Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Duodet Eq E Sjpfx Adwer Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: good (used), SIMIPIANTI COLD PRESS WITH MOVABLE UPPER PLATENS LOWER PLATEN: DIMENSIONS 1800x1215mm Dsdpfx Adjyk Hzujwour With rollers in the platen for panel conveying UPPER PLATEN IN 2 SECTIONS: 1800x600mm OPENING BETWEEN THE 2 PLATENS: 650mm

Condition: excellent (used), Year of construction: 2021, operating hours: 9,500 h, functionality: fully functional, machine/vehicle number: 3284, Standard version of RUF Lignum R2 with outfeed channels, el.motor 22 kW, briquette sizes 150x60 mm capacity up 500 kg/h Dodpfx Adeyyl Srjwour

Condition: good (used), Code: 0328 Brand: ITALPRESSE Duedpsyuyl Iefx Adwer Model: GL / 14,5 - 50 - 420 T - CE Standard Hydraulic press for composite materials and solid surfaces, moulds and decorative panels, suitable for use in the aerospace, aviation, woodworking, furniture, interior design, automotive, shipbuilding, construction, energy, defence, sports and public transport sectors, and various – CE Standard – Year 2005 Technical data: N°5 solid steel plates 1450 x 500 mm N° 3 pistons Diathermic oil heating Total thrust 420 tonnes Working diagram - see enclosed diagram Max power 9,3 Kw Full-load current 19 A The oil tank is located on top of the press and is fitted with a sight glass for checking the oil level Fluid (oil) temperature controller Two-hand control for closing the press Photocell safety barriers Fixed safety guards

Condition: ready for operation (used), functionality: fully functional, hydraulic PRESS with hot platens by with thermal oil model COLOMBO REMO HPC 150 second hand machine DRILLED SOLID STEEL PLATEN for wood, veneer, composite materials, furniture, panels etc platen useful size mm.3450 x 1400 n.08 cylinders diam.mm. 80 max. thrust Ton. 150 intermediate worktop ( 3 worktops , 2 work compartments ) hydraulic pump motor power Hp 4 heating by with thermal oil Djdpfx Adsyyzwdewjur weight kgs. 9.000 / 10.000 volt. 380/50

Year of construction: 2026, condition: new, Vacuum membrane press VPR-4000 is a universal press for woodworking and thermoforming. The VPR-4000 press is also tiltable and mobile. Applications: Veneering / Form gluing / Wrapping... Coating of various profiles (veneer, paper, plastic, etc.) Wood bending: production of curved and laminated components Vacuum system: Working surface with vacuum channels for even negative pressure, even with large workpieces. Dusdpfx Asyr R Hwjdwor Becker vacuum pump / oil-free / tank capacity 100 l Working area: 4000 x 1500 mm Pump power: 0.75 kW Vacuum pump flow rate: 40 m³/h Rubber membrane External dimensions: 4100 x 1650 x 1000 mm Weight: 400 kg Location: Ex stock 54634 Bitburg - Free loading on truck -

Condition: good (used), Year of construction: 1990, Edge or gluing press 5 vertical pistons 3 hold-down clamps External dimension: 3700 mm External height: 2480 mm Duedjyxyh Eepfx Adwor Available from location 57319 Bad Berleburg

Condition: good (used), Year of construction: 1989, Pressing area 2550 x 1350 mm Number of press cylinders #6 Total pressing force 140 t Opening width approx. 400 mm Dusdewd N Rmspfx Adwer Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 26 kW Space requirement (L x W x H) approx.: 3400 x 1600 x 2000 mm Weight: approx. 5500 kg Hydraulic hot plate press Down-piston design Electric hot platens Pressing pressure continuously adjustable via pressure switch Hydraulic pump Central control panel with all operating and Digital temperature display for both hot platens Press cycle counter Safety ripcord Rack compensation Main switch Note for used machines: • Errors in technical specifications and subject to prior sale. • Subject to change without notice. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 1993, OTT Model JU 2513 Hydraulic veneer press with electric heating plates Under-piston design BUSSE electric heating plates Central control panel with all operating elements Analog temperature display for both heating plates Pressing pressure infinitely adjustable via pressure switch device Main switch Two-stage hydraulic pump with automatic switching valve from low to high pressure Emergency safety pull cord Rack compensation Stroke limitation CE compliant Press area: 2500 x 1300 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 20.3 kW Required space (L x W x H): approx. 2900 x 1250 x 1900 mm Weight: approx. 3200 kg Dusdpfxjxgpaqe Adwsr

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Dodpfefh Tmmjx Adwour Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2920x980x1450 mm Weight 1500 kg Total power requirement 11,5 kw Dsdpsvz Hzrefx Adwjur

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Wemhöner Basic 1000 Plus - Year of manufacture: 2008 - Very good condition, little used * Type: KT-MB-28/15-240 * With automatic pin system and inline turner * 2 tables with automatic Vario-Pin system * Teflon coating for pre-glued foil * Foil laying system for pin table (pre-glued foil) * Heating plate size: 2800 x 1500 mm * Max. workpiece size: 2,540 x 1,250 mm * Membrane: Yes * Cutting station * Foil storage carousel, 3.2 m height with 14 hanging bars * PLC control: Siemens S7 * Control panel for Siemens TP 270 PLC (touchscreen) * Automatic membrane tensioning * Installed power supply: 38.5 kW * Max. chamber pressure: 6 bar Dujdpfx Ajxbcudjdwer * Max. pressing opening: 150 mm * 6 cylinders with Ø 125 mm * Operating voltage: 400V 50/60Hz * Press chamber height: 40/60 mm * Max. pressing force: 2400 kN * Operating pressure of hydraulic system: 320 bar

Condition: used, Year of construction: 1982, functionality: unexamined, Working area approx. 3500 x 2400 mm Dsdpfx Adsyyb Aaowjur 3 vertical cylinders 3 horizontal cylinders

Condition: ready for operation (used), functionality: fully functional, Hydraulic press "TIGER" model TM6B Code: PRS-041 Dsdpfeyyv Svex Adwour USED MACHINE – V380/50 Table dimensions: 3000×1300 mm Table heating: hot water Prepared for connection to central heating system 6 cylinders Ø 70 mm Serpentine plates with NEW aluminium cladding

Condition: used, Year of construction: 1976, pressing area: 2500mm x 1250mm opening: 360mm heating plate top: elektric Dujdpfx Ajx Edl Ejdwjr heating plate bottom: defective plate surface: ALU - anodized pressure: 90t number of cylinder: 4 electricity: ca. 33A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: used, Year of construction: 1987, pressing area: 2550mm x 1250mm opening: 400mm heating: elektric Dusdpjyt E Rmjfx Adwer plate surface: ALU - eloxiert Emergency stop switch: yes pressure: 80t number of cylinder: 4 electricity: 32,2A machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: excellent (used), Year of construction: 1991, machine/vehicle number: 211/91/1, functionality: fully functional, input current: 16 A, input frequency: 50 Hz, table width: 750 mm, table length: 2,700 mm, total length: 3,650 mm, total width: 850 mm, total height: 2,300 mm, overall weight: 2,200 kg, lifting height: 1,350 mm, working width: 750 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 750 mm, workpiece height (max.): 1,300 mm, height adjustment type: electric, space requirement height: 2,300 mm, space requirement length: 3,650 mm, space requirement width: 950 mm, working length: 2,500 mm, - Lamella - carcass press - Working area: Dsdpfx Adjyx Habjwour - Width from 150 - 2,500 mm, height from 150 - 1,300 mm; depth 750 mm; - 2,200 daN (kg) - The pressing force is adjustable to 85% + 70%. - Very robust machine

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 170 590, functionality: fully functional, input current: 16 A, input frequency: 50 Hz, table width: 700 mm, table length: 2,700 mm, total length: 3,400 mm, total width: 950 mm, total height: 2,300 mm, overall weight: 1,800 kg, working width: 700 mm, workpiece length (max.): 2,500 mm, workpiece width (max.): 700 mm, workpiece height (max.): 1,400 mm, height adjustment type: electric, working height: 1,400 mm, working length: 2,500 mm, Gannomat Concept 70 Lamella - Carcase Press Dodpfxsyx E Sco Adwsur Working area: Width from 150 - 2,500 mm, height from 150 - 1,400 mm; depth 700 mm; - Pressing force for horizontal pressure beam min. 500 daN (kg), continuously adjustable up to max. 2,200 daN (kg) - Pressing force for vertical pressure beam min. 300 daN (kg), continuously adjustable up to max. 2,200 daN (kg)

Condition: excellent (used), Year of construction: 2019, operating hours: 2,200 h, functionality: fully functional, power: 90 kW (122.37 HP), Briquetting press Ruf RB 1500 Year of manufacture: 2019 Only 2,299 original operating hours Including storage silo Duodpfx Adsyxfvzewer Including extraction system / Alko mobile dust extractor Very good condition, no defects Briquette size approx. 27 x 10 x 10 cm Throughput approx. 900 kg per hour Motor power 90 kW

Condition: ready for operation (used), Shelf length 2500 mm Shelf width 1200 mm Dsdeyynzpspfx Adweur 4 hydraulic pistons 75 mm Clearance 400 mm Water heating

Condition: ready for operation (used), Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic cylinders 85 mm Duodpfx Ajyynm Ejdwsr Clearance 450 mm Water heating

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 300 mm, working length: 3,000 mm, Block Press / Stationary Press for Multi-layer Parquet Manufacturer: Soest Model: T-80 Hydraulic cold press, previously used for pressing multi-layer parquet (top layer, core layer, and backing layer) Year of manufacture: 2009 (CE mark) Pressing width approx. 300 mm Duodjygcluepfx Adwor Pressing length approx. 3000 mm Maximum opening approx. 800 mm 4 pressing cylinders, diameter approx. 80 mm Pressing force 80 t, equivalent to approx. 9.2 kg/m2 Total connected load approx. 3.5 kW Weight approx. 2600 kg

Condition: ready for operation (used), A heated platen forming press Italpresse in bottom piston design is available. Press force: 660t, platen dimensions X/Y: 1900mm/1600mm, heating power: 31kW, connected load: 108kW, rapid stroke cylinder diameter: 70mm, weight: approx. 28000kg. Documentation available. An on-site inspection is possible. Duodoyxgrdspfx Adwor

Condition: used, Year of construction: 2000, Main features Exceptional durability allowing operation with challenging and diverse materials, such as various wood species Patented die mounting system providing: Optimal coaxial alignment of rotating parts, reducing vibration Increased durability of mechanical components, allowing for reduced maintenance costs Fast and easy die replacement Duedpfeyyb Ddsx Adwsr The free-rotation die function enables the operator to safely adjust the position of the rollers Instruments for measuring vibrations and temperature of bearings and rollers, preventing jamming Toothed belt transmission ensuring precision, efficiency, durability, and reduced maintenance costs Lubricant consumption reduction device, enabling significant savings Knives for reducing the length of material for wood processing Automatic roller positioning adjustment for animal feed production

Condition: excellent (used), Year of construction: 1980, Veneer Press Manufacturer: OTT Model: JU 2211 Year of manufacture: 1980 Plate size: 2,200 x 1,100 mm Opening height: 400 mm Pressing force: 70 t Specific pressing force: 2.9 kg/cm² Heating: Electric Duodpfx Adsywgr Uswer Plates: Gold anodised Safety device: Emergency stop cable