Condition: used, Year of construction: 2006, Functionality: fully functional, total width: 1,900 mm, total height: 1,800 mm, total length: 2,500 mm, briquette diameter: 80 mm, overall weight: 2,400 kg, type of input current: three-phase, oil tank capacity: 600 l, – after technical inspection – Italian production – year of production 2006 – DTR TECHNICAL PARAMETERS: – briquette Ø: 80 mm Fjbvm Rjv T Uphozgjpg – max. briquette length: 80 mm – efficiency: 350 kg/h – engine power: 27.5 kW – hydraulic crush: 1400 kg/cm2 – max. operating force: 150 bar – oil capacity: 600 l – container diameter: Ø 1200 mm – container height: 90 cm – dimensions (length/width/height): 2500 x 1900 x 1800mm – net weight: 2400 kg

Year of construction: 2013, Condition: excellent (used), Vacuum press (for 3D film coating, layer gluing, shaped veneering) Fsbvm Rzerxvaxegjpg - Mobile table with swivel-up heating hood incl. film sealing frame - VT 4.80 high-performance vacuum pump, final pressure max. 900 mbar (9 t/m²), suction capacity 80 m³/h - Pneumatic liftable foil sealing frame - incl. highly elastic silicone membrane (transparent) - aluminum heating hood, fully insulated, continuously adjustable from 0 to 140 °C - The system is maintenance-free, the vacuum pump must be serviced - heating capacity: 13.5 kW, 400 V, 50/60 Hz, with 3 air circulation fans - incl. pneum. Opening and closing mechanism for opening the sealing frame and the heating hood - incl. semi-automatic process control External dimensions: approx. 3500 x 1600 mm Usable area: approx. 2880 x 1280 mm Heating station (for all thermoplastic materials) - Effective area: approx. 2550 x 1150 mm - Insertion thickness, infinitely variable 0 - 70 mm - Heating power: 13.5 kW, 400 V, 50/60 Hz, 32 Amp., with 3 air circulation fans (overheating protection) - Infinitely variable temperature preselection up to + 200 °C - Electronic temperature control - Extendable support surface with grid, 30 x 30 mm grid stainless steel perforated plate 2 mm, perforation 5 mm, dimensions: approx. 2000 x 1000 mm, Membrane change system incl. high-quality natural rubber membrane

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, machine/vehicle number: 3294, motor voltage: 400 V, type of input current: three-phase, power: 90 kW (122.37 HP), type of motor: three-phase motor, We are selling line from Nova pellet, 2019 production and 2020 first year of production start. -Pellet press N-MIDI 90 KW 12.500 hrs(very good and daily maintaince, 2025 new rollers and die, 200 hrs old Main tooth-belt)-2019 year -Transporting vertical elevator ca 10m height-2019 year -Cooling tower N-CO700-2019 year -Control cabinet-NEW UNUSED -Heavy duty hammermill Miller M16(37kW electric engine)-NEW UNUSED Fpsbvm Rjwahhcjzgsg We are selling only items above(without cyklon, filters etc.)! Line is in very good condition and had very good daily maintaince. For further informations, please write or call on our contact.

Year of construction: 2022, Condition: new, CODEX 150 is equipment for the production of lath panels, glued laminated beams, window frames and beams for building construction. The range of machines differs in construction sizing and thus in working capabilities The entire CODEX range of clamps consists of: - double-acting hydraulic pump; - hydraulic-pressure, sliding front aligner units for positioning under pressure and facilitating loading and unloading. - Hydraulically pressurized, manually positionable upper presser assemblies. - Movable lower mast support axes, adjustable to 5 positions - movable control box. CODEX 150(200) 6200 MAX working dimensions 6200x1200x150 Hydraulic upper pressors No. 12 Upper presser plungers diameter 63 mm Upper pressors stroke 200 mm Frontal aligners No. 6 Upper presser pistons diameter 50 mm Frontal pressors stroke 165 mm Upper pushing pressure 750÷5000 kg Aligners thrust pressure 400÷1500 kg Specific pressure adjustable 5÷15 kg/cm2 Hydraulic power unit motor power 1.5 Kw Fpsbvm Rzolxy R Segog Machine net weight 3800 kg

Year of construction: 2023, Condition: new, OMC PL 105 LC 30/13 Water-based veneering press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Maximum heating temperature of 85 degrees Fsbjiypzljvm Rzgopg Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2023 Machine available on request New machine

Condition: used, Year of construction: 2007, Functionality: fully functional, power: 160 kW (217.54 HP), Pellet processing machine line with KUKA packaging robot. Febvm Rzev Uh Utegspg

Condition: used, Year of construction: 1972, Functionality: fully functional, Brand: Höfer Type: H-65 Year of manufacture: 1972 Machine No.: 1191/72 Total pressing force: 65 tons Cylinders: 4 Safety ripcord: yes Fpsbvov Uafqem Rzgog Heating platen format: 2,250 x 1,250 Heating plates: Electric, aluminum Operating manual + wiring diagram included All information is provided without guarantee, sold as is

Condition: ready for operation (used), Length of the folding shutters up to 3000 mm Width of the folding shutters up to 700 mm Vertical pressure adjustable up to 8000 kg Fpsbvmoh Nui Ne Rzgjg Horizontal pressure 2500 kg

Condition: excellent (used), BOSCH PNEUMATIC CYLINDER DIAM. 160 / 1200 MAX. PRESSURE 10 bar Available: 2 UNITS Fjbvmjiu U U Ss Rzgopg

Condition: good (used), Year of construction: 1995, machine/vehicle number: 0243 / 25634, total height: 2,600 mm, total length: 100,000 mm, total width: 1,000 mm, pressing force: 120 t, Ocmac automatic throughfeed carcass press KOPR CC-EL Manufacturer OCMAC s.p.a. Italy ( acimall) S/N 0243 / 25634 year of construction 1995 Hydraulic self-adjusting electronic carcase press for the assembly of furniture. Automatic feeding of the workpieces Technical data: Max. usable mass: Length 2300mm width 600mm Height 1500mm Min usable dimensions: Fpjbvm Rzsqai H Togog Length 500mm Width 300mm Height 200mm Feed rate of the conveyor belt: 2,4-12M/min Closing time of the press 20-40 seconds Installed power 11.5 kW Max pressure: 120 bar Voltage: 380 V , 50 hz Net weight 4500 kg

Year of construction: 2022, Condition: new, OMC 3000×1300 105T Oil Shelf Press Working surface 3000x1300mm Opening width 400mm 6 cylinders with a diameter of 85mm Total pressure 105T Fobvoimwp Sjm Rzgopg Maximum heating temperature of 85 degrees Control system logic contorl Machine control from touch panel readouts Temperature, pressure force, shelf opening time, loading area calculator, glue process programming Power 21KW CE certificate Production 2022 Machine available on request New machine

Condition: used, Year of construction: 1990, used manufactured by Steton type SOPE built in 1990 cylinder horizontal 3 cylinder vertical 3 working width 3050 mm working height 2050 mm hydraulic required space ca. l x w x h mm 4100 x 1300 x 2600 weight ca. 1500 kg Fjbvsvwfa Eom Rzgspg total connected power 2.2 kW located in 97447 Gerolzhofen sale in current condition

Condition: new, Year of construction: 2025, Sample - production on customerdemand: Press area: 3000 x 1350 mm No. of cylilnders: 6 pcs. Diameter of cylinders 85 mm Specific pressure: 3,7 kg/cm² (with 350 bar), based on 80 % of the press area Fjbvm Rjdq E A Eszgspg Press force: 12 - 120 TO Max. operating temperatur: 120°C Heating power: 230/400 V, 10,9 kW / heating plate, separately adjustable Stroke / opening: 400 mm Closing / opening speed: approx. 20 mm/sec Working height: ~900 mm Belt speed: max. 15 m/min

Condition: refurbished (used), Year of construction: 2001, Functionality: fully functional, height adjustment type: hydraulic, motor voltage: 380 V, type of input current: three-phase, ambient temperature (min.): -20 °C, ambient temperature (max.): 40 °C, overall weight: 8,000 kg, power: 250 kW (339.91 HP), type of motor: three-phase motor, warranty duration: 6 months, Refurbished pellet press for all applications Rollers and die new, suitable for the product to be pressed. Roller distance control, type Distamat, adjustable in mm. Central lubrication on the rollers Febvm Rsv Rbw Hozgjpg Viewing possible

Condition: excellent (used), Technical data: Number of pistons: 6 Piston diameter: 800 mm Connection to central heating Shelf dimensions: 1300 x 3000 mm Clearance: 300 mm Hydraulic pressure Safety switch Power supply: 380 V Overall dimensions: Length: 3400 mm Width: 1400 mm Height: 1710 mm Fpjbev T Uv Ievm Rzgsg

Condition: like new (used), Functionality: fully functional, A Rollerhead and Hydraulic nut for the Amandus Kahl C35-780 machine in almost perfect state, these parts have only been used for a year to produce sawdust pellets. Fpsbvm Rsv N N Evezgeg

Condition: used, Year of construction: 1972, used veneer press Joos Model HP 65/1 year of construction 1972 pressing area 2200 x 1100 mm heating plates gold anodized connected load heating approx. 14 kw Opening width 300 mm Pressing pressure max. 65 t. Fpobvm Roukr Tzjzgog 4 cylinders Weight approx. 2500 kg Dimensions approx. LxWxH 2700x1500x1800 mm

Year of construction: 2009, Condition: used, SECOND-HAND VERTICAL HYDRAULIC CLAMP FOR SOLID WOOD PANELS STROMAB MOD. SL1 - CE RULES - Volt. 400/50 Fjbvmjmzbk De Rzgspg - Year 2009

Condition: used, Functionality: fully functional, Year of construction: 1976, - Usable size 2500 x 1500 x 700 mm - Various vertical and horizontal pressure elements - Max. 800 dN (kg) per pressure element - Drive: 2 electric motors, 0.75 kW each - Weight: 1600 kg - Space required: 3500 x 800 x 2420 mm (L x W x H) Fsbvm Rov Uac Nszgopg - Operating instructions included ATTENTION: No programmable control - brochure does not exactly match the machine All information is provided without guarantee, sold as seen.

Condition: ready for operation (used), hydraulic veneer press Fsbvmovx Rtyo Rzgjpg 2500 x 1100 mm with electrically heated plates

Condition: good (used), Functionality: fully functional, hydraulic frame press - Working width 3500 mm - Working height 3000 mm Febsvyh Abjvm Rzgepg - 3 vertical, 2 lateral pressure cylinders - Motor 2.2 kW

Condition: used, In good condition Workbench area 2450x1000 mm Number of pressed parts: 3 Fobsq Tn Nuovm Rzgspg The area of the pressed part is 800x1000 mm Maximum working height 500 mm Transport dimensions 2700x1000x1800 mm Weight 1055 kg Price 1100 Eur (EXW Jonava, Lithuania)

Condition: excellent (used), plate length 3300mm plate width 1300mm 3 inserts 8 hydraulic pistons pistons diameter 80mm safety switch water heating solid steel plates Fpsbvoma Hwdsm Rzgsg

Year of construction: 1999, Condition: used, SECOND-HAND CLAMP COUPLE FOR CHAIR ASSEMBLY CAMAM MOD. SIPM TTS - CE (1999) - Hydraulic pump power HP 5.5 (kW 4.0) Fsbvsimbvhjm Rzgspg - productivity 60-120 assambled chairs/hour - Dimensions mm 3500x1300x2200 H - Weight kg 2060 - CE rules - Year 1999

Condition: ready for operation (used), Year of construction: 1992, electro-hydraulic frame press heavy-duty design Fpobevx Rtmevm Rzgog pressing force max. 3000 kp per cylinder with quick adjustment of the cylinders using a hole pattern 3 cylinders vertically, 2 cylinders horizontally pressing force adjustable up to max. 3000 kg per cylinder