Used other presses for woodworking for sale (48)

Condition: used, width 3.000 mm height 1.900 mm length 800 mm Pneumatic gluing press FEDERHENN MASCHINEN type 99.98 with equipment for the final assembly of grave crosses. The press is modular and mobile and can be converted for different pressing tasks. Fodolf H Uhopfx Adwega

Condition: excellent (used), Carcase press Fgedpoyvhn Ujfx Adwea

Condition: ready for operation (used), A heated platen forming press Italpresse in bottom piston design is available. Press force: 660t, platen dimensions X/Y: 1900mm/1600mm, heating power: 31kW, connected load: 108kW, rapid stroke cylinder diameter: 70mm, weight: approx. 28000kg. Documentation available. An on-site inspection is possible. Fgsdpfxsyxgrdj Adwea

Year of construction: 2016, condition: reconditioned (used), press aggregate with 2 hydraulic press arms around the glued board slats in the mechanical press offset free Fgsdsd Dcmqopfx Adwja to press. (instead of using a big hammer or big weights on the crane hook)

Condition: used, 4m Length, 670 working height, 850 minimum stroke. Fgjdpeymm Sfjfx Adwsa 8 x Cramping bars at 500mm centres 3 x Hyrdaulic cylinders via motorised pump with starter Suitable for open plan and wedged stairs

Year of construction: 2014, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, The KraussMaffei polyurethane injection presses are designed specifically for high-volume off-site timber frame production. With large 12.5 m × 3.3 m platen capacity and up to 260-ton clamping force, they allow full wall panels to be injected and in a single operation—delivering consistent insulation, structural stability, and repeatable quality. Integrated high-pressure metering and mixing systems ensure precise polyurethane dosing, while automated conveyors and positioning systems streamline panel loading and alignment. The result is faster cycle times, reduced labour, and factory-controlled insulation performance—making large-scale offsite timber frame manufacturing more efficient, predictable, and scalable. In short: Factory precision. Faster panel production. Consistent injected insulation for modern timber construction. Fgodpjyrh Ifefx Adwja

Condition: refurbished (used), HYDRAULIC HOT PLATE PRESS, MODEL LS/L/R 30/13 SP. 150 mm Fodpsn R Dihefx Adwsga Composition - LOADER - HYDRAULIC PRESS WITH HOT PLATENS, MODEL LS/L/R 30/13 SP. 150 mm - 3000x1300 mm HOT PLATE ROLLERS UNLOADER Press platen dimensions 3000x1300 mm. Press plungers No. 6 Ø 70 mm stroke 200 mm. Press platen thrust 70 t.

Condition: good (used), functionality: fully functional, price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Fgedpfx Aog Uk Eijdwea Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames

Condition: good (used), Bale-Pak for pressing shavings in good condition including a scraper conveyor, an ABB stacking robot and an automatic plastic wrapper Fgedpfx Aoimv N Tsdwsa

Year of construction: 1994, condition: ready for operation (used), Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800kN, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible. Fodpfxeu Rp Hme Adwjga

Year of construction: 1968, condition: ready for operation (used), An OTT heating plate press is available. Pressing area X/Y: 2250mm/1200mm, heating plates: 2, connected load: 14kW, pressing force: approx. 65t, max. pressing height: 300mm, machine dimensions X/Y/Z: approx. 2600mm/1350mm/1800mm, weight: approx. 3300kg. An on-site inspection is possible. Fgsdpsxd Auijfx Adwoa

Year of construction: 2008, condition: excellent (used), Electric heating element Shock- and impact-proof plug-in heating system with heating conductors embedded airtight in silicone.No wear, no corrosion, operational safety even in continuous operation and in case of impacts and shocks. Temperature adjustment via integrated controller with insulated control knob. Permanently connected industrial cable, no vulnerable plug connections. High-strength special aluminum profile for high load capacity and flat pressing surfaces on all sides. Gold anodized finish as standard, scratch and abrasion resistant, easy to clean. Size:Type: EST 21 Length: 2100 mm Connected load: 1100 Watt, 230 Volt Temperature: 0 / 40 / 70 / 100 / 170 / 200 degrees Location: ex stock 54634 Bitburg Fgedpfolcd Szsx Adwoa - immediately available -

Year of construction: 1955, condition: used, used manufactured by IMA type B55 built in 1955 Masch.-No. 0/650 pressing cylinder pneumatic 4 Fgodpevwf Szofx Adwoa table 2900x1300 mm working height 750 mm max. material thickness ca. 200 mm located in 97447 Gerolzhofen, free on truck, unpacked sale in current condition as seen without guarantee and warranty

Year of construction: 2000, condition: used, 2000 M.A.C. SN-OL 1230x650-10T Shrinker press for wood bending Working dimensions: mm. 1230 x 650 Pressure power: Ton. 10 Motor power: kW 5.5 Fsdpfx Adoychqhowoga

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request Fedpfx Asb Evnkedwoga

Condition: used, Year of construction: 2021, Drawer Clamping Machine – STROMAB STC 2500 B Technical Description: • Working capacity: 2100 x 1000 mm Fjdoxg I Sljpfx Adwoga • No. 2 working stations • Two-hand safety control button • No. 8 pneumatic cylinders, diameter 115 mm • Thrust per cylinder: 700 kg • No. 8 cast iron squares, height 170 mm Machine Configuration: • Frequency: 50 Hz • Standards: CE compliant • Electrical supply: 400 V – three-phase

Condition: good (used), CMP PRESS consisting of: 1. Hydraulic platform for loading coating 2. Automatic vacuum loader Mod. Inde 2700 3. Glue spreader with 4 rollers, length 2800 4. Hydraulic platform for internal longitudinal loading 5. Roller unloader for coating machine 6. Composition belt in vipla for sheet lamination 7. Composition belt 8. Belt with band for the composition of multilayers 9. Composition belt for the formation of panels 10. Accumulation belt 11. Loading belt with pusher for inserting panels into the loader 12. Press magazine with 12 compartments - Tablet loading - Stops - Hydraulic lifting 13. CMP press with 12 compartments Fgsdsvnth Sepfx Adwja - Width 1950 - Length 2700 - Pressure cylinders from above - 9 pressure cylinders - Opening cylinders 14. CMP unloader with 12 compartments - Luggage rack - Conveyor belt 15. Hydraulic platform for unloading panels 16. Hydraulic unit 17. Control panels and electrical control

Year of construction: 1985, condition: used, closing pressure 4360 kN table-size 730 x 730 mm control B+R Industrieelektronik draw back pressure 190 kN ajustment speed max. 60 mm/sec return speed max. 90 mm/sec daylight between the columns 900 mm total power requirement 30 kW dimensions of machine L x W x H 3,61 x 2,1 x 3,1 m dimensions of switch cabinet 0,85 x 0,44 x 2,0 m dimensions of hydaulic 1,0 x 0,85 x 2,36 m weight ca. 15 t = vulcanizing press with vertical closing unit, with form removal and Fsdpfx Aetqqr Eodwjga form separation device

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3480x1500x2000 mm Weight 5500 kg Fedpfsv A Hk Nsx Adwega Total power requirement 2 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 4500x1500x2000 mm Weight 6500 kg Total power requirement 2 kw Fgsdpfsv A Hmdsx Adwea

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3450x1550x2950 mm Weight 4500 kg Total power requirement 1,6 kw Fodpovz Hyzsfx Adwoga

Year of construction: 2025, condition: new, Dimensions (L/W/H) 4450x1550x2950 mm Weight 4800 kg Fjdpfx Aevz Hy Iodwega Total power requirement 1,6 kw

Year of construction: 2025, condition: new, Dimensions (L/W/H) 3750x1650x1970 mm Weight 5000 kg Total power requirement 6 kw Fgjdev A Hkpjpfx Adwsa

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2950x1550x2950 mm Fgedpfx Aevz Hyuedwea Weight 4000 kg Total power requirement 1,6 kw

Condition: excellent (used), Length 260 cm Fjdpfohpuiuex Adwsga 0,75 kW engine In very good condition.