Condition: like new (used), Various inserts for the Maweg gluing press. Psdpfofl Ikkex Agmopw Various dimensions, mostly unused. Made of laminated oak.

Condition: good (used), Obel Pedersen High-frequency continuous belt press Opel-Pedersen press, type 2412 Press length 2500 mm, width 600 mm with glue application system, stacking table, Ppodsdybr Repfx Agmsw HF generator T20 V and water cooling System has been dismantled.

Condition: excellent (used), Figure 1 provided by the manufacturer as an example. Remaining images are original. Manufacturer: Minda Designation: Timper Press V 200 Technical data: Main pressing force from below: Number of press chambers: 2 Maximum lamella width: 270 mm Maximum glue-laminated timber length: up to 18 m Glue-laminated timber profile: straight Lateral alignment of the lamellas: included Pressing system: hydraulic Permanent pressure control: included Psdjhtd E Aspfx Agmspw Packaging: separate Loading/unloading: in the longitudinal direction

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm Psdpfxjyhggrj Agmepw • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: excellent (used), Year of construction: 1993, machine/vehicle number: 221/93, functionality: fully functional, Connection value 380V 16A Pneumatic connection 6 bar Total length of the machine 4300 mm Total machine width 1300 mm maximum pressing length 2650 mm Psdpjk Tzwdjfx Agmspw Press width 1000 mm Press height 1000 mm Press pressure up to 150 bar electrical width adjustment with digital display Footswitch for pressing

Condition: not inspected (used), Year of construction: 1975, Power connection: 400V, 13kW 2 heating plates, each measuring 1200 x 2250 mm Podpfx Aokkflbjgmjpw Heating plates controlled by 2 thermostats Pressing pressure: 250 bar Dimensions (L x W x H): 2590 x 1330 x 1950 mm Weight: approximately 2800 kg Press stroke: 380 mm

Condition: reconditioned (used), functionality: fully functional, power: 9 kW (12.24 HP), Ott veneer press connected load 380V 9kW Panel size 2250 x 1350 mm Elkom heating plates, gold anodized Plates and hydraulics in order Pedpfx Agetwp Iwsmspw

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 370, total width: 2,500 mm, total height: 4,000 mm, total length: 7,000 mm, overall weight: 14,000 kg, type of input current: three-phase, space requirement width: 2,500 mm, space requirement length: 7,000 mm, space requirement height: 4,000 mm, input voltage: 380 V, oil tank capacity: 200 l, pressure: 300 bar, operating pressure: 250 bar, power: 37.51 kW (51.00 HP), year of last overhaul: 2023, noise level: 80 dB, Equipment: cooling unit, emergency stop, *Selling mobile wood briquetting system. *Press: Ruf RB440, output > 2 tons/hour. *Briquet dimensions: L 150 x W 80 x H 80 - 110 mm *Press completely overhauled, with all supporting documentation. *Truck with valid TÜV (technical inspection) until Jan. 2026, ready for use, also suitable for use in environmental zones / green license plate / tax-free!!! Classified as a self-propelled working machine. *PE packaging bags for approximately 90 tons, included. *Hydraulic pump Linde > New. *Gearbox discharge > New. *Suction fan motor 7.5 kW > New. *Complete hydraulic oil change with oil filter 200L > New. *Many spare parts available due to business closure. *Truck: MAN 14.232, 335,937 km, built in 1990. *Truck with new, reinforced flatbed body!! Manufacturer: Suhr. *TÜV > New. Psdswhw Syjpfx Agmspw *Tires, all 6 > New. *Brakes on front axle newly replaced. *Everything is sold with training provided. *If interested, please contact us by email.

Condition: good (used), Code: 0421 Brand: ORMAMACCHINE Model: NPC - CE Standard Pedpfx Agezgtpijmopw Hot press with diathermic oil heating for wood, joinery, furniture, custom-made furniture, panels, doors, composite materials and various – CE Standard Platen sizes mm 3000 x 1580 Solid steel platens with diathermic oil heating N° 6 pistons diameter 85 Opening mm 400 Platens heating by electric boiler Thrust 120 ton Guides side racks Mylar-coated platens Overall dimensions mm 3700 x 1850 x 2600 h

Condition: good (used), Year of construction: 1994, Max pressure space : L 1900 x H 1800 mm Incl. OBEL-P High Frequenz unit. Ppjdpfx Agszi Hpusmjw Chair seat bending : 3-4 min. pr cycle. Still connected to power. Can be examined in working condition. 1). 3D pressure can meet different shapes of plywood bending requirement and help customer develop more designs. 2). HF heating is dielectric heating. It heats products by friction of water melocules, fast, uniformly and effective 3). HF power is selective heating. It focus on glue heating but not heat the wood material, saving energy. 4). High quality. After pressing, plywood shape is steady and hard to change. 5). HF bending press can work with metal mold, plywood mold as well as MDF mold. There are more choice for end user. Customer can make mold themselves easily. 6). HF power needs only electricity, clean and dust free.

Year of construction: 2015, operating hours: 1,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: M15090L, For sale is a high-quality vacuum membrane press from Columbus Presstechnology. Type: Multimat Sonder Model: M15090L Year of manufacture: 2015 The machine is in good, well-maintained condition and is immediately ready for operation. Technical data: Voltage: 400 V / 50 Hz Power: 19 kW Psdpfx Aey I Uguogmspw Suction capacity: 40 m³/h Vacuum: up to -0.9 bar Temperature range: up to 140 °C Equipment / Condition: Fully functional and ready for use Robust industrial design Membrane included (used but functional condition) User-friendly controls Ideal for woodworking, furniture, or plastics processing Applications: Veneering Foil lamination Mold making / plastics processing Prototype production Inspection is possible – the machine is ready for use.

Condition: used, Year of construction: 2003, power: 250 kW (339.91 HP), CPM 7930-4 Pellet Mill High-capacity pellet production machine manufactured by CPM. Designed for processing wood, biomass, animal feed and other pelletizable materials into pellets. The machine has been used for only one season and is in very good technical condition. Equipped with: Electric motor: 250 kW Mixer Pjdszlgxbopfx Agmjpw Feed screw conveyor Complete set of rollers Die Manufacturer: CPM Model: 7930-4 Year of manufacture: 2003 A key machine for a complete pellet production line – ready for installation and operation.

Condition: ready for operation (used), Schöberl Gluing Stand can be moved on both sides 8 clamping elements, 4 per side 2 heating rails 2 pressure bars Condition: used Ppedpfjzlwpqjx Agmow Price: 1800

Condition: used, used good condition cleaned functionally tested partially refurbished Gluing stand Manufacturer: maweg double-sided Number of press cylinders: 11 Cylinder stroke mm approx.: 30 manually hydraulic mobile Working length mm approx.: 1900 Psdozkvzcjpfx Agmjpw Working height / clamping depth mm approx.: 1800 Max. material thickness approx. mm: 50 Space requirement approx. L x W x H mm: 2000x1100x2300 Weight approx. kg: 1000 Location: 97447 Gerolzhofen, free loading, unpacked Handover in its current condition, as inspected without warranty

Year of construction: 2023, condition: new, Technical data of the briquetting press: Throughput: 30-60 kg/h Podpfx Askuz Tuogmopw The briquetting performance refers to a bulk density of the raw material of 200 kg/m³! Motor power: 5.5 kW Briquet diameter: 50 mm Weight: approx. 680 kg 1680 x 1100 x 1500 mm Equipment: - Automatic start/stop of the briquetting press via rotary vane probe - Inspection cover - Transport tube holder for the briquetting press - Viewing window in the container Requirements for the raw material for briquetting: - The moisture content (dry basis) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The customer must ensure protection against hydraulic oil leakage - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result. The sieve of the shredder should not exceed a size of 10/12 mm.

Condition: used, Year of construction: 1978, used good condition cleaned Ppjdpfozkl Ifex Agmsw functionality tested Manufacturer: Bürkle Type: U 88 Year of manufacture: 1978 Machine no.: 3102629 Safety tested (GS certified) Touch control Safety cable on top Electric heating Specific maximum pressing force: 80 t Aluminum plates glued Lower piston Quantity: 6 Plate size approx. mm: 2550 x 1300 Opening width approx. mm: 400 Piston diameter: 70 Space requirement approx. L x W x H approx. mm: 3100 x 1500 x 1900 Weight approx. kg: 4000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: good (used), Year of construction: 2011, Condition: used, in working condition The robust frame construction and press beams ensure precise frame assembly and gluing. The press guarantees accurate squareness while preventing frame distortion or warping. Thanks to the long stroke of the hydraulic cylinders, the lower beam and the clamping jaws require less frequent adjustment. The lower beam features automatic lifting and locking. Technical Specifications Psdozlyv Tspfx Agmspw • Maximum frame size: 3000 × 2000 mm • Minimum frame size: 250 × 340 mm • Hydraulic pump power: 3 kW • Maximum total pressing force on the horizontal and vertical beams: 19 tonnes • Vertical hydraulic cylinder stroke: 1100 mm • Horizontal hydraulic cylinder stroke: 1200 mm • Lower beam adjustable to three heights: 380, 680 and 980 mm • Adjustable vertical and horizontal pressing pressure • Two horizontal fences with quick-adjustment system • Horizontal and vertical movements are controlled by lever-operated valves mounted on the machine frame • CE-compliant design • Pendant push-button control unit Specifications are provided for information only. This machine is offered for sale on behalf of a customer. Viewing is available by prior arrangement. Please contact us through the platform's messaging system for further information and the relevant technical contact details.

Condition: like new (used), shelf length: 3000 mm shelf width: 1300 mm clearance between shelves: 30 cm water heating system 6 hydraulic cylinders Ppodpfxezlgm Ss Agmow safety shear pin

Condition: like new (used), Year of construction: 2020, operating hours: 395 h, functionality: fully functional, machine/vehicle number: 980-416, total width: 2,098 mm, total height: 1,405 mm, total length: 2,316 mm, briquette diameter: 80 mm, overall weight: 1,800 kg, type of input current: three-phase, input current: 28 A, input frequency: 50 Hz, input voltage: 400 V, oil tank capacity: 250 l, Equipment: cooling unit, emergency stop, WEIMA TH 814 Briquette Press! Top condition! Like new! Available immediately! Private sale (no VAT can be declared)! Operating hours: only approx. 400 hours The WEIMA TH 814 is a robust hydraulic briquetting press for industrial applications. It processes wood and biomass waste into highly compressed cylindrical briquettes with a diameter of 80 mm. The machine is designed for reliable continuous operation and offers high energy efficiency as well as a compact design for easy integration into existing plants. Model: WEIMA TH 814 Briquette diameter: 80 mm Applications: Wood, biomass, paper, plastic waste Year of manufacture: 2020 Throughput rate: up to approx. 180 kg/h Hydraulic motor: 11 kW Hydraulic system: automatic operation, suitable for continuous duty Weight: approx. 1,800 kg Dimensions (L × W × H): approx. 2,098 × 2,316 × 1,405 mm Ppjdsy Af T Ijpfx Agmew Hydraulic oil capacity: approx. 250 liters Feed hopper: approx. 1,400 × 1,400 mm Briquette length is adjustable and can be regulated via the feed auger's speed. Depending on the feed material rate into the pressing chamber, the briquette length will vary. The control is managed by a time relay in the control cabinet, which determines the running time of the feed auger's motor. The machine has seen little use and is in very well-maintained condition. Sale due to underutilization. Trial run on-site possible. Loading on-site possible. Original operating manual (Hungarian) available. A German version can be provided by the supplier if needed. The integrated hydraulic system is equipped with automatic oil preheating and oil-cooling function. This ensures an optimal temperature range of the hydraulic oil, even at low ambient temperatures or during continuous operation. This allows reliable 24/7 continuous operation of the machine. The price is set fairly considering the condition and very low operating hours. Inspections can be arranged at short notice by appointment. If interested, I look forward to your message.

Condition: used, Used Italpresse UT/6 hot press for surface finishing by applying veneers to chipboard, plywood, MDF, solid wood, or plastic laminates, also suitable for aluminum and other metals. The press platens are solid plates made of perforated steel. Platen dimensions: 3000 x 1300 mm. Ppodpszkt Tisfx Agmow Maximum opening: 400 mm. Platen heating is achieved with heat transfer oil and an electric boiler, complete with a circulation pump. Boiler: 27 kW - 380 V. Selector switch for using 50% of the boiler's power (13.5 kW in 1st position) or 27 kW in 2nd position. Pressing time can be set with automatic opening. Maximum pressure: 300 bar. Option to exclude 2 lateral cylinders from the control panel. Protective Mylar film on the platens. Machine dimensions: 3700 x 1700 x H. 2100 mm. Weight: 6600 kg. Machine complies with CE standards.

Condition: used, Year of construction: 1986, Colour: Green Price: On request Feed through press Wemhoner VOF2-400-2 Serial number 13350686 Maximum press dimensions 1500x4400mm Maximum stroke 150mm Press pressure 400T 7.5kW, 380V 10 cylinders diameter 120mm Solid plates aluminum 90mm Top and heated, oil boiler included. With infeed and outfeed conveyor. Transport dimensions: Full normal trailer 13000x2400x2400mm, total weight 25,000kg. - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 13350686 - Main motor power [kW]: 7.5 - Press drive: Hydraulic - Max. workpiece length [mm]: 4400 - Max. workpiece width [mm]: 1500 - Max. workpiece height [mm]: 120 - Total stroke [mm]: 150 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 10 - Cylinder diameter [mm]: 130 - Total working pressure [ton]: 400 - Heating boiler present: Yes - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Psdpfx Agowng S Aomopw

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Pjdjt Eq E Sjpfx Agmopw Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: used, high-frequency press line equipped with a motorized infeed roller conveyor, high-frequency press, and output conveyor. Psdpfx Ajzhrdbogmopw

Condition: good (used), Year of construction: 1992, SCHROEDER mosaic press 160mm. Pedpor Iyrmefx Agmopw Bonding patterns: line: - square plate 640x320 mm - parallel parallel plate 640x320 mm

Condition: good (used), Year of construction: 1999, The maximum working area is 3000 x 1600mm Minimum working area 390 x 420mm 2.2kW engine Weight 1500 kg Podeg Np Raepfx Agmopw