Used presses for sale (23)

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t Nsdpfeyxqh Njx Af Tjwd

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Nwsdpfeyxqg Ssx Af Tsd Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1997, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Nwsdpfxsyxp T Dj Af Tod Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Nodsyxp Tdepfx Af Tjwd Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Vacuum press, vacuum table, vacuum membrane press, veneer press, laminate vacuum press Njdeyvf T Hspfx Af Tswd -Handover: in its current condition as inspected -Condition: without vacuum pump -Vacuum press: on a mobile base -Sheet surface area: 1160 x 1210 mm -Dimensions: 1940/1640/H1135 mm -Weight: 637 kg

Year of construction: 1990, operating hours: 25,892 h, condition: used, Offered for sale is a PAAL Konti 125 channel baler with chain conveyor! Nwsdpfoyw Aazsx Af Tsd Automatic 4-fold vertical wire tying! The baler was in use for 20 years in the same facility! It processed cardboard, films, and plastic components from the automotive interior sector! Bale length is adjustable; bale weights up to 300 kg possible! Press cylinder was overhauled and newly sealed in December 2024, operating without any issues since then! Rack for the large wire reels (each 500 kg) is included in the price! Large wire reels and small wire reels (25 kg each) will be provided! The buyer must arrange for dismantling of the system by 21.06.2026! System is immediately available and can currently still be inspected while in operation! Please contact us if you have any questions or are interested!

Condition: good (used), Year of construction: 1976, functionality: fully functional, machine/vehicle number: 423, roller width: 800 mm, We are offering this heating press from 1976 for sale. The press was in use until recently for vulcanizing tread segments for retreading wheel loader tyres. Included are also a considerable number of mould segments ranging from 420 to 750 mm in width. The press is electrically heated and has complete safety documentation. The heating surface is approximately 800x1100 mm. If you have any questions or require further information, please feel free to send us a message or call us. Njdox Nqlvepfx Af Towd

Year of construction: 2015, condition: excellent (used), functionality: fully functional, machine/vehicle number: ODW 2687/20, CONTINUOUS PRESS FOR SANDWICH PANELS Nwsdpfxoyt Rhkj Af Tod The installation is part of a larger production line; please refer to our other listings for additional components. The plant is fully enclosed and equipped with a walk-on operating platform above the press. WORKPIECE DIMENSIONS (as previously manufactured): Length: 2,000 mm – 8,500 mm Width: 1,500 mm – 2,500 mm Thickness: 12 mm – 60 mm Maximum batch weight: 60 kg (potentially increasable, subject to confirmation with the manufacturer) TECHNICAL DATA: Total pressing force: 4,250 kN Specific pressure: 10 – 20 N/cm² Number of hydraulic cylinders: 16 Hydraulic cylinder diameter: 110 mm Individual cylinder control: Yes Hydraulic operating pressure: 20 – 280 bar Multi-deck opening: 150 mm Maximum operating temperature: 80°C Approx. press weight: 57,000 kg Required air pressure: 6 – 10 bar Required extraction volume at air velocity v = 30 m/s: 3,400 m³/h Heat output: 2 x 110,000 kcal/h Heating medium: Hot water Customer-side supply temperature: 85 – 95°C Separate heating for top and bottom heating plates Cooling unit for reheating plates during product changeover INSTALLATION DIMENSIONS: Width: 5,066 mm Length: 9,604 mm Height approx.: 5,013 mm

Condition: reconditioned (used), functionality: fully functional, Sandt 530 CE Bridge Cutting Machine Hydraulic press with a traveling beam (front/rear movement) designed for cutting various materials using a die (leather, foam, cork, etc.). Very fast and powerful – during operation, the machine is fully automatic and does not require supervision (only the tool and the material being cut are of concern). Technical specifications: - Pressing force: 63 tons - Working area: 1200 mm x 650 mm Nwedpoyryzdsfx Af Tsd - Maximum stroke: 160 mm - Maximum daylight between beam and table: 190 mm The machine is equipped with a user-friendly touchscreen control panel featuring the following functions: - Tool zero-point detection - Force adjustment - Table height adjustment after cutting - Automatic / manual operation - Machine error diagnostics The machine is in excellent technical condition after a complete overhaul, which included: - Replacement of all seals - Replacement of all bearings and traveling rollers - Comprehensive servicing of the hydraulic and mechanical systems - Complete redesign and installation of the electrical system, including safety barriers, safety relays, and PLC panel - Painting and maintenance Supplied with the machine: Original manufacturer’s documentation, wiring diagram of the new electrical installation, and CE Declaration of Conformity. Price available on request. Assistance with transport arrangements available.

Condition: used, Year of construction: 2010, operating hours: 38,817 h, functionality: fully functional, machine/vehicle number: 61013664, clamping force: 10,000 kN, screw diameter: 120 mm, displacement volume: 6,786 cm³, overall weight: 51,000 kg, number of injections: 1, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Equipment: documentation/manual, KraussMaffei KM 1000 - 12000MX injection moulding machine with LR 350 industrial robot Nwodpfx Aeyk Dzxjf Tsd

Year of construction: 2001, condition: used, Max. pressure: 500t, max. operational temperature: 370°C, oil heated, oil cooled, with a secondary cycle for recirculation of heating output, was overhauled in 2014. Nwedpsdwf Dbjfx Af Tsd

Year of construction: 2003, condition: ready for operation (used), There are two identical presses available, max. stroke speed: 200mm/s, oil viscosity: 46cSt a 40°C, max. hydraulic/operating pressure: 25/ 210bar, weight of the half tool: 10t, pump power at 75/ 210bar: 200/ 70l/min, pump motor power: 30kW, weight: 25t. Nwodpeivt R Aofx Af Tsd

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 202102, type of input current: three-phase, power: 5 kW (6.80 HP), input voltage: 230,400 V, Comec Moulding machine for pressing and moulding Shoe insole parts Nsdpjyizl Ssfx Af Tjwd

Condition: refurbished (used), functionality: fully functional, Schon 6005 B Hydraulic Cutting Machine with Returning Hammer Robust German manufacture Nwsdpfoyiffyox Af Tsd Pressing force: 70 tons Working area: 2050mm x 850mm Maximum stroke: 160mm Weight: approx. 6500kg Machine in perfect technical condition after complete servicing Price per machine negotiable Assistance with transport organization available

Year of construction: 2026, condition: new, functionality: fully functional, The PR8 pre-washer is designed for intensive pre-washing of plastic waste in recycling lines. The machine removes sand, soil, and mechanical contaminants, preparing material for further washing stages. Suitable for continuous 24/7 industrial operation. Materials: PE, PP, HDPE, LDPE, plastic films, post-production waste Technical data: Capacity: up to 2000 kg/h Drive power: 30 kW Rotor length: 3000 mm Rotor diameter: 680 mm Dimensions (L x W x H): 3689 x 1766 x 3294 mm Inlet opening: 500 x 450 mm Nodpfx Ajyh Hr Eef Tewd Features: Heavy-duty industrial construction Replaceable wear parts Easy service access Ready for integration into complete washing or recycling lines 📩 Available in customized configurations. Contact us for details.

Condition: excellent (used), Year of construction: 2008, For sale: Hydraulic through-feed press JOOS DLP 240/OK Nwodoyc Eukjpfx Af Tjd Machine type: Hydraulic through-feed press with automatic feeding and unloading of elements. Application: Designed for coating flat panel materials of uniform thickness using coating material under elevated temperature. Basic data: Manufacturer: JOOS Model: DLP 240/OK Year of manufacture: 2008 Operating voltage: 400 V / 50 Hz Power consumption: 55.5 kW Hydraulic cylinders: 8 × 125 mm + 2 × 40 mm Operating pressure: 245 bar Pressing surface: 4200 × 1400 mm (L × W) Total pressing force: 2400 kN Condition: very good Documentation: complete Important note: The machine does NOT have a control program. TAG: hydraulic press, through-feed press, industrial press, coating press, panel processing machine, production line equipment, industrial machinery, JOOS, Siempelkamp, Orma, Italpresse, Dieffenbacher, Bürkle, Langzauner

Condition: used, Trolley Beam Punching Machine / Trolley Beam Punch Sandt Type 530 - Used Machine Punching force: 30 tons Nodpfx Aox Sdzpjf Tewd Table size: 1600x500 mm Trolley size: 500x500 mm Used, overhauled machine

Condition: used, Sandt 530 machine available with 80 T or 100 T Punching force: 800 kN Nedpfox Sdy Eox Af Tswd Table size: 1600 x 800 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled or Punching force: 1000 kN Table size: 1700 x 1050 mm Punching stroke: 20 – 165 mm, infinitely adjustable Working height: without punching pad approx. 1000 mm Overhauled

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 101705 CE, total width: 2,450 mm, total length: 2,290 mm, total height: 1,970 mm, overall weight: 5,100 kg, Lift table punching machine; retractable bridge - Punching force 800 kN Nedpfex Nvtrsx Af Tswd - Table dimensions 1600 x 800 mm - Weight 5100 kg - W x H x D approx. 2450 x 2290 x 1970 mm - Hydraulic oil approx. 125 l HLP 46 - Punching pad P178 NE, 10 mm thick - Special accessories: electrically adjustable support legs - Triggering via button or single-cycle safety light curtain - Technically inspected and fully overhauled - Condition as new - Colour RAL 7035 grey - Without hydraulic oil

Year of construction: 1993, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1993 Machine-No. 2559 pressing force: 2800 kN heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Nwodpon Sm A Ssfx Af Tod Good, used condition. With CE-marking.

Year of construction: 1990, condition: good (used), Vulcanizing press of the company Wickert Maschinenbau GmbH Landau Year of construction: 1990 Machine-No. 2559 pressing force: 2800 kN Nwjdpfxon Sm Ayo Af Ted heating plates: 500 x 500 mm heating: electric distance between plates: 200 mm control Siemens S5 OP17 (conversion to S7 feasible) incl. sliding table, vacuum pump, vacuum chamber, storage tank Good, used condition. With CE-marking.

Condition: excellent (used), Year of construction: 2011, Ares Magic Flap MG1200 CE – Hydraulic die-cutting press with front-rear traveling head ARES machines combine the best aspects of hydraulic and electronic technology in die-cutting systems. Pressing force: 27 tons Working area: 1200 mm x 500 mm Nwsdpfx Afjxzi S As Tsd Maximum stroke: 100 mm Pump motor: 1.5 kW Hammer drive motor: 0.75 kW Overall dimensions: 2920 mm x 1050 mm x h 2220 mm Weight: 2,600 kg Included: - Complete manufacturer documentation - New hydraulic oil - Cutting board - Work lights Machine in perfect technical condition, fully serviced Price per machine on request Assistance with transport arrangements available

Condition: new, Year of construction: 2024, functionality: fully functional, The SR 8 screw compactor from Koltex is an advanced solution designed for drying film flakes and preparing them for the extrusion process. This innovative machine effectively reduces the moisture content of the material to around 5%, significantly impacting the quality of the final recycled product. Nwjdpfjuqwzwex Af Ted Modular construction The machine can be customized to meet the individual needs and requirements of the customer, allowing it to be used to its optimum potential in a wide variety of applications. Reliability The use of renowned drive components with a high degree of efficiency reduces operating costs while extending service intervals. Intelligent machine operation Touch panel with intuitive interface for easy control and monitoring of the working process. Space-saving The press is designed to be compact, saving valuable space in the workplace. Capacity (LDPE film): 1500 KG/H Auger diameter: 500 mm Engine power: 45 kW Scraping power: 7.5 kW Feed size: 760x650 Overall dimensions: 6097x1833x2729 Weight: 6800 kg