Year of construction: 2024, Condition: new, Exclusively from Columbus: the digital master manual with user knowledge from +45 years enables safe use of the press Modular system: Vacuum press with flap opening - can be upgraded at any time with a vertical opening mechanism for high workpieces and better usability AND heating for forming plastic panels (such as Corian) 3 different sizes available Fo Ia Ujv Ulkfslttegb Austrian, ISO-certified mechanical engineering quality with the exclusive use of branded components guarantees many years of use

Condition: new, Year of construction: 2025, Production time of the machine approx. 3.5 months Very robust machine with high pressing force - is also suitable for producing a saleable briquette quality *depending on the material. The large press cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Tried and tested, simple technology, for extremely low susceptibility to faults + 25 years of experience, further development and know-how + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + € 3,995 net, (can also be retrofitted later) * cools the press tongs (important from 3.5 hours) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compressor chamber + € 1,975 net recommended for light starting materials such as wood shavings Fj Ia Ulteffh Atstjgb Product code: 84793010 Briquette diameter: 65 mm Front bush: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Output (depending on material): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk weight of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo capacity: approx. 0.7 qbm Pump: 37 liters Hydraulic pre-compressor Cooling press tongs option: yes, with special accessory Coolable press tongs Cooling of the pressing tongs via water tank (to be procured on site) Hydraulic oil cooling option: yes Fill level monitoring option: yes Briquette option: yes (depending on material) CE compliant . Requirements for the raw material: - The moisture content (atro) must be between a minimum of 6 and a maximum of 18 % - Chip length maximum 15 mm - Installation temperature: tempered room at a minimum of +5°C - The feed must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and / or increased wear may result

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Fs Ia Ultoqd Uy Astsgb Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

Condition: new, Year of construction: 2025, Functionality: fully functional, total width: 1,600 mm, total length: 3,100 mm, total height: 1,600 mm, overall weight: 750 kg, type of input current: three-phase, input current: 12 A, pressing force: 9 t, input frequency: 50 Hz, operating temperature: 200 °C, input voltage: 400 V, The machine is designed for vacuum forming of various elements of thermoplastic plates such as: PP, PET, PS, HIPS, EPS, PLA, PVC, PMMA, KYDEX. Technical dat Working area dimension: 800×600 mm The dimension of the plate sheet: 860×660 mm Working table stroke: 290mm Thermoformed board thickness: 0,2 to 2 mm only the upper inrun heating Fo Ia Ueiimw Aolttegb Thermoformed board thickness: 3 to 5 mm additionaly lower inrun heating Power supply for the electric installation: 400V Heating power: *Upper inrun heating -12 kW *Lower inrun heating - 12 kW *Lower heating heating to maintain the temperature of the template - 2.4 kW Vacuum pump performance: 40 m3 oil Pressure in the chamber: ok.0,95-0,98 kg/cm2 Dimensions: width x depth x height: 1500 x 1600 x 1800 mm Weight: 600 kg Optionally, the machine can be configured according to the customer’s wishes: -increasing the dimensions of the working area, -demonstrative temperature measurement of the dome and material, -pneumatic clamp of frame -material cooling, -mobile control panel, -adaptation to work with a roll of foil, -reduction frame narrowing the working area. We produce vacuum machines. Chceck our vebsite for more. We ship worldwide.

Condition: good (used), power: 75 kW (101.97 HP), Pellet press 75 kW: 800 kg/h Fs Ia Uovg A Huolttogb Overhauled by the Nova Pellet factory - main bearing for DIE replaced - cost: €13,000 Original electrical cabinet, Siemens PLC control Additional spare parts: Die and rollers

Condition: excellent (used), Year of construction: 1992, press area 2500 x 1100 mm press cylinder no. # 4 pressure max. 70 t voltage 3 x 400 V + N, 50 Hz. Fgo Ia Ueih Svfelttsb total electric load 14,7 kW electric heating platen working pressure adjustable via pressure clock central operating panel with all main machine functions temperature display for both platen emergency release cord heavy duty gear rack opening hight programmer microswitches to prevent uneven closing of the platen dimensions approx. L x B x H ca.: 2900 x 1250 x 1900 mm weight approx. ca. 3200 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 2024, Condition: new, Functionality: fully functional, The vacuum bag for professionals and handymen - DIRECTLY FROM THE INVENTOR Fge Ia Ultsv Ulkrjtsb Vacuflex is the ideal vacuum bag for professional users who want to profitably produce exceptional workpieces made of wood or wood-like materials. The robust and fabric-reinforced material guarantees longevity even when used at the highest level. Thus, the vacuum bag fits perfectly into professional production processes. With Vacuflex, you are able to extend your product range extremely, achieve better results in the production process significantly and inspire your customers with short production times. Vacuflex is the number one choice when it comes to manufacturing very large workpieces in the fastest way possible. For this reason, it is also ideal as a complement to vacuum presses and gives you the certainty that you can always cover the widest possible range of production processes cost-efficiently without suppliers. With this system, which has been tried and tested for over 40 years, hundreds of users have already been able to achieve extraordinary results in production and sustainably increase their success through the use of vacuum technology. It is ready for use very quickly and amortizes itself in a short period of time, even at low utilization.

Condition: used, Year of construction: 2003, machine/vehicle number: 92630105, ORMA multi-shelf press Shelf size 2500x1300 mm Fj Iaowd Rxro Ulttjgb Number of shelves 4 pcs Steam heating

Condition: ready for operation (used), Steinemann Veneer Press Press size 2750 x 1350 mm Opening width 600 mm. Please note: The press must be recessed 200 mm into the floor or placed on 200 mm feet. Electric heating plates 16.8 kW Press force 90 tons Specific pressure 3 kg/cm² Cylinders 6 x 80 mm Weight approx. 4800 kg Space required 3700 x 1400 x 2100 plus 200 mm at the bottom Price 6000.- Fe Ia Ultsv Uqrbjtjgb Condition: Ready for use

Condition: excellent (used), Press for gluing wood with a feeder STETON PLA 2500x1300 - Italian production - CE and DTR - year of production 1998 TECHNICAL PARAMETERS: shelf dimensions 2500 x 1300 mm six hydraulic cylinders with a diameter of 85 mm automatic glue applicator with pneumatic feed a four-section feeding table with the possibility of setting each section individually the ability to set the number of elements fed for each section element dimension min. 300x30x25 (LxWxT) mm element dimension max. 2500x160x40 (LxWxT) mm Fgj Ia Ultoh Tm A Eetsb shelf pressure 260 bar max pressure of side pressure 120 bar bumper max pressure 200 bar total power 11 kW temperature max 120 " roller feed speed from 5-60 m / min feeder speed 0 -40 m / min adjustable speeds on the inverter roller receiving table 1400 x 2500 mm seven side hydraulic cylinders 1800 mm feeding conveyor electric heating of shelves cross feeding table 2500 x 1400 mm total length 588 cm total width 497 cm Transport dimensions 1000x 230x 220 cm weight 11 t

Condition: excellent (used), Year of construction: 1990, Carousel Press Hess Mrotor + Glue Applicator Year of Manufacture: 1990 Technical Condition: Very Good Fgj Isv Nxdbea Ulttjb

Condition: new, Technische Daten: Abmessungen der Heizplatten 3000 x 1300 mm Anzahl der Heizplatten 2 # Anzahl der Presszylinder 6 # Pressdruck 90 t (900 kN) Zylinderdurchmesser 70 mm Anzahl der Etagen 1 # Etagenöffnung ca. 400 mm Anschlussleistung ca. 21,0 kW ELEKTRISCH BEHEIZBARE TISCHE (ELKOM - Deutschland) Der Tisch besteht aus 2 kalibrierten Aluminiumplatten, in denen die elektrischen Widerstände verlegt sind. Die maximale Betriebstemperatur ist 120 Grad C. Im am Tisch wird eine Dämmplatte montiert, die zur Wärmeisolierung gegenüber der Presse dient. Der Bau des Tisches und die präzise Verarbeitung, die von spezialisierten Firmen vorgenommen werden, gewährleisten eine sehr gleichmäßige Verteilung der Temperatur. Die Heizplatten sind mit speziellen Halterungen an der Presse befestigt um die Wärmeausdehnung zu erlauben, außerdem erleichtern sie die Wartung und das Auswechseln. Spezifischer Betriebsdruck des Tisches bis zu 10 kg/cm2 Max. Temperatur der Heizplatte 120 Grad C Arbeitstemperatur 90 Grad C Schuetzsteuerung Waermeschutzschalter Die Zylinder sind aus spezial geschweissten und gross dimensionierten Stahlrohren hergestellt. Hydraulik: Kompakte hydraulische Einheit Fabrikat HAWE aus Deutschland. Pumpe fuer Schliessphase und Druckaufbauphase. Automatische Nachdruckverstellung Leistung der hydraulischen Einheit 3 kW Bewegung des Presstisch von unten nach oben. Pressengestell: Das Pressengestell besteht aus einer schweren verwindungssteifen und spannungsfrei geschweissten Stahlkonstruktion. Beide Presstische sind aus HEA-Profilen geschweisst. Die Bearbeitung der Baugruppen erfolgt auf CNC-Barbeitungsmaschinen. Bewegung des Presstisches mit Zahnstangen und Parallelfuehrung an 2 Ecken des Presstisches aus selbstschmierenden Material. BEDIENTAFEL mit Display und Tastatur: Bedientafel Siemens mit 7-Zoll-Farb-Touchscreen mit Verbindung zum Ethernet- Netzwerk für den Fernwartungsservice. Fs Ia Ultefh Tmmjtogb Das System ist mit einer eigenen Software ausgestattet durch die die Bedienung der Presse einfach und intuitiv erfolgen kann. Sie können folgende Parameter programmieren, abrufen und ändern: - Automatische Regelung des hydraulischen Drucks aufgrund des Werkstückgrösse und des gewünschten spezifischen Drucks. Das System reguliert den Druck der Zylinder automatisch und der Bediener muss keine Berechnungen mit Grafiken oder Tabellen anstellen. - Möglichkeit zum Speichern von bis zu 100 Arbeitsrezepten (Temperatur, spezifischer Druck, Pressdauer, Plattengrösse). - Direkteinstellung des hydraulischen Drucks der Zylinder mit digitaler Kontrolle aufgrund der Grafik. Dieses System kann alternativ zur automatischen Regulierung verwendet werden, falls Sie lieber mit der herkömmlichen Methode arbeiten. - Elektronische Regelung der Pressdauer - Elektronische Kontrolle der Temperatur der Tische - Automatische Wiederherstellung des Drucks aufgrund des Nachgebens des Materials. - Komplette Diagnostik und Störungsanzeige mit Meldungen am Display. WEITERE AUSSTATTUNG UND MERKMALE DER PRESSE Haken zum Anheben der Maschine um das Laden/ Entladen der Maschine beim Transport zu erleichtern. Nivelliervorrichtungen die an den Füssen der Presse montiert sind. In die Presse integrierte Schalttafel; dadurch sind weniger Aussenkabel notwendig, die vorhandenen sind jedoch auf jeden Fall angemessen geschützt. inkl. Option: Fehlbelegungsüberwachung (Ebenheitskontrolle)

Year of construction: 2023, Condition: new, INFINITY - the vacuum press system in special lengths The Columbus INFINITY is the new and groundbreaking vacuum press system that can be constructed in the length desired by the user on request. The specially created and eponymous Infinity Principle, according to which the usable area in terms of length can be increased very cost-effectively almost to infinity, is used in each individual component. The system offers both maximum flexibility and maximum efficiency, because where the Infinity Vacuum Table and the Rolling Membrane System offer infinity, the Multi-Zone Suction guarantees maximum control. Thanks to this Multi-Zone Suction, only that section of the usable area that is currently in use is vacuumized. Fgs Ia Usv Uli Uolttjb INFINITY is perfect for all users who value an infinite usable area for a wide variety of special pressing with maximum yield volume. Directly from the manufacturer - including warranty! Execution: Length and width on customer request! Table base made of stable, welded metal construction, adjustable table feet. The table material is a 21 mm thick birch plywood board. An approx. 15 mm wide vacuum suction groove is milled on the table surface to seal the membrane. The membrane is wound onto a reel and is manually unrolled onto the table surface using a very smooth-running linear slide. The cavities of the table frame serve as vacuum buffer storage. The vacuum pump has an output of 100 m³/hour. The table surface has several suction grooves, these are divided into 5 suction zones. The table load is about 200 kg / m

Condition: used, Year of construction: 1988, height adjustment type: hydraulic, 1x Used KAHL C39 - 1000 Pellet Press Pelletmill Incl. Hydraulic nut Fe Ia Ultov N Rdajtogb Incl. 4 Roller head Incl. 5 Roller head Incl. various spare parts Incl. chassis 110kW 1500rpm Electric motor

Year of construction: 2015, Condition: new, Press the door lignum-EVERT JOHANSON TPBH 2300X1300 Press bonding framework of internal and external doors " Companies Lignum-Evert Johanson --- pneumatic-hydraulic press bonding size maximum dimensions: Length 2330 mm Width 1330 mm adjustable working pressure and the size of the door bonded Fo Iecczuqja Ulttogb hardware give one year warranty

Condition: new, Year of construction: 2025, Pliers cylinder suitable for Weima / Gross / Reinbeold and Votecs briquetting presses with briquette diameter 50 mm. Fj Iowcq Anja Ulttsgb

Condition: good (used), Year of construction: 1998, Functionality: fully functional, pressure: 60 bar, pressure (max.): 290 bar, working length: 18,000 mm, For Sale: Eissele MegaPress 2000 – Block Gluing Press (1998) We are offering an Eissele MegaPress 2000, a high-capacity block gluing press ideal for industrial laminated timber production and structural woodworking applications. Technical Specifications: Brand & Model: Eissele MegaPress 2000 Year of Manufacture: 1998 Pressing Length: 18,000 mm Switchable: 1x 12 m / 1x 6 m Insert Height: 2,850mm Insert Width: 670mm Cylinder Stroke: 1,500mm Distance Between Press Cylinders: 400 mm Pressing Pressure (Vertical Cylinders): 10 kp/cm², adjustable from 60–290 bar Pressing Pressure (Alignment Beams): 6,000 kg System Type: Electro-hydraulic Key Features: Suitable for CE Certification: We provide a custom-written manual for this press process, enabling you to achieve CE marking for your laminated wood products. Heavy-Duty Performance: Built for demanding industrial environments with precision and strength. Flexible Production: Can be operated in two separate sections for 6 or 12 meters. High Efficiency: Even pressure distribution ensures strong bonds and consistent quality. Additional Information: The machine is currently in use at our location in Wieringerwerf, the Netherlands. Live demonstration possible – buyers can view the press while it is operational. Buyer is responsible for dismantling and transport. Optional Add-ons (available at extra cost): Glue Spreader Roller Conveyor (Material Infeed System) Fgs Ia Ujwa Nnwolttjb These accessories are available separately and complement the press system for a complete gluing workflow. Interested? Contact us for more details, pricing, or to arrange a viewing appointment.

Condition: excellent (used), Hot plate press with medium heating plates Pressing surface 2750 x 1300 mm Number of press cylinders # 6 Total pressing force 100 t Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 3.0 kW Fgj Ia Ulovzq Rkjtteb Space requirement (L x W x H) approx.: 3300 x 1450 x 1950 mm Weight: approx. 3700 kg Hydraulic hot plate press Lower piston design Medium heating plates - for connection to the central hot water supply Pressing pressure continuously adjustable using a pressure switch Central control panel Analog temperature display for hot plates Safety ripcord Rack compensation Main switch Automatic opening Stroke limitation NEW AL cover plates

Year of construction: 2023, Condition: new, Exclusive to Columbus: the digital master manual with user knowledge from +45 years Modular system - can be upgraded at any time with a vertical opening mechanism and heating system for plastic panels! Directly from the manufacturer - including warranty! PIONEER Basic L - high-precision vacuum press incl.: • Membrane fast-change system • Gas springs for flap opening • Highly elastic natural rubber membrane (up to +130 °C) • Stable phenolic resin worktop (up to +120 °C) • 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) from BECKER • Analog vacuum pressure gauge • Connection for external vacuum bag • Feet including smooth-running swivel castors Fge Ia Ultev Ulhqstsb • Mounting fixture for vertical opening system • FESTO pneumatics and SIEMENS electrics Technical data: • Voltage: 400 V • Power: 1,3 kW • Supply frequency: 50 Hz Dimensions: • Usable area: approx. 3050 x 1350 mm • Dimensions inside the frame: approx. 3130 x 1430 mm • Max. workpiece height: approx. 600 mm • Overall dimensions: approx. 3700 x 1640 x 1080 mm

Condition: like new (used), Year of construction: 2024, Ideal for the production of frames, windows, and doors thanks to horizontal and vertical pressing units. Central hydraulic pressure generation via hand pump with pressure gauge. Each pressing unit can be individually shut off with a shut-off valve. Integrated hold-down device for full-surface support of the workpiece. Working area height: 1550 mm Working area width: 2500 mm Number of horizontal pressing units: 2 Number of vertical pressing units: 4 Fgs Iewcfuxea Ulttjb Maximum piston stroke: 95 mm Maximum pressing force: 2500 kg Hydraulic oil volume: 1.6 l Hydraulic oil L-HM-32 Vertical hole pattern: 50 mm Horizontal hole pattern: 240 mm Number of pistons: 6 Dimensions and weights Length approx. 3300 mm Width/depth approx. 900 mm Height approx. 2000 mm Weight approx. 325 kg This was a sample machine; it is fully functional and has minor defects. Signs of wear. The instruction manual and operating tools are included. Serial number: MU-001. Year of manufacture: 2024.

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 203841024, pressing force: 120 t, opening height: 400 mm, working width: 3,500 mm, net weight: 5,150 kg, number of cylinders: 8, TECHNICAL DETAILS Press size: 3.5 x 1.3 m Opening stroke: 400 mm Max. pressing pressure: 120 tons Number of cylinders: 8 Oil boiler temperature: Max. 120 °C Heating power: 18 kW MACHINE DETAILS Fgj Iowa R S Dea Ulttob Dimensions: 4.5 x 2.1 x 2.2 m Weight: 5,150 kg Operating voltage: 400 V / 50 Hz EQUIPMENT - Touch screen with computerized interface TS/400 - Mylar cover for upper and lower platens - Electronic flatness control (EFC) - Exclusion of the leftmost cylinder row - CE safety standards - Documentation

Condition: excellent (used), Pressing area 2500 x 1250 mm Number of press cylinders # 4 Total pressing force 70 t Operating voltage: 3 x 400 V + N, 50 Hz. Total connected load approx. 20.3 kW Space requirement (L x W x H) approx.: 2900 x 1350 x 1900 mm Weight: approx. 3600 kg Fgs Ia Ulterivrwoteb Hydraulic hot plate press Lower piston design Electric heating plates gold anodized version Press pressure infinitely variable by means of pressure switch unit Two-stage hydraulic pump with automatic changeover valve from low to high pressure Central control panel with all operating and control functions Analog temperature display for both heating plates Safety rip cord Rack compensation Main switch CE LOWER ELECTRIC HEATING PLATE NEW UPPER ELECTRIC HEATING PLATE NEW approx. 4 years ago

Year of construction: 2024, Condition: new, Functionality: fully functional, MOVE — the high-precision vacuum press with a gigantic usable area for vacuum shape bonding and vacuum veneering of curved workpieces. With extensive flexibility, due to absolute mobility and revolutionary folding mechanism, to reduce the floor space to 45 % when folded. Fge Ia Ultov Ulhwjteb High-precision vacuum press with flap opening incl. - Revolutionary folding mechanism (reduction of the floor space to 45 %) - 40 m³ high-performance vacuum pump (up to 900 mbar (9 t / m²)) - optional, automatic switch-off when pressure is reached (with large vacuum volume) - Pressure regulation 400 to 900 mbar, analog vacuum pressure gauge - Highly elastic natural rubber membrane (up to +130 °C) - Membrane fast-change system - Stable phenolic resin worktop (up to +120 °C), glued 15 times - Gas springs for flap opening - Vacuum pressure gauge - Connection for external vacuum bag - Smooth-running swivel castors - FESTO pneumatics and SIEMENS electrics Technical data and dimensions: - Usable area: approx. 3050 x 1350 mm - Overall dimensions: approx. 3700 x 1700 x 1100 mm - Overall dimensions (folded): approx. 3650 x 770 x 1780 mm - Dimensions inside the frame: approx. 3130 x 1430 mm - Voltage: 230 V - Power: 1,2 kW - Supply frequency: 50 Hz - Weight: 670 kg

Condition: excellent (used), Year of construction: 2007, Electric hot plate press ITALPRESSE Model: XL8 S 30-13 Dimensions of the heating plates 3000 x 1300 mm Number of heating plates 2 Number of shelves 1 Shelf opening 600 mm Heating plate design: Electric heating plates - gold anodized version Max. Max. temperature of the heating medium 120 degrees Installed electrical heating capacity approx. 25.0 kW Pressure cylinder: Total pressing force 1200 kN (120 t) Number of cylinders 8 Compact hydraulic unit made by HAWE Pump for closing phase and pressure build-up phase. Automatic pressure reset. Power of the hydraulic unit 3 kW ON/OFF key switch Illuminated push button for emergency reset (RUN) Electronic control unit with input terminal for controlling and monitoring the machine with the following functions: Digital timer for setting the pressing time. Digital input and monitoring of the pressing pressure. Digital diagnosis and display of fault messages. Safety devices: Two-hand release with safety circuit. Safety rip cord around the machine. Machine according to CE-NORM CE conformity declaration. Operating voltage: 400 V - 50 Hz, 3 Ph Fo Ia Uot Erfaslttjgb Dimensions L x W x H = 3650 x 2450 x 1730 mm Weight approx. 4500 kg

Condition: reconditioned (used), Year of construction: 1995, Pressing force [dN, kg] 650 - 3500 Maximum usable size [mm] 2500 x 1400 x 700 Minimum usable size [mm] 150 x 150 x 150 Travel speed [mm/sec.] 25 / 50 Working height [mm] 350 Total weight [kg] 2600 Connected load [kW] 5 Rated current at 400 V / 50 Hz [A] 10 Space requirement (l x w x h) [mm] 4600 x 850 x 2350 Drive via 4 ball screws Synchronous pressing process via proximity switch Manual control via control switch for 8 movement functions Independent pressure adjustment of horizontal and vertical pressing pressure Pressing force infinitely adjustable from 650 to 3500 kg per pressure wall Automatic opening Safety rip cord Machine feet CE Note on used machines: Fe Ia Ulovgypyettogb - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).