Used granulating plants for sale (37)

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Chjdpfx Agjumubystob Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February.

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) Chjdpfxozb Dp Ro Agteb RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.

Year of construction: 1988, condition: good (used), functionality: fully functional, machine/vehicle number: MGL 250M, DC MOTOR, GEARBOX, 256 KW – IN OPERATIONAL CONDITION. Chsdpfx Aszc Hzlogtsb MACHINE HAS ALREADY BEEN TESTED BY US.

Year of construction: 1995, condition: used, functionality: fully functional, GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm​ Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Chjdsyf E N Tepfx Agtob Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

Year of construction: 2011, operating hours: 2,600 h, condition: used, functionality: fully functional, Cable granulator for processing cable scrap Shredder + WS15 granulator + belts Technical data Throughput depends on material and screen, max. 500 kg/h Operating hours approx. 2600 h Total weight 5.7 t Height 2.75 m Width 7.9 m Depth 10.1 m Power consumption 58 kW at full load Power consumption 42 kW at idle Connection 400 V/550 Hz (fuse rating 125 A + 80 A slow-blow) The system is assembled (demo unit) and can be inspected and demonstrated on site. System overview 1x ICS CONTECT Pre-shredder Carrera-6D.LN WS15 1x ICS CONTECT Radial fan MGTN7 1x ICS CONTECT Shredder 40/60 VGA Chsdpsza Ahcofx Agtob 1x ICS CONTECT Separation table DK 20.II 1x ICS CONTECT Mobile extraction system U-3000 1x ICS CONTECT Conveyor belt bg GBF 1x Föratec Lifting and tilting device (not installed) 1x Ventilation system with various ducts (not installed) - Spare blades for shredder available

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Cedpfx Agozb Dr Setjhb Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Year of construction: 1999, condition: good (used), functionality: fully functional, Suite arrêt de production, ligne complète de granulation pour matières plastiques comprenant trémie de chargement, vis de chargement, Extrudeuse monovis diametre 105 avec vis forceuse, doseur, puit de dégazage, pompe à vide, filtre à tiroir avec groupe hydraulique, bac inox de refroidissement, sécheur de joncs, granulateur Buhler, tamis vibrant Avitech, soufflerie, cyclone et porte big bag. Vis et fourreau refait en 2021 (facture). Pupitre de commande refait. armoire électrique complète. La vis a un profil généraliste qui permet de regranuler du PE, PP, PS, ABS et PA principalement. Cedpfx Asu E E Ezsgtjhb

Year of construction: 2019, condition: ready for operation (used), Wittmann MAS 2 Granulate Mill / Cutting Mill / Grinder / Granulator, Plastics, 2019 Grinding chamber: 247 × 255 mm Cutting motor: 4 kW Chodpfx Agoyw H Uioteb Year of manufacture: 2019 Weight: 220 kg Serial number: WTM10776 You are welcome to arrange a viewing. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice (excluding VAT) can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers. Specified company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data or errors in the description of the item may occur and are subject to change.

Year of construction: 2023, operating hours: 20 h, condition: new, functionality: fully functional, machine/vehicle number: 201023, DICER MOD. F-36 HEAVY SERIES SOUNDPROOF DICER for granulating continuously extruded plastic sheets, for thermoplastic products. Maximum width of the sheet to be ground 350 mm and thickness 6 – 8 mm. HP 20 V. 400 Hz 50 motor Rotor in wear-resistant steel with high chromium content, multiple blades with 14 cuts and speed from 10 to 30 m/min. Transmission by belts Steel towing rollers with progressively variable trino speed and in accordance with the number of cuts. Size of the granule obtained 3 x 3 mm Chjdsv Tadwspfx Agtjb Pneumatic presser Base in solid steel structure The machine is soundproofed Electrical panel in compliance with CE standards with remote control switch and safety micro. SPEED VARIATOR WITH INVERTER

Condition: excellent (used), functionality: fully functional, EKOCHEM Underwater Granulation Head RW-440-II - Water Ring Granulation - WRG The EKOCHEM RW-440-II is a high-performance underwater granulation head for processing a wide variety of polymer materials. Its robust construction, pneumatic knife pressure system, and closed water circuit ensure reliable and economical operation, even with high throughput rates. A suitable centrifuge for drying the granules is already installed together with the granulation unit. Technical Data * Model: RW-440-II Codpfx Ajznu S Usgtohb * Throughput: 600–1,500 kg/h * Number of granulation knives: 4 * Cutting knife speed: 2,910 rpm * Cutting knife drive power: 3.0 kW * Heating zone power: 3.8 kW * Max. operating temperature: 280 °C * Max. permissible melt pressure: 120 bar Features / Advantages * Compact and robust design * Pneumatic knife pressure system * Precise knife centering thanks to linearly guided knife holder * Fast and easy knife change * Free access to the interior for maintenance work * Short setup and maintenance times * Suitable for a wide range of polymer materials * Granule size can be individually adjusted The system is in very good condition, fully functional, and immediately available from stock. An inspection can be arranged at any time.

Year of construction: 2023, operating hours: 5 h, condition: as good as new (ex-display), functionality: fully functional, rotor diameter: 420 mm, rotor width: 800 mm, Genox GC800T Series - High Performance Granulator suitable for processing various materials including plastics, wood, rubber etc. 37kW Drive Motor with outboard rotor bearings, heavy duty precision machines rotor, and 580rpm operating speed as standard. 800mm wide x 420mm diameter cutting chamber with heavy duty, high inertia Cascade Rotor with 24 x rotor knives. Two rows of counter knives are mounted in the chamber. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. An electric assisted chamber opening with actuator with integrated safety interlocks and a setting jig is for pre-setting of knives off the machine are provided to enable quick, easy knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). Chsdpezudnxofx Agtjb We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. This machine is as new and in stock at our warehouse in the UK and has only been used previously for exhibition displays. Significant saving available over a newly built machine machine.

Year of construction: 2019, condition: ready for operation (used), Output: 50-300kg/h, operational hours counter: 10h, with edge trim extraction. Chedpfxsp Du Aae Agtsb

Condition: used, Nieużywany rozbrylacz/kalibrator Gericke model 450x680. Wykonanie ze stali kwasoodpornej. Napęd silnikiem el. 5.5 kW, 1445 obr/min przez reduktor. i= 26.04/1. Chedpfx Aezbuchogtob Robocze obroty rotora ok 55,49 obr/min.

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, controller manufacturer: Siemens, The system comes from current production. TECHNICAL DETAILS Screw diameter: 2 × 75.0 mm L/D ratio: 38 D Design: Co-rotating MACHINE DETAILS Control system manufacturer: Siemens Drive power: 180 kW EQUIPMENT 2 dosing units Water bath Chsdpfxsztw Agj Agtjb Granulator Vacuum degassing Segmented screws and cylinder

Condition: like new (used), functionality: fully functional, Nordson Hydraulic Screen Changer / Start-Up Valve For sale is a like-new Nordson / Kreyenborg hydraulic single-piston screen changer. The unit is ideal for extrusion lines and can be used as both a conventional screen changer and a start-up valve. Technical Specifications: • Screen area: 27 mm (see photos) • Design: hydraulic, with hydraulic cylinder Chjdpfx Aowb Dc Sogteb Optional: Hydraulic station Condition: • The unit has been tested and is fully functional. • Ideal as a cost-effective solution for start-up or cleaning processes.

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Tria Model: 70 kW Condition: ready for operation (used) Cedpfewnx H Sox Agtshb RIA S.p.A. Ideal for medium-to-high throughput applications. Designed for efficient inline or standalone size reduction of sheet, cups, profiles, and other plastic waste. Construction: Built-heavy-duty, suitable for inline integration under thermoformers or as standalone units.

Year of construction: 2022, condition: new, functionality: fully functional, overall weight: 9,500 kg, total length: 2,750 mm, total width: 2,670 mm, total height: 4,630 mm, rotational speed (min.): 520 rpm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. Grinding space : 1200 x 1100 mm Drive motor power : 110 kW Chsdpfx Agsrbk Hcjtjb Knives on rotor : 7 x 2 Fixed knives : 2 x 2 Weight : 9500 kg The GXC series of mills, using motors from 55kW to 315kW, is specially designed for high efficiency of the grinding process. Thanks to a variety of rotor configurations, these mills have a wide range of applications for small and hollow materials such as plastic drums, crates and chairs, very flexible materials such as foils, big bags, and rubbers. They are also suitable for grinding thick and hard materials such as plastic board profiles. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Unused machine available on hand, possible tests before purchase. (dozens of machines in stock) If you are interested in GENOX machines from countries such as the UK, Germany, Portugal, Hungary, Spain, Russia, France and Turkey, please contact the Genox dealer directly in these countries. If you are from another country, please contact us and we will help you choose a machine and conduct tests in Poland.

Year of construction: 2020, condition: as good as new (ex-display), No .: 2547 1 Strand- Pelletizer Alphatec NEW Type AS-G 100 E Working width 100 mm Take-off speed up to 90 m / min Number of strands ≤ 14 Cjdpogbfc Esfx Agtshb Rotor Ø 200 x 100 mm with carbide cutting bars Number of teeth 32 Pressure roller Ø 120 x 100 mm Year of construction 2020 Throughput approx. ≤ 300 kg / h depending on the strand / material specifications Drive 4 kW - FU speed controlled More pelletizing units ex our stock Wuppertal-Germany available, you´re welcome for inspection visit, date by appointment

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Chodpfewk Nk Tjx Agtjb

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 660 mm, rotor width: 1,200 mm, Genox GXC1200T Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 90kW Drive Motor with outboard rotor bearings (110kW & 132kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 1,200mm wide x 660mm diameter cutting chamber with a choice of either a 10 knife/5 row or 14 knife/7 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. Chsdpfx Agezudmzetjb All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 55 kW (74.78 HP), rotor diameter: 520 mm, rotor width: 1,000 mm, Genox GXC1000 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW, 110kW & 132kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1000mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 50 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. Cedpfezudnfex Agtehb All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 15,500 kg, rotor diameter: 800 mm, rotor width: 2,000 mm, power: 250 kW (339.91 HP), rotational speed (max.): 480 rpm, Equipment: rotational speed infinitely variable, Genox GXC2000G Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 250kW Drive Motor with outboard rotor bearings (200kW - 315kW drive options are available), heavy duty precision machined rotor, and 480rpm operating speed as standard. 2,000mm wide x 800mm diameter cutting chamber with a choice of either a 5, 7 or 9 row V Cutting Rotor. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Codpszudm Usfx Agtohb Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2000, condition: reconditioned (used), Stock - No.: 2107 Chjdpfx Agjiyyc Eotjb 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )

Year of construction: 2026, condition: new, functionality: fully functional, rotor diameter: 520 mm, rotor width: 1,200 mm, Genox GXC1200 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW & 110kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1,200mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 60 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Chedpfx Aozudnrogtob Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required.

Year of construction: 2008, condition: good (used), functionality: fully functional, Used strand granulator Year of manufacture: 2008 Scheer SGS 100-E4 Condition: good, functional tested Codpfjhfmrtsx Agtshb Available immediately