Used Blow molding machines for sale (33)

Condition: good (used), Year of construction: 1994, PET Blow Moulding Machine - MAG PLASTIC The ideal blowing solution for PET bottles Year : 1994 Type : SSB 40 Input voltage : three-phase 400 V Frequency : 50 or 60 Hz ± 5% Lslhcdoqmn R Njw Eohg Total installed power : 86 kW (Option 102 kW) Weight: Approximately 5000 kg Number of molds: 4 Clamping force : 250 KN Total opening stroke : 120 mm

Condition: good (used), Year of construction: 2015, Press for the production of plastic bottles up to 0.5 L by blowing Made in Germany in 2015 machine is not under power, is in stock Injection Unit - electric srew drive \- Injection unit accrding to EUROMAP 260 \- Screw dia 40 mm \- Injection pressure 1500 bar \- L/D ratio of screw 25 \- Cylindar head volume 176 cm3 \- Max shot weight in HDPE 140 g \- Injection speed 201 cm3/s Lelhjrnzaqocdw Ejhg Clamping Unit \- clamping force injection station 400 KN \- Clamping force blow station 60 kN \- Mould opening force 100 kN \- Mould opening stroke 280 mm \- Minimum mould height 254 mm \- Stroke of rotary table 80 mm \- Max rotary dia 890 mm \- Core rod holder lenght 400 mm \- Push bar lenght 370 mm \- Daylight between columns 571x571 mm \- Area of optimum clamping pressure 200x200 mm General data \- Installed electric total rating 37 kW \- Electric consuption total 6,6 kW/hour \- Weight 9500 kg (Machine 8900 kg + compressor and airman) \- Control Phoenix Contact General purpose srew suitable for proceccing PET, PP, PE, PC, PS, SAN

Condition: used, Year of construction: 1989, Functionality: fully functional, screw diameter: 120 mm, clamping force: 800 kN, plate length: 1,600 mm, plate width: 600 mm, Blow Molding Machine Bekum Model BA 200 Blow Molder 8 Liter Accumulation Head Number of Heads: 1 Number of Stations: 1 Production Capacity (Kg/Hr): 500 kg/h Extruder Type: Accumulator Processed Material: PE Number of Extruders: 1 Screw Diameter: 120 mm L/D Ratio: 24 Lhelhcswl D U Nodw Esg Thickness Control: Yes Supplied with Material Feed Reminder: Opening Stroke: 710 mm Clamping Force: 800 KN

Condition: ready for operation (used), Year of construction: 2004, Two injection blow molding machines for hollow body production are available. 1) Injection blow molding machine Kautex KB 15.10, year of manufacture: 1984, overhaul: 2005, stations: 1, nozzle diameter: 80mm, clamping force: approx. 250kN, opening stroke: 300mm/800mm, max. mold thickness: 2x160mm, max. mold dimensions X/Y: 950mm/600mm, control: Siemens S7, operating hours: approx. 96432h. 2) Injection blow molding machine Kautex KB 50/13-S, year of manufacture: 1983, overhaul: 2003, nozzle diameter: approx. 80mm, clamping force: approx. 410kN, plate dimensions X/Y: 700mm/900mm, mold thickness: 2x320mm, opening stroke: 600mm/1300mm, control: Siemens S7. Documentation available. On-site inspection is possible. Lhslhcowligwjdw Ejg

Condition: like new (used), Functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) Lslhcdog Ailcew Ejhg 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 1992, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 4 S1 Lelhcdwswa Rhrj Eohg Year of prod. 1992 Capacity: 4,000 for 1.5 L / 2 L bottles Installed power: 150 kW Includes 1.5 L molds Preform feeder Technical condition: used machine, starts up, program is functional

Condition: ready for operation (used), Bekum BA 52 Blow Molding Machine Stations: Single Clamping Force: 450 kN Control: Original Bekum Lhjlhcev Hpppjdw Esg Extrude: S 701 Head: 6 Liter Accumulator-Head new Max. Bottle volume: 60 Liters Mold Dimensions (Length/Width/Depth):1200/750/2*150-300 (mm)

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 240, power: 60 kW (81.58 HP), Equipment: documentation/manual, Complete pellet plant Lslhcswiik Redw Ejhg consisting of wood grinder, sawdust pulverizer, pellet powder storage silos, pellet pressing machine plus conveyor belts, pellet collection silos and weighing system for bags or big bags. Complete plant with all automations

Condition: excellent (used), Year of construction: 2015, operating hours: 500 h, Functionality: fully functional, machine/vehicle number: ZQ-A1000-1, overall weight: 2,800 kg, total width: 2,500 mm, total length: 5,000 mm, total height: 2,000 mm, PET-Flaschenblasmaschine, half automatic for sale. Marke: Zq-A1000-1 Zhenjang, China Construction year: 2015 Herstellbares Fassungsvermögen: bis 2 L Capacity: 1,200 units/hour (for 1.5 L bottles) 20 kW, 500-650 Bph Operating hours: approx. 500 operating hours PET-Preforms must be manually dosed. Environmentally friendly! Es funktioniert auch mit Rohstoffen, die aus Mais herstellert werden. The machine is equipped with all necessary additional devices. Lelhswazbpecdw Ejhg Wir senden Ihnen eine separate Liste der Maschine und den Preis des Zubehör zu. Contact: Márta Takács Price: 40,000 EUR We take over the labor production with the machine!

Condition: like new (used), Year of construction: 2025, operating hours: 500 h, Functionality: fully functional, screw diameter: 70 mm, overall weight: 10,000 kg, total width: 4,000 mm, total length: 6,000 mm, total height: 3,500 mm, New perfectly working Chinese blow moulding machine for sale. - year of production is 2024, in operation from 2025. - two heads with four nests (i.e. it manufactures four products at the same time) - can produce bottles up to approximately 5 litres - two robotic arms - 450-500 products/hour Accessories: 1) gravimetric mixer 2) automatic feeding system 3) silent grinder 4) conveyor belt system i) for finished products ii) for inline and rejects Lolowd Uphshcdw Eshg 5) liquid cooler 6) compressor (inverter) 7) pallet foiling with clamp 8) leak tester The machine can/must be viewed in operation, training and support can be provided on request. Please see attached a video of the machine in operation.

Condition: good (used), Production capacity of up to 4000 b/h (depending on the format) For formats between 0,25lts up to 3lts Lsljwcggvehcdw Eohg Composed by: • Oven for heating the preforms composed of 6 heating modules with 8 infrared lamps each • Preform transfer Wheel • Two-stage compressed air blowing body, low pressure pre-blowing and subsequent high pressure blowing. • Bottle transfer Wheel • Delivered with pallet turner. DOCUMENTATION AVAILABLE

Condition: excellent (used), Year of construction: 2003, PET bottle blowing machine Lhjlhcdwovddkve Esg Manufacturer: KRONES Model: CONTIFORM K781 Efficiency: 12,000 bph Includes 1.5 L and 0.5 L bottle molds Power: 150 kW Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Set dimensions (blow mold + preform feeder): 1100 x 340 cm, h: 450 cm Blow mold dimensions: 500 x 340 cm, h: 250 cm Feeder dimensions: 600 x 250 cm, h: 450 cm Air requirement: 10 bar - 1500 m3/h, 30 bar - 1000 m3/h Year of production: 2003 Technical documentation of machine operation Very good condition

Condition: excellent (used), operating hours: 34,000 h, KAUTEX BLOW MOLDING MACHINE reference KCC30 in good condition Year of manufacture : 2011 Working hours : 34 000 hours Type Single-station machine Type of raw material : HDPE, PP Robot KAUTEX Clamping force : 300 KN Screw diameter 90 mm Accumulator head capacity (HDPE) : 4 kg Clamping plate : width 530 mm Clamping plate : length 700 mm Distance between plates : 1000 mm Tool width max : 710 mm Tool thickness max : 2 x 250 mm Tool height max : 700 mm Tool weight max : 2 x 700 kg Dimensions of largest tool used in production : 870 x 650 x 765 mm Control system : Blow command Extruder type : E 90 Extrusion head Vertical hose head of a hydraulic accumulator Bottle volume Max : 30 L Diameter of die-a tool min-max : 90-220 mm Diameter of die-a tools currently used in production : 90, 150, 170, 190, 220 mm Max working pressure of the machine :220 bar Air consumption : 95 m3/h Air pressure : 6-10 bar Installed heating power : 20 kW Lhjlhcdsu Tvcwew Eeg Number of temperature zones : 5

Condition: like new (used), Functionality: fully functional, overall weight: 2,800 kg, total width: 1,500 mm, total length: 3,550 mm, total height: 2,200 mm, Equipment: documentation/manual, 3-cavity plastic bottle blow molding machine processed plastic PET, PC, PE/PP weight (kg) 2800 KG max. neck diameter (mm) 45 mm max. bottle height (mm) 350 mm bottle volume (ml) 1500 ml place of origin Zhejiang, China brand name METO dimensions (L*W*H) 3.55*1.5*2.2 m SMC brand high pressure valve FESTO brand rotary cylinder MITSUBISHI brand PLC power (kw) 20 voltage 110v/230v/380v cooling water temperature 10 degrees actual energy consumption 12 kw low working pressure 0.7-1.0 MPa blow pressure 2.5-3.5Mpa Lelhowbwfyscdw Eshg Temperature 10℃ Flow 40 l/min Number of lamps 24 CE certificate

Condition: ready for operation (used), Year of construction: 2001, A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Kiefel Worms 80.25D outer layer extruder, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Reinhold SRK 200/9.6 film calibrating device. The entire line is controlled by a Plast Control system. Further components: integrated width measurement, C-scan for profile measurement, web center control, corona pre-treatment, film pre-draw. Including a replacement FSBK 5-layer blow head with IBC, replacement rollers, annular gap blower with filter, suction units, crane and external system terminal. Documentation available. On-site inspection is possible. Lhjlsv T An Sjhcdw Eog

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, Functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm Lhslhev Iflpocdw Eeg • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: reconditioned (used), Year of construction: 2012, SB 3000.5E linear blow molding machine, including: New modular heating system, Lhjlhcdwot Uap So Eog Preform feeder, easy and quick mold change system, electric stretching system, touch screen panel, smooth performance adjustment, cracked bottle elimination function Single-nest machine prepared for blowing 5-liter bottles. The machine after a major renovation at Dynaplast, all operating components were replaced and the drive of the bottle ejection basket was changed, instead of the angular gear, a belt transmission with a servo drive was used, which allows for smoother operation of the component. The preform is also stretched using a belt transmission and driven by a servo drive, which allows for smooth speed adjustment from the operator panel, (we can smoothly adjust the speed of the stretching rods) The price given is for the machine without the mold visible in the photos, it is possible to resell the visible 5L mold

Condition: used, Year of construction: 1998, Automatic PET bottle blowing machine Manufacturer: SIDEL Type: SBO 16/16 S1 Year of manufacture 1998 Capacity: 16,000 for 1.5 L bottles and up to 19,000 bph for 0.5 L bottles Installed power: 347 kW Includes 1.5 L moulds Preform feeder Lhslsutni Rjhcdw Ejg Chiller cooling unit Technical condition: used machine, functional until dismantled. The machine is currently dismantled, assembled in elements and prepared for transport. Full and original technical documentation.

Condition: ready for operation (used), screw diameter: 120 mm, clamping force: 800 kN, Blow molding machine - extrusion blow molding machine BEKUM BA 200 8 l accumulation head 1 head and 1 station Processed material: PE Production capacity: 500 kg / h Extruder type: Accumulator Number of extruders: 1 Lelhov Hpnrocdw Ejhg Screw diameter: 120 mm L / D ratio: 24 Thickness control: yes material feed Opening stroke: 710 mm Clamping force: 800 KN

Condition: ready for operation (used), Year of construction: 2008, A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible. Lolhcdwet Eu Azj Ejhg

Condition: reconditioned (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: SB 8015, SB 8000 linear blow molding machine, serial number 8015, year of production 2006 with a nominal capacity of 7200 bph (approx. 6000 bph with a 2.0l bottle), Machine after general renovation, in very good technical condition, all operating components replaced. The machine set includes: Preform feeder, easy and quick mold change system, electric stretching system, mechanical lifting system, powered by electric motors for a closing system with pressure compensation, Lolhot T Txqscdw Ejhg 6-inch touch panel, smooth regulation of capacity in the range of 5000-7400 bph, function of eliminating deformed molds and cracked bottles. The machine is adapted to the PCO 1810 preform, it is possible to retool the machine for another preform. The machine is sold without blow molds, we can make molds according to the customer's design adapted to our machine.

Condition: excellent (used), Year of construction: 2012, operating hours: 33,000 h, KAUTEX BLOW MOLDING MACHINE reference KCC30 in good condition Year of manufacture : 2012 Working hours : 33000 hours Type Single-station machine Type of raw material : HDPE, PP Robot KAUTEX Clamping force : 300 KN Screw diameter 90 mm Accumulator head capacity (HDPE) : 4 kg Clamping plate : width 530 mm Clamping plate : length 700 mm Distance between plates : 1000 mm Tool width max : 710 mm Lolhcdju Rtkiow Ejhg Tool thickness max : 2 x 250 mm Tool height max : 700 mm Tool weight max : 2 x 700 kg Dimensions of largest tool used in production : 870 x 650 x 765 mm Control system : Blow command Extruder type : E 90 Extrusion head Vertical hose head of a hydraulic accumulator Bottle volume Max : 30 L Diameter of die-a tool min-max : 90-220 mm Diameter of die-a tools currently used in production : 90, 150, 170, 190, 220 mm Max working pressure of the machine :220 bar Air consumption : 95 m3/h Air pressure : 6-10 bar Installed heating power : 20 kW Number of temperature zones : 5

Year of construction: 1990, Condition: good (used), Souffleuse Battenfeld-Fischer VK 1-1 2 head Entraxe :100 mm Volume max of the bottle : 0,5 l Number of post: 1 Extrusion continuous Nombre d'extrudeuses: 1 Screw diameter : 60 mm Rapport L/D: 20 Parison thickness control : PROFILOG 32 point Lhjljlbmzgjhcdw Eeg Heating knife Décarottage automatique Voltage : 380 V Triphase Frequency : 50 Hz Blow mouding machine Dimensions (L x W x H): 4.60m x 1.50m x 2.60m Weight: 5000 kg Cabinet Dimensions (L x W x H): 0.85m x 1.10m x 2.40m Weight: 400kg

Year of construction: 2011, Condition: excellent (used), INJECTION MACHINE - PROCREA BLOWING TYPE Rev 300 This PROCREA REV 300 injection blow molding machine can produce completely finished hollow body containers, without waste as injection molded with different plastic materials, with fully automatic cycles, capacity of 50 cc. at 15 liters and weight of 20 gr. at 700 gr. This machine is predisposed to work with molds of 1 to 8 cavities and the production is very high thanks to the revolver system which carries out all the operations of injection, blowing and ejection of the finished part in a single stage. The construction of molds for the Rev 300 is very simple thanks to the automatic extraction system applied to the revolver. Lheljpy Eq Hjhcdw Eog

Condition: good (used), Year of construction: 1990, Battenfeld-Fischer VK 1-1 Blower Number of heads: 2 Center distance: 100 mm Maximum container volume: 0.5 l Number of stations: 1 Continuous Extrusion Number of extruders: 1 Screw diameter: 60 mm L/D ratio: 20 Parison thickness control: PROFILOG 32 points Center distance: 100 mm Hot knife Automatic coring Voltage: 380 V Triphase Frequency: 50 Hz Blower: Dimensions (L x W x H): 4.60 m x 1.50 m x 2.60 m Lholhcdwevrfhrj Eeg Weight: 5000 kg Cabinet: Dimensions (L x W x H): 0.85 m x 1.10 m x 2.40 m Weight: 400 kg