Used Stripping equipment for sale
4
Multi-purpose cable stripper. To be completely reconditioned
Br20pvj0
6
Permanent magnet belt. (unused)
Mkacuk3b
Brand : Bakker Magnetics
Block : L= 835 x W=610 x H=247 mm.
Length frame A.A.= 1500 mm.
Belt width : 600 mm.
Drive : drum motor 1.5 kW.
4
Magnetic tape, overbelt magnetic separator, magnetic filter, lifting magnet, overbelt magnet
Permanent overbelt magnetic separator
TYPE PEM2200
2200x1000x400mm
=====
4x ring screw for suspension
Magnet dimensions: 1200x500x180mm
PU conveyor belt with hard cover, matt black
Inner bearing lubrication for 10,000 operating hours.
Degree of protection: IP-65
Three-phase gear motor GEMOTEG 1.1KW
Cladding: RAL 5015
Qbrt9
Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnet...
6
Manufacturer: Steinert
Type: UME 155 160 P
Magnet L x W: 1.600 x 1.550mm (100% ED Magnet)
Fn788l9
AA.: Ca. 2.700 mm
Belt widthness: 1.600 mm (New)
151V. DC. / 62,4 A.
Weight: 9.400 Kg
With new Transformer-rectifier of 380V. Primary.
2
Sesotec Varisort M1536
Reliable detection and sorting of metals by means of conductivity sensor and blow-out nozzles
2itnbyd9
For sale is a magnetic separator from the processing of ferrous slags. Consisting of a feed hopper for wheel loader feeding, a conveyor belt to the overbelt magnet, a dump discharge belt for the inert fraction and a sieve to screen out fines from the magnetic fraction. The machine has been used for years to separate ferrous slag from iron without difficulty. After the process, three fractions are produced (dew mineral, fine iron and coarse iron). The machine is located in Dortmund. A potential b...
Cable stripper 2 in 1
Ground cable stripper from 40mm up to 120 mm
House cable stripper 3-38 mm
1 phase 220V
Etjpphox0
6
ERIEZ Permanent Magnet Belt
Brand : ERIEZ
Length frame A.A.= 2000 mm , Belt width : 950 mm
Block : L=1150 x W=770 x H=450 mm
Power requirement : 1,5 kW slip-on gearbox
Cabtab8abo
4
Magnetic tape, overbelt magnetic separator, magnetic filter, lifting magnet, overbelt magnet
Permanent overbelt magnetic separator
TYPE PEM1600
1600x1000x400mm
=====
4x ring screw for suspension
Magnet dimensions: 600x500x180mm
PU conveyor belt with hard cover, matt black
Inner bearing lubrication for 10,000 operating hours.
Degree of protection: IP-65
Three-phase gear motor GEMOTEG 1.1KW
Cladding: RAL 5015
Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic sepa...
3
Steinert UMS 45 130 140
– 8,3kW / 67A. / 124V.
– 100% E.D. Magnet L x W: 1.406 x 1.350mm
– Conveyor Belt: 1.400mm
– AA.: Ca. 2.300mm
– Weight: 6,4 Tons
Cwmlg2t2
– Transformer rectifier of 380V. Primary
4
Copper Cable Stripping Peeling Machine from 1mm to 88mm and Chrushing and Steel Air Line Wire Drawing feature.
Brand New and never used. Excellent machine from an excellent manufacturer.
Bqmet07k
4
The Euro-strip 500 is one of the smallest in the range and is low energy, a large capacity unit that is easy to move around a yard.
2xnlk2dv
4
Overband magnet / magnetic separator
Qh9uf
Motor: 1,1kW
belt width: 400mm
Total width incl. motor: 800mm
Total length: approx. 1350mm
4
Permanent Magnet Block (unused)
Brand : LKoreman
Block : length 1200mm, width 850mm, height 320mm.
Enftcbj
Heavy Duty
In stock : 2 pieces
2
Overband plate magnet
Version in VA 1.4301 tightly welded
Bd7sdzkgvx
620 x 420 x 250mm
completely welded housing
Ring eyelets for suspension
1
Power: 7,8 kW.
Amperage: 52 A.
Bypcxs0p0k
Voltage: 150 V.
100% ED Magnet L x W: 1.780 x 1.380 mm.
Conveyor belt: 1.400 mm.
AA. : Ca. 2.800 mm.
With transformer rectifier of 380V. primary.
Overband separator will be overhauled, sandblasted, painted.
10
Diameter: 160mm
Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request.
Vi2zo
Very stable industrial design.
Ideal for separating nails/metal parts from material flows.
For example after a wood shredder.
including 3 extremely powerful magnets
* If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 €
- Neodymium magnets are also available instead of ferrite for an additional charge
Your adv...
Maximum Cable Diameter : Ø 90mm
Minimum Cable Diameter : Ø 5mm
Cutting Speed : 10 m / min
Cpkcxjce
Electric Motor Power : 4 kW
Machine Dimensions : 70cm x 131,5cm x 119cm
Machine Weight : 460 kg
MİZAR S series are designed to strip and remove the outer covering material of any cable exposing the internal material. MİZAR cable stripper machine can easily strip and remove the outer covering material of any size cable. Including: Steel Wired Armoured cables (SWA), double steel wired armoured cables, steel tapes, PVC covered cables, lead covered cables, thick rubber covered cables, nylon covered cables, low-grade cables, TT cables and more provide excellent performance. Rotors feed with hyd...
4
Permanent Magnet Block (unused)
Brand : Bakker Magnetics
Cabstrmtye
Block : length 835 mm, width 610 mm, height 247 mm.
Weight : 580 kg.
Stock : 2 pieces
2
Permanent overband magnetic separator
Bdvdouoyrr
TYPE PEM1800
1800 x 1000 x 400mm
=====
4x eyebolt for suspension
Rubber band GB30
Magnetic dimensions: 800x500mm
1
“SGM CEM TMP 50 / 160 HG” for Sale
Manufacturer: SGM
Type: CEM TMP 50/160 HG
L x Dia.: 1.600 x 500mm
Povdt
Included:
– Electrical Motor (SEW / 1,5 kW – 26 RPM)
6
IFE Electro Magnetic Belt
Brand: IFE
Length frame A.A.= 2300 mm
Belt width : 800 mm
This magnet has 2 magnet blocks;
*nr1= main magnet block, type elektro
block : L= 950 x W=900 x H=650 mm
power requirement : 3,5 kW
*nr2= auxiliary magnet block , type permanent
block : L= 550 x W=620 x H=190 mm
Drive : 2 kW slip-on gearbox
Rectifier included.
Cabtz9ujqf
2
Overband plate magnet
Version in VA 1.4301 tightly welded
Bd7sdpzbbw
620 x 420 x 250mm
completely welded housing
Ring eyelets for suspension
1
Manufacturer: Steinert
Type: UME 95 110 R
Steinert UME 95 110 R
4,1kW / 43,3A. / 94,4V.
100% E.D. Magnet L x W: 1.080 x 940mm
Pmcqz
Belt: 1.000mm (new)
AA.: Ca. 1.900mm
New transformer recitifier 380V. Primary
6
Krupp Electro Magnetic Belt, Heavy Version
Cabuah39u0
Block : L= 1650 x W=1200 x H=600 mm
Power requirement block = 7,7 kW
Power requirement drum motor = 5,5 kW
belt width : 1400 mm - A.A. 3200 mm
Speed : 2,5 mtr./sec.
Rectifier included (new)
Weight about 7500 kg
Stock 3 pieces
4
For sale is a magnetic filter system with automatic cleaning system.
Filter systems of this type are usually made to order only by customers individually.
This system is an exhibition purpose, which served only for demonstration, and was hardly in use.
product benefits
Installation in existing production lines possible
Separation of any ferrous metal contaminants
Very corrosion resistant
High resistance to wear
Compact design
Low maintenance
Ni0wl
Technical details
- 400 x 400 x 390mm
- Inl...
1
“Wagner 451-130/160-600” for Sale
With transformer from 380 V. AC to 220 V. DC.
Manufacturer: Wagner
Type: 451-130/160-600
Power: 10,9/7,2 KW.
Amperage: 49,3/32,5 A.
Voltage: 220V.DC
Magnet L x W: 1.600 x 1.300 mm.
Conveyor belt: 1.400 mm.
AA. : 2.530 mm.
O0xgf
8
Lenoir Electro Magnetic Belt
Dim. Block : L= 1250 x W=1000 x H=400 mm
Qida7
Dim. Conveyor belt : A.A.= 2000 mm
Belt width : 1000 mm
Drive: 2 kW slip-on gearbox
Rectifier included
1
Overband plate magnet
Version in VA 1.4301 tightly welded
Imakrumpm
600 x 400 x 200mm
completely welded housing
Ring eyelets for suspension
2
“3 Pcs. Steinert UMS 44 130 140 SOND” for Sale
Find our complete stock on our website.
Manufacturer: Steinert
Type: UMS 44 130 140 SOND
14kW / 63,58A. / 220V. – 100% E.D. Magnet L x W: (1.400 + 2 x 420=) 2.240 x 1.360mm – Conveyor Belt: 1.400mm – AA.: Ca. 2.900mm – Weight: 11 Tons – Transformer rectifier of 380V. Primary
Bsq8hbfe0c
5
Permanent magnet belt (unused)
Brand : LKoreman
Block : L= 1200 x W=850 x H=300 mm
Length frame A.A.= 1900 mm
Mltbnm7m
belt width : 800 mm
drive slip-on gear 1,5 kW
Speed 1.6 m/sec
3
Permanent overband magnetic separator
TYPE PEM2000
Gb8onjrz
1800 x 1000 x 400mm
=====
4x eyebolt for suspension
Rubber band GB30
Magnetic dimensions: 800x500mm
6
Electro magnet block.
Brand: Krupp.
Mlmzewyx
Block : L= 1650 x W=1200 x H=600 mm.
Power requirement block = 7 kW, 35 Amp.
Weight about 3,5 - 4 tons.
Rectifier included (new).
1
Permanent overband magnetic separator
TYPE PEM1600
1600 x 1000 x 400mm
=====
4x eyebolt for suspension
Rubber band GB30
Gbypvzbf
Magnetic dimensions: 600x500mm
6
ERIEZ Permanent Magnet Belt
Djnf87r
Brand : ERIEZ
Length frame A.A.= 1600 mm , Belt width : 750 mm
Block : L= 830 x W=500
Power requirement : Hydroliek motor
1
Permanent overband magnetic separator
TYPE PEM1600
1600 x 1000 x 400mm
=====
Hpxi9ne
4x eyebolt for suspension
Rubber band GB30
Magnetic dimensions: 600x500mm
5
Electro magnet roller
Brand : Wagner
RollersLength 900 mm , Ø 800 mm.
Power requirement magnet 1,6 kW.
Including rectifier.
Cabw7hl08s
4
Dimensions: 450x280mm
H8jzgsv
Inlet / outlet Ø 320mm
5 pieces magnetic filter rods
Filter systems are used for the final separation of the finest iron metal impurities.
Examination of Schuettguetern
Universally applicable in pipe systems, funnels and chutes
Easy handling and cleaning
Iron particles are safely filtered out of the bulk material when passing through the grilles.
In addition, this elaboration provides easy cleaning of the staves.
The filter system can be removed from the sheat...
6
BAMAG Electro Magnet Belt
Dim. Conveyor belt : A.A.= 1800 mm
Belt width : 800 mm
Drive: 3 kW slip-on gear
Dim. Block : L= 1050 x W=1100 mm
Power requirement : 4,5 kW
Rectifier included.
Qic3h
5
For sale is a magnetic filter system with integrated cleaning system.
Filter systems of this type are usually made individually to order from customers.
In this system, there is an exhibition purpose, which only served to show, and was hardly in use.
product benefits
Installation possible into existing production lines
Separation of any ferrous metal contaminants
Very corrosion resistant
High wear resistance
Compact design
Low maintenance
Technical details
- 400 x 400 x 390 mm
...
1
Overband plate magnet
Bdvegy8aic
Version in VA 1.4301 tightly welded
2000 x 1200 x 350mm
completely welded housing
Ring eyelets for suspension
1
Overband plate magnet
Version in VA 1.4301 tightly welded
1200 x 520 x 200mm
completely welded housing
Gctj9tl9
Ring eyelets for suspension
1
Overband plate magnet
Version in VA 1.4301 tightly welded
600 x 400 x 200mm
completely welded housing
Ikrszx8
Ring eyelets for suspension
1
Overband plate magnet
Version in VA 1.4301 tightly welded
620 x 420 x 200mm
completely welded housing
Ring eyelets for suspension
2rd0p3
4
Permanent overband magnetic separator
TYPE PEM1400
1400 x 700 x 400mm
=====
4x eyebolt for suspension
GB30 elastic band
Magnet dimensions: 600x340x180mm
Inner bearing lubrication for 10,000 operating hours
Degree of protection: IP-65
Three-phase gear motor GEMOTEG
Covering: RAL 5015
Magnetic core set in soft iron, so that a
very high permeability can be guaranteed.
Underbody tightly closed and sealed with stainless steel plate and pole pieces.
Dh9t8jv7
2 demonstration systems immediately avai...
1
Overband plate magnet
Version in VA 1.4301 tightly welded
420 x 250 x 100mm
completely welded housing
Ring eyelets for suspension
W0aig
2
Permanent overband magnetic separator
TYPE PEM2000
2000 x 1000 x 400mm
=====
Ni0rv
4x eyebolt for suspension
Rubber band GB30
Magnetic dimensions: 1000x500mm
2
Overband plate magnet with cleaning mechanism
execution in VA 1.4301 tight welded
incl. drawer for cleaning
dimensions:
800x500x180mm
4 - pieces M16 eyebolts on the backside
These two lifting magnets were used by one of our customers as "police magnet" in the meat processing industry.
Both overband magnets are in a perfect condition.
The mentioned price refers to 1 piece.
Currently still 2 pieces available from stock!
All information without guarantee, only while stocks last!
conveyor belt, con...
2
Plate magnet in NdFeB Neodymium version
260 x 104 x 41.5mm
Completely welded housing
4 tapped holes M8x20mm
3bgeud2pi
Edge distance: 40mm
-BHmax: 263-279 kJ / m³
Br: 1170-1210, JHc:> 955KA / m
Maximum operating temperature: 80 ° C
This is an overproduction which has not been accepted by the customer. More than 10 pcs.
