Used material testing for sale (478)

Condition: excellent (used), Vötsch Model: VCS³ 7034-5 Vötsch Climate Test Chamber, Water-Cooled With temperature change rate of 5 K/min Specifications for temperature testing: Temperature range: -70°C to +180°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.5 K Spatial temperature deviation: ±0.5 K to ±2.0 K Temperature change rate: Heating: 6.8 K/min Cooling: 6.7 K/min Specifications for climate testing: Temperature range: +10°C to +95°C Temporal temperature deviation in the center of the usable space: ±0.1 K to ±0.3 K Spatial temperature deviation: ±0.5 K to ±1.0 K Temporal humidity deviation in the center of the usable space: ±1% to ±3% RH Humidity range: 10% to 98% RH (Extended climate range: 2°C/95% RH regulated for a maximum of 2 hours) Exterior dimensions (W x D x H): 870 x 1700 x 1775 mm Test chamber dimensions (W x D x H): 580 x 765 x 750 mm Test chamber volume: approx. 335 liters Side ports: 50 mm and 125 mm Operating data: LED strip 24 V, 6.8 W / 2 x halogen bulbs 24 V, 50 W Rated voltage: 3/N/PE AC 400 V ±10%, 50 Hz Rated power: 9 kW Rated current: 20 A Customer-side fuse: 63 A slow-blow Refrigerant: R404A / R-23 Dledpex Elt Hefx Aduea Weight approx. 570 kg For your security as a buyer, please note the following: The following procedures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if needed 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Technical data and information subject to change and errors!) Further questions can be answered by phone.

Year of construction: 2013, condition: good (used), Universal testing machine Zwick/roll Type: 1488 Modernized in 2013 with software Test force max.: 200 kN Dledpfx Ajxw N Uvjduja Required space: width: 2,000 mm, height: 2,100 mm, depth: 800 mm, weight approx. 1,000 kg.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total width: 2,350 mm, total height: 2,420 mm, total length: 3,600 mm, type of input current: AC, input voltage: 400 V, power: 1.6 kW (2.18 HP), noise level: 75 dB, General: Precise confocal measuring station for optical height and structure measurement. Equipped with confocal sensor PD562 and measuring camera PD563. The system is used for high-resolution surface and geometry measurement. Dedpfox Ap I Hsx Adujla

Condition: excellent (used), Professional, mechanical analog hardness tester for measuring the hardness of metals according to the following scales: Brinell / Rockwell B / Rockwell C / Vickers The device operates without power – ideal for fast measurements in the field, during production, or for quality control. Features: • Original set with carrying case, manual, and accessories • BRINELL, ROCKWELL B and C, and VICKERS scales • Model: No. 3 / Instrumatic Universal Härteprüfgerät Dledpsvbwziefx Adusa • Manufacturer: C.V. Instruments Ltd, Bradford, England • Mechanical dial indicator – measurement without power supply • Clear analog measurement scale ⸻ Set includes: • Hardness tester • Carrying case • User manual in German • Set of adapters and bushings (visible in the set) Condition: Like new / warehouse stored Equipment unused or tested only a few times – no signs of wear.

Condition: excellent (used), Weiss Type: WKL 64/40 For sale is a professional Weiss climate chamber. Air-cooled -40°C to 180°C with humidity range from 10% to 98% Chamber volume: 64 liters Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1,780 mm, Width 760 mm, Depth 800 mm Temperature change rate: Cooling: 5.0 K/min Heating: 3.5 K/min Temporal temperature fluctuation: ±0.3 K to ±1.0 K Temperature uniformity within chamber: ±0.5 K to ±2.0 K Max. heat compensation: 800 W Climate testing Maximum temperature: +95°C Minimum temperature: +10°C Dew point temperature range: 5.5 ... 93.5°C Humidity range: 10 ... 95 % r.h. Humidity stability (steady state, depending on set value): ±1 to ±3 % r.h. Temporal temperature deviation (steady state, depending on set value): ±0.3 K to ±0.5 K Temperature uniformity within chamber (depending on set value): ±0.5 K to ±1.5 K Rated power: 1.8 kW; Rated current: 8.0 A Power supply: 1/N/PE AC 230V ±10% / 50Hz Refrigerant: R-404A, 0.8 kg Weight: 120 kg Important note: "The table shown in the photos is not included in the sale." Dlsdpfxsx Ek Uvs Aduoa For your safety as a buyer, please note the following information: The following tasks are carried out on our offered chambers prior to sale: 1. Functional inspection and replacement of necessary components 2. Recharging with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a test run, monitored with calibrated equipment. Condition: used Scope of delivery: (See picture) (Specifications and technical information subject to change and error!) Should you have any further questions, we are happy to assist you by phone.

Condition: excellent (used), Year of construction: 2018, Technical data: Operating voltage: 400V AC Maximum circuit breaker: 16A Dedpfx Aexzulnjdusla Frequency: 50/60Hz Electrical connected load: 3.4kW Temperature range: +5°C above ambient temperature up to 300°C Spatial temperature deviation at 150°C: ± 3.8K Temporal temperature deviation at 150°C: ± 0.7K Heating-up time to 150°C: 29min Recovery time after 30 s door opening at 150°C: 6min Air exchange rate at 150°C: 18x/h Interior volume: 400l Maximum load per shelf: 35kg Maximum total load: 90kg Energy consumption at 150°C: 1,200Wh/h Maximum number of shelves: 10 External dimensions: Width: 1,235mm Height: 1,025mm Depth: 765mm Internal dimensions: Width: 1,000mm Height: 800mm Depth: 510mm

Condition: excellent (used), CTS Model: C-40/350 Air-cooled climate test chamber For sale is a professional CTS climate test chamber, model C-40/350. This unit is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: * Heating: 3.5 K/min * Cooling: 4 K/min - Heat compensation: * approx. 3500 W at +20°C * approx. 2000 W at -20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to 78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time Dlodpfx Asx Ekupoduea The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specification: - Refrigeration unit: air-cooled, low-noise, fully hermetic, variable power control by electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber: * Floor loading: 150 kg/m² * Shelving grid: stainless steel, support area 620 x 600 mm * Max. load per shelf: 35 kg * Max. total load with maximum shelves: 100 kg Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric input for setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test item control Dimensions: - Test chamber volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level: (value not specified)

Condition: excellent (used), Weiss Type: WT11-1300/70/15/S Weiss Umwelttechnik Temperature Chamber WT11-1300/70/15/S 1300 litres –70°C to +180°C – 44 kW – Industrial Unit Water-cooled For sale is a professional temperature chamber from Weiss Umwelttechnik. This unit is engineered for demanding environmental simulation in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research sectors. The test chamber offers extremely rapid temperature changes and a large test volume. Technical data: Model: WT11-1300/70/15/S Test chamber volume: 1300 litres Temperature range: –70 °C to +180 °C Heating rate: up to 15 K/min Cooling rate: up to 15 K/min Temperature deviation: over time ±0.3–0.8 K / spatial ±0.5–2 K Humidity range (optional): 10–95 % rh, +10 to +95 °C Sound pressure level: approx. 73 dB(A) Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Rated power: 44 kW Rated current: 63 A Refrigerants: R404A (14.0 kg) R23 (5.4 kg) Pressure stages: ND 18 bar / LP 19 bar / HD 25 bar External dimensions: Overall width: approx. 3,200 mm Overall depth: approx. 2,125 mm (1,385 mm housing + 740 mm door area / radius when open) Overall height: approx. 2,020 mm Internal dimensions – test area: Inside width: approx. 1,000 mm Inside depth: approx. 1,060 mm Inside height: approx. 1,230 mm Equipment: Test chamber made from stainless steel 1.4301 Viewing window in the door Touch panel control Ports: R1: 125 mm L1: 50 mm Connection for automatic water top-up Chilled water inlet & outlet connections Overflow/condensate connection Safety monitoring & alarm system Ideal for: Automotive / E-Mobility Aerospace Research & Development Electronics testing Materials laboratory / Quality assurance Volume: 1300 litres Weight: approx. 1,900 kg Dsdpfxox Eknpe Aduela For your security as a buyer, the following steps are carried out on all chambers we offer: 1. Functional test and replacement of required components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted.) Please feel free to contact us by phone for further questions.

Condition: excellent (used), Year of construction: 2023, Bareiss Bareiss digi test II – DTAA II & DTE II – Shore A Hardness Tester – Year of Manufacture: 2023 For sale is a high-quality Bareiss digi test II hardness testing system, consisting of: - Bareiss DTE II – Electronic Unit Year of manufacture: 2023 - Bareiss DTAA II – Hardness Test Stand Year of manufacture: 2023 - Bareiss Rotofix – Rotary Sample Holder Year of manufacture: 2023 - Bareiss BS 09 – Base Stand Year of manufacture: 2023 Complete, fully modular hardness testing system (digi test II) The device is designed for precise measurement of Shore hardness on elastomers, rubber, silicone, plastics, and soft materials. Measurement is fully automatic, repeatable, and standard-compliant according to DIN ISO 48-4 / ASTM D2240. Condition: - Excellent technical and visual condition - Fully operational - German quality manufacturing Technical Data: Electronic Unit DTE II: - Input: 110–240 V AC / 50–60 Hz - Power consumption: max. 20 VA Hardness Test Stand DTAA II: - Overall dimensions: approx. 60 × 40 × 120 cm - Overall weight: approx. 45–55 kg (granite plate + test stand + table) Condition: used Scope of delivery: (see picture) - Bareiss DTE II electronic unit - Bareiss DTAA II hardness test stand - Granite measurement table - Metal table - Connection cables (Technical data subject to change and errors excepted!) Dedsx Ehk Sjpfx Aduola For further questions, we will gladly assist you by phone.

Condition: excellent (used), functionality: fully functional, Anton Paar Dljdpfx Asx Eblisduoa Type: Physica MCR 101 Rheometer Description: The device is used for rheological characterization of various substances. Both stress and creep tests can be performed. It also allows for measurements in both oscillatory and rotational modes. Various measuring geometries are available for characterizing both low and high viscosity fluids, as well as emulsions and suspensions. Additionally, there is an accessory for DMTA analysis and a measuring cell (bi-cone) for interfacial characterization. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. Dedox Eaxbjpfx Aduola The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: Dlodpfx Adox Eabpjuja • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2022, Bareiss Bareiss digi test II Hardness Testing Device – Year of Manufacture 2022 – Shore A/B/0 + Accessories Item Description: For sale is a complete Bareiss digi test II hardness testing system, year of manufacture 2022, in very good condition. The device is designed for precise and automated hardness measurement of elastomers, rubber, and soft plastics according to Shore standards (Shore A / B / 0). The system is fully functional, comes from a laboratory environment, and has only been used rarely. All plates, serial numbers, and manufacturing data are present. Made in Germany. Typical areas of application: - Quality control in industry - Laboratory and material testing - Testing according to DIN EN ISO / ASTM standards - Serial measurements with reproducible results Technical data: Input voltage: 110–240 V AC, 50–60 Hz Power consumption: max. 20 VA Measuring method: Automatic hardness tester according to Shore A/B/0 Origin: Made in Germany Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See picture) Dlodpox D U T Refx Aduea - Bareiss digi test II control unit - Motorized test stand / measuring module type DTAA II - Rotofix adapter for sample fixation - Original operating manual - Three Bareiss accessory cases including inlays (Subject to changes and errors in technical data and information!) We are happy to answer further questions for you by phone.

Condition: excellent (used), CTS CW-60/5.5 – Water-Cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed to perform simultaneous temperature and humidity testing on multiple test specimens. Device Description: This climate test chamber enables testing of the functionality and material properties of a test item under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures optimal heat transfer to the test items. The air conditioning compartment is located at the rear of the chamber interior. The refrigeration units are situated behind the chamber in a separate frame, providing good accessibility. Control systems are housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification of the test chamber, the system includes a self-regenerating compressed air dryer. An integrated blower allows the test chamber to be flushed with fresh air. Technical Specifications: Temperature Testing: • Temperature range: -60 °C to +100 °C • Temperature deviation: ±0.5 to 1 K over time • Rate of temperature change (measured in supply air, linear with specimen and radiant heat): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: • Temperature range: +10 °C to +90 °C • Humidity range: 10% to 95% relative humidity • Dew point range: +5 °C to +89 °C • Temperature deviation: ±0.5 K over time • Humidity deviation: ±1 - ±3% r.h. over time All technical values refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test specimens, without radiant load, and without ancillary equipment. Dimensions: Internal (Test/Clear Space): Volume approx. 5,500 liters (5.5 m³); Internal dimensions (approx.): Height ~2,000 mm, Width ~2,000 mm, Depth ~1,400 mm (slight variation depending on configuration) External: Height ~2,300–2,500 mm, Width ~2,300–2,600 mm, Depth ~1,700–2,200 mm (depending on doors, frame, accessories, etc.) Operating Data: • Power supply: 400 V +6/-10%, 3/N, PE, 50 Hz • Rated power: 58.3 kW (incl. 5 sockets) • Rated current: 86.0 A • Protection class: IP 54 Technical Features: • Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless capacity control via electronic monitoring and control system • Refrigerants: environmentally friendly R23 / R404A Dodex D Abpopfx Aduola Remarks: • Inspection possible by prior arrangement (location: 46325 Borken) • Shipping by freight carrier available – costs and arrangements on request • Scope of delivery: (see image) (Subject to modifications and errors in the technical data and information.) For further questions, feel free to contact us by phone.

Condition: excellent (used), Shimadzu Shimadzu EZ-LX Universal Testing Machine + Trapezium X Software – 5 kN For sale is a professional materials testing machine from Shimadzu, model EZ-LX from the EZ-Test series. This system is suitable for performing tensile, compression, and flexural tests on a wide range of materials. The machine comes complete with a PC system, monitor, keyboard/mouse, Trapezium X software (version 1.5.1), and comprehensive documentation. Ideal for laboratory, research, quality assurance, or training applications. Features of the device: - Tensile and compression testing up to 5 kN - Precise measurement of force and displacement - Fully automatable test sequences - Creation and analysis of diagrams & test reports - Emergency stop button and safety functions - Operation via PC with installed software Technical data: - Model: Shimadzu EZ-LX - Power supply: 200–230 V - Frequency: 50/60 Hz - Power consumption: 850 VA - Fuse: 250 V / 5 A (slow-blow) Dlsdpfx Aox Dbixoduoa - Force capacity: 5 kN - Dimensions: approx. 70 × 50 × 150 cm - Weight: approx. 55 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery (see picture): - Shimadzu EZ-LX testing machine - PC (Lenovo) incl. monitor, keyboard & mouse - Installed Trapezium X software - Original manuals and documentation - Connection cables (Subject to changes and errors in the stated specifications!) Please feel free to contact us by phone with any further questions.

Condition: used, Instrument Systems Instrument Systems LED Testing Laboratory CAS140C, LEDGON 100, Integrating Sphere, Keithley 2611 – Complete System! For sale is a complete, professional LED measurement laboratory from Instrument Systems (Konica-Minolta Group). The system is suitable for precise optical and electrical characterization of LEDs, LED modules, and small luminaires. All devices are from a laboratory environment, manufactured in 2007–2008, featuring high-quality industrial measurement technology. Scope of delivery / Included components - CAS 140C-152 spectrometer (2008) - Integrating sphere ISP250-110 & ISP250-211 (2008) - LEDGON 100 goniophotometer (2007) - CSD315 3-axis controller + emergency stop control panel (2007) - Keithley 2611 SMU / SourceMeter - PC system including software: - SpecWin Pro - SpecWin Light - Goniometer module - Original license CDs - User manual "LED test sockets" - Cables & accessories as per photos Technical features - Measurement of total luminous flux (lumens) - Spectral analysis (color temperature, CRI, chromaticity coordinates xy, spectrum) Dlodex Da Awspfx Adusa - Goniophotometric angular measurement - Analysis of radiation characteristics - Electrical control and IV measurements with Keithley 2611 - Fully automated test procedures with SpecWin Pro CAS140C: approx. 36×15×30 cm / 7–9 kg Integrating sphere: approx. 40×40×45 cm / 6–8 kg LEDGON 100: approx. 80×30×28 cm / 12–15 kg CSD315: approx. 42×12×35 cm / 5 kg Keithley SMU: approx. 36×9×28 cm / 5 kg Total dimensions/weight: approx. 40–45 kg Important note: "The table shown in the photos is not part of the sale." Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors!) For further questions, feel free to contact us by phone.

Condition: used, Zwick tensile testing machine Model: Z20 Controller: BX1-EZ020.A4K-000 Technical Data: Stroke: 200 mm Piston dimensions (H x W x D): 1037 x 385 x 180 mm Fmax: 20 kN Vmax: 125 mm/s Accessories: Dedpfex A Aa Asx Adusla ClipOn extensometer 13.5 mm Extensometer MFA 25 (temperature range up to +200°C) Computer + Software: testXpert II V3.5 Climate chamber: Airtemp LKG-K-TK-50-040/150 Temperature range: -40°C to +150°C Climate temperature range: 20°C to +90°C Humidity range: 10% to 95% Test chamber volume: 50 liters Temperature change rate: 1 K/min Refrigerant: R404, 5 kg Voltage: 400V 3Ph/N/PE/50 Hz 16 A 9 kW Condition: used Total weight: approx. 1500 kg Scope of delivery: (see picture) (Subject to change and errors in technical data and specifications!) For further questions, we are happy to assist you by phone. Written orders possible by email or fax.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Maximum test chamber height: 1370 mm Test chamber width: 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic power unit 280 bar Mounting surface: 415 cm² Clamping device / specimen holder included (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. Dljdpfxsx A Aaij Aduea (Subject to alterations and errors in technical data; all information provided without guarantee!) For further questions, please feel free to contact us by phone.

Condition: used, Zwick Dljdpfex Az Skox Adusa Type: Z30 Technical specifications: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Computer + software testXpert II V3.5 Total weight approx. 500 kg Condition: used Scope of delivery: (see picture) (Subject to modifications and errors in technical data and specifications!) We are happy to answer further questions by phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Offered here is a Zwick/Roell ProLine Z010 universal testing machine with a maximum test force of 10 kN. The system was manufactured in Germany, is CE-certified, and was built in 2022. It is suitable for all types of material testing, for example tensile, compression, and bending tests in laboratory, industrial, and quality control environments. Technical data of the testing machine: Manufacturer: Zwick/Roell Model / Type: ProLine Z010 (10 kN) Test Force (Fnom): 10 kN Model: Z010 TN ProLine, nominal force: 10 kN Dedpfxox Aqxme Aduola Test area (W x H): 440 x 1050 mm Testing speed: 0.001 – 1000 mm/min, continuously up to nominal force High-precision guidance, very low noise generation High-resolution, maintenance-free DC motor Electrical connection adjustable in 6 voltage ranges Certification: CE Reference: 741077 Software & PC: testXpert II basic software in German Intuitive operation, force/elongation control, statistical evaluation, user management Power supply: 230 V, 50/60 Hz, 3.5 A, 1Ph/N/PE Weight: approx. 200 kg Note: The ProLine series is among the most precise and reliable testing machines for professional applications. Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photos) Zwick/Roell ProLine Z010 testing machine Test head / compression device PC system with monitor, keyboard, and mouse Various test fixtures and accessories (see photos) (Specifications and technical details subject to change and errors!) If you have further questions, feel free to contact us by phone.

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for temperature and humidity testing of multiple specimens simultaneously. Device Description The climatic test chamber allows the function or material properties of a sample to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures effective heat transfer to the test samples. The air handling unit is located at the rear of the interior chamber. The refrigeration units are mounted in a separate frame behind the device, providing easy access. The control system is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed-air dryer. Fresh air flushing of the chamber is possible via a dedicated fan. Technical Performance Data: Temperature Tests: Temperature range: –60 °C to +90 °C Temperature deviation (temporal): ±0.5 to 1 K Temperature deviation (spatial): ±1 K at 200 mm distance from the wall Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation (temporal): ±0.5 K Humidity deviation: ±2 – ±5% RH (temporal) No radiant heat In steady-state condition Technical data refer to ambient temperature +25 °C, nominal voltage 400 V, without test sample, without radiant heat and without additional equipment. Dimensions: Internal dimensions (test space / usable volume): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Height: 2500 mm, Width: 2200-2250 mm, Depth: 2400-2500 mm (may vary slightly depending on configuration) External dimensions: Height: 2900 mm, Width: 2380 mm, Depth: 2890 mm (depending on door, frame, accessories, etc.) Operating Data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Dsdex Ankyspfx Adusla Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally-friendly refrigerants R 23 / R 404 A Notes Inspection by appointment only (46325 Borken) Shipping by freight forwarder possible – Costs & arrangements upon request Scope of delivery: (see images) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for temperature and humidity testing of multiple specimens simultaneously. Device Description The climatic test chamber allows the function or material properties of a sample to be tested under the influence of temperature and humidity. Efficient air circulation with a correspondingly high recirculation volume ensures effective heat transfer to the test samples. The air handling unit is located at the rear of the interior chamber. The refrigeration units are mounted in a separate frame behind the device, providing easy access. The control system is housed in a separate control cabinet, with the control panel integrated into the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed-air dryer. Fresh air flushing of the chamber is possible via a dedicated fan. Technical Performance Data: Temperature Tests: Temperature range: –60 °C to +90 °C Temperature deviation (temporal): ±0.5 to 1 K Temperature deviation (spatial): ±1 K at 200 mm distance from the wall Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests Temperature range: +10 °C to +95 °C Humidity range: 10% to 95% RH Dew point range: +5 °C to +89 °C Temperature deviation (temporal): ±0.5 K Humidity deviation: ±2 – ±5% RH (temporal) No radiant heat In steady-state condition Technical data refer to ambient temperature +25 °C, nominal voltage 400 V, without test sample, without radiant heat and without additional equipment. Dimensions: Internal dimensions (test space / usable volume): Volume: approx. 11,000 liters (11 m³) Internal dimensions (approx.): Height: 2500 mm, Width: 2200-2250 mm, Depth: 2400-2500 mm (may vary slightly depending on configuration) External dimensions: Height: 2900 mm, Width: 2380 mm, Depth: 2890 mm (depending on door, frame, accessories, etc.) Operating Data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specifications: Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally-friendly refrigerants R 23 / R 404 A Notes Dsdpfxex Anipj Aduela Inspection by appointment only (46325 Borken) Shipping by freight forwarder possible – Costs & arrangements upon request Scope of delivery: (see images) (Specifications and technical data subject to change and error!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Djdpfx Adjx Ag R Sjuela Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Djdexzprcepfx Aduela Further questions welcomed by phone.

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Dledpfsxzgn Ijx Aduoa Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.