Used Veneer presses for sale (205)

Condition: excellent (used), Opportunity from liquidation Langzauner electric veneer press heating plates new 2500/1250 mm Teoqol9Q

Condition: used, Emergency stop bar, Control by push-button, gold anodized plates 0Ttxflli ----- Technical data ----- Pressing area: 2,500 x 1,250 mm, max. opening height: 400 mm, Number of cylinders:: 4 pieces Sold as is, without technical inspection

Condition: repair required (used), Year of construction: 1988, PLATING PRESS / ELECTRO-HYDRAULIC PANELLING MACHINE Model: BP/LYSTELSIMPLEX Serial number: L/339 Year : 1988 For the manufacture of laminated and/or plywood panels / sandwich panels This type of machine would be worth €86,000 new today: a repair is therefore worthwhile. MACHINING CAPABILITIES : - Motorized infeed - Automatic alignment - Max. usable contact surface of platens: 2475x1195 mm Maximum height (thickness): 240mm Panel passage: 2.50x1.40m - Cycle control - Floor height (working height): 91cm COMPOSITION & FEATURES : - Sturdy cast-iron frame Control panel Pressure gauges for : Pressure plates, Stop pushers & front presser - Hydraulic power unit - Infeed tables (for loading) 2.50x1.40m with rack & pinion pushers - Trays adaptable to heated water circuit: to be retrofitted (predisposed: internal heating coil) Aluminum surface plate Movable top plate : 4 Ø50mm hydraulic cylinders, 8 balancing rack guides Fixed bottom plate. - Independent front press 2 Ø50mm hydraulic cylinders, 2 rack guides - Depth stop with 5 Ø40mm hydraulic cylinders - Outfeed table 2.50x1.40m (for unloading) OTHER : - Power supply: 380v. Three-phase 50 Hz Intensity 9A Feed motor: 1 hp Hydraulic power unit motor: 3 hp Installed dimensions: see diagram Dimensions for transport (WxDxH): 3.70x1.60x2.00m & 3.00x2.00xh1.30m Weight: 4000 kg Bfrpwky2 Machine supplied with original French manual and wiring diagrams Machine offered as is.

Condition: ready for operation (used), shelf length 3000mm shelf width 1300mm Cyo0Tconl0 6 hydraulic cylinders cylinder diameter 70mm water heating gap between shelves 420mm safety switch - breakaway hydraulic pump motor power 1.5kW new aluminum shelf covers

Condition: good (used), OTT Dpta0L 220cm x 110cm Footprint 2.65m x 1.25m x 2m KW 12 Condition is good, ready for immediate use

Condition: excellent (used), Year of construction: 1985, Joos hydraulic veneer press with electric heating plates with GOLDELOXAL surfaces, built 1985 - top condition - machine no.:12549 1 floor Blv0Uhib7Dq Panel size: 2500 x 1100 mm Opening max.: 350 mm Press pressure: 65 to Spez. pressure: 2,4 kg/cm² Number of lower pistons: 4 pieces Piston diameter: 80 mm Operating pressure: 325 atü Heating medium: electric Inching control: Swivel control panel Connected load: 15.4 kW LxWxH approx.: 3000 x 1300 x 2000 Weight approx.: approx. 2900 kg Emergency stop - step protection Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, Year of construction: 2011, Panel length: 3.500 mm Panel width: 1.550 mm Daylight opening: 450 mm Number of daylights: 1 Total pressure: 160 t Total pressure t: 3,51 kg/cm² Number of cylinders: 8 Diameter cylinder: 90 mm Cold press: Yes Parallel guidance by toothed rack: Yes Safety device: Yes Pressing force: electrohydraulic Type: Upstroking press Declaration of CE-conformity: Yes Conformity marking: CE mark Dppw2D Total connection: 4 kW

Condition: used, Year of construction: 1971, Used machine Used machine Year of construction: 1971 Pressing area 2500 x 1300 mm with gold anodized ELKOM energy-saving panels Number of pistons: 6 pieces Piston diameter 70 mm Opening width 400 mm Working power 1.1 kW Connected load per table top 9.1 kW Rd78Gjgdjj Weight 3700 kg Length 3150 mm width 1450 mm height 1785 mm Availability: short term Location: Flörsheim

Condition: excellent (used), Year of construction: 2021, Electric hot plate press SCM Model: sergiani gs 6/90 30-13 Technical data: Dimensions of the heating plates 3000 x 1300 mm Number of heating plates 2 # Number of pressing cylinders 6 # Dpgkah Pressing pressure 90 t (900 kN) Cylinder diameter 70 mm Number of decks 1 # Deck opening approx. 400 mm Connected load approx. 22 kW ELECTRIC HEATING PLATES ELKOM The heating plates consist of 2 calibrated aluminum plates in which the electrical resistors are installed. The maximum operating temperature is 120 degrees C. An insulating plate provides thermal insulation from the press. The heating plates are fixed to the press with special brackets to allow for thermal expansion and to facilitate maintenance and replacement. Maximum operating temperature of 120 deg. C (independently adjustable on each level). The composition of the panels is formed as follows: - 20 mm thick iso-chipboard as thermal insulation. - Composite panel with special resistors with thick pitch grid for excellent temperature uniformity on the surface. - 4 mm thick calibrated steel sheet, coated with a Mylar film. The sandwich thus assembled is fixed on the top to the structure of the press, allowing thermal expansion and facilitating possible technical interventions. Max. Temperature of the heating plate 120 degrees C Working temperature 90 degrees C Shutter control Thermal protection switch The cylinders are made of specially welded and large-dimensioned steel tubes. Hydraulics: Compact hydraulic unit made by HAWE in Germany. Pump for closing phase and pressure build-up phase. Automatic holding pressure adjustment Power of the hydraulic unit 3 kW Movement of the press table from bottom to top. Press frame: The press frame consists of a heavy, torsion-resistant and stress-free welded steel construction. Both press tables are welded from HEA profiles. The assemblies are machined on CNC processing machines. Movement of the press table with toothed racks and parallel guide at 2 corners of the press table made of self-lubricating material. CONTROL PANEL with display and keyboard: Siemens control panel with 7-inch color touch screen with connection to Ethernet network for remote maintenance service. The system is equipped with its own software that makes operating the press simple and intuitive. You can program, call up and change the following parameters: - Automatic regulation of the hydraulic pressure based on the size of the workpiece and the specific pressure required. The system regulates the pressure of the cylinders automatically and the operator does not have to make calculations with graphs or tables. - Possibility to store up to 100 work recipes (temperature, specific pressure, pressing time, plate size). - Direct adjustment of the hydraulic pressure of the cylinders with digital control based on the graph. This system can be used as an alternative to automatic regulation if you prefer to work with the traditional method. - Electronic regulation of the pressing time (can be switched off). - Electronic control of the temperature of the tables - Automatic restoration of pressure based on the yielding of the material. - Complete diagnostics and fault indication with messages on the display.

Condition: used, Description / tech. Data: JOOS heating plate veneer press with very good gold anodized heating plates Both heating plates are undamaged Top and bottom plates heat up over the entire surface Press pressure is maintained and adjusted Pressing area 2200x1250mm Opening between the plates 290mm Overall dimensions 2550x1400x1800mm high Dpsdxn The press is older, year of manufacture unfortunately not known. But the technology is in order and the plates are in very good condition.

Condition: excellent (used), A Joos veneering press is for sale. The machine can be inspected and tested on site. About the machine: - pneumatic press - 2200 mm x 1100 mm pressing surface - Table can be pulled out for easy loading - 2x gold anodized electric heating plates - Weight approx. 2000 kg All machine documents are still available. The price is gross, i.e. € 3500.00 net. An invoice will be issued for the machine. Shipping the machine is of course no problem for an additional charge. Cx923V2Dlg Please contact us if you have any questions or are interested! Your JG Holztechnik Team

Condition: ready for operation (used), Veneer press Joos - Press for form parts pressing area 2500 x 1100 mm pressing area can be separated in 3 areas pressing area of the 3 parts approx. 3 x 650 mm x 1100 mm Doykzt opening height 550 mm pressure 2 kg/cm² without heating panels with electric heated form

Condition: used, Year of construction: 2022, Panel length: 3.100 mm Panel width: 1.550 mm Daylight opening: 300 mm Number of daylights: 1 Total pressure: 120 t Number of cylinders: 10 Diameter cylinder: 80 mm Main motor power: 5,5 kW Heating plates: Thermo oil Heating top/bottom seperately: Yes Parallel guidance by toothed rack: Yes Pressing time programmable: Yes Dppru2 Safety device: Yes Pressing force: electrohydraulic Type: Upstroking press Conformity marking: CE mark

Condition: excellent (used), Year of construction: 2022, Width 210mm bonding length 110cm Czwbczysay

Condition: used, Year of construction: 1996, Functionality: fully functional, Machine/vehicle number: AP35, The double milling machine is functional. Dptfez

Condition: used, Model: Manni brand press, with hot water heated plates (hot water generator not included), dimensions 2,300 x 1100 mm, 4 lower pistons, used. Spare aluminum plates included in the price (to be assembled). Hjcjaiyz0

Condition: good (used), Year of construction: 2017, Interwood FHU 1400/5000 Cold press Feeding through 1400mm side Driven heavy duty belt conveyer mounted on a solid steel ground base Down stroke press Hydraulic cylinders 8 x 100mm Working pressure 120 tonnes Platen working area 1400mm x 5000mm Maximum daylight 500mm Fully closing Automatic pressure gauge Dpi3Ev Automatic timer control. Top mounted hydraulic pump Motor power 5.5 + 4Kw Complete with infeed and outeed conveyors [ not shown in photo's ] Year - 2017 CE

Condition: good (used), Year of construction: 1982, Plate dimensions 2550 x 1350 mm mm Daylight opening 400 mm Number of daylights 1 St. Heating elektrisch Specific pressure 2,8 - 4,0 kg/cm² Total pressure 90 to Motor output kW Dimensions (L/W/H) mm Dpnozp weight of the machine ca. kg Year Year

Condition: used, Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated Bjjj3Tnt8Om input/output is included 8 cylinders Complete with glue roller etc.

Condition: used, Veneer press continuous press gluing press plate press B&uuml rkle HSO 240/D 340/140 Press dimensions: 3400x1400mm Max discharge pressure 240T Max pressing pressure 6 kg/cm&sup2 Cylinders 8 pcs. with diameter 110mm Stroke 150mm Solid plates 40mm Water heated with boiler up to 60 degrees. Plates can be heated up to 150 degrees with the right boiler. Glue roller: Omma GS 414 Year of construction 2004 Qvtht3Eo29 Working width max. 1400mm (useful 1360mm) Roll diameter 200mm 4 rolls Press dimensions: 2500x3900xH2800mm, 8500kg Input conveyor dimensions: 2200x3600mm, 500kg Glue roller dimensions: 1600x800xH1500mm, 900kg Documentation still available, first owner! Sold as one unit including conveyor belts and glue roller.

Condition: used, Veneer press Italpresse P 33 3300x1400mm 6 cylinders, diameter 100mm Stroke 150mm Oil heated to 120 degrees Solid plates 45mm thick Guxjgtm3

Condition: used, Veneer press JOOS 2200x1100mm Working length 2200mm Working width 1100mm Working height 285mm Electric heated to +/- 150 degrees 4 cylinders Dimensions 3000x1200x2100mm, weight 3500kg B9Essiokv0

Condition: used, Year of construction: 2005, Feed through press Langzauner LZT-OK 70 E SO Year of construction 2005 Serial number 401-05-X077 Maximum press dimensions 3000x1500mm Cw38Mdmv Maximum stroke 400mm Pressure 70T20kW, 31Amp, 380V 6cylinders Top plate 3000x1500mm, electrically heated Base plate 3400x1680mm, not heated With input and output conveyor. Dimensions:12000x2350xH2650mm, weight 6500kg

Condition: used, Year of construction: 1991, High frequency press Brand: Italpresse Type: GB/13 Max pressure: 120T Pressing area 2500x1300mm Pressing height 200mm 6 cylinders diameter 90mm Speed 12m/min E2Mep0Q Complete line with loading system, gluing machine, destacker and High frequency cabinet.Machine needs some maintenance. Probably the PLC lost his parameters, and some small parts needs to be changed.&nbsp

Condition: used, Year of construction: 2015, Veneer press Steton P 70 E Year of construction 2015 Press size 3100x1300mm Opening 450mm Number of cylinders 6pcs. Cylinder diameter 70mm Electric heating 19.6kW, max. 120 degrees Max. pressing pressure 70 tons Pressure 2 KG/cm&sup2 Dimensions. 3600 x 1730 x 2060mm, weight 3750kg Biieqjp98B2