Used Briquetting presses for sale (75)

Condition: new, Year of construction: 2024, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Bhm2D8Ztcp Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: used, Year of construction: 2004, Total width: 1,800 mm, Total height: 2,400 mm, Total length: 2,450 mm, Briquette diameter: 70 mm, Overall weight: 2,000 kg, Power: 7.5 kW (10.20 HP), No. 04399 Briquetting press Reinbold RB 160 Used, year of construction 2004 Briquette diameter: 70 mm Capacity (depending on material): 100 - 150 kg/h Motor power: 7.5 kW Chrome-plated tongs Automatic operation with level switch or manual operation Briquette length control Including silo approx. 2000 x 2000 x 900 mm LWH, with agitator and discharge screw Siemens Simatic S7-200 control system Oil cooling for continuous operation and magnetic oil switch Technical documentation available Transport dimensions approx. 2450 x 1800 x 2400 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Bk8Onbjrsbq Sold as is Technical data, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse or location

Condition: new, Sale from stock - New - Briquetting press GP Genius I/40 Briquette diameter: 40 mm Pressing capacity: material-dependent Hopper opening: 900 x 900 mm Hopper height: 1025 mm Hopper capacity standard: approx. 0.6 m³ Motor power: 4.10 kW Connected load: 400 V /- 5% / 50 Hz Control cabinet: electronically controlled via PLC Hydraulic unit: with approx. 50 l tank for hydraulic oil Paint finish: RAL 7016 5017 Overall dimensions: L = 1,600 mm, W = 1,250 mm,H = 1,300 mm Weight: approx. 550 kg omatic briquette length control, automatic adjustment of length depending on material density - gear motor with screw conveyor for screw pre-compaction - permanent agitator - connection part for transport tube - chrome-plated tongs - manual control of all cylinders - automatic end position of all cylinders - safety switch for oil temperature - automatic switch-off in the event of bridging in the container and interruption of the pressing cycle due to foreign bodies - CE-compliant - automatic ON/OFF rotary encoder - oil temperature switch - automatic switch-off in the event of bridging in the container and interruption of the pressing cycle due to foreign bodies - CE-compliant - automatic ON/OFF rotary encoder ON/OFF - Oil temperature monitor - 2 transport pipe bends 90°, radius 500 No. 001 003 100024 Cfj8Kjm30J

Condition: ready for operation (used), Year of construction: 2019, Briquetting press Manufactured by Weima Type TH 800 S Year of construction 11/2019 Briquette press for highly compressed round briquettes. Control cabinet with Siemens Simatic PLC control Main motor 22 kW Pressure: 250 bar Voltage: 400 V, 50 Hz Current 55 A Fuse protection 63 A Qycxe8F3 Weight approx. 3000 kg

Year of construction: 2008, Condition: good (used), Briquetting machine 18kw Works very well Bqgfpw0Tw8

Condition: excellent (used), Year of construction: 2016, Briquette press GROSS GP200 Year 2016 - Briquette press with a bagging system with its own control system Technical data: GP 200 Briquette Ø (mm): 80 Throughput capacity (approx. kg/h): 150 - 200 Hydraulic motor (kW): 11 Weight (approx. kg): 1,200 Oil quantity (approx. l): 250 We can also offer magnetic separators Operating instructions Can be tested under power at our premises. Forklift available for loading Cvveikfwiw Delivery possible by arrangement.

Condition: good (used), Year of construction: 2019, Used machine with 1,070 operating hours Your special price 39.750 € net Dpp9Ab Including cooling unit (used) Throughput capacity: up to a maximum of 350 kg/h (depending on material) *Depending on the bulk density *based on a bulk weight of 250 kg per cubic meter Briquette diameter: 70 mm Storage container approx. 1 m³ capacity Hydraulic pre-compressor Hydraulic unit with 600 liter oil tank Pump 1: 18.5 kw / 120 liters Pump 2: 7.5 kw / 60 liters Agitator discharge: 1.5 kw Dimensions: approx. 2500x1500x1730mm lxwxh Weight: approx. 2300 KG CE compliant Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6% and a maximum of 15% - Maximum chip length 15 mm - Installation temperature: tempered room at a minimum of +5°C - The customer must protect himself against loss of hydraulic oil - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: excellent (used), Year of construction: 2015, Operating hours: 1,600 h, Machine/vehicle number: WP 700/1200, Hello, On offer industrial mobile plant for the production of pellets from straw and also other types of biomass including: - pellets / mulch - pellets / for feed from cereals, alfalfa, hay and others - pellets / wood sawdust Line used on the farm only 1600h All equipment mounted and integrated on two platforms suitable for transport by hooklift truck, truck trailer or on a farm trailer. Transport and set up of the platforms is very convenient, and it takes a few minutes to connect and start the line. The line controlled by two portable PLC control panels. Inverters taking data from sensors manage the process, so operator control is kept to a minimum. Gfpqes0Kp The line is built with the highest quality components such as: - 2 x granulator drives SEW eurodrive (Germany) - 8 x other NORD (Germany) drives - 12 x Yaskawa (Japan) inverters - other electrics Moeller, Array, Eaton, Siemens The set includes: - feeding table 0,37 kw - rotary drum 0,37 kw - shredder 30 kw - flail mill 26 kw - mixer 6,6 kw - 1 granulator 37 kw - 2 granulator 37 kw - 1 feeder 0,37 kw - 2 feeders 0,37 kw - electrical cabinet - transport platform 2 pcs - technical and propulsory documentation CE Total power of the equipment 138kw Weight of the set about 12 tons The granulators have two types of dies with a diameter of 680mm. One granulator with a die producing pellets of 6mm diameter, the other with a die producing pellets of 16mm diameter. The head and die sets can be freely configured from 3mm to 16mm. Our company also provides: - theoretical as well as practical consulting in the field of pellet production technology - optimization of productivity in relation to energy consumption through the use of appropriate control - modernization and overhaul of production lines - production of dies and subassemblies for granulators and line components Upon agreement, the possibility of adapting the line and the use of dies for any granulated raw material. True efficiency 800-1300kg/h Line in perfect condition, ready to work We provide our customers with on-site operation training, as well as support during machine operation. Price to be negotiated

Condition: excellent (used), Functionality: fully functional, Total width: 2,438 mm, Total height: 4,500 mm, Total length: 12,192 mm, Briquette diameter: 65 mm, Overall weight: 6,000 kg, Input voltage: 400 V, Power: 50 kW (67.98 HP), Year of last overhaul: 2023, Equipment: Cooling Unit, Emergency Stop, On offer is a briquetting press from the German manufacturer Mütek. This is integrated in a 40ft container and is therefore very mobile. Only a paved surface and a power connection are required for operation. A 6 cubic meter silo is mounted on the container roof as an intermediate buffer. This can be easily removed for transportation. The raw material must be fed into this silo. Dpq7Qj The press produces 750 kg of briquettes per hour, depending on the quality of the raw material. These have a diameter of 65 mm. The length of the briquettes can be infinitely adjusted using the integrated cutting device. A temperature control unit is also installed in the container, which keeps the press at a constant optimum operating temperature. This ensures that the briquette quality remains constant regardless of the ambient temperature. The raw material feed includes a loosening system that loosens the raw material and crushes material lumps to ensure a continuous material flow. The press was overhauled by the manufacturer in 2023 and has only been in operation very little since then. The press and the pressing tools are therefore in good condition.

Condition: used, Type: SHB 100 Year of construction: 1991 Condition: function-tested, very good, used - Filter system with storage container - Footprint 2200 x 2200 x 5000 mm - Briquetting press underneath - 2 fans 4 kW - Return air ducting The machine is located in a carpentry shop to be dissolved, is connected and can be inspected on site by appointment! Cr0Y9Lj9G8

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Dpeynl Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Condition: excellent (used), Catalog No. 6853 TECHNICAL DATA - hydraulic clamping force - round briquette form - briquette diameter 65mm - dimensions of the tank height / width 770x940mm - sensor of the minimum level of trout in the hopper - automatic or manual operation of the machine - inspection window in the machine chute - pump motor 7.5 kW - agitator motor 0.35 kW - 2 types of screw speed 1100, 1700 rpm - screw motor 0.75 kW - dimensions length/width/height 2050x1650x1640mm - weight 895 kg ADVANTAGES – unpainted – German production – used briquetting machine - very good condition Net price: PLN 31900 Net price: 7250 EUR Net price calculated according to the exchange rate of 4.4 PLN/EUR (with larger exchange rate fluctuations, the price may change) Ehh0K27

Condition: as good as new (ex-display), Year of construction: 2023, Machine planned to be ready in CW 48 Very robust machine with high pressing force - is also suitable for producing a salable briquette quality * depending on the material. The large press cylinder and the 80 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for cooling unit + € 4.995 net, (can also be retrofitted later) * cools the pressing tongs (important from 3.5 hours) and the hydraulic oil * Cooling device recommended for regular use of more than 3.5 hours at a time. Briquette diameter: 80 mm Front bush: 125 mm Briquette stroke max .: 100 mm Briquette lift opt ​​.: 80 mm Sigba0Id Output (depending on material): up to 220 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter Motor power: 9.2 kW 400 volts / 50 Hz / 3 phases Length: 2095 mm Width: 1300 mm Height: 1700 mm Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo content: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling pressing tongs option: yes, with special accessory coolable pressing tongs Hydraulic oil cooling option: yes Cooling of the pressing tongs and the hydraulic oil with cooling device (special accessory) Level monitoring option: yes Strand briquette option; yes (depending on material) Option of enlarged filling slide: yes, with special accessory enlarged filling slide CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: new, Year of construction: 2023, Capacity:50-60 kg/h Yk9Amipm Diameter of the briquets:50 mm Motor output:5,5 kW

Condition: good (used), Year of construction: 2012, Functionality: fully functional, BRIQUETTING and PELLETING technology: Machine type: BS70 Briquetting equipment The BS70 type BRIQUETTING PRESS equipment can be versatilely used for the processing of naturally renewable raw materials for the production of new, processed commercial goods. The equipment is used for processing and pressing materials such as straw, legumes, hay, paper, wood and other natural materials and their mixtures. The manufacturer designs the equipment according to the product to be processed. The moisture content of the raw materials to be processed is max. 10-12% and must not contain foreign matter (metal, gravel, sand, etc.). Pressing takes place without the addition of any additives or binders, only as a result of pressing, during which (depending on the base material) a density of over 1 kg/dm3 can be achieved. The resulting end product is automatically placed in the storage bags without manual handling, suitable for continuous operation. This can be ensured with 4 briquette presses (briquette diameter 70 mm) and 1 pelletizing machine (pellet diameter 6 mm), which can be installed in a 15x20x6.3 meter hall. The equipment is suitable for 16 hours of work per day, with 2 x 7 hours of continuous operation within that. Dpm0Hb The system consists of the following units: KSD900 Straw Grinder (2 Pcs): AVSZ70 Automatic control for material preparation (2 Pcs): Screw conveyors (3Pcs): Trough screw conveyor (2Pcs): CSV70 Pipeline (2Pcs): PFK70 Dust selection and dust filter (1 Pc): PF70 Dust filter (1Pc): ST70 Silo tank (6 m³) (2 Pcs): BS70 Briquette press (4 Pcs): The press piston presses the material into a conical tube, which creates a continuous rod with a diameter of 70 mm. The pressure is adjustable and the feed of the conveyor screw can be controlled in the same way. The exchangeability of the press tools enables the control of the quality and density of the manufactured briquettes. As an option for the various raw materials, we deliver various press scopes, which undergo testing before delivery, if the customer provides a raw material sample. By changing the press tool, the machine is also suitable for the production of litter and loose briquetting of feed, or even for making a mixture as an option. The material is pressed without binders or chemical additives. Depending on the density of the processed material, we obtain different products, the specific gravity of which can exceed 1 kg/dm3. The performance of the pelletizing and briquetting system is 1.5 tons/hour based on wheat straw. The performance of the production and the quality of the product are determined by the adjustable speed of the screw and the adjustable press pressure depending on the quality of the raw material. Electricity Demand 37+10 kW. Press pipe (4Pcs): Ribbed conveyor belt (1Pc) HF70 Cooling-heating operating temperature controller (4Pc): AVP70 Control (4Pcs): PELLETING technology for biomass: The manufactured finished product is a 6 mm pellet, 10-40 mm long. Raw material to be processed: hay, straws. Moisture content: max. 10%. To produce the pellets, the technology incl.:pre-shredding (drying), grinding, dosing unit ,moistening, pelletizing equipment, cooling system, screen, filter and a pellet bagger (manual) The type of the machine: MiniPell (1Pc) machine performance: 50-120 kg/hour press engine: 10 kW dosing unit: 0,37 kW weight: 750 kg Grinder (1Pc): Control grid and Manual bagger (1Pc)

Condition: good (used), Year of construction: 1992, Functionality: fully functional, WEIMA TH 400 briquetting machine - after technical overhaul - Made in Germany - very good condition - year of manufacture 1992 TECHNICAL PARAMETERS: power of main engine 7.5 kW machine output approx. 80 kg/h briquette diameter 50 mm feeding dimension 2000 x 1800 mm adder feeding the material to the piston stirrer machine overall dimensions (length / width / height) 240 / 190 / 200 cm weight ~ 850 kg TH hydraulic briquetting machines are compact equipment for briquette production. Briquetting machines can be filled manually or automatically directly into the hopper. The units of this series, by their small size and quiet operation, are ideal for setting up on the production floor. Characteristics: - reduction of production waste volume - low purchase costs - low energy consumption - compact design takes up little space - excellent processing quality - durable construction and long service life - trouble-free maintenance and low consumption - simple operation Dplqx2 The main application scopes of briquetting presses are, for example: - in combination with a dust extraction or filtration and dedusting plant - for manual feeding of material - as a whole combined with a chipper (e.g. WEIMA WL4) - with a screw feeder or conveyor belt - with a mobile dust extraction system or combustion furnace

Condition: ready for operation (used), Year of construction: 1989, Functionality: fully functional, Machine/vehicle number: 689/89, Total width: 2,300 mm, Total height: 3,500 mm, Total length: 3,200 mm, Spänex filter system with integrated SHB 50 briquetting press Consisting of 80 filter bags, 3m³ chip container with discharge, B3Hremmvyy Pipe connections: 250 and 300 mm, automatic shaking, volume flow monitoring, control, air recirculation

Condition: excellent (used), CATALOG NO. 7153 TECHNICAL DATA - hydraulic pressing force - round briquette form - briquette diameter 70mm - tank dimensions height/width 920x870mm - capacity about 110 kg/h - automatic machine operation - oil cooler - heating the oil - inspection window - 7.5kW motor - dimensions length/width/height 1750x1300x1460mm - weight 825 kg ADVANTAGES – unpainted – Italian production – used briquetting press - very good condition Huyu2Bk Net price: PLN 45900 Net price: EUR 10432 depending on the price of EUR 4.4 (Prices may vary with higher fluctuations)

Condition: new, Year of construction: 2024, ready produced Our best-selling briquetting press, the classic. + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Options for an extra charge: * Surcharge for the level indicator that enables automatic operation + € 995 net * Surcharge for large pre-compression chamber + 980 € (recommended for light material like straw) Briquette diameter: 50 mm Front bush: 50 mm Briquette stroke max .: 40 mm Briquette lift opt ​​.: 40 mm Throughput (depending on material): 30-60 kg / h * * depending on the bulk weight * based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 volts / 50 Hz / 3 phases Length: 1680 mm Width: 1100 mm Height: 1500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo content: approx. 0.7 square meters Pump: 27 liters Bst09Lehrk Hydraulic pre-compressor Option cooling pressing tongs: no Hydraulic oil cooling option: yes Level monitoring option: yes CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18% - Maximum chip length 15 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The customer must insure himself against loss of hydraulic oil - The loading must be free of metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: used, Year of construction: 2022, Operating hours: 235 h, Functionality: fully functional, Machine/vehicle number: 3300, Model/ Type: RUF LIGNUM R2 Ma.No. / Ma.No.: 3300 Year of construction: 2022 Drive motor: 22 kW Throughput capacity up to max.: 490 kg/h (depending on material) Press pressure: approx. 1700 kg/cm² Briquette size: 150x60mm Dpi7Wb Operating hours / running hours: approx. 235 hrs. approx. 235 h Warranty: 12 months after delivery 12 months after delivery Verfügbarkeit/ Availability: approx. 8 weeks after receipt of down payment approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + Hopper extension with grid / Hopper extension with grid (extra cost) + Saugbecher / Suction cups + Stempel mit RUF Logo / Press piston with RUF logo

Condition: excellent (used), Functionality: fully functional, Briquette diameter: 75 mm, BOGMA" BRIQUETTING MACHINE-PRESS for the production of Cylindrical Briquettes of Diameter 75 mm and Length on demand. With cooling line. In very good condition. Bmfqjq2Zcgd Location: 39430 Cantabria (Spain) 1 Machine + Cooling Line: 45.000 €. Availability 2 - 3 Machines (Complete Briquetting Plant): Price of the Plant, negotiable.

Condition: new, - Leistung max. 450 kg/h - Motor 33 kW / 400 V, 50 Hz - Spänekompression min. 1000 kg/cm2                                   max.1700 kg/cm2 - Holzfeuchtigkeit max.14 % Brikettabmessungen: - Länge 150 mm I2Xn3Lz9Q - Breite 60 mm - Höhe 40-105 mm - Abmessungen LxBxH 1800x1800x1900 mm - Gewicht 3000 kg inklusiv: - Frequenzumformer - SIEMENS Steuerung - Verpackungsstation bestehend aus Zuführbahn der Briketts - Verpackungstisch mit Kipplade - Folieschweißmaschine

Condition: as good as new (ex-display), Year of construction: 2024, Briquette Diameter: 40 mm Bsjgkstz8U Power: 4,1 kW Press Output per hour: 30 kg/h depended on material Hopper opening: 900 x 900mm Controlled by PLC Hydraulic tank: 50l New exhibition machine with 5 operating hours

Condition: new, Year of construction: 2024, Weima Briquetting Press TH 714 The TH 714 machines are designed for plants with required throughput rates of up to 150 kg/h. The stable press housing enables the production of high-strength briquettes - from materials such as wood, polystyrene, foams, light metals, paper or biomass. Numerous additional options can be implemented, e.g. oil cooling for multi-shift operation. All machines are available as left- or right-hand version. Mounting on a stable base frame ensures fast installation and makes mobile use possible. User-friendly operation thanks to Siemens PLC control In order to live up to our performance promise, we design and produce all control cabinets ourselves at our Ilsfeld site and equip them with well-known international components. This guarantees highest quality with compact design. The used PLC-control from Siemens is perfectly adapted to the requirements of the briquetting process. Impurity-resistant screw conveyor due to cardanic suspension The screw conveyor, which transports the material into the pre-compressor of the briquetting press, is suspended on a cardan joint. This prevents interfering materials from causing damage to the screw conveyor. As is so often the case, however, it always depends on the specific application which suspension is chosen. For metal applications, for example, we often recommend rigidly mounted screws. Briquette diameter (mm): 70 Throughput capacity up to (kg/h): 150*1 Cfvr7Npzjf Hydraulic motor (kW): 11 Oil quantity (liters): 250 Weight (approx. kg): 1100 Location: Ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: new, Year of construction: 2024, Completion: approx. week 40 Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 70 mm briquette make this possible. Our best-selling briquetting press series Beyiwm8Wjh + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Top price-performance ratio Surcharge for demonstration cooling unit + 4,980 € net, (can also be retrofitted at a later date) * Cools the press tongs (important from 4 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 4 hours at a time. Product code: 84793010, Briquette diameter: 70 mm, Front bush: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (depending on material): up to 150 kg/h* *depending on bulk weight, *based on a bulk weight of 200 kg per cubic meter. . Motor power: 9.2 kW, 400 Volt / 50 Hz / 3-phase, Length: 2095 mm, width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 qbm Pump: 75 liters Hydraulic pre-compressor Cooling press tongs option: yes, with optional cooling press tongs Hydraulic oil cooling option: yes Cooling of the press tongs and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Briquette option; yes (depending on material) Enlarged filling slide option: yes, with special accessory Enlarged filling slide CE compliant Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Maximum chip length 20 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result