Used test bench for sale (29)

Condition: good (used), We offer the following: Pgodeycvh Ispfx Aaheg 1 x spotting plate / spotting table Dimensions: 1200 x 800 x 800 mm (LxWxH) An inspection is possible at any time.

Condition: ready for operation (used), Year of construction: 2021, An automatic Gise inspection machine for nails is available. Inspection method: image processing system, camera system: Keyence CV-X300F, throughput: approx. 60nails/min, detection accuracy: 98%, machine dimensions X/Y/Z: approx. 1200mm/1000mm/1100mm, weight: approx. 150kg, control system: Siemens S7-1500. Including segmented conveyor. Documentation available. An on-site inspection is possible. Pgjdpfx Aoyarqasahog

Condition: used, Chroma Type: ATE 17020 Pgsdpowwrxaofx Aahsg The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: used, Chroma Type: ATE 17011 Dimensions: W x D x H 600 x 800 x 1760 mm Regenerative Cell Tester (5V/100A x 12 channels) Power supply: 400V/50 Hz 24 KVA Data Logger (64 channels) 8-Port Sensor Card Module 17212R-5-100 Max 5V / 100A Max channels: 12 (fixed) Parallel operation: 200A, 300A, 400A, 600A, 1200A V Adjustable from 0 mV to 5000 mV * 1, resolution 1 mV A Podpewwrn Ujfx Aahsgg Adjustable from 0.01 A to 100.00 A, resolution 0.01 A Connection: 400V/50Hz, 5 wires 24 kVA Weight: 250 kg Condition: used Scope of supply: (see picture) (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Condition: good (used), Aluminium measuring table with 50 mm aluminium plate and drawer cabinet Type: Measuring table with aluminium measuring plate Dimensions: 80 cm wide, 75 cm deep and 95 cm high (2.26 cm high with construction) Aluminium plate: 5 cm thick, with mounting threads Manufacturer drawer cabinet: Garant (Hoffmann Group) Psdpfx Aohvmkijahsgg Number of drawers: 2 Material: aluminium Condition: used complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2016, total width: 1,250 mm, total length: 2,500 mm, total height: 250 mm, overall weight: 800 kg, space requirement height: 1,000 mm, Measuring table, granite, on adjustable feet, last inspection 9.2000, very good condition Pgodjtvmdnjpfx Aaheg

Condition: excellent (used), Year of construction: 2017, For sale is a Jenoptik test table of the type T8000 Wavemove for housings The device was used for housing surface testing as the type describes and is in good to very good condition Year of manufacture: 2017 Weight: 2,500 kg Pgodpfomfty Hsx Aahog The offer includes the components shown as well as computers and software Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: excellent (used), Year of construction: 2000, For sale is a Jenoptik test table of the type T8000 Wavemove for housings The device is in very good condition and ready for immediate use with many additional attachments Year of manufacture: 2000 Weight: 2,500 kg The offer includes the components shown as well as computers and software Loading and/or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Pgsdpfx Aaovkxa Eohjg Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Year of construction: 1998, condition: excellent (used), Waste oil test bench Make SWEP Model B 5x10 dimensions LxWxH 115x105x115 cm Weight 132 kg Psdpfx Aeh Rnq Tsahogg

Condition: like new (used), Year of construction: 2021, We offer for sale a Jenoptik Formline Roundscan 535 form measurement machine. Pjdsx Ndnkepfx Aahjgg Suitable for measuring, for example, shafts. The machine has been used very little and is in like-new condition. Year of manufacture: 2021 Technical specifications

Condition: used, functionality: fully functional, total width: 700 mm, total length: 1,400 mm, total height: 500 mm, overall weight: 2,000 kg, space requirement width: 700 mm, space requirement length: 1,400 mm, space requirement height: 850 mm, Attention only measuring plate from CMM utilization with table frame Pgodpsvfn Ihefx Aaheg

Condition: used, Year of construction: 2001, functionality: fully functional, total width: 1,400 mm, total length: 3,500 mm, total height: 800 mm, overall weight: 7,500 kg, Measuring plate from CMM utilization with adjustable feet Pgodpfxeu Uiite Aahsg

Condition: used, ESD-Electrostatically Protected Workbench HANDKE Industrial Technology Height-adjustable worktable, workstation Single workstation E(lectro) S(tatic) D(ischarge) Table length: 1100 / 1700 mm Table depth: 600 mm Folding table length: 600 mm Working height: from 830 to 1200 mm - Volume-conductive ESD tabletop: 40 mm - Tabletop with hydraulic lifting system - Height adjustment via hydraulic pump with manual crank - Sturdy base frame made from aluminium system profile - Mobile on 4 small wheels (swivel casters) - Stable mount for monitor or rear panel sheet - 1 drawer compartment, W x D x H = 675 x 210 x 40 mm - 1 cabinet base unit, W x D x H = 160 x 580 x 560 mm Overall dimensions L x W x H: 1200 x 660 x 1560 mm Weight: 90 kg Pjdpfx Aoxf Uq Seahogg Very good condition, as new 2 units available Price stated per unit

Condition: used, table clamping surface: 228 x 273 mm 3 T-slots: 12 mm in between 4 x 4 threaded holes: M 8 table height at zero position: 146 mm Space requirement: 250 x 290 mm Podobbgcxepfx Aahogg Weight: 41 kg

Condition: used, Programmable AC power source voltage regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values - Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FEATURES: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limit - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combination for immediate recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short circuit protection - Temperature controlled fan speed - Self-test when switched on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Pgododz Srbspfx Aaheg Space required H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition 2 pieces available, price per piece

Condition: used, Test console, test station, measuring station, test device, measuring instrument, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage tester The PE/IS/HV SCT 42 / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective earth voltage drop in accordance with VDE0113 or IEC regulations per EN60204, Part 1. Serial No.: 0064016 Year: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective earth resistance measurement - Insulation resistance measurement - Protective earth voltage drop measurement The 90-1V unit provides a highly stable DC voltage with low ripple. One output terminal supplies the high voltage, while the other is near earth potential and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year: 2000 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Interference suppression: according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Pgjdpfx Ajf Axn Ajahog Serial No.: 0097588 Year: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on mobile frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57819, 57820, and 57821

Condition: used, Programmable AC power source voltage regulator Laboratory Power Supply, Power Supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Input values - Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values- Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. Output current: 15 A / 7.5 A Output power: 1500 VA Efficiency 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation 0.1% Output frequency: 45 - 1000 Hz. Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output cut-off relays - EEPROM memory for user-defined voltage and frequency combination for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Over voltage, under voltage, over power, over current, over temperature and short circuit protection - Temperature-controlled fan speed Podpfsdz Srasx Aahjgg - Self-test when switching on - Supplied as shown, without additional accessories and connection cable Additional connections: - BNC (EXT VREF) - 9 Pol. D-Sub (RS-232C interface) - 24 Pol. Centronic (GPIB) Space requirement H x W x D 221.5 x 425 x 567 mm Weight: 23 kg good condition

Condition: used, Test bench, test station, measuring station, test device, measuring device, tester for HV, PE, and IS measurement ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 High voltage test device Peded Dc Unopfx Aahjgg The device PE/IS/HV / 91-3J.3 is used for testing dielectric strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 or IEC regulations according to EN60204, Part 1. Serial no.: Year of manufacture: 2003 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable DC voltage with minimal ripple. One output terminal supplies high voltage, the other output terminal is close to earth potential and can be set to a maximum potential of 300 V. Serial no.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A EMI suppression according to VDE 0871 Rated output: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial no.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Compact unit on roller frame - Various connection cables and accessories as shown Overall dimensions (L x W x H): 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices under stock numbers 57820 and 57821

Condition: used, Year of construction: 2005, operating hours: 22,245 h, functionality: fully functional, machine/vehicle number: ENZ 6CAL, Equipment: CE marking, Used, Working environmental chamber, ESPEC ENZ-6CAL, Air cooled, temperature only, -70C to +150C, 8C per minute cooling, Pgedpewy Uqwjfx Aahog Internal dimensions (W,D,H) 600mm, 743mm, 850mm. Comes with calibration.

Condition: good (used), Granite Measuring Plate 760 x 1190 x 700 mm Dimensions: H x W x D 760 x 1190 x 700 mm Material Thickness: 800 mm Find more items – new and used – in our shop! International shipping costs on request! Pjdsxl Rkujpfx Aahogg

Condition: ready for operation (used), Year of construction: 2005, A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible. Psdsxltu Nopfx Aahsgg

Condition: excellent (used), Granite Measuring Plate Vibration Insulated  Measuring plate made of grey-black granite  as a base for assembly, control and laboratory purposes Outer edges visibly ground Stainless steel threaded and fitting holes Base with vibration insulation (membrane air spring insulators) Panel size 2000 x 1450 x 400 mm (WxDxH) Weight approx. 4000 kg Further measuring plates in other sizes - new and used - can be found in our shop! Pgsdpfx Aaeh Ri Auehog International shipping costs on request!

Condition: like new (used), Year of construction: 2012, Parker Engineering & Design Vertical Light Stack Module For testing solar modules Photovoltaic modules Electrical and mechanical safety testing Support for product development, design and quality control Detection of potential problems during development Quality and safety control  Endurance test stand  Temperature control  Mobile on rollers Entry pockets for forklift trucks 400 VAC, 3.PH, 50 AMP IR. 10,000 amp Pgsdpfoh Rvh Sjx Aahog Year 2012 Weight 1400 kg Further test equipment - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Bosch starter service life test The machine is a Bosch in-house production. It is used to check the service life or durability of starters (also starter motors) of engines. Pedpfx Asg Ith Rsahsgg Manufacturer: Bosch Type: Machine for testing the service life of starters Condition: used  Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: good (used), Thyssen measuring plate / control plate made of natural hard stone length: 3000 mm width: 1500 mm thickness: 300 mm Flatness tolerance according to DIN 876/0 Target value 16 µm Actual value 13.3 µm Ident. no.: 14286 2 x T-slot with base frame Pgjdpsihfm Hjfx Aaheg 6 x Wenzel Precision roll-off stands Concentricity tester with height adjustment heavy duty version With T-nuts High accuracy due to backlash-free roller bearings Roller block can be adjusted in height for diameter compensation. RRP pair 1890,-€ More measuring plates in other sizes- new and used - find