Condition: used, B&R 2005 CPU module CP152- removed from Ferromatik E50 - removed from running machine - housing renewed - compatible with all B&R 2005 controls Cgjdpfxeyxg Tus Abwsr - fully functionalManufacturer: B&R type: CP152 spare part no.: 1676890710, 10010792 manufacturer No.: 3CP152.9

Condition: used, B&R 2005 NC150 counter module - housing renewed - compatible with all B&R 2005 controls - removed from Ferromatik E50 - removed from running machine - fully functional manufacturer: B&R type: B&R 2005 sparepart no.: 11124276 manufacturer no.: 3NC150.6 Cgodpsyxg Tnofx Abwor

Condition: used, MOOG D920-141 control valve- removed from running machine - fully functionalmanufacturer: MOOG type: D920-141 type code: R08KB910HXYX Cgjdpfxjyxg Tho Abwor

Condition: used, Ferromatik mixing screw Ø 70 mm for IU2495 and IU2650- removed from Ferromatik K-Tec 450 - removed from IU2495 Cgodpfxeyxg Tbo Abwor - removed from running machine - fully functional- inlet: 69.80 mm - center: 69.80 mm - outlet: 69.80 mm - total length: 225.80 cmmanufacturer: Ferromatik Milacron

Condition: used, Harmonic Drive planetary gearbox HPS-180-5-Di- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine - fully functionalmanufacturer: Harmonic Drive type: HPS-180-5-Di spare part no.: 12171266 Cgsdjyxg S Ropfx Abwjr

Condition: used, Rexroth proportional directional control valve with regulator- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine - fully functionalmanufacturer: Rexroth Cjdpfxjyxg S Ds Abwegr type: NG10 spare part no.: 10848665 manufacturer no.: R900969493, R900031884 type code: 4WRSE 10 Q00-3X/G24K0/A1V-588=DE (4WRSE 10 Q00-32/G24K0/A1V-588=DE) / 4WRSE 10 V.-A1-32The number before the first slash describes the device series. For this reason, this number in the type code may differ from that on your old spare part. If you have any questions about this, please do not hesitate to contact us.

Condition: used, Demag Ergocontrol IBED NC4- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine Codoyxg Swopfx Abwjgr - 1 cover missing - no effect on functionality - fully functionalmanufacturer: Demag type: NC4 spare part no.: 89380065 manufacturer no.: DIf the spare part is traded in an exchange procedure, a partial credit note will be issued after receipt of the defective part and inspection by the manufacturer. We reserve the right to refuse a credit note based on the condition or age of the returned part. The defective part must be in a repairable condition; the credit note will be issued after feedback from the manufacturer.

Condition: excellent (used), Year of construction: 2009, Clamping force: 320 t Clamping force: 3200 kN Opening force: 130 kN Opening force (boosted): 100 / 800 kN Opening stroke: 700 mm Mould height: 300–700 mm Distance between platens: 1000–1400 mm Cgedpfx Asyya Inobwsr Platen size: 1040 × 1040 mm Max mould weight (per half): 3600 kg Ejector force: 100 kN Ejector stroke: 250 mm Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 720 mm Distance between tie bars H: 720 mm Shot volume: 392 cm3 Pump drive power: 45 / 55 / 55 kW Dry cycle time: 3.5–504 s Total installed power: 70.5 / 89 / 96 kW Working hours: 53.212 h Type: Horizontal Drive: Hydraulic

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Number of axis: 3 Reach: 1500 mm Payload: 6 kg Cgjdpfxeyftw Ej Abwor X=420mm Y=1200mm Z=1500mm EUROMAP 67

Condition: ready for operation (used), Year of construction: 1997, operating hours: 111,569 h, clamping force: 10,000 kN, This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details. • Injection unit • Screw speed: 92 rpm • Injection speed stages: Cedpfsywlvrex Abwsgr • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection measurement stroke: 200 mm forward movement actually used to inject the shot • Metering stroke: approx. 465 mm maximum screw travel during plasticizing • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Closing pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Cylinder heater power examples: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. −1 K to +2 K • Condition / maintenance relevant data • Machine alignment tolerance:

Condition: used, Year of construction: 1992, machine/vehicle number: 293784, Drill spindles: 8 Drill spindle rotation direction: 4 right and 4 left Drill spindle speeds: 2800 rpm Cgsdjbnnybepfx Abwjr Shaft mount: 10 and 11 mm Drill stroke: 100 mm Drive motor: 380 V, 1.1 kW Table height above floor: 840 mm Space required: approx. 650 x 400 x 1700 mm Weight: 120 kg

Condition: excellent (used), Year of construction: 2015, clamping force: 1,000 kN, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Csdpox Tdp Njfx Abwogr Platen size: 590x600mm Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: ready for operation (used), Year of construction: 2007, operating hours: 91,708 h, clamping force: 8,000 kN, screw diameter: 135 mm, displacement volume: 8,870 cm³, total length: 11,810 mm, total width: 3,200 mm, total height: 2,900 mm, Clamping force: 8000 kN Tie bar spacing h x v: 1170 x 1000 mm Platen size h x v: 1550 x 1520 mm Min. mold height: 500 mm Max. mold height: 1100 mm Max. daylight: 2100 mm Opening stroke: 1600 mm Cjdpfx Aoyv E Hbobwogr Screw diameter: 135 mm Shot volume: 8870 ccm Injection pressure: 1640 bar Equipment Screen text in German Screen text in English CEE socket 16A CEE socket 16A CEE socket 16A Compact Flash drive Hydraulic core pull 1x Machine including handling Machine including safety enclosure Machine with water manifold EUROMAP 12 interface Handling interface USB interface Mold heater 16x Handling Technical Data Type of handling: Linear Brand: ENGEL Model: ERC 64/1-F Handling weight: 25 kg X-axis: 1300 mm Y-axis: 2200 mm Z-axis: 4760 mm Machine dimensions LxWxH: 11.81 m x 3.2 m x 2.9 m Total weight: 56,000 kg

Condition: used, Year of construction: 2004, operating hours: 76,000 h, total height: 2,480 mm, total width: 2,330 mm, total length: 9,830 mm, screw diameter: 70 mm, clamping force: 4,200 kN, displacement volume: 1,047 cm³, 2. Unit 55 with ø 22 Injection pressure: 1674 bar Codpfx Aoyv E Ewebwjgr Volume: 30cm³Distance between injection unit 1 and 2: 300 mm (piggy / Multinject) clamping force: 4200 kN distance between tie-bars h x v: 800 x 800 mm size of mould plates h x v: 1270 x 1200 mm min. mould height: 380 mm max. open daylight: 1400 mm opening stroke: 1020 mm screw diameter: 70 mm swept volume: 1047 ccm injection pressure: 1778 bar equipment included screen text german core pulling hydraulically 6x Machine without Handling machine without material hopper Anti vibration mounts mould heating 16x Injection moulding machine for two components measures of machine l x w x h: 9.83m x 2.33m x 2.48m total weight: 23090KG

Condition: ready for operation (used), Year of construction: 2005, operating hours: 59,000 h, clamping force: 4,200 kN, screw diameter: 60 mm, displacement volume: 769 cm³, injection pressure: 2,200 bar, total length: 6,830 mm, total width: 2,330 mm, total height: 2,480 mm, overall weight: 23,090 kg, Clamping force: 4200 kN Tie bar spacing (H x V): 800 x 800 mm Platen size (H x V): 1270 x 1200 mm Min. installation height: 580 mm Max. platen distance: 1300 mm Opening stroke: 720 mm Screw diameter: 60 mm Shot volume: 769 ccm Injection pressure: 2200 bar Equipment Display language: German Hydraulic core pull 4x Machine without handling Machine without material hopper Cjdjyv E Dajpfx Abwsgr Levelling elements Mould heating 12x Machine dimensions (LxWxH): 6.83m x 2.33m x 2.48m Total weight: 23090 kg

Condition: refurbished (used), Year of construction: 2008, operating hours: 26,033 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 75 mm, displacement volume: 1,657 cm³, injection pressure: 2,022 bar, total length: 7,200 mm, total width: 1,750 mm, total height: 2,420 mm, overall weight: 16,400 kg, clamping force: 4000 kN distance between tie-bars h x v: 710 x 710 mm size of mould plates h x v: 1010 x 1010 mm min. mould height: 300 mm Cjdpfoyv Ez Esx Abwsgr max. mould height: 710 mm max. open daylight: 1380 mm opening stroke: 670 mm screw diameter: 75 mm swept volume: 1657 ccm injection pressure: 2022 bar measures of machine l x w x h: 7.2m x 1.75m x 2.42m total weight: 16400KG

Condition: ready for operation (used), Year of construction: 2004, operating hours: 69,000 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, injection pressure: 1,441 bar, total length: 7,980 mm, total width: 2,200 mm, total height: 2,570 mm, overall weight: 30,750 kg, Clamping force: 3500 kN Platen size (h x v): 1050 x 980 mm Cgsdoyv Embepfx Abwjr Minimum mould height: 350 mm Maximum platen distance: 1300 mm Opening stroke: 950 mm Screw diameter: 70 mm Shot volume: 1039 ccm Injection pressure: 1441 bar Equipment Screen text in German Hydraulic core pull 2x Machine including conveyor belt Machine including handling unit Machine including safety enclosure Machine without material hopper Leveling elements Handling Data Manufacturer: ENGEL Control: ER-HLI 81 Year of manufacture: 2004 Machine dimensions (LxWxH): 7.98m x 2.22m x 2.57m Total weight: 30750KG

Condition: ready for operation (used), Year of construction: 2010, operating hours: 54,872 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 55 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, total length: 6,500 mm, total width: 2,200 mm, total height: 2,300 mm, overall weight: 15,000 kg, clamping force: 2500 kN Codjyv Elwspfx Abwogr distance between tie-bars h x v: 630 x 630 mm size of mould plates h x v: 995 x 1050 mm min. mould height: 330 mm max. open daylight: 1150 mm opening stroke: 820 mm screw diameter: 55 mm swept volume: 570 ccm injection pressure: 2387 bar measures of machine l x w x h: 6.5m x 2.2m x 2.3m total weight: 15000KG

Condition: excellent (used), Year of construction: 2019, operating hours: 8,250 h, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, total length: 4,110 mm, total width: 2,650 mm, total height: 4,810 mm, overall weight: 22,000 kg, clamping force: 2000 kN size of mould plates h x v: 1772 x 800 mm min. mould height: 400 mm max. open daylight: 900 mm opening stroke: 500 mm round table diameter: 2000 mm screw diameter: 50 mm swept volume: 392 ccm injection pressure: 2000 bar equipment included rotary table screen text german screen text english CEE-socket 16A core pulling hydraulically 4x air valve 1x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface robot EUROMAP 67 interface EUROMAP 73 Codpfx Aeyv D T Tobwegr interface OPC measures of machine l x w x h: 4.11m x 2.65m x 4.81m total weight: 22000KG

Condition: excellent (used), Year of construction: 2018, operating hours: 9,585 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 55 mm, clearance between the columns: 520 mm, displacement volume: 523 cm³, injection pressure: 1,904 bar, total length: 6,700 mm, total width: 1,600 mm, total height: 2,300 mm, overall weight: 10,900 kg, clamping force: 1600 kN distance between tie-bars h x v: 520 x 470 mm size of mould plates h x v: 710 x 660 mm min. mould height: 200 mm max. mould height: 600 mm opening stroke: 1050 mm screw diameter: 55 mm swept volume: 523 ccm injection pressure: 1904 bar equipment included screen text german CEE-socket 16A Cgsdeyv D Hgepfx Abwjr CEE-socket 32A pressure accumulator for uprated injection speed 3 freely programmable each inputs and outputs core pulling pneum. 2 x machine incl. water flow regulator machine without material hopper Anti vibration mounts interface for dosing unit interface for temperature control units interface USB Schuko-socket 10A wear-resistant injection unit mould heating 24x measures of machine l x w x h: 6.7m x 1.6m x 2.3m total weight: 10900KG

Condition: used, Year of construction: 2008, operating hours: 10,113 h, clamping force: 1,200 kN, screw diameter: 35 mm, clearance between the columns: 470 mm, displacement volume: 156 cm³, injection pressure: 2,429 bar, total length: 6,000 mm, total width: 1,700 mm, total height: 2,190 mm, clamping force: 1200 kN distance between tie-bars h x v: 470 x 470 mm size of mould plates h x v: 780 x 735 mm min. mould height: 200 mm max. mould height: 450 mm max. open daylight: 850 mm opening stroke: 400 mm Cgsdpfsyv Dvbex Abwsr screw diameter: 35 mm swept volume: 156 ccm injection pressure: 2429 bar equipment included screen text german screen text english CEE-socket 16A core pulling hydraulically 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts electric interface for handling units according to Euromap 12 Schuko-socket 10A measures of machine l x w x h: 6m x 1.7m x 2.19m total weight: 9700KG

Condition: good (used), Year of construction: 2011, Ref. no.: 18586 Hersteller: KRAUSS MAFFEI Type: KM180-750 AX Electric machines Year of construction: 2011 Clamping unit Clamping force: 180 ton Opening stroke: 1050 mm Distance between tie bars: 560 × 510 mm Mould height min.: 200 mm Mould height max.: 600 mm Platen size (h x v): 790 × 740 mm Injection unit Screw diameter: 50 mm Injection volume: 393 cm³ Shot weight: 357 g Injection pressure: 1892 bar Measurements and weight Dimensions: 6,07 x 1,92 x 2,01 m Machine weight: 6500 kg Cgedpfxsw E E Evj Abwor

Condition: used, Motan NS-D05-SR-2, granulate loader and dryer, Motan granulate feeder, used machine Manufacturer: Motan Type: NS-D05-ST-2 Overall dimensions: 750 x 750 x 2500 mm Year: 1990 Tank volume : ~280 liters Cjdpfx Aoxlpv Nsbwogr Electrical data: 240 V; 2.4 kW; 10 A - with granulate suction unit - with electric heating

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, warehouse no.: 503569 manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included: screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor machine without hopper loader Anti vibration mounts technical data robot-system handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 year of construction: 2012 handling weight: 10 kg Cgjdjyvz Izspfx Abwjr operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 2,400 bar, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 260 mm, total length: 3,800 mm, total width: 1,550 mm, total height: 2,150 mm, warehouse no.: 503653 manufacturer: ENGEL type: e-max 200-50 controller: year of construction: 2011 clamping force: 500 kN distance between tie-bars h x v: 370 x 320 mm size of mould plates h x v: 520 x 470 mm Cgedpfx Abeyvz Hkewsr min. mould height: 150 mm max. mould height: 350 mm max. open daylight: 610 mm opening stroke: 260 mm screw diameter: 25 mm swept volume: 59 ccm injection pressure: 2400 bar equipment included screen text german CEE-socket 16A air valve 1x machine without material hopper machine without hopper loader Anti vibration mounts interface robot EUROMAP 67 Schuko-socket 10A measures of machine l x w x h: 3.7m x 1.32m x 1.8m total weight: 3400KG