Condition: excellent (used), Year of construction: 2013, KRAUSSMAFFEI KM 1300-12000 MX + LRX 350 ROBOT Year of manufacture: 2015 | Clamping force: 1300 tons | Control: MC6 Hydraulic injection molding machine KraussMaffei KM 1300-12000 MX from 2015, equipped with a KraussMaffei LRX 350 linear robot. The machine features a two-platen hydraulic-mechanical clamping system, an abrasion-resistant plastification unit, and an MC6 control system with a 19-inch touchscreen. TECHNICAL DATA 1. CLAMPING UNIT Clamping force: 13,000 kN / 1300 tons Clamping system: hydraulic-mechanical, two-platen Design: 4 tie bars and 4 adjusting units Mounting plate dimensions: 2210 × 1910 mm Tie bar spacing: 1570 × 1270 mm Opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN 2. INJECTION UNIT Unit type: 12000 Preds Af Ndqopfx Abaoc Screw diameter: 105 mm Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection pressure: 2296 bar Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plastification rate (PS): 130 g/s Abrasion-resistant plastification unit PV injection unit adjustment 3. KRAUSSMAFFEI LRX 350 LINEAR ROBOT Manufacturer: Krauss Maffei Model: LRX 350 Type: linear, servo-driven robot Payload: up to 35 kg Part removal on the side opposite the operator Range of motion: X-axis: 1200 mm Y-axis: 1000 / 1000 mm (telescopic) Z-axis: 3500 mm Drives for X, Y, Z axes: servo 4. CONTROL SYSTEM KraussMaffei MC6 19" color touchscreen Industrial computer Real-time Ethernet communication ProcessDesigner process visualization Machine diagnostics Adjustment and monitoring of injection parameters 5. HYDRAULIC AND ELECTRICAL SYSTEM Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 l 6. DIMENSIONS AND WEIGHT Length: 13,650 mm Width: 3650 mm Height: 2820 mm Machine weight: approx. 70,000 kg / 70 tons

Condition: used, functionality: fully functional, For sale: Motan METRO HES 50 vacuum conveyor for granules, designed for transporting plastic granules, including feeding injection molding machines. The unit is equipped with a stainless steel tank, an integrated suction unit, and an electronic control panel with a digital display. Technical data according to the nameplate: Manufacturer: motan GmbH Prede Afy Rgspfx Abaec Model: METRO HES 50 Power supply: 230 V, single-phase, N and PE Frequency: 50/60 Hz Power consumption: 1.1 kW – 1100 W Current draw: 4.8 A Control voltage: 24 V DC / 230 V AC Protection: 10 A, time-delay Country of manufacture: Germany CE marking Condition: used, visible signs of wear. The set includes the unit with the control panel, cables, and connectors as shown in the pictures. The scope of sale corresponds to the pictures.

Condition: excellent (used), Year of construction: 2013, KRAUSSMAFFEI KM 1600-17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 Clamping force: 16,000 kN (1,600 tons) Control system: KraussMaffei MC6 TECHNICAL SPECIFICATIONS 1. Basic data - Manufacturer: KraussMaffei - Model: KM 1600-17200 MX Blu Power - servo - Year of manufacture: 2013 - Machine type: hydraulic injection molding machine for processing thermoplastic materials - Clamping system: fully hydraulic - Clamping force: 16,000 kN (1,600 tons) - Injection unit: 17200 - Control system: KraussMaffei MC6 2. Clamping unit - Clamping force: 16,000 kN (1,600 tons) - Opening force: 1,120 kN - Dimensions of the mounting plates (H × V): 2,550 × 2,100 mm - Column spacing (H × V): 1,870 × 1,420 mm - Opening stroke: 2,700 mm - Minimum mold height: 700 mm - Maximum mold height: 1,600 mm - Maximum daylight: 3,400 mm - Ejector stroke: 350 mm - Ejector force (forward / backward): 300 / 150 kN 3. Plasticizing unit - Complete plasticizing unit for thermoplastics - Screw diameter: 135 mm - Screw length ratio L/D: 23 Psdpfx Ae Af I U Nsbajrc - Plasticizing unit in abrasion-resistant version - Screw check valve - Open nozzle 4. Injection unit - Injection unit type: 17200 - Screw diameter: 135 mm - Injection volume: 9,662 cm³ - Injection shot weight (PE): 6,860 g - Maximum injection pressure: 1,784 bar - Nominal screw speed: 81 rpm - Maximum screw speed: 100 rpm 5. Hydraulic and electrical system - Main motor power: 160 kW - Installed heater power: 93 kW - Number of heating zones: 7 - Number of dry cycles according to EUROMAP 6: 648 cycles/h - Hydraulic oil tank capacity: 2,400 l 6. Machine dimensions and weight - Length: 14,170 mm - Width: 4,040 mm - Height: 2,930 mm - Net weight including control cabinet: 92,000 kg (92 tons)

Condition: used, Year of construction: 2015, Moretto OTX 600VP_Moretto drying hopper for plastic granulate, with a heating unit and accessories. (2015) Professional industrial drying hopper Moretto OTX 600VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air heater, hopper loader, and suction valve, this complete unit ensures optimal moisture removal and consistent material preparation prior to injection moulding or extrusion processes. Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) Prede Af Im Tspfx Abaoc 2. Hopper Model: OTX 800VP 3. Year of Manufacture: 2015 4. Hopper Capacity: 800 litres () 5. Dry Weight (Hopper): 386 kg Integrated Components & Modules: 1. Air Heater Unit: 2. Model: Moretto HG 12V125X 3. Heating Power: 12.5 kW 4. Voltage / Frequency: 400 V / 50 Hz 5. Heater Weight: 60 kg 6. Hopper Loader / Receiver: 7. Model: Moretto R25 C52 8. Voltage: 24 V DC 9. Power: 0.011 kW 10. Loader Weight: 17 kg 11. Suction Valve: 12. Model: Moretto AV3550I 13. Valve Weight: 11 kg

Condition: excellent (used), Year of construction: 2011, KRAUSSMAFFEI KM 850-12000 MX injection molding machine Year of manufacture: 2011 Prsdpo Af H Imjfx Abaec Clamping force: 8,500 kN (850 tons) Control system: MC5 Robot: KraussMaffei LRX 500 TECHNICAL SPECIFICATIONS 1. Clamping unit - Clamping system: hydraulic-mechanical, two-platen - Design: 4 pressure pads and 4 locking units on the moving platen - Clamping force: 8,500 kN (850 tons) - Opening force: 560 kN - Column spacing (H × V): 1,140 × 1,140 mm - Dimensions of mounting platens: 1,600 × 1,600 mm - Opening stroke: 1,600 mm - Minimum mold height: 500 mm - Maximum mold height: 1,100 mm - Maximum die opening: 2,100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN 2. Plastification unit - Complete plastification unit for thermoplastics - Screw diameter: 135 mm - Backflow valve: yes - Nozzle type: open - Nozzle radius: 25 mm - Nozzle orifice diameter: 9 mm 3. Injection unit - Injection unit type: 12000 - Injection unit adjustment: PV - Screw diameter: 135 mm - Injection volume: 8,588 cm³ - Injection shot weight (PS): 6,098 g - Maximum injection pressure: 1,389 bar - Injection rate: 1,414 cm³/s 4. Hydraulic and drive system - Rated motor power: 132 kW - Hydraulic oil tank capacity: 2,440 l - Cycle time according to EUROMAP 6: 965 cycles/h 5. Control system - Control system: KraussMaffei MC5 - Color operator monitor - Integrated control panel - USB port for data carrier operation 6. KraussMaffei LRX 500 linear robot - Manufacturer: KraussMaffei - Model: LRX 500 - Type: linear robot - Z-axis: 4,000 mm - X-axis: 1,500 mm - Y-axis: 1,250 / 1,250 mm 7. Machine dimensions and weight - Length: 11,720 mm - Width: 2,920 mm - Height: 2,710 mm - Net weight including control cabinet: approximately 49,000 kg (49 tons) Additional equipment - KraussMaffei LRX 500 linear robot - Two-platen hydraulic-mechanical clamping system - MC5 control system - PV adjustment of the injection unit - Plastification unit for thermoplastics with a 135 mm screw

Condition: used, Year of construction: 1999, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Prodpfx Aj Agk Drsbaec You can find this and many other items on our platform.

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Type: Luxor LA/8-200 Connection value: 6 kW Dry air flow rate: 200 m3/h Silos for granules: 1 x 150 L 4 x 60 L Prsdpsyvfkrofx Abajc Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 6750 TO 6000 EUR!!!

Condition: used, Year of construction: 2015, Moretto OTX 360VP_drying hopper system (2015) Professional industrial drying hopper Moretto OTX 360VP designed for efficient pre-heating and drying of plastic granulates. Equipped with an integrated air heater and suction valve, this compact unit ensures optimal moisture removal and consistent material flow prior to injection moulding or extrusion processes. Technical Specifications: 1. Manufacturer: Moretto S.p.A. (Italy) 2. Hopper Model: OTX 360VP 3. Serial Number: OP. Year of Manufacture: 2015 5. Hopper Capacity: 360 litres () 6. Dry Weight (Hopper): 133 kg Integrated Components: 1. Air Heater Unit: 2. Model: Moretto HG3V90X 3. Serial Number: 1515357 4. Heating Power: 3.1 kW Prjdj Af Na Hopfx Abaoc 5. Voltage / Frequency: 230 V / 50–60 Hz 6. Heater Weight: 20 kg 7. Suction Valve: 8. Model: Moretto AVIC50 9. Serial Number: OP. Valve Weight: 3.12 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 800 kg, power: 19.5 kW (26.51 HP), tank capacity: 200 l, volume flow: 350 m³/h, Dry air dryer with granular material silo and material separator Psdpfjx Na Itex Abaorc Manufacturer: Piovan Type: DSN521NE No.: ODE 6242 4 insulated granular material silos, each with a capacity of 200 L Equipped with an additional heater Material separator, 3 units Manufacturer: Colortronic This system has been inspected for all functions and is fully operational! PRICE REDUCED FROM 6200 TO 5500 EUR!!!

Condition: good (used), Year of construction: 2011, operating hours: 48,060 h, clamping force: 35 kN, screw diameter: 18 mm, clearance between the columns: 32 mm, displacement volume: 23 cm³, injection weight: 21 g, SUMITOMO shi-Demag Systec 35/320-25 Closing force: 35 tons Year of manufacture: 2011 Tie bar diameter: 18 mm Tie bar spacing: 32x32 Mounting height: 320 mm Prsdpfx Abj Agpcqeaoc Operating hours: 48,060

Condition: used, functionality: fully functional, For sale: KOCH TECHNIK MIKO vacuum conveyor for transporting plastic granules. The device is designed for the automatic feeding of injection molding machines, extruders, and other processing machines. Data from the nameplate: * Manufacturer: Werner Koch Maschinentechnik GmbH * Model: MIKO * Serial number: GD1576 * Power supply: 230 V * Date of manufacture: 12-16 * Country of manufacture: Germany Equipment: * Integrated suction unit. * Control panel with digital display and time adjustment. * Transparent tank for observing the material. * Side connection for connecting the transport hose. Podpfx As Afy Tgobaerc * Pneumatic solenoid valve. * Lid with snap-on fasteners. * Mounting base. * Power cord with plug. Condition: used, visible signs of wear as shown in the photos.

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 61037303, clamping force: 1,600 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,564 bar, injection weight: 432 g, mold height (min.): 500 mm, ejector force: 3,300 N, ejector stroke: 175 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 6,100 mm, total width: 1,710 mm, total height: 1,950 mm, overall weight: 8,400 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 520 mm, tool weight: 14,000 g, Injection molding machines directly from the manufacturer! As the manufacturer, KraussMaffei offers you our tested and versatile machines in stock: The fully electric PX series is the answer to your demands for greater flexibility combined with increasing productivity. Robust mechanics, highly precise and dynamic drive technologies, and intelligent energy management make the PX a reliable, productive, and efficient workhorse in any injection molding operation. An ergonomically optimized working height, maximum clearance under the mold, and excellent accessibility ensure maximum operator convenience. The PX series stands out due to its flexibility throughout its entire service life. TECHNICAL DATA: KM 160 / 750 PX G02 (Order 38621981) CONTROL  MC6 with 21.5" TFT color touchscreen and multi-touch function CLAMPING UNIT  Clamping force kN 1600  Mold opening force, max kN 240  Mold opening (h x v) mm 520 x 470  Platen size (h x v) mm 710 x 660  Mold height min. - max. mm 200 – 500  Opening stroke mm 850  Max. mold opening stroke mm 450  Ejector drive Hydraulic  Ejector stroke mm 175  Ejector force forward/backward kN 33 / 16  Ejector speed forward/backward mm/s 350 / 350  Max. mold weight kg 1400 INJECTION UNIT  Screw diameter / type mm 55 / Standard  Effective L/D ratio 21.3  Injection pressure bar 1564  Injection volume cm³ 475  Shot weight at max. stroke for PS g 432  Injection speed mm/s 125  Injection flow rate cm³/s 297  Screw drive / speed 1/min 267  Plasticizing rate (standard screw)4) g/s 75.8  Nozzle clamping force kN 42 ELECTRICAL PARAMETERS  Connected load kW 42  Installed heating power kW 18  Power supply V / Hz 415 / 50 WEIGHT AND DIMENSIONS Pedpfx Abe Afdatjasrc  Net weight with control cabinet t 8.4  Length x width x height m 6.1 x 1.71 x 1.95 ADDITIONAL EQUIPMENT  Increased mold opening  Hydraulic core pull 1+1 - way  Pneumatic core pull 1+1 - way  Air valves 1+1 - way  Pneumatic cascade 4 - way  Euromap interfaces E18, E67, E77  Adaptive Process Control (APC) The machine is located in our factory in Parsdorf and is available for immediate delivery. Additional options can be offered upon request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2007, KraussMaffei KM 950-17200 MX injection molding machine Year of manufacture: 2007 Clamping force increased to 1,000 tons (10,000 kN) TECHNICAL SPECIFICATIONS 1. Clamping unit - Clamping system: fully hydraulic - Clamping force: 10,000 kN (1,000 tons) – increased from the factory standard of 950 tons - Opening force: 665 kN - Column spacing (H × V): 1,400 × 1,150 mm - Dimensions of mounting plates: 1,960 × 1,710 mm - Opening stroke: 1,900 mm - Minimum mold height: 500 mm - Maximum mold height: 1,200 mm - Maximum mold opening: 2,400 mm - Ejector stroke: 300 mm 2. Plasticizing unit - Complete plasticizing unit for thermoplastics - High-performance HPS-UN screw - Screw diameter: 120 mm - Nozzle radius: 30 mm - Nozzle orifice diameter: 12 mm 3. Injection unit - Screw diameter: 120 mm - Injection weight (HDPE): 5,420 g - Injection volume: 7,634 cm³ - Specific injection pressure: 2,257 bar 4. Control system - Control system based on an industrial computer - Integrated operator panel - Color touchscreen 5. Machine dimensions and weight - Length: 12,770 mm - Width: 3,420 mm - Height: 2,750 mm - Total weight: 61,500 kg (61.5 tons) Pjdpo Af Hxxofx Abasrc

Condition: excellent (used), Year of construction: 2014, ARBURG A 370 S 700-290 U-Version (S&P 3804) Manufacture year: 2014 Operating hours: 41,257 Stunden Screw: 40 mm Injection pressure: 1530 bar Stroke volume: 188 cm³ Clamping Force: 70 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 600 mm Dimensions: 3700 x 1400 x 2000 mm Eeight: 3580 kg Connected load: 15 kW Prjdpfx Ao Af Ryksbaec U-Version = clamping and injectionside could be turned into vertical and horizontal position, 1 x corepuller, 6 x hotrunner, Airvalve, Interface colorizing, 23.761 h automatic and 17.496 h manual... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, ARBURG A 370 H 600-170 Integralpicker V (S&P 3801) Manufacture year: 2016 Operating hours: 45,447 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 60 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 650 mm Dimensions: 4000 x 1700 x 2300 mm Eeight: 3700 kg Podpo Af Rt Eefx Abaorc Connected load: 5,5 / 26 kW incl. Integralpicker V, EM67, Interface color, Airvalve, Corepuller, electric Convejorbelt, Sorter Unit, price when new machine 104.200,- Euro + picker 10.500,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Prjdpfx Abs Af Rw Noaoc Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Predpfx Abj Af Rvrjajc Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 1997, A loading machine for a thermoforming system with automated material feeding is offered. Control: Electronic control panel with screen, membrane keypad and emergency stop switch. Equipped with: Material feeding system and loading unit, protected work area with safety enclosure, heating and cooling units, ventilation and extraction ducts, separate control cabinet, electrical control and switching equipment. Viewing possible by appointment. Podpfx Aj Agn Rbjbaerc

Condition: used, Year of construction: 2000, Plastic injection molding machine, Krauss Maffei, KM 300-1900 C2, dimensions: 6.21 x 2.04 x 2.38 m, weight: 12,500 kg, year of manufacture: 2000. Prodpfx Aj Agtbwebaoc

Condition: excellent (used), Year of construction: 2008, DEMAG SYSTEM 800/1120-9500 injection molding machine + DEMAG ERGOTECH DR743 robot Year of manufacture: 2008 | Clamping force: 800 tons | Demag Ergotech DR743 linear robot Hydraulic Demag System 800/1120-9500 injection molding machine from 2008, equipped with an integrated Demag Ergotech DR743 linear robot for automatic part removal. TECHNICAL SPECIFICATIONS 1. BASIC DATA Manufacturer: Demag Model: System 800/1120-9500 Year of manufacture: 2008 Machine type: hydraulic injection molding machine for processing thermoplastic materials Clamping force: 8000 kN (800 tons) Injection unit: 9500 Equipment: integrated Demag Ergotech DR743 linear robot 2. CLAMPING UNIT Clamping force: 8000 kN (800 tons) Dimensions of mounting plates: 1620 × 1500 mm Column spacing: 1120 × 1000 mm Minimum mold height: 500 mm Maximum mold height: 1050 mm Maximum distance between plates: 2080 mm Mold opening stroke: 1030 mm Psdpfxo Af Nhfj Abaorc Ejector stroke: 350 mm Ejector force: 139 kN Maximum mold weight: 7200 kg 3. INJECTION UNIT Injection unit type: 9500 Screw diameter: 130 mm Injection volume: 7300 cm³ Injection weight (PS): 6640 g Injection pressure: 1300 bar Screw length-to-diameter ratio (L/D): 20:1 4. DEMAG ERGOTECH DR743 LINEAR ROBOT Identification data Manufacturer: Demag Ergotech Model: DR743 Type: DR743-42141000 Year of manufacture: 2008 Serial number: W743-0277 Robot type: linear, designed for automatic part removal Integration with injection molding machine: yes Robot travel ranges X-axis: 1200 mm Y-axis: 2600 mm Z-axis: 3000 mm Electrical and mechanical parameters Supply voltage: 400 V Rated current: 18 A Connected power: 12.5 kVA Robot weight: 750 kg 5. HYDRAULIC AND ELECTRICAL SYSTEM Pump motor power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1300 l 6. MACHINE DIMENSIONS AND WEIGHT Length: 12,300 mm Width: 2700 mm Height: 2700 mm Main unit weight: 33,500 kg Accessory weight: 9700 kg Total weight of main unit and accessories: 43,200 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 15,635 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 26 mm, displacement volume: 57 cm³, tie bars: 370 x 320 mm Preds Ad N Eropfx Abaec Mould height min: 150 mm Opening stroke: 270 mm Injection weight: 52 g Screw: 26 mm Injection pressure: 2200 bar Auswerferkraft: 19,6 kN

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Control circuit voltage: 24 V = Total rated current: 96.00 A Prsdpjyrczgjfx Abaoc Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, The two temperature control units are for sale; the price stated is for one unit. All units have operated for less than 1000 hours, which we can document with a photo. Medium: Water Operating temperature: max. 140 degrees Predeznlffopfx Abajc Heating capacity: 9 kW Cooling capacity: 40 kW

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Predpfj Af Ru Rex Abajc Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2004, Complete Bandera extrusion line, diameter 110/27d, for window profile extrusion, with conical co-extruder Weber CE7, diameter 51/104. Metering units Calibrating table Vertical extruder for seals Haul-off unit from 2011 Saw Receiving table Prjdpfxj Agc Huo Abasc