A head welding machines
5
Cleaning automat
5
Clinching cut saws
4
Complete production lines
6
Copy milling
15
Corner crimping machines
1
Corner finery automat
8
Cutting and machining centres
10
Door volume drill presses
7
Double mitre saws
14
End milling machines
6
Glass border NSA gene saws
9
Glazing presses
2
Lower floor panel saws
1
Mitre saws
5
Multi-head welding machines
11
Other
21
Reinforcing nut runners
2
Screwing automat
4
Spindle copy milling
1
Stamping machines
3
Table circular saws
1
Water-slot-mills
6
Welding machines
23
Wing fitting act ions
4
Window production machinery offers
5
Window rubber, cutting machine, gasket cutter, pneumatic lamellar cutter, blind cutting device
-Lamellar cutter: for PVC and aluminum blinds, pneumatic
-Manufacturer of pneumatic components: Festo
-Dimensions: 680/340/H470 mm
-Weight: 55 kg
Cupz7ol
5
Length: mm
height: mm
power consumption: A
welding current: 440 A V
total power requirement: 24 kVA
weight of the machine approx.: auf Anfrage kg
dimensions of machine: 1,1 x 0,50 x 1,1 m
Schweißgleichrichter
MIG / MAG
mit Schlauchpaket 4 Meter
Massekabel und Zange
Drahtvorschubgerät Vorschub 0,5 - 24 m/min.
Sqo7ng39
Gleichstrom
Leistungsbereich 50A / 16 V bis 440 A / 36 V
Kühlungsart F wassergekühlt
Schutzart IP 22
wie beschrieben und steht
5
Second hand machine
Used water slot cutter from Haffner company type WS 392
Machine no. 492
engine power 1200 watt
Cpa8boaf
Motor speed 18.000 rpm
Availability: by arrangement
Location Hochheim
2
Two-spindle copy router make ELUMATEC type KF 78
machine. # 32004 Year of construction 1989
Technical data:
Profile height max. 60 mm
Qsimp
milling area horizontal 180 x 70 mm
milling area vertical 300 x 95 mm
stroke 110 mm
Speed drilling 6000 rpm.
Speed milling 12000 rpm.
Compressed air supply 7 bar
Air consumption per working cycle 12 l
Drive power 740/800 W
outer dimensions 950 x 850 x 1550 mm
weight approx. 270 kg
used, in good condition
1
cutting range 90°: 90 mm
cutting range 45°: 75 mm
Dwikli
Saw blade diameter 315 mm
Table dimensions 800 x 500/400 mm
Saw blade 30 mm
machine weight ab. 45 kg
dimensions 850 x 600 x 430 mm
Discover more used machines
8
dimensions of the machine ca. L 1,2 x B 1,46 x H 1,65 m
weight 0,5 t
voltage 400 V
We estimate that the machine is in good condition
and can be viewed live by appointment.
technical features:
- Wavelength 1064nm
- Pulse max.3000W
- Pulse min.300W
- se energy 80J
- se frequency 400Hz
- Pulse duration 0.3-10 ms
Xaomq0xd
- max. power requirement 5,3kW 20A
*** Accessories, tools and clamping devices shown are only included in the
scope of delivery
if this is noted in the additional information...
6
Fighter welding machine, butt welding machine
-pneumatic workpiece clamping
-Foot switch
Qktsmvvta
4
Length: mm
height: mm
power consumption: 360 A
welding current: Gleichstrom V
weight of the machine approx.: auf Anfrage kg
dimensions of machine: 1,7 x 0,60 x 0,95 m
capacity: 19,5 kVA
Welding rectifier / transformer
E-welding and TIG
Cooling type F
Protection class P 22
Insulation class E
Power requirement at 60% = 29 kVA and at 100% 22.6 kVA
Bunn823onl
On sale without hoses package.
10
Sawblade tiltable 45 °
cutting width 45° 160 x220,90°160 x 310 mm
Motor output 2,2 kW
Saw blade 30 mm
Dimensions (L/W/H) LBH 0,8 x 1,0 x 1,3 m
machine weight ab. 300 kg
Cbrrz90tln
Speed 2800 U/min.
Saw blade diameter 500 mm
- incl. roller conveyor with electronic length stop 4,500 mm
(We couldn't start the roller conveyor, probably operator error)
- incl. additional saw blade
9
Machine is in very good condition. The set includes working elements not visible in the photos. Worldwide delivery possible.
Cdfdcuj77o
6
PDP F125
Milling machine for T-joints
Shaft size 27mm
Engine 1.5hp 2800rpm
Very neat and well-functioning machine
Bhxwb9p9c
Like new
2
saw blade diameter 370 mm
cutting range round 115 mm
cutting range square 105 mm
cutting length min. 730 mm
cutting range flat 70 x 240 mm
cutting lenght max. 4000 mm
saw blade turning speeds 1250 / 2500 U/min
table rotating 180 °
stroke 120 mm
feed stepless 0 - 500 mm/min
coolant
Mulv80
capacity 45 degrees: square 95 mm
capacity 45 degrees: flat 50 x 200 mm
cutting speed 1250 / 2500 m/min
weight of the machine ca. 1,1 t
dimensions of the machine ca. 5,00 x 1,30 x 2,00 m
- Fabr. - No.: 2823...
5
Single head fighter, welding machine, single head welding machine, fighter welding machine, butt welding machine
-Tension: pneumatic
-Weight: 270 kg
Qk3tpkgzk
3
Length: mm
height: mm
power consumption: A
capacity at 100% ED: 400 A
capacity: 60% ED = 500 A
welding current: Gleichstrom V
weight of the machine approx.: 230 kg
dimensions of machine: m
capacity: 21 kVA
Welding rectifier
MIG / MAG
Cooling type F
Protection class IP 23
insulation class F
incl. wire feed device, feed rate 0,5 - 20 m/min
Ground cable/pliers
Pbcff
Hose package 4 meters new
10
Offer 22271
Technical data:
- Fully automatic plastering of visible surfaces, external corners ,
- sealing grooves , inside corners on PVC window frames + sashes
- window sashes
- min. / max. profile width up to approx. 30 / 150 mm
- min. / max. profile height up to approx. 30 / 140 mm
- Processing time per window corner 12 to 23 sec.
- pneumatic connection 6 - 8 bar
- air consumption approx. 150 l/min.
- connection 400 V / 2,2 kW
- Space requirement approx. W 1200 x H 1650 x ...
9
Cutting length 4000 mm
Drive 2,6 kW
cutting width 420 mm
Cutting depth 130 mm
turning speeds 2800 U/min
saw blade diameter 400 mm
B0xiqkxsiu
3
Drive 2 x 3kW three-phase motors 400 Volt
Swivel range stepless motorized 20° to 90° (optional 135°)
Saw blade 500mm diameter
Saw feed pneumatic (optional hydropneumatic)
cutting length 3.700mm
Profile clamping 2 x horizontal clamping cylinders
2 x vertical clamping cylinders (optional)
Length adjustment central aggregate adjustment via electronic position control
Wlg3ixg2
2
saw blade diameter 400 mm
Bfi0ljejgo
cutting diameter 130 mm
stroke 135 mm
mitter cutting - all-position 0-45 °
turning speed range 1420 / 2840 U/min
capacity 45 degrees: square 110 mm
capacity 45 degrees: flat 50 x 240 mm
capacity 90 degrees: flat 95 x 240 mm
capacity 90 degrees: round 130 mm
capacity 90 degrees: square 120 mm
voltage 400 V
total power requirement 3,7 / 4,5 kW
weight of the machine ca. 600 kg
dimensions of the machine ca. 1,15 x 1,20 x 1,60 m
- Serial-No.: 102752
- cutting r...
4
Window rubber, cutting machine, gasket cutter
-Stops: 2
Qlbudt9gf
-Dimensions: 2500/600/H1000 mm
-Weight: 15 kg
3
Length: mm
height: mm
welding current - continuous: 320 / 100 A
Nl87r
protection class: IP21
total power requirement: 17 kVA kVA
weight of the machine approx.: 132 kg
dimensions of machine: 1,3 x 0,5 x 0,9 m
- TIG - E-Welding
- AC and DC welding current
- Cooling mode AF
6
Glasing beat saw
ELUMATEC GLS 192
Technical data:
C0pcyu9
Saw blade diameter 200 mm
Blade rotation speed 2800 RPM.
Power output 0.9 kW
Dimensions approx. 510 x 1200 x 1180 mm
Weight approx. 140 kg
used, in good condition
Gasket Router HDF4-3
Bz8zi3c9ir
Simultaneous processing of two profile ends in one operation. Automatic adjustment of the stop gasket and glass gasket position. All gasket levels (except the middle gasket for sash profiles, see HDF4-4) can be routed at the same time. In contrast to the use of hold-down devices during welding, the elasticity of the seal is retained.
Why WEGOMA?
- Simultaneous processing of two profile ends in one operation
- Automatic adjustment of the end / glass gasket positio...
7
ORION AND SN
Automatic single-headed welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
FUNCTIONS:
- Pneumatic work
- Seamless and standard welding
- One-button welding mode changeover
- Welding between 30˚ and 180˚
- Automatic process from start to finish
- Welding time control and digital temperature control
7gejx2o
- Temperature control from 0˚ to 350˚ with electronic thermostat
- PLC control system
STANDARD EQUIPMEN...
3
Good condition 3 spindle router KF457
Qqso2
5
Single head welding machine, plastic machine, fighter welding machine butt welding machine
-pneumatic workpiece clamping
-Foot switch
-Dimensions: 1450/1100/H1750 mm
Lh9hb
-Weight: 500 kg
2
Length: mm
height: mm
welding current - continuous: 320 A
protection class: IP21
total power requirement: 17 kVA kVA
weight of the machine approx.: 132 kg
dimensions of machine: 1,3 x 0,6 x 0,9 m
Betawluhjq
TIG and E-Welding
- Cooling type AF
1
Pertici mitre saw for cutting of aluminium / PVC profiles, blade diameter 330 mm
Cdakcwvwmc
Copy Router with Triple Drill SK21
The SK21A copy router with triple drill is the ideal machine for automatic olive hole drilling and gear box milling in plastic and wooden profiles.
Vialmfax
Why Choose WEGOMA?
- Powerful three-phase motors
- Easy setting of overlap thicknesses and backsets using revolver stops
- Four different positions for the lock case and four different immersion depths for the triple drill
- Automatic workflow
- Function: only drilling, or only milling
- You can process yo...
11
ORION II SN
Automatic double head automatic welding machine for PVC profiles (seamless and standard welding)
APPLICATION:
Used to weld plastic profiles at different angles
FUNCTIONS:
⦁ Pneumatic work
⦁ Automatic process from start to finish
⦁ Welding time adjustment, digital temperature control
⦁ Temperature control from 0º to 350º with electronic thermostat
⦁ Welding from 30° to 180° with single head
⦁ PLC control system
⦁ Easy Teflon replacement system
Muvqww
STANDARD EQUIPMENT:
⦁ Right and le...
3
SAF 363 in good condition
F7yod8fx
4
Haffner mitre saw
B2cpxmpzz9
Type: KL 176
Serial number: 1097
Operating voltage: 380 V
Rated current: 10 A
frequency: 50 Hz
Power: 1,9 kW
For sale is a functional Haffner rip saw. It comes from a carpentry liquidation.
The offer is addressed to self-collectors.
Loading with a forklift is possible.
3
Length: mm
height: mm
welding current - continuous: 400 A
protection class: IP21
I9eqt7d
total power requirement: 23,2 kVA kVA
weight of the machine approx.: 128 kg
dimensions of machine: 1,3 x 0,5 x 0,9 m
- TIG - E-Welding
- AC and DC welding current
- Cooling mode AF
2
V-notch saw, Haffner KL 176, used for PVC profiles
Cdaj9ehs2w
14
Length Stop LA630
Robust length stop with 15″ industrial touch display and modern control with complete profile management and online data connection. Short positioning times thanks to dynamic servo motor.
Why WEGOMA?
- Stable sheet metal construction
- Specification of target value, number of pieces, correction value and record number via the robust, dust and splash-proof industrial touch display. Complete profile management in the control
- Jetter drives and controls
- Backlash compensation,...
4
GALAXY - III (PVC)
Milling copier with triple socket for drill bits (handle) and water drainage channel boreholes for PVC profiles
APPLICATION:
Used for cutting out handle sockets in aluminium and PVC profiles (openings, sockets for mounting locks, grips, hinges, opening channels etc.).
FUNCTIONS:
- Ease of use and operational safety through ergonomic design
- Possibility to open different channels independently of copy sets
- Copying sets
- Pneumatic clamps
- Triple drilling jack
- Possibility ...
3
GLA 303 in very good used condition with stop.
Djw9ubc
5
Rotox EPA 479 FOR SALE. For-axle with profile recognizer, automatic milling machine wiht table controlled by Windows. Uploaded profile systems: GEALAN. Length: 6m Width: 4 m
Bche9ki0
4
Length: mm
height: mm
power consumption: A
capacity at 100% ED: 400 A
capacity: 60% ED = 500 A
welding current: Gleichstrom V
weight of the machine approx.: 230 kg
dimensions of machine: 1,05 x 0,70 x 1,2 m
capacity: 21 kVA
welding device with feed FU 30
- control via switch 2/4 beat 64 welding steps
- water and air cooled (switchable)
- without hose package
- with intermediate hose package 13,5m
- without burner head
Welding device is functional.
Bunn3gb2zc
4
Circular saw for cutting the edge of the sashes
Cdajp72t8d
Double Miter Saw DS150
Universal double miter saw for PVC, aluminum, and wood. Thousands of satisfied customers worldwide agree: The quality of the WEGOMA DS series is unmatched in the industry. The latest model in our DS series offers higher cutting capacity with the same quality and precision.
Why Choose WEGOMA?
- Large cutting area
- Double cut
- Fix intermediate degrees continuously
- Pneumatic tilting as standard
- Torsion-free machine bed
Bz8zr0gibp
- Tilting range for both units 45° (22....
9
ALCOR II R
PVC cutting centre
Used for cutting, milling, punching and marking on 4 surfaces of PVC profiles.
Servo-controlled cutting
Servo controlled pivot axis
Automatic positioning in all degrees between 30° and 150° with servo drive
Robot with pneumatic handle and servo axis control and manual adjustment function for accurate profile positioning
Industrial PC with Windows-based touch screen and easy to use practical interface
Remote access Data transfer with remote control Network connection...
2
Rotox KF 450. good condition.
Ccspy9ubp8
5
4 head welding and corner cleaning machine from Urban
Cchwflbvqi
Year of production: 2007
Machine is in Germany
