▷ Used Processing- and subsequent machines for sale 💲 trade machines on Werktuigen USA

Listing

Rösrath / Köln

(dealership location)

7,700 km

Other machinery and equipment

EISELT KONTUREX Standard

Call

Condition: used, Year of construction: 2003, horizontal contour cutting machine, second-hand manufacturer: Günter Eiselt Model: KONTUREX Standard year of construction: 2003 7vwf7sxwie cutting width: 1250 mm cutting length: 3000 mm Cutting height: 1300 mm Wire length: 7400 mm Table size 3000 x 1250 mm horizontal contour cutting machine, including vacuum table and suction unit; torsion-resistant steel frame construction, mobile table unit. All data without guarantee (excerpt from catalogue text) Please, contact us for getting more information and pictures on mail(at) or

more

Listing

Rosmalen

7,545 km

CNC-Processing Centre

BIESSE MATERIA LD 4020 (5-Axis)

Call

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: EXG0204DL, BIESSE MATERIA LD 4020 (5-Axis) CNC-Machine Description (brief) • Materia LD 4020 (SI) • Symmetrical drive on X-axis • Axes strokes: X4000/Y2000/Z1200 mm • X-Y-Z axes drive by means of brushless gearmotors. Rapid feed rates: X85/Y60/Z60 m/min Cr8k8konl0 • Automatic axes lubrication • Guide covering bellows for Z-axis • Air-conditioned electrical enclosure • Siemens SINUMERIK 840D sl NC. • Suspended arm operator panel with keyboard, monitor • Technical documentation in EC language Full discription on request (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

more

Listing

Barneveld

7,531 km

Hosokawa Mikropul MZM 1-40 gravity classifiers - W

Hosokawa Mikropul MZM 1-40 gravity classifiers - Wind sifter

Call

Condition: used, SKU : 343T946 Location : Barneveld Make : Hosokawa Alpine Type : Multiplex MZM 1-40 No. : P1126067 Year of construction : 2003 Main Features Material : Stainless steel Inlet diameter : 33 mm Specified Features - Wind sifter Air separator : check Material : Stainless steel 1.4401 (316) Cfk7qcnqs7 CE : check Extra Specifications : Windsifter outlets (2x) dia. 38mm. With vibro feeder: Make: Sortec Motor : 230V 50/60hz 8A Dimensions: 1,0x0,9 M, Height 2,05 M Weight 250 kg Applications: Pharma Oleiferous seeds: classifying systems for separating cracked soy beans or sunflower seeds Precious metals: the separation of copper, aluminium or lead from the insulation material of previously cut cable scrap, Dust removal from plastic granules, coke, chalk, fertilisers, bauxite, etc. Ideal for sharp separations in the range d97 = approx. 0.3 - 10 mm. What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

more

Listing

Köln

7,690 km

Edge polishing machine

Wolf MAC 3.1

€4,500

ONO plus VAT

Call

Condition: good (used), Year of construction: 1989, Edge polishing machine WOLF MAC 3.1, used and functional. Bb2v8br2ihr Can be inspected and tested on site by appointment.

more

Listing

Lindau

8,008 km

5-AXIS PORTAL MILLING MACHINE

HG GRIMME SysTech GmbH P-S-F (25-10)

Call

Condition: excellent (used), Year of construction: 2007, Data: Machining range in 5-axis operation: P-S-F (25-10) Ekuj292f X/Y travel, mm: 3,000 x 1,500 Z travel, mm: 950 Rotary axes C/A: 540°/360° Rapid traverse linear axes X/Y: 60 m/min (110 m/min opt. linear drive) Rapid traverse linear axes X/Y - optional: 30 m/min Rapid traverse linear axis Z: 30 m/min Rapid traverse rotary axes A/C: 12,000°/min Positioning accuracy: ± 0.03 mm with glass scale (Heidenhain) Repeat accuracy: ± 0.03 mm with glass scale (Heidenhain) High-frequency milling spindle: 11 kW continuous operation (S1) Nominal speed: 30,000 rpm Tool holder: HSK 40 E CNC control: digital servo drives/multiturn system Tool change magazine: dust-tight 24 magazine slots Electrical drive: digital servo drives/multiturn system Mechanical drive: ball screw spindle Machine weight: approx. 4,000 to approx. 6,500 kg Max. Max. load: approx. 300 kg Construction: rigid, vibration-absorpt. construction Central lubrication: automatic Vacuum pump: 60 m³/h Reference run not recorded as dgt. Multiturn drives Control: NUMpass HMI

more

Buy-it-Now

Styrofoam milling machine

BORNEMANN BW4030

€21,240

Fixed price plus VAT

Condition: good (used), Year of construction: 1998, Fully functional condition + regular maintenance by machine manufacturer TECHNICAL DETAILS X-axis: approx. 5.000 mm Y-axis: approx. 2.700 mm Z-axis: approx. 1.250 mm control: Fidia C20 with handwheel Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast iron) table load: max. 15.000 kg T-slots and distance: 10 x 22H8 / 255 mm milling spindle power: 8 kW spindle speed: 6.000 rpm tool holder: 78/8 flange tool clamping: manual with union nut feed speed: max. 20 m/min axis acceleration: max. 1,5 m/qs Bfutnas0dlu MACHINE DETAILS Connected load: approx. 28 KW back-up fuse: 63 A space requirement: approx. 8.000 x 5.000 x 4.500 mm total weight: 25.000 kg

more

Listing

Schloß Holte-Stukenbrock

7,720 km

Piston melter

Düspohl UniMelt 40

€19,000

ONO plus VAT

Call

Condition: refurbished (used), On offer is a piston melter for EVA and PUR adhesives. The melter has been professionally overhauled, thus fully functional. UniMelt 40 with control cabinet and adhesive dosing control (Düspohl) For melting EVA, APAO and PUR hotmelt adhesives. For commercial block sizes from 2 - 20 kg or in granulate form. The adhesive to be melted is fed into the magazine shaft of the piston melter from above. from above. A grate underneath is electrically heated for the melting process. electrically heated for the melting process. To avoid prolonged temperature effects of the heating grate on the adhesive the adhesive, the already liquefied adhesive is pressed by a piston into the reservoir below. Dlmzht into the reservoir below. A level monitor controls this process process as required. To prevent chemical reactions of reactive adhesives with atmospheric moisture, the entire pre-melting system is internally pre-melting system is permanently dried internally by an air dryer. air (pressure dew point -70°C). A gear pump with a constant the adhesive is then conveyed to the downstream adhesive application unit. unit.

more

Listing

ADN Materials Ltd 250-300kgs per hour each

Kingscourt Rd, Co. Monaghan, Ireland

6,708 km

Washing Lines x 2

ADN Materials Ltd 250-300kgs per hour each

€90,000

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2020, 2 x Washing lines for plastic for sale. Currently in production and can be seen in operation. Ready for shipping May 2022. Washing line No1 - year of manufacture 2020 B8cenfahp7 Sink float Tanks x 2 De watering Augers x 4 Friction Washer x 1 Centrifusal Dryer / Cleaner x 1 Electrical Cabinets Airdryer and associated piping. Capacity 250-300kgs per hour. Washing Line No 2 - Year of manufacture 2012 Wet Crusher 500 Kgs per hour Sink float Tanks x 2 De watering Augers x 4 Friction Washer x 1 Centrifusal Dryer / Cleaner x 1 Electrical Cabinets Airdryer and associated piping. Capacity 250-300kgs per hour. Total Price for both plants is €110,000. More pictures & videos available if interested.

more

Listing

BDPLAST Siebwechsler hydraulisch BDPlast 250

Altdorf bei Nürnberg

8,037 km

Screen changer hydraulic BDPlast

BDPLAST Siebwechsler hydraulisch BDPlast 250

€33,000

ONO plus VAT

Call

Condition: like new (used), Year of construction: 2013, Brand: BDPLAST 2013 Year of construction. Suitable for extruders with 90 to 150 screw diameter. Universal use as good as new only approx. 500 operating hours. execution: plate screen changer Screen diameter 250 mm filter area 491 cm² Sealing ring PTFE / Teflon Jxygne Heat output approx. 22 kW Number of control zones 4 Operating temperature max. 260°C Operating pressure max. 400 to 500 bar Hydraulic unit designed for quick change (accumulator preloaded with nitrogen) Capacity from 800 to 2000 kg/h Weight 950 kg

more

Listing

Breda

7,520 km

Belling machine

SICA S.p.a BS-R-32-200

Call

Condition: excellent (used), Year of construction: 2008, Manual belling machine from the renowned brand SICA S.p.a. including belling tools. The machine has few production hours and is equipped with a booster for extra pressing force. Year of manufacturing: 2008 Tools: 130 x 2,5 + 150 x 3,0 Available for viewing in Breda, NL. Ou3zz

more

Listing

Freudenberg

7,738 km

Upgrade for Foam Cutting Machines

sitola cut technologies

Call

Condition: new, Is your cutting machine out of support? Bzzgt0x3 Many older cutting machines eventually reach the end of their support. This can be caused by the failure of electronic components such as motors or controllers. But also the manufacturers of the machines themselves often stop providing support after a while. What is the solution? In this case you should consider having your old cutting machine modernized by sitola. What are your benefits? You will receive a completely new machine control with the latest generation of servo technology. This gives your cutting machine a new life and saves you investing in a new system for years to come. What machines are covered? With 20 years of experience in modernizing foam cutting machines, our service includes both manual and fully automatic vertical cutting machines, splitting machines and also CNC contour cutting machines. This includes most of the machine producers such as Albrecht Bäumer or Fecken-Kirfel. Due to favorable exchange rates, we can currently keep our prices stable. So now is the perfect time to start thinking about upgrading.

more

Auction

Styrofoam milling machine

BORNEMANN BW4030

Condition: good (used), Year of construction: 1998, Functionality: fully functional, Fully functional condition + regular maintenance by machine manufacturer TECHNICAL DETAILS X-axis: approx. 5.000 mm Y-axis: approx. 2.700 mm Z-axis: approx. 1.250 mm control: Fidia C20 with handwheel Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast iron) table load: max. 15.000 kg T-slots and distance: 10 x 22H8 / 255 mm milling spindle power: 8 kW spindle speed: 6.000 rpm tool holder: 78/8 flange tool clamping: manual with union nut Ilcktnh7rr feed speed: max. 20 m/min axis acceleration: max. 1,5 m/qs MACHINE DETAILS Connected load: approx. 28 KW back-up fuse: 63 A space requirement: approx. 8.000 x 5.000 x 4.500 mm total weight: 25.000 kg

more

Listing

Jonschwil

8,031 km

CNC Lathe

BENZIGER TNE-V1

Call

Condition: excellent (used), Year of construction: 2006, Capacity over bed Ø 400 mm, travel X/Y/Z 170/50/505 mm, tools Q-axis 360°, 2 + 1 tools, spindle 7 KW, 10 – 4000 rpm, bore Ø 42 mm, control SIEMENS 840D, chip cylinder vacuum cleaner, minimum lubrication system, pneumatic hollow fixing device, 2-jaws and 3-jaws chuck Ø 160 mm, manuals, etc Udehdtv9

more

Listing

Waalwijk

7,525 km

Sidel Stretch Blow Moulding Machine

SIDEL Stretch Blow Moulding Machine

Call

Condition: like new (used), machine/vehicle number: 13.0.201, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams Lp8berc 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

more

Listing

Duisburg

7,642 km

thermoforming machine

Gabler D600

€5,000

Fixed price plus VAT

Call

Condition: ready for operation (used), Year of construction: 1998, machine/vehicle number: 4093, Serial no. 4093, Year 1998 with pay-off and take-up reel, I3wflt9wu Control Siemens Coros OP25, personal protection walls, tool stands, Stainless steel table with shelf and stainless steel platform, approx. 2x1 m Machine is already dismantled with stand in Marl Material: Apet, PS and PP film Shape: 95-101-115 cm Foil width: 6.10 Layer thickness: 0.25 to 0.28

more

Listing

Breda

7,520 km

Complete tube belling line

Thyssen Nothelfer KM-D 400 A

Call

Condition: ready for operation (used), Year of construction: 1996, This belling machine from Thyssen Nothelfer is a very complete line. The line is disassembled and has a throughput of up to 10m pipe length. See attached PDF for all accessoires. – Brand: Thyssen Nothelfer – Year built: 1996 Vkq2ietf – Max. tube Ø: 500mm

more

Listing

Freudenberg

7,738 km

horizontal CNC contour cutting machine

sitola SCC-W

Call

Condition: new, Year of construction: 2021, Key facts The horizontal contour cutting machine with rotating cutting wire is used for cutting shapes and contours of harder materials such as PU flexible foam, PU rigid foam, PU rebonded foam, extruded PS, phenolic resins, calcium silicates, mineral wool and foamglas. Producer of machine sitola | cut technologies Caracteristics of the machine Cutting height: 1,300 mm Cutting length: 2,200 mm (extension optional) Cutting width: 2,200 mm (extension optional) Cutting speed: 10m/min (depends on material and contour) Positioning speed: 25m/min Wire speed: continuous adjustable Vacuum unit: fixes the material on the table. The vacuum unit is externally installed for easy maintenance. Dust exhausting unit: the dust created by the cutting process is absorbed by the dust exhausting unit. Wire cooling device: this significantly rises the liftime of the cutting wires. Cutting tool cutting wire Power supply Power supply: 400 VAC with 50 / 60 cycles An optional transformer may become necessary. Bt0jb8yi3z Warranty There is a warranty of 1 year for the machine. Safety advise machine The contour cutting machine is manufactured according CE (European Standard). The operator of the cutting machine is responsible for any required and additional safety installations or certificates according to local regulations. Miscellaneous machine The manual for the control is in German / English. Other languages are available upon request. sitola control for CNC contour cutting machines included We use state-of-the-art automation components. The control is installed in a Rittal switch cabinet. The user interface is a 13,3" touch screen monitor with a fast SSD hard drive. All servo inverters of the control are new. Producer of control unit sitola | cut technologies User interface The user-interface has been designed for a fast familiarisation time and is friendly to use. Multivendor capability The conversion has multivendor-capability and can be implemented for all cutting machines from various manufacturers. Cutting programs The sitola CNC-control reads machine code of various providers. That means you can continue using your CAD programming software. Cutting programs G-CODE and SLD - programs can be used. The control also has an integrated dxf-converter that allows a fast creation a your cutting programs. Network connection The control can be integrated to your corporate network by LAN or WIFI connection. Remote access An optionally integrated modem enables remote diagnoses and software updates worldwide. UPS The control has an intelligent uninterrupted power supply unit integrated. In case of a sudden power loss the machine will be able to shut down safely. Cooling system The control cabinet has an integrated cooling system. This reduces the pollution of dust in the control and results in a longer lifetime of the electrical components. Availability Short delivery times upon agreement.

more

Auction

Styrofoam - copy router

BORNEMANN BW 900

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, COPY MILLING MACHINE for processing styrofoam machining height: 1400 mm table size: 2000 x 1300 mm Sw0sr motor power: 75 kW machining depth: max. 1040 mm

more

Listing

Tatabánya

8,570 km

#3990 ROLL REEL DISPENSER, SLICER

SM Engineering AG KBM

€2,750

Fixed price plus VAT

Call

Condition: used, Year of construction: 1998, Manufacturer: SM Engineering AG Type: KBM Construction year: 1998 Work width 495 mm B9dnv8ndsm Overall size: 1600 x 2000 x 1800 mm Electrical data: 3x400 v; 50 Hz Operating pressure: 6 bar The machine is suitable for cutting off different foils and other materials.

more

Listing

Düren

7,664 km

Blow-through rotary valve

Lenz

€200

Fixed price plus VAT

Call

Condition: good (used), Year of construction: 1999, For sale is a ready to use blow - through rotary valve in good condition (used). A visit and demonstration is possible. Bfbj3a2u2r More photos and information on request.

more

Listing

Neustadt an der Weinstraße

7,854 km

Reversible bridge punch

Schön und Sandt 6020

Call

Condition: refurbished (used), Year of construction: 2023, Make: Schön and Sandt type: 6020 Punching area: 1600x800mm Punching force: 100 tons Muvooy8z Incl. documentation More details on request

more

Listing

Deutschland

7,870 km

CNC-Bearbeitungszentrum

CMS ARES 3618

Call

Condition: new, Year of construction: 2022, 5-axis CNC machining center for machining carbon and fiberglass workpieces, plastics, ureol, wood. Available: December 2022 Machine details: CMS ARES 3618 - Axis travels: X-axis: 3,600 mm Y-axis: 1.800 mm Z-axis: 1.200 mm B-axis: +/- 120 ° C-axis: +/- 270 ° - Universal tool head (12 kW | max. speed: 24,000 rpm) - Tool magazine: in X-direction moving row magazine with 8 stations - tool holder: HSK 63F - CNC control: Fanuc 31 IB5 - Vacuum system: 2 x 100 m³/h - Working area cover, pendulum operation, tool measuring system, dust protection, ... Additional services: Installation, commissioning, training possible! Jcgvmzv Picture similar!

more

Listing

Freudenberg

7,738 km

automatic vertical foam cutting machine

sitola SVC-A

Call

Condition: new, Year of construction: 2021, The automatic vertical cutting machine type sitola SVC is used to cut sheets or trim blocks of PU and PE foams, rebonded foams and similar materials in the industries of furniture, mattresses and packing. Producer of machine sitola | cut technologies Caracteristics of the machine Table left of the blade: 1.250 mm (extension optional) Table right of the blade:1.250 mm (extension optional) Cutting length: 2.300 mm (extension optional) Cutting height: 1.300 mm (extension optional) Height of right side stop: 500 mm (extension optional) Cutting speed: 4-45 m/min Pneumatic tensioning of the band knife with additional pressure switching for a temporary increase in the knife tension. Use of precision linear guides for moving the cutting unit and the side fence. The high-quality anodized aluminum sheets of the work table enable low-friction movement of the material to be cut. Cutting tool 8 x 0,45 mm 10 x 0,45 mm 15 x 0,45 mm Power supply The power supply is 400 VAC with 50 / 60 cycles. This may be adapted as per your specification. An optional transformer may become necessary. Bt0i3tdduh Warranty There is a warranty of 1 year for the machine. Safety advise machine The machine is manufactured according CE (European Standard). Delivery of the machine includes a safety fence. Miscellaneous The manual for the machine and control is in German / English. Other languages are available upon request. new sitola control for vertical foam cutting machines included We use state-of-the-art servo technology with a Siemens PLC control S7-1500, an operation via a 12 "TFT Siemens touch control panel (KTP1200) mounted in a Rittal console. The Siemens servo motors and gears used can be separated to ensure a cheap spare parts supply. Producer of control unit sitola | cut technologies User interface The user interface was designed for a quick familiarization period and is very user-friendly for entering cutting programs with cutting thickness and number. Using teach-in mode as a path control, cutting paths and cutting times are reduced. Remote access An integrated modem enables remote diagnoses and software updates worldwide. Availability Short delivery times upon agreement.

more

Listing

Magdeburg

7,873 km

Dosing system

Dekumed Unidos 300 TXMP

€30,000

ONO plus VAT

Call

Condition: good (used), Year of construction: 2016, Dekumed Unidos 300 TXMP 2K-Dosiermischanlage, control Siemens Simatic PLC S7, year 2016 High-pressure gear pumps for epoxy resin and hardener, 2 stainless steel tank 400 L for epoxy resin adhesive and hardener, heaters for both component container, Dosiermischkopf, compressor, cable reel 70 m, control cabinet, boom 4 m swivel, with system built on Steel frame, heavy duty casters, drawbar C7wihe0 Dekumed Unidos 300 TXMP tr. supply for mixing plant, built in 2016 Pumps for epoxy resin and hardener, pressure sequence plate Assembly for 200 L containers, Control Panel, system built on steel frames with heavy duty casters Conditioning is model year 2016 and was put into operation in 2017, and ran only 6 months. System is dismantled. New price of system €235000

more

Listing

Tatabánya

8,570 km

Granulate receiver, plus tank #5250

PIOVAN Easy 3 System C2

€1,420

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2015, Easy 3 system granulate vacuum receiver C2, with tank Uopx088d Tank diameter 650 mm Tank height: 800 mm Weight: 70 kg

more

Listing

Oberstreu

7,910 km

2-Band Haul-off

Ankele BAP 350-70-1A

Call

Condition: ready for operation (used), Year of construction: 2018, 2 pieces 2-Band Haul-off for pipes up to 70 mm Manufacturer: Ankele B8ybquuquo Type: BAP 350-70-1A Year: 2018 Max. mechanical speed: 40 m/min.

more

Listing

Neustadt an der Weinstraße

7,854 km

Reversible bridge punch

Schön und Sandt 530

Call

Condition: refurbished (used), Year of construction: 2023, Make: Schön and Sandt type: 530 Punching area: 1200x650mm Punching force: 63 tons Incl. documentation D7qm7gw More details on request

more

Listing

Berlin

(dealership location)

7,943 km

Crosscut Saw

Mutz Maschinenbau GmbH

Call

Condition: ready for operation (used), Suitable for rigid foam, sawing width: 1250mm, max. sawing height: 200mm, max. speed: 12m/min, with controls cabinet or saw blade. S3qgd

more

Listing

Tatabánya

8,570 km

Granulate tank #5249

PIOVAN

€2,370

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2015, Piovan granulate tank, + inverter+ PLC Ei7u79zym With safety top door. Tank diameter 650 mm Tank height: 800 mm Overall size: 650x800x1300 mm

more

Listing

Oberstreu

7,910 km

Cooling spray bath 6 m

KUAG SB 110/6

Call

Condition: ready for operation (used), Year of construction: 2011, Cooling spray bath 6 m suitable for pipes up to 110 mm OD Manufacturer: KUAG B8niurpbdh Type: SB 110/6 Year: 2001 Condition: as it is, ready for operation

more

Listing

Neustadt an der Weinstraße

7,854 km

Reversible bridge punch

Sandt 6005

Call

Condition: refurbished (used), Year of construction: 2023, Make: Schön and Sandt type: 6005 Punching area: 1600x600mm Punching force: 40 tons Incl. documentation Bawkbckd9ot More details on request

more

Listing

Berlin

(dealership location)

7,943 km

Automatic Bending Machine

Codema EXPO 2000 Q+F

Call

Condition: ready for operation (used), Year of construction: 2011, Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. Cwv9hnqdnm

more

Listing

Oberstreu

7,910 km

Automatic double wheel coiler

NEXTROM / Maillefer MWB 1300G

Call

Condition: ready for operation (used), Year of construction: 1998, Automatic Double wheel coiler B8nhrvvo2s suitable for pipes from 10-32 mm OD Manufacturer: NEXTROM /Maillefer Type: MWB 1300G Year: 1998 Condition: as it is, ready for operation.

more

Listing

Neustadt an der Weinstraße

7,854 km

Swivel arm punch F45 NEW

HN Maschinenhandel F45

Call

Condition: new, Year of construction: 2021, Swivel arm punch F45 Swivel Arm Punch NEW Type: F45 Punching force: 20 tons Swivel arm width:370mm Punching area:900x430mm Year of manufacture: new 2021 Bjgvl9xy Beautiful & Sandt

more

Listing

INDUSTRIAL CONTROL AUTOMATION ICA-FM-3922

Berlin

(dealership location)

7,943 km

CNC Milling Machine

INDUSTRIAL CONTROL AUTOMATION ICA-FM-3922

Call

Condition: ready for operation (used), X-travel: 3700mm, y-travel: 2200mm, z-travel: 200mm, table dimensions: 4000x2300mm, connected load: 23kW, length: 5000mm, width: 3300mm, height: 2350mm, weight: 1,2t. Oxdc2