Used Carcase presses for sale (31)

Condition: as good as new (ex-display), Year of construction: 2024, Technical data: Slat carcass press from our showroom; Working range: width from 150 - 2.550mm, height from 150 - 1.400mm; depth from 150 - 700mm; Variable pressing force adjustment 300/700/1100/1400/1800/2200 dN(kg) of the lateral pressing beam; Variable pressing force adjustment 500/800/1200/1500/1900/2200 dN(kg) of the upper pressing bar Simple operation via 6 separate push buttons, Freely adjustable pressing time preselection with automatic opening, Charging height 300 mm Ncelhcsb Eln Dodw Ijr Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg

Condition: excellent (used), Year of construction: 1997, Clamping machine Italpresse model SP 30-8 year 1997 S/N 978612997 Nelhshwwnrecdw Ijcr working lenght approx. 3000mm working width 600mm working height min-max 450 - 1250mm 12 pcs supports 8 pcs pneumatic pressure cylinder Dimensions L x W x H = 3,5m x 0,8m x 2,24 m 1150 Kg technical information under subject of correction

Condition: excellent (used), Year of construction: 2006, Ligmatech MPH 400/08 Cabinet Press Year of manufacture 2006 Machine specifications for cabinets with Length: 250-2500 mm Ncslhcdowaikrow Ier Width: 250-700 mm Height: 150-1400 mm Pressure: 14 kN Positioning speed: 25 mm/s Working height: 300 mm Space requirement: 4000 x 750 x 2300 mm Weight: 2200 kg

Condition: new, Year of construction: 2025, Functionality: fully functional, Gannomat Concept 70 Eco body press Year of manufacture 2025 including the following options: - Rapid traverse speed adjustment speed up to 50 mm/sec - Machine feet (working height 500mm) The Concept Eco and Concept Primus are ideal assembly aids for dowel connections when pressing bodies together, as well as when making drawers. Brief introduction: • With tried and tested tolerance compensation (GANNOMAT system) • 2 potentiometers for continuously adjustable pressing force • Pressing force min. 300/500 daN (kg) for Concept Eco or Pressing force min. 600/800 daN (kg) for Concept Primus • Pressing force max. 2200 daN (kg) for Concept Eco or Pressing force max. 3500 daN (kg) for Concept Primus • 3 pressing and adjustment speeds 5/10/25 mm/sec. (with fine positioning / creep speed) • Freely adjustable pressing time pre-selection with automatic opening • Concept Eco: Simple operation via 6 separate push buttons for 8 movement sequences • Concept Primus: Simple operation via LCD display Universal application area: • Bodies e.g. for furniture and cabinets • Mitered bodies • Bodies with protruding lids • Drawers • Pressing several bodies / drawers Advantages: • Tried and tested tolerance compensation (GANNOMAT system) • Electromechanical body press with frequency-controlled gear motors • Independent vertical and horizontal press beam • Long service life thanks to tried and tested, high-quality components • Solid and robust construction Ncelhcdovxgrrew Ijr • Space-saving design • Body pressing = Simple + Fast + Efficient + Flexible + Precise + Professional • Simple thanks to simple and practical control panel • Fast thanks to press beam positioning speed of up to 50 mm/sec (option) • Efficient thanks to precise pressing of a wide variety of body sizes • Flexible thanks to adjustable parameters such as e.g. Pressing force, pressing time, travel speeds • Precise through precise angle pressing of furniture bodies and drawers • Professional production of bodies and drawers using modern body presses

Condition: like new (used), Year of construction: 2018, operating hours: 650 h, Functionality: fully functional, input voltage: 380 V, overall weight: 1,400 kg, workpiece height (max.): 1,220 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 750 mm, BONACIN KORPUSPERS Year of construction 2018 Weight 1400 Kg Cycle. 650 (Perfect new condition) New price 47,000 eur Demo possible Max. dimensions Length. 2500mm Depth 650mm Height 1220mm Fully automatic program, everything adjustable manual operation Ncolhcdewcg Iyow Ior

Condition: good (used), Code: 0024 Brand: ITALPRESSE Model: NUOVO/SP Quick setting semiautomatic case clamp Technical data Manual loading Max useful dimensions mm 2500 x 600 x 1250 Min useful dimensions mm 250 x 600 x 280 Motorized horizontal cross-beam with display Nolevv Ul Uehcdw Iecr Vertical beam setting N° 6 vertical cylinders N° 6 horizontal cylinders Cylinders stroke mm 70 Cross-beam stroke mm 920 Installed power Kw 0,55 Overall dimensions mm 3600 x 800 x 2550 h Weight kg 1400

Year of construction: 2023, Condition: new, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Nolhcdjiidm Nsw Iecr Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Location: ex stock 54634 Bitburg - immediately available -

Condition: reconditioned (used), Year of construction: 1995, Pressing force [dN, kg] 650 - 3500 Nolhcdwjvgypyo Iocr Maximum usable size [mm] 2500 x 1400 x 700 Minimum usable size [mm] 150 x 150 x 150 Travel speed [mm/sec.] 25 / 50 Working height [mm] 350 Total weight [kg] 2600 Connected load [kW] 5 Rated current at 400 V / 50 Hz [A] 10 Space requirement (l x w x h) [mm] 4600 x 850 x 2350 Drive via 4 ball screws Synchronous pressing process via proximity switch Manual control via control switch for 8 movement functions Independent pressure adjustment of horizontal and vertical pressing pressure Pressing force infinitely adjustable from 650 to 3500 kg per pressure wall Automatic opening Safety rip cord Machine feet CE Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 1992, Storage location: Nattheim Nolhovvkl Docdw Iscr

Condition: used, Functionality: fully functional, Year of construction: 1976, - Usable size 2500 x 1500 x 700 mm - Various vertical and horizontal pressure elements - Max. 800 dN (kg) per pressure element - Drive: 2 electric motors, 0.75 kW each Njlhcdwjv Uac Ns Iocr - Weight: 1600 kg - Space required: 3500 x 800 x 2420 mm (L x W x H) - Operating instructions included ATTENTION: No programmable control - brochure does not exactly match the machine All information is provided without guarantee, sold as seen.

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0243 / 25634, total height: 2,600 mm, total length: 100,000 mm, total width: 1,000 mm, pressing force: 120 t, Ocmac automatic throughfeed carcass press KOPR CC-EL Manufacturer OCMAC s.p.a. Italy ( acimall) S/N 0243 / 25634 year of construction 1995 Njlhoqai H Tecdw Iecr Hydraulic self-adjusting electronic carcase press for the assembly of furniture. Automatic feeding of the workpieces Technical data: Max. usable mass: Length 2300mm width 600mm Height 1500mm Min usable dimensions: Length 500mm Width 300mm Height 200mm Feed rate of the conveyor belt: 2,4-12M/min Closing time of the press 20-40 seconds Installed power 11.5 kW Max pressure: 120 bar Voltage: 380 V , 50 hz Net weight 4500 kg

Condition: excellent (used), Through-feed System (of the furniture cabinets) Mechanical pressing system (with asynchronous motors + inverter) Self-centering system Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) mm 4500 Adjustable feeding speed (m/min ) 10-40 Total lenght of the Press Clamp (mm) 4500 Movable vertical pusher and Movable horizontal pusher SIZE of FURNITURE CABINETS: Minimum lenght of the furniture cabinet (mm) 250 Maximum lenght of the furniture cabinet (mm) 2500 Nolhcdwogz Acae Iocr Minimum depth (Width) of the furniture cabinet (mm) 200 Maximum depth (Width) of the furniture cabinet (mm) 700 Minimun height of the furniture cabinet (mm) 250 Maximum height of the furniture cabinet (mm) 1200 Motorized in-feed carpet to the Press Clamp Length of the carpet in feeding to the Press Clamp (mm) 2500 Electronic programmer PLC (Separate electric and command cabinet) Total installed power (Kw) 7 Stapling Gun E/S 250 (Automatic)

Condition: excellent (used), Ramarch Soldid-124CE Vertical Press Gluing length 4500mm Gluing height 1650mm Nslhcdevw Uwasw Ijcr Number of vertical clamps 12 (hydraulic) Number of front clamps 6 (pneumatic) Foot width 80mm CE certificate Dimensions: 460x90x227cmH

Condition: used, Year of construction: 2016, Functionality: fully functional, 2016 Gannomat Concept 70 Eco Carcase Press. Njlovygz Nshcdw Iocr Machine in good working order and any demonstration can be arranged. Leg Extensions to raise the working height. Air-Jet table to ease movement of cabinets inside the press. Infeed / Loading table with rollers. Outfeed table with rollers. Fully adjustable pressure on both vertical and horizontal. Automatic timer for the pressure. 3 x speed adjustment on axis movement. The configuration of this machine allows the throughfeed process to be introduced increasing efficiency within your factory.

Condition: new, The SIMPRESS is a full automatic, self-aligning case clamp (cabinet press) - developed for the entire furniture industry: for home, kitchen and bathroom as well as for office furniture manufacturers. THE ADVANTAGES: • Optimum power transmission through synchronous, inverter-controlled servomotors • Precise adjustment of the pressing pressure - adjustable to each type of cabinet (including brewing/45 ° connection), each body material and each body size up to max. 1,300 mm (H), 2,500 mm (L), 800 mm (T) • Maximum energy efficiency through minimal compressed air and electricity consumption • Highest precision in angle pressing (90°) • Maximum speed: up to two press cycles per minute with different cabinets • Convenient operation via color touchscreen (10") • Minimal wear and low maintenance compared to traditional case clamps/ cabinets presses Ncelhcjbgwaqjdw Ior • Minimal environmental impact due to low oil and grease consumption for lubricating the spindles and racks • Low noise emission due to fully electronic control of the pressing process • Compact design • Technology made in Germany MACHINE DATA: Height work table: 580 mm (adjustable, +/-50 mm)* Cabinet-/working height: min. 300 mm max. 1,300 mm* Cabinet-/Working length: min. 300 mm max. 2,500 mm* Work-/throughput depth: 800 mm* Conveyor speed: 10-40 m / min. Adjustable pressing time: 1-999 sec Vertical pressure: 3,000 kg Horizontal pressure: 3,000 kg POWER SUPPLY: Line voltage: 220/400 V - 50 Hz Control voltage: 24 V / DC Power consumption: 63 A / 400 VAC AIR SUPPLY: Min-Max. Pressure: 4 - 6 bar Price on request! *Special dimensions (SIMPRESS Special) available on request!

Condition: new, Year of construction: 2025, Economic and flexible – a self-adjusting case clamp that can cope with the constricted requirements of continuous line production. Ncsljbzw Najhcdw Ior The feed-through case clamp KOPMATIK will help you reduce the cost and time spent on set-up and adjustments. The workpiece is scanned visually and the machine will adjust itself automatically. Only pressing time and pressure have to be determined by the operator. The base frame is made of solid rolling-profiles Pressing force from 200 kg bis zu 3500 kg Adjustment speed max. 200 mm/sec The horizontal pressure element is a sturdy table construction The frame of the vertical pressure beam is made of thick steel tubes Central pressure element for vertical pressure beam (additional accessory) The control unit is a PLC Siemens, series S7-300

Year of construction: 1995, Condition: excellent (used), Blum Metapress ZMM 3320 Boxpress -Metabox year 1995 S/N AA77 Length of runner min 270 mm, max . 650 mm Ncslhcdwefgrgro Ier Carcase width min. 300 mm, max 1200 mm Thickness of bottom min.13mm, max. 16 mm Pneumatic press horizontal and vertical for BLUM Metabox Systems Dimensions of machine LxBxH approx. 2000x1200x2000mm in very good condition Weight 700 kg

Condition: excellent (used), A) Furniture Carcasse (Case) Continous Press Clamp (with CNC) "LIGMATECH" Mod. MDE 110/28/08 - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - CNC Power Control 22 T - Total installed power Kw 14 - Total length of the machine mm 6220 Nolhcdwslkbn Io Ijcr Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2800 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 280 /1320 B) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000) C) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000)

Condition: excellent (used), Year of construction: 2002, Body press Manufacturer: LIGMATECH Type: MPH 10/08 Year of construction: 2002 Cage size: max. 2,200 x 1,150 mm Press pressure: 14 kN Number of vertical cylinders: 3 Number of horizontal cylinders: 3 Ncslhcdouy Sp New Ior Dimensions: 3,700 x 850 x 2,500 mm

Condition: as good as new (ex-display), Functionality: fully functional, With tried and tested tolerance compensation (GANNOMAT system) 2 potentiometers for infinitely adjustable pressing force Pressing force min. 300/500 daN (kg) for Concept Eco or Pressing force min. 600/800 daN (kg) for Concept Primus Pressing force max. 2200 daN (kg) for Concept Eco or Pressing force max. 3500 daN (kg) for Concept Primus 3 pressing and adjustment speeds 5 /10 / 25 mm/sec. (with fine positioning / creep speed) Freely adjustable pressing time preselection with automatic opening Concept Eco: Simple operation via 6 separate push buttons for 8 movement sequences Njlhcdwsu Ei Iae Iocr Concept Primus: Simple operation via LCD display Universal area of application: Carcasses e.g. for furniture and cabinets Mitred carcasses Carcasses with protruding lid Drawers, drawers Pressing of several carcasses / drawers Advantages: Field-proven tolerance compensation (GANNOMAT system) Electromechanical cabinet press with frequency-controlled geared motors Independent vertical and horizontal press beam Long service life thanks to proven, high-quality components Solid and robust construction Space-saving design Carcass pressing = Simple + Fast + Efficient + Flexible + Precise + Professional Simple thanks to simple and practical control panel Fast thanks to press beam positioning speed of up to 50 mm/sec (optional) Efficient thanks to precise pressing of a wide range of carcase sizes Flexible thanks to adjustable parameters such as pressing force, pressing time and travel speeds Precise due to precise angular pressing of furniture carcasses and drawers Professional production of carcasses and drawers with modern carcass presses

Condition: used, Year of construction: 2024, machine/vehicle number: 1300.448, Neue Ausstellungsmaschine! Listenpreis: 32.665,- € komplett in Standardausführung mit: Stabiler, verwindungsfreier Rahmen aus Stahl, in Schweiß- und Schraubkonstruktion - Lamellen-Pressbalken OBEN mit 6 Elementen, Lamellen-Pressbalken SEITLICH mit 5 Elementen - Lamellen-Pressbalken mit praxisbewährtem Toleranzausgleich (System Ganner) für dicht verpresste Korpusverbindungen - Gegendruckflächen (Seitendruckwand, Boden) sind 38 mm starke, beschichtete, durchgehende Auflageplatten - Durchgehend Pressfläche mit Höhe 95 mm am Vertikal-Pressbalken unten - Elektromotorische Verstellung der beiden Pressbalken über Präzisions-Trapezgewindespindeln (mit erhöhter Steigungs- und Rundlaufgenauigkeit) und Hochleistungs-Laufmuttern mit Fettreservoir - Die Verpressung erfolgt elektromotorisch, über 2 getrennte Schneckengetriebemotoren (2 x 0,75 kW) - Die Presskraft der Pressbalken ist durch 2 Potentiometer stufenlos elektronisch eingestellt und über Frequenzumformer geregelt, daher ist die Presskraft-Regelung absolut verschleißfrei - Presskraft für Horizontal-Pressbalken min. 500 daN (kg) bis stufenlos max. 2200 daN (kg) - Presskraft für Vertikal-Pressbalken min. 300 daN (kg) bis stufenlos max. 2200 daN (kg) - Press- und Verstellgeschwindigkeit der Pressbalken mit Feinpositionierung, über 3-Stufen-Wahlschalter 5 / 10 / 25 mm/Sekunde - Einfachste Bedienung über 6 getrennte Drucktaster, 8 Bewegungsabläufe sind über Steuerung wählbar Ncslsuf Hx Hehcdw Isr - Frei einstellbare Presszeitvorwahl mit Öffnungsautomatik 0-30 min (umschaltbar auf Sekunden oder Stunden) - Arbeitshöhe/Beschickungshöhe: 300 mm - Arbeitsabmessungen: Länge min: 150 mm, max: 2500 mm Höhe min: 150 mm, max: 1400 mm Tiefe: 700 mm Gewicht: ca. 1800 kg Netto Abmessung: (Länge x Breite x Höhe) 3,45 m x 0,95 m x 2,30 m Elektrischer Anschluss: 400V, 3Ph, 50Hz (3,2 kVA, 16A) Zusatzausstattungen: Eilgang-Verfahrgeschwindigkeit, für schnelles Positionieren der Pressbalken, gesteuert über automatische Werkstückerkennung mit Sensoren in den Pressbalken, Pressgeschwindigkeit 5 / 10 / 25 mm/Sek. und Eilgang-Verfahrgeschwindigkeit 50 mm/Sek., die Sensoren können abgeschaltet werden für die Verpressung von Sonderteilen 1 Satz Maschinenfüße (Abrbeitshöhe 500 mm)

Condition: as good as new (ex-display), Year of construction: 2025, - working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - pressure force: 650 to 3500 dN [kg] / pressure wall - intercombing pressure walls - driven via 4 BALL SCREW SPINDLES - working height: 500 mm - Manual mode: control switch for 8 movement functions - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker - Pressure adjustment infinitely variable Nolhcdwef Eyc Ss Ijcr

Condition: used, length: 2.300 mm width: 800 mm height: 2.700 mm Workpiece size: 130 x 70 x 145 cm Ncolhcdjt H Tuxjw Ior Pneumatic carcass press or gluing press for pressing furniture carcasses or similar.

Condition: new, Year of construction: 2025, - Effective working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - Intercombing pressure walls - driven via 4 BALL SCREW SPINDLES - working height: 500 mm - Manual mode: control switch for 8 movement functions Nslhcdwjdikl Ao Iecr - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker - Pressure adjustment infinitely variable - Max. pressure 3500 dN [kg] / pressure wall - Safety line

Condition: new, Year of construction: 2025, - Fast traverse speed - 200 mm/sec. - Effective working dimensions 2500 x 1400 x 700 mm (98 x 55 x 27") - Intercombing pressure walls - driven via 8 BALL ROTATING SPINDLES - working height: 500 mm - Manual mode: control switch for 8 movement functions - Automatic: via electronic controlled contact initiator switch with electronic pressure supervisor / permanent contact maker - Automatic opening after expired timer - Pressure adjustment infinitely variable Njlhs Azcmscdw Ijcr - Max. pressure 3500 dN [kg] / pressure wall - Safety line - Air jets in machine base - Layout-table - Combined set-up station/discharge roller way -