year of manufacture: 1978
lower pressing table constant height – upper pressing table moves down
pressing area approx. 4300 mm x 1350 mm
8 pressing pistons from top
was used as cold press
water pipes for connection to hot water supply existing
press is still electric connected, machine is in good working condition
with 1 roll throughfeed foil 1400 mm wide
Type T2 E
with lateral pressure
3000 x 1300 mm
with 9 cylinders
pressure from top 3,5kg/cm²
lateral pressure 10 kg/cm²
with glue application machine
with feeding table (electric)
with take off table
Hydraulic short-cycle presses HÖFER HKP 120
Year of manufacture 1988
Pressing pressure 120 t
Pressing pressure N/cm2: 40
number of cylinders: 8
Heating platen size: 2300 x 1350mm
connected load 7,5kW
Hot water heating
The standard equipment includes:
- Pressing portals made of solid steel
- Press cylinders made of seamless high-strength steel tubes
- Press pistons made of alloyed steel, ground and hard-chrome plated
- our proven piston sealing and guiding system
Pressing surface: 3150 x 1600 mm
Total pressure surface: 150 to
specific pressure: 30 dAN/cm²
operating pressure 350 bar
Daylight height: 200 mm
Throughfeed belt speed: 22 m/min
Loading from the wide side
heating platens for heating with hot water maximum temperature 130°C
Throughfeed press line Wild
year of manufacture: 1992
with infeed band and destacker
At the infeed side:
Veneer laying table with 3 shelfs for veneer
L 3600 mm x W 1350 mm
Infeed band type: PB/F II 3000
with lifting facility to feed the 2 floors of the press
type: PB/F II 3000
L 4000 mm x W1350 mm
2 transport bands each 650 mm wide each with drive and moveable to the side
to feed the press in 2 rows
Throughfeed press Wild
type: Optima 2 x 1
pressing plate size L 3600 m...
Wemhöner short-cycle press with Meilerband
Plate formats max.
width 1220 mm
length 3000 mm
thickness max. approx. 85 mm
pressing pressure max. approx. 8 kg/cm²
as normal short-cycle press or with side pressure device for pressing 1- and 3-layer solid wood panels
including infeed and outfeed mechanization
including thermal oil pumps and control system
with Siemens control S5
Picture 1 from manufacturer al example
rest pictures original
Designation: Timper Press V 200
Main pressing pressure from below:
Number of pressing chambers: 2
Max. Blade width: 270 mm
Max. Glulam length: up to 18 m
Glue beam contour: straight
Lateral alignment of the lamellas: included
Pressure system: hydraulic
Permanent pressure control: included
Feeding / discharging: in longitudinal direction
Sample - production on customerdemand:
Press area: 3500 x 1350 mm
No. of cylilnders: 8 pcs.
Diameter of cylinders 85 mm
Specific pressure: 3,4 kg/cm² (with 350 bar), based on 80 % of the press area
Press force: 16 - 160 TO
Max. operating temperatur: 120°C
Heating power: 230/400 V, 12,7 kW / heating plate, separately adjustable
Stroke / opening: 400 mm
Closing / opening speed: approx. 20 mm/sec
Working height: ~900 mm
Belt speed: max. 15 m/min
Continuous press hot water
Length 6,00 meter
Width 1,30 meter
Height 15 cm.
Roller conveyor for layer formation,
for flat or standing gluing
window scantlings were glued on it
Sample - production on customerdemand:
This heavy press series, constructed as a down-stroke machine, has been designed especially for high specific pressure. Due to the high specific pressure, this state-of-art model comes with drilled steel heating plates. The control unites are located in a central switch console. The design is corresponding to our newest developments in technology.
- Lengthwise feed gantry construction (gantries = solid steel frame)
- Cross ...
The increased income significantly shortened the planned amortisation time. According to our satisfied customer, this investment – a large one by its standards – was one of its very best decisions.
3-fold capacity increase as compared to conventional production methods with veneer presses
Adaptation of the plant to the customer specifications
Best ergonomic design
Pilot laser systems ease placing the boards
Fully-automatic measuring of the components and cylinder shu...
Total press force: 120 to
Size: 3000 x 1350 mm
Spez. Pressure: 6 kg/cm²
Number/Diameter cylinders: 6 pcs. / 85 mm
Max. opening/stroke: 400 mm
Side pressing cylinder: 8 pcs.
Side pressure force: 24 tons
This two-in-one press finds application where solid wood is being worked and also allows the pressing of veneers. When pressing veneers using the Model MHP, the procedure is the same as by all standard models.
This machine has a special hydraulic cycle which is to activated when pressin...
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
MSG Auctions GmbH does not assume liability for the content of linked external websites.