Used heating & cooling units for sale (153)

Condition: used, circulating medium 25 °C Ncjdpfx Ahjy Erz Do Njr Cooling capacity 10 kW Rated power supply 5,45 kW Operating/control voltage 400-415/24 V / 50 Hz Rated current/max. fuse 15,2 / 25 A The temperature control units are, in our assessment, in good used condition. The offer includes two units. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, max. temperature 160 °C operating pressure 20 bar heating capacity 8 kW Cooling capacity 30 kW Capacity 1 kW rate of flow 60 l/min The temperature control unit is, in our assessment, in good used condition. The offer consists of 4 units: Ncodpey Erzkofx Ah Nsr 1 x manufactured in 2002 1 x manufactured in 2005 2 x manufactured in 2011 Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, functionality: fully functional, machine/vehicle number: 04217, For sale is a reliable and robust temperature control unit from Regloplas, model 90S. Used condition, with age-appropriate signs of wear on the housing. 3 units available. Technical data Type: 90S / 6 / TS22 / 1K / RT45 Max. temperature: 90 °C Ncodpjy E Hzrofx Ah Nor Heating capacity / power rating: 7.1 kW Voltage: 400 V / 3 PE (three-phase) Frequency: 50 Hz Current: 11 A Filling volume: 3 l Wiring diagram no.: 04217

Year of construction: 2022, condition: used, current capacity 22 KW total power requirement 22 kW weight of the machine ca. 141 kg dimensions of the machine ca. 0,8 x 0,6 x 1,2 m Induction device for heating up metal parts such as screws, nuts, sheets etc. Device works with liquide cooling. Nsdpfx Ahjy Dh Hyo Njcr

Year of construction: 2018, condition: as good as new (ex-display), functionality: fully functional, PT+PSG profiTEMP+24 Hot Runner Control Unit with 36 Control Zones Ncedpfx Ajyhcqmeh Nor For sale is a PT+ PSG hot runner control unit with 24 control zones, in perfect technical condition. The device has recently been fully checked, is running on the latest software version, and is immediately ready for operation. Technical details: 24 control zones 522 wiring – sensors and heaters separated Mains plug 63A Software & electronics freshly checked Condition: used, but absolutely flawless Demo unit Original price €7,500

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Ncsdpfx Aeyzmagsh Ner Year of manufacture: 2008 Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water

Condition: used, Year of construction: 2011, We are offering this very rarely used oil temperature control unit. It was used for research purposes. The unit still contains the thermal oil. The two connection hoses (without guarantee) are also included. Njdpfx Ajyk Dw Tsh Necr Please send your price proposal—and allow us some time to respond, as we handle this alongside our main business activities. The unit must be dismantled and disconnected by your own qualified personnel, insofar as this has not already been done. All transport-related procedures and requirements must be carried out at your own cost and risk. The buyer is liable for any (consequential) damage that occurs on the premises. Collection must be completed within 14 days after the sale.

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: 1916180-002656, - Type: PSG ProfiTEMP+ 66 zones Nodpfxey Ah Dvj Ah Njcr - Year of manufacture: 2019 - Serial number: 1916180-002656 - Power supply: 230 VAC (3~ / N / PE) 50/60Hz - Power: max. 43kW, 3x63 A - Connections: XS3 RJ45, XS1 RS485 - Condition: Used only for test moulds - Brand: PSG Plastic Service GmbH - Extras: 8x cable with 24-pin plug & manuals

Condition: used, Year of construction: 2015, functionality: fully functional, The three temperature control units from BoeTherm are for sale. They have all been tested in my workshop and are fully functional. The price is per unit!!! 1. BT-90-9-D2 from 2011, €1,255 2. BT-95-09-D2-M3-V5 from 2015, €1,255 Nsdsxpt Rropfx Ah Necr 3. BT-95-09-D2-M3-V5-VA-MS from 2015, €2,250 Medium: Water Heating capacity: 9 kW Pump capacity: 84 L/min Pump pressure: 2.8 bar Tank volume: 6 liters Dimensions: L: 650 mm, W: 265 mm, H: 650 mm, Weight: 45 kg

Condition: like new (used), Year of construction: 2019, operating hours: 3,825 h, functionality: fully functional, The Wittmann plus D140 temperature control unit is for sale. The device was used in a technical center, which explains the low operating hours. Original price: €5,260 - Max. water temperature: 140°C in the mold supply line - Max. system pressure: 10 bar in the mold return line - Pump: 0.5 kW (1.4A) / 50Hz, max. 40 l/min, max. 4.5 bar, seal-less and magnetically coupled - Heating capacity: 7.5 - 9 kW (11.5 - 12.5A) at 380 - 415V - Cooling capacity: 20 kW at ΔT = 75°C (indirect cooling) - Operating voltage: 3x 380 – 415 V, 50 Hz - Control voltage: 24V AC Ncodpoy Atnyofx Ah Nor - Power consumption: 14.5A / 9.5kW (the total connected load increases if options such as reinforced pump or additional heating capacity are added) - Main connection: 4m cable incl. 16A CEKON plug - WITTMANN 4.0 interface including license, with shielded RJ45 socket - USB port: socket for software updates and data logging - Mold supply and return: G3/4'' female thread - Mold circuit with angle-seat strainer, mesh size 0.25mm - Water inlet and outlet: G3/8'' female thread - Strainer in water inlet: G3/8'' female thread, mesh size 0.3mm - Color: RAL7047 (Telegrey 4), front RAL3004 (Purple red) - Weight: Net: 65 kg, Gross: 82 kg (incl. pallet and packaging) - Dimensions (L x W x H): 840 x 265 x 650 mm - Dimensions incl. pallet & packaging (L x W x H): 920 x 630 x 830 mm - Fill volume: 3 liters - Noise level: 70 dB(A) Media: - Process and cooling medium: water

Condition: used, Year of construction: 2019, functionality: fully functional, 1,0 St. gebr. Temperiergerät mit 48 Regelstellen Hersteller: GAMMAFLUX Typ: GS1G030F024S4EJ Ncjdpfxsyxxz Do Ah Njr Baujahr: 2019

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 154701, Type: 90S/6/TP20/2K/RT45 Power: 6.5 kW Nodpfx Aoy Agkneh Njcr Maximum operating temperature: 90 °C Medium: Water

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 260640, 261157, Type: P140S/6/B501/1K/RT45 Power: 6.9 kW Maximum operating temperature: 140 °C Medium: Water Pressurized temperature control unit Ncsdpfxoy Agi Rj Ah Ner

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 247580, 247422, Type: P140/9/SG51/1K/RT45 Power: 9.8 kW Maximum operating temperature: 140 °C Medium: water Nsdpfx Asy Agh Hjh Nscr Pressurized temperature control unit Two units available Price: 950 EUR per unit

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 310368, Type: P160/9/SG51/1K/RT45 Power: 9.6 kW Maximum operating temperature: 160 °C Medium: Water Nsdpfxey Aghye Ah Necr Pressurized temperature control unit

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Ncedpfox Emfkjx Ah Njr Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Ncsdpfx Ahjx Hgmwj Nsr Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Year of construction: 2005, condition: good (used), Hot Runner Temperature Control Unit PMS Systems K10-8 Hot Runner Controller Ncedpfxjytqvuj Ah Nsr Manufacturer: PMS Systems Limited Model: K10-8 Serial number: 00404-001 Date: 19.10.2005 Supply voltage: 415 V Phases: 3 / star Max current: 63 A per phase Frequency: 50/60 Hz Type: Hot runner temperature controller for injection moulding tools Connections: Multiple connections for heaters and thermocouples Mobility: Mobile industrial housing CE marking: Present Location: Freiburg

Year of construction: 2017, operating hours: 1,052 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN. S10008727, The dynamic temperature control system "vario" is designed for cyclic mold temperature regulation. It is equipped with a mold-proximate valve switching unit (piston accumulator) to supply the piston inserts with water at up to 200 degrees Celsius. The system will be inspected by Technotrans (GWK) prior to sale. Further technical details for the "vario" temperature control unit are available upon request. The complete system consists of: - Medium: Water up to max. 200°C - Heating capacity (heating circuit): 90 kW - Heating capacity (cooling circuit): 9 kW - Cooling: indirect Nedpsyxgnfofx Ah Nocr - Cooling capacity: 280 kW - 1 piece of 2-circuit vario system wh200 (cyclic temperature regulation of mold inserts) - 1 mold-proximate valve switching unit - 1 piston accumulator - 1 electronic control unit ESR (energy storage) - 1 water treatment unit - 1 hose and connection kit (optional, at extra cost) ...and much more – see pictures.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The hot runner controller from Hasco is for sale, including a few technical details. An operating manual is available in both German and English. Number of zones: 6 Dimensions: 434 mm x 226 mm x 365 mm Operating temperature: 0–50°C Display per zone: 2x three-digit, 7-segment display Control panel: 12 keys Electrical connection with CEE plug: 3x32A Nedsyxa Npopfx Ah Necr

Year of construction: 2024, condition: like new (used), WSIA-10 Chiller CE, 2024, Excellent Condition Price EUR 4,200 Description WSIA-10 Chiller CE for sale. Bought new in 2024 together with the injection moulding machines. In good working condition and ready for operation. Sold as a separate unit. Quantity available: 1. Technical Specifications Model: WSIA-10 Type: Chiller Version: CE Year: 2024 Condition: Good working condition Quantity available: 1 ⸻ Ncodpfxeyz Sm Se Ah Nor WSGP-400 Crusher CE, 2024, Excellent Condition Price EUR 1,500

Condition: ready for operation (used), Wittmann MTC Basic-C90 F27 Temperature Control Unit Single-Circuit Temperature Controller Price is for one unit. Several units available! Nedpfxeyw Rh He Ah Nocr Year of manufacture: 2017 Year of manufacture: 2017 Year of manufacture: 2018 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW You are welcome to schedule a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check our further offers. Company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data and errors in the item description may occur and are subject to change.

Year of construction: 2017, condition: ready for operation (used), Wittmann MTC Primus-C90 F27 Temperature Control Unit Single-Circuit Temperature Control Unit Price is for one unit. Year of manufacture: 2017 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW You are welcome to arrange an inspection. We are happy to organize an affordable shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are property of their respective owners and are used for identification and description purposes only. Technical data may differ and errors in the article description are possible and reserved. Ncedpfsyw Rfxox Ah Njr

Condition: used, For sale or free of charge are three climate smoke chambers manufactured by AUTOTHERM, including accessories. These units are ideally suited for meat and food processing, particularly for cold smoking. Technical Data / Features: Chamber 1: approx. 8 racks (W approx. 2.10 m x D 5 m) Chamber 2: approx. 10 racks (W approx. 2.10 m x D 6 m) Chamber 3: approx. 12 racks (W approx. 2.10 m x D 7 m) Cold smoke system with 2 smoke generators (Goliat, sawdust) Temperature range up to approx. +22 °C (hot water heat exchanger) Humidity control available Cooling coil (R232, R404) Ncedpfxsyw Hl Ie Ah Njr Some refrigerant compressors present Construction: Air ducts, wall cladding, and control cabinet made of V2A (stainless steel) Condition: Electronics/control currently non-functional Control cabinet available Condition as shown in the pictures Additional equipment / accessories: Smoking sticks (wood) 2 kettles Cooking chamber (for 2 racks) Cleaning machine (defective) Freezer Important notes: Available free of charge Dismantling and transport to be organized by the buyer Inspection possible by appointment

Condition: used, Tempering, Circulating fluid tempering, Thermolator, Used machine Ncedpjyrtk Sjfx Ah Ner Manufacturer: Industrial Frigo Típus: TW 9/95/x Year of manufacture: 2008 Weight: 190 Kg Overall dimensions: 1300 x 450 x 1200 mm Max. temperature: 95 °C Pressure: 4,35 bar Electrical data: 400 V ; 50 Hz ; 26 A ; 10 kW