Used peripheral devices for sale (108)

Condition: excellent (used), Year of construction: 2005, Welcome We offer Gcodpfx Adsvyuvuo Aja Thermoregulator - thermostat for injection molds - model HB THERM 160 U1 - series 4 Technical data: Manufacturer: HB - THERM Type: HB - 160U1 Year of production: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW

Condition: excellent (used), Volumetric K-Tron dosing with Ruhrwerk and auger Gcsdervxn Ijpfx Ad Aea - Suitable for powder and granulate - Screw diameter: 35 mm

Condition: new, Year of construction: 2025, functionality: fully functional, The SS-M screw separator from MASS is available for sale; Height: 1500 mm Screw length: 800 mm Overall width: 1060 mm Inclination angle: 30 degrees Gedex E Ry Sspfx Ad Aeca Profile: 9 mm Gap adjustment possible via wheel

Condition: like new (used), Year of construction: 2010, functionality: fully functional, You are planning to expand your central drying system but do not want to incur the high costs of original manufacturers. We are pleased to offer you an economical and technically reliable solution for this. Your in-house electrical engineering makes it possible to easily integrate the SIMAR conveying separators into any existing control system. Commissioning only requires the control signal "Convey Start" (flap closed) – the conveying process then runs fully automatically. The units were used exclusively in a cleanroom and operated with PP material without glass fibers, and are therefore in very good condition. We offer 44 SIMAR conveying separators—cleanroom production, near Stuttgart. Equipment: With machine hopper Partly equipped with shut-off valve All units made of stainless steel Godpfxowub E Rs Ad Aeca If you wish to purchase a unit, the price is €850 each. If you buy all 44 units, the total price is €21,500 including transport within Germany. If you wish to collect the units yourself, the price will of course be reduced! This is definitely worth a look!

Condition: good (used), Year of construction: 2018, MOTAN METRO G 1.5 I-HSS Stock no.: 503658 Machine type / Device type: Suction conveyor Manufacturer: MOTAN Model: METRO G 1.5 I-HSS Year of manufacture: 2018 A total of 5 units in stock Gcodpfx Ajxyi E Hjd Asa

Year of construction: 1993, condition: good (used), BFM overhead cutter for PE-PS-PA pelletizing Gcsdpfxsipyh Io Ad Aea

Condition: like new (used), Year of construction: 2022, Model: Piovan T3M Residence Hopper Type: Insulated stainless-steel material hopper Capacity: approx. 3 litres Construction: Stainless steel, 30 mm insulation Purpose: Material buffer downstream of the dryer Mounting flange diameter: Ø 280 mm Gcsdpfxsxyku Nj Ad Aea Discharge diameter: approx. 67 mm Lid: Hinged cover with lock Options: Viewing window, level sensor, machine-mounting accessories

Condition: used, Year of construction: 2015, Brand: Piovan Type: Dryer Model: HRM 200 Gedpfx Adsxvdh Is Aeca Year of manufacture: 2015 Dry air quantity: 200 m3/h Connected load, max.: 38 kW and Model: PTUSET Year of manufacture: 2017 Connected load, max.: 9.0 kW

Condition: used, Year of construction: 2012, functionality: fully functional, The rotary table from MTF is available for sale; Container query: 600 mm x 400 mm x 400 mm Gcedpfjx Ek Dwex Ad Aja Interface for query 2 levels, each with 4 containers Diameter: 1500 mm, height: 1200 mm

Condition: like new (used), operating hours: 5,000 h, PIOVAN granulate dryer, 100 liters Gcodsxtitkjpfx Ad Aja

Condition: excellent (used), Year of construction: 2017, Stock no.: 503657 Machine type/ Device type: Hot Runner Control Unit Manufacturer: Günther Model: DPT 5 Year of manufacture: 2017 Electrical Data: Connection voltage: per phase 200-250V AC, 50 to 60Hz, typically star connection Star connection: 3-phase network with neutral, 200-250V between L and N Delta connection: 3-phase network without neutral, 200-250V between two phases Load connection: IOA per channel (fuse 10A ultra-rapid = FF 10A) and 1 channel per phase with 16A (see maximum load per phase!). Phase load (5 channels per phase): maximum 25A Protection rating: IP 20 Dimensions: Gedpfsxx Tmrsx Ad Asca (W, H, D) 468mm x 142mm x 345mm Weight: 13.0 kg Enclosure color: grey / blue (RAL 9018 / RAL 5015)

Condition: excellent (used), Year of construction: 2008, TTW Gcsdpfx Adex A Iqts Asa TYPE: TFR 600 SG Year of manufacture approx. 2008

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Godpfjxykm Sjx Ad Aeca Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Year of construction: 2000, condition: used, Used filterless hopper loader Gsdpfx Adodlpyns Asca

Condition: used, functionality: fully functional, Material conveying devices, 4 units, from the company Motan are available for sale. Gcjdex Ekxnepfx Ad Aoa Conveying capacity: 40 l/h Adjustable cycle 230V/50Hz

Condition: like new (used), functionality: fully functional, machine/vehicle number: Nilfisk Industriesauger R104 V 4031600000, R104 X Product number: 4031600006 The industrial vacuum cleaners of the R series are designed for extracting offcuts, cutting dust, and all types of production waste (such as plastic, paper fragments, or fabric scraps) and compacting them to facilitate their return to the recycling process. Originates from a cleanroom plastic granulate production Industrial vacuum cleaner for compressible material The R series industrial vacuum cleaners are engineered to remove and compact offcuts, cutting dust, and all kinds of manufacturing waste (plastic, paper fragments, or fabric offcuts) so these materials can be reintroduced into recycling cycles. • Reduced downtime through continuous cleaning • Compaction and easy removal of extracted material • Dust removal for work environments • Return of trim material to production • Flexible thanks to a variety of power classes • Container sizes are maintenance-free • Easy inspection • Operation possible without supervision. Gedpfx Ajw D Upzed Ajca

Condition: excellent (used), Year of construction: 2019, Hot Runner Controller Günther DPT 6 Stock No.: 503655 Machine / Equipment Type: Hot Runner Controllers Manufacturer: Günther Model: DPT 6 Year of Manufacture: 2019 SUPPLY VOLTAGE Per phase 200–250 VAC, 50 to 60 Hz, typical. Star connection: 3-phase network with neutral conductor, 200–250 V between L and N. Delta connection: 3-phase network without neutral conductor, 200–250 V between any two phases. LOAD CONNECTION 16A per channel (protection: 16A fast-blow fuse, "FF 16A") Phase load: maximum 32A Phase L1: Channels 1 - 6, 19 - 24 Phase L2: Channels 7 - 12 Phase L3: Channels 13 - 18 MAXIMUM OUTPUT DPT6: 7.3 kW (1 x 32A) LOAD TYPE Resistive loads only permitted SENSOR CONNECTION Thermocouple type L (Fe-CuNi) (electronic compensation) Thermocouple type J (Fe-CuNi) (electronic compensation) Thermocouple type K (NiCr-Ni) (electronic compensation) Thermocouple type N (NiCrSi-NiSi) (electronic compensation) OK OUTPUT Potential-free relay contact (max. 230V/1A, not fused) BOOST INPUT Connection for a potential-free relay contact POWER CABLE CEE plug 32 A (configured for star wiring) HOT RUNNER CONNECTION (HK) Load connection: 2 x 24-pin HAN-E female sockets Thermo connection: 2 x 24-pin HAN-E male sockets FUSES Load output fuse: FF 16A, 6.3 x 32mm, Schurter SA type Control fuse: slow-blow 2A, 5 x 20 mm SERIAL INTERFACE RS232, TTY, (RS422, RS485) Interface protocols available for Arburg, Mannesmann, Krauss-Maffei, Engel, and others. OUTPUT Continuous via pulse group control CONTROL RANGE Adjustable from 0 to 700°C / 0 to 999°F DECREASE (SETBACK) Adjustable from 0 to 200°C / 0 to 360°F INCREASE (BOOST) Adjustable from 0 to 100°C / 0 to 180°F SAFETY SHUTDOWN Adjustable from 0 to 700°C / 0 to 999°F DATA BACKUP Power-failure resistant, data retention for at least 10 years STORAGE TEMPERATURE 0 to 70°C OPERATING TEMPERATURE 0 to 40°C HUMIDITY Storage: 30% - 80%, non-condensing Operation: 40% - 70%, non-condensing PROTECTION CLASS IP 20 DIMENSIONS (W x H x D) 362 mm x 180 mm x (depth missing) Approx. 16.0 kg HOUSING COLOUR Aluminum / blue / grey (RAL 9006 / RAL 5002) Gcjdpsxx Ti Tsfx Ad Asa

Condition: repair required (used), Year of construction: 2007, Color separator Separation & Sorting Technology Gmbh Year 2007 Missing sensors Gedou Icgbspfx Ad Asca Available catalog

Condition: excellent (used), Year of construction: 2014, Model: Wittmann Tempro TP+D-S-2:160 Type: Dual-zone pressurized water temperature control unit Max temperature: 160 °C Heating power: approx. 9 kW per zone (up to 12–16 kW optional) Pump: Magnetically coupled, 40–60 l/min, up to 4.5–6 bar Medium: Water (pressurized system) Gcjdpfx Aexykm Eed Aoa Cooling: Plate heat exchanger, cooling water G 3/8″ Mould connections: G 3/4″ Voltage: 3 × 400 V / 50 Hz Control accuracy: ±0.2 °C Zones: 2 independent circuits Features: Automatic filling, pressure monitoring, leak-free pump, mold purging, SSR heater control Options included: SO-C safety package + S-PLUS D 160 performance upgrade Dimensions: approx. 880 × 550 × 1000 mm Weight: approx. 95–120 kg

Condition: not inspected (used), EWIKON 68010.208 D Godpfsxcnkgjx Ad Aeca

Condition: used, Year of construction: 2007, functionality: fully functional, Koch is selling 3 units for 2-component materials; the price is per unit. The units can convey two material components via an internal mixing valve. By adjusting the mixing valve cycles, optimal mixing of the materials can be achieved. Gjdpfxox Ekwqe Ad Asca Material components: 2 Volume: 12 liters Conveying capacity: 60 kg/h Voltage: 230V/50Hz Compressed air: 5 to 7 bar Filter cleaning: by air

Condition: used, For Sale: Piovan Plastic Dryer TDM507 – 2 Units Available I am offering two Piovan TDM507 plastic dryers for sale. These units are designed for efficient drying of plastic granulates using dry air technology. They are suitable for injection molding, extrusion, and general plastic processing. Both machines are robust, reliable, and built for continuous industrial operation. Technical details: Manufacturer: Piovan Model: TDM507 Year: 2017 Power: 3.5 kW Voltage: 230 V / 50–60 Hz Single-phase Weight: 180 kg Heating and regeneration functions Stainless steel drying hopper included Condition: Both units are in very good technical condition and fully operational. Clean interior, complete components, and ready for immediate use. Gcsdpfx Adjxz Dzrj Aea Price: 1,750 EUR per unit Quantity: 2 units available Location: Ivanka pri Nitre, Slovakia

Condition: not inspected (used), EWIKON 68010.204D Gcodpfexcnk Hjx Ad Aoa

Condition: as good as new (ex-display), Year of construction: 2014, functionality: fully functional, The separating device from trio-technik is for sale. This unit is designed for the separation of objects with various geometries. Length: 950 mm Gjdpfox Dm Rzex Ad Aoca Width: 700 mm Height adjustable: 700-1380 mm Possible gap width: 50 mm Tilt angle: max 20 degrees Drive/three-phase current: 400V 50Hz Power consumption: 0.09 kW/h Speed adjustable.

Condition: not inspected (used), EWIKON Godpfxsxcniio Ad Aeca Type: 68010.204D