning length 10000 mm power capacity 185 kW faceplate diameter 1650 mm turning speeds 1,5 -150 U/min max. workpiece weight 70000 kg clamping diameter 1400 mm Technical data Working range Maximum turning diameter over support: 2200 mm Maximum swing diameter over bed: 2400 mm Maximum turning length: 10,000 mm Clamping diameter in the headstock faceplate: 300 - 1,600 mm with special jaws up to 2,050 mm Clamping diameter in the tailstock faceplate: 300 - 1,400 mm Maximum workpiece weight: 70000 kg Main drive, faceplate Faceplate diameter: 2000 mm Faceplate speeds, continuously adjustable in 4 stages: 1.5 - 150 rpm Maximum torque at rated speed: 220,000 Nm Drive power of main motor: 185 kW Flange centre point angle: 70° Supports Travel of the plunge slide: 500 mm Travel of the face slide: 1400 mm Quick adjustment, longitudinal: 2000 mm/min Quick adjustment, face: 800 mm/min Infinitely variable feed, longitudinal: 0.6 - 300 mm/min Infinitely variable feed, face: 0.3 - 120 mm/min Max. cutting force at support: 20,000 kg Tailstock Faceplate diameter (removable): 1650 mm Faceplate clamping diameter: 1400 mm Flange centre point angle: 70° Quick adjustment: 1250 mm/min Gbjdpfx Aoxddvnoctjw Special equipment Copying device for first support Copying length 8500 mm Max. copying depth in one pass 500 mm Boring device: Boring bar 460 x 390 mm Drilling diameter 600 - 1000 mm Maximum drilling depth in one pass 2700 mm At Ks of 200 kp/mm² - s max. = 1.5 mm/rev a = max. chip cross-section 30 mm² at a projection of 1000 mm Reduced chip cross-section with increasing drilling depth A guide ruler for cone turning, adjustment angle up to 8° and a maximum cone length (in one pass) of 2000 mm, adjustment accuracy ± 5 minutes. A guide ruler for cone turning, adjustment angle up to 15° and a maximum cone length (in one pass) of 1000 mm, adjustment accuracy ± 5 minutes. 125 kg auxiliary crane on spindle box.