Used other metal presses for sale (153)

Year of construction: 1985, condition: used, Max. pressing force: 150t, bending length: 4050mm, backgauge: 750mm, control: Cybelec CNC 7200 P, weight: approx. 15t. Equipped with hydraulic tool clamping, crowning system, height-programmable backgauge, two control panels and two pneumatic bending aids. Including stand with various upper tools and dies as well as various special accessories manufactured in-house. Documentation available. An on-site inspection is possible. Iodezx Ehbjpfx Apijtn

Year of construction: 2005, condition: ready for operation (used), overall weight: 9,500 kg, total width: 1,700 mm, total height: 2,300 mm, pressing force: 102 t, product length (max.): 3,800 mm, number of axes: 8, CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine. • Ram stroke: 300 mm • Tool clamping: Promotec pneumatic system • Hydraulic crowning: Dynamic hydraulic crowning of the lower table • Axes: Y1, Y2, X, R, Z1, Z2, X1, X2 (8 axes) • Oil seals: Replaced • Oil: New • Warranty: Included Iodpfjzypi Eox Apijtn • Condition: Machine guaranteed / ready for sale Technical Specification Bending Length 3100 mm

Year of construction: 2018, operating hours: 2,154 h, condition: ready for operation (used), overall weight: 11,000 kg, total width: 1,850 mm, total height: 2,890 mm, pressing force: 204 t, product length (max.): 3,580 mm, stroke length: 260 mm, Hydraulic press manufactured in 2018. This Baykal APHS 31200 features a press force of 200 t and a bending length of 3,100 mm. With a maximum stroke of approximately 260 mm, it is designed for efficient bending operations. If you are looking to get high-quality bending capabilities, consider the Baykal APHS 31200 hydraulic press we have for sale. Contact us for further details. • Hydraulic pressure: approx. 276 bar • Nominal power: approx. 15.3 kW • Power supply: 400 V / 50 Hz / 3 Ph Itjdsz Hl Iuepfx Apien • Production hours: 2,154 h Additional equipment • Included tooling: • V16 H80 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×2 mm • V50 H60 mm: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • V12 H80 mm: 10 ×2 / 15 / 20 / 195 / 285 / 295 / 835 ×3 mm • V80 H80 mm: 835 ×3 mm • V16 / V22 / V32 / V50: 10 / 15 / 20 / 40 / 50 / 100 / 200 / 370 / 835 ×3 mm • Additional tooling information: • ID 1177 – Standard – 85° – Height 65.50 mm – Radius 3.00 mm • ID 1271 – Standard – 60° – Height 115.00 mm – Radius 0.80 mm • ID 1284 – Standard – 60° – Height 135.00 mm – Radius 0.80 mm • TS-10.516 – Standard – 60° – Height 85.00 mm – Radius 0.80 mm Technical Specification Bending Length 3100 mm

Condition: used, There are three May MKN1-100/6 toggle-type presses available, ram stroke: 60mm, pressing force: 100t, ram strokes: 60/min, flywheel speed: 620rpm, distance between bolster plate and ram, stroke at bottom/adjustment at top: 265mm, ram adjustment: 30mm, table surface: 640x404mm, ram surface diameter: 300mm, drive power: 5.5kW, operating voltage: 3~/380V, frequency: 50Hz, control voltage: 220V, lighting voltage: 220V, rated current: 17A, supply fuse: 25A, overhaul: 1984, an on-site inspection is possible. Itedpfez D Hzdjx Apijn

Year of construction: 1984, condition: ready for operation (used), Press force: 200t, working length: 3550mm, distance between columns: 3050mm, length: 4000mm, width: 2000mm, height: 3000mm, weight: 16t. The machine is fully functional and in good technical condition. Upper tools are included. The lower tool, consisting of the die block or prism, is missing. An on-site inspection is possible. Itsdpfx Apozrn H Hjijn

Condition: used, Year of construction: 1998, Press force: 3500 t Stroke: 900 mm Frame width: 3200 mm Side frame opening: 2200 mm Shut height (stroke up): 1700 mm Table area: 3150 x 2150 mm Table height above floor: 500 mm Ram area: 3150 x 2400 mm Downstroke speed: 400 mm/s Upstroke speed: 210 mm/s Isdszypa Repfx Apiotn

Condition: used, Year of construction: 1999, 5-STATION HYDRAULIC PRESS, FISCHER PRESSURE: 5 x 80 tons TABLE DIMENSIONS: 800 x 560 mm STROKE LENGTH: 500 mm Itedpfxjz A Aw Eo Apien

Year of construction: 1986, condition: used, COFMO Press KD2330 Manufacturer COFMO Type Eccentric Mechanical Press Industrial Applications Stamping, punching, cold forming, and sheet metal processing in production workshops. Main Technical Specifications: - Nominal Force: 101.97 tons (1,000,000 N) - Model: KD2330 - Year: 1986 - Strokes per minute: 95 - Slide Adjustment: 100 mm - Working Voltage: 220 – 380 V - Air Pressure Requirement: 5 atm - Weight: 8,000 kg 🧩 Machine Usage The COFMO KD2330 102-ton press is designed for intensive sheet metal operations such as stamping and forming. It is ideal for high-speed, high-force applications in industries like metalworking, automotive parts manufacturing, and tooling. Ijdpfoxlcxkox Apistn ⚙️ Features / Differentiators With its 95 strokes per minute and nearly 102 tons of force, this machine combines speed and power. The dual-voltage compatibility (220/380V) and pneumatic system make it highly adaptable for various industrial setups. Strength: 101.97T Strokes/min: 95 Weight: 8000Kg

Year of construction: 1969, condition: ready for operation (used), A complete 8-stage transfer press line with a Weingarten double-column transfer press is available. 1) Mechanical double-column transfer press Weingarten S.3100.08.70.1, year of manufacture: 1969, tool stations: 9, forming stages: 8, total press force: 3100t, press force blanking slide/drawing slide: 300t/2800t, strokes: 28/min, blanking slide stroke: 200mm, drawing slide stroke: 500mm, max. drawing depth: 120mm, drawing slide ejector stroke: 100mm, blank holder stroke: 50mm, drawing cushion force: 25t, transfer pitch: 700mm, max. blank dimensions X/Y: 450mm/450mm, max. blank diameter: 540mm, table dimensions X/Y: 1200mm/5600mm, main motor power: 300kW, machine dimensions X/Y/Z: approx. 10500mm/7500mm/9700mm, weight (according to documentation): approx. 524t, stroke counter reading (September 2024): approx. 25 million. 2) Blanking and cutting press Georg Maschinentechnik PKD 630, year of manufacture: 2004, max. press force: 6300kN, slide stroke: 240mm, strokes: 40/min, max. slide adjustment: 100mm, max. shut height: 525mm, table dimensions X/Y: 1200mm/1500mm, slide dimensions X/Y: 1050mm/1100mm, main motor power: 110kW, weight: approx. 110t. 3) Decoiler Roland Dreher 2398 G-SP, year of manufacture: 2004, max. load capacity: 25500kg, max. strip width: 1050mm, coil inner diameter range: 475mm-615mm, max. coil outer diameter: 2000mm. 4) Straightening feeder Roland Dreher 1689 G-SP, year of manufacture: 2004, strip width range: 100mm-1050mm, max. strip thickness: 12.4mm, max. strip cross-section: 6000mm², straightening rolls: 6, straightening roll diameter: 100mm, infeed and outfeed rolls: 4, diameter: 140mm, max. feed speed: 50m/min, feed accuracy: 0.1mm, transverse travel: +/-400mm. 5) Transfer feeder Roland Dreher 700/160/50, year of manufacture: 1994, feed length: 700mm, closing stroke: 160mm, lifting stroke range: 0mm-50mm, max. rail spacing: 1190mm, strokes: 24/min. 6) Central component oiling and processing system Leblein, control system: Siemens S7-300. 7) Line control system and electrical cabinet Siemens S7-317 with two decentralized Siemens ET200M units, modernization year: 2011. Including additional peripheral equipment such as feeding, marking, hydraulics, conveying, etc. Documentation available. An on-site inspection is possible. Itedpfxszl U H Tj Apisn

Year of construction: 1995, condition: ready for operation (used), overall weight: 52,000 kg, total width: 5,100 mm, total height: 5,170 mm, pressing force: 204 t, product length (max.): 1,750 mm, table length: 800 mm, table width: 3,800 mm, Hydraulic press manufactured in 1995. This EXNER EX SBR 200 features a pressing force of 2000 kN and a drive power of 78 kW. With an oil capacity of 1400 liters and a weight of 52000 kg, this machine is designed for robust performance. If you are looking to get high-quality pressing capabilities, consider the EXNER EX SBR 200 hydraulic press we have for sale. Contact us for further details. - Pressing Force: 2000 kN- Drive Power: 78 kW- Overtravel Distance: 56 mm- Safety Distance: 235 mm- Overtravel Time: 147 ms- Max. Ram Stroke: 700 mm- Distance Between Columns: 3830 mm- Installation Height: 1200 mm- Ram Diameter: 240 mm- Number of Ram Cylinders: 2- Table Bed Depth: 800 mm- Table Bed Width: 3800 mm- Clamping Plate Thickness: 150 mm- T-Slots Configuration: 8 slots, 28 mm slot width, 650 mm spacing- Total Connected Load: 90 kVA- Total Power Requirement: 77.48 kW- Voltage: 400 V- Frequency: 50 Hz- Main Motor 1 (VEM 250 M4): 55 kW, 1475 rpm- Motor 2 (VEM 132M4): 7.5 kW, 1435 rpm- Motor 3 (VEM 100Lx4): 3 kW, 1430 rpm- Motor 4 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 5 (VEM 132S4): 5.5 kW, 1440 rpm- Motor 6 (ZG1KMR63G4 VEM): 0.37 kW, 40 rpm- Oil Cooler Motor (Oiltec TB/33-6): 0.55 kW, 1000 rpm- Lubrication Pump Motor (Woerner GMA-B): 0.06 kW- Press Oil Tank Capacity: 1400 liters (ISO VG 46)- Hand Lubrication Pump Capacity: 1.5 liters (Shell Alvania EP2)- Motor Lubrication Pump Capacity: 2 liters Itjdpfjzxz Spex Apion

Condition: used, Year of construction: 1975, Press brake manufactured by FISCHER, model HAKS 10/3200. Pressing force approximately 100 tons. Year of manufacture 1975. Brief summary provided – a full technical translation will follow if required for this lot. Iedpfozymazsx Apijtn

Year of construction: 2005, condition: used, Working length: 3100mm, pressing force: 2500kN, max. stroke: 465mm, rapid down speed: 190mm/s, working speed: 10mm/s, rapid return speed: 150mm/s, machine weight: 18t. Machine control retrofitted to Cybelec approx. 5 years ago. Safety control completely renewed in July 2026, new Siemens components installed in the control cabinet. Inspection possible by arrangement. Ijdpfx Apozun T Seijtn

Year of construction: 2011, condition: ready for operation (used), 2 complete precision press systems are offered. Press force: 220kN, stroke: 100/12mm, operating pressure: 3/6bar, tool holder X/Y: approx. 350mm/300mm, safety distance: 355mm, overrun time: 0.07s, control system SCHMIDT PressControl 500: control type: PRC 500, incl. operating panel with display and keypad, two-hand control according to EN 574 Type III B. Accessories: machine frame with integrated safety device BGR 500 inspection, machine weight: 800kg, inspection possible by arrangement. Itjdpfx Apoy S A I Ujisn

Year of construction: 1971, condition: ready for operation (used), Max. stroke: 100mm, max. press force: 50t, max. oil pressure: 300kg/cm², motor power: 5.5hp, approx. 4kW, pump: Gury 6-16. An inspection on site is possible. Itedpfx Aezbb R Sspien

Year of construction: 1974, condition: ready for operation (used), Offered is a single-column eccentric press, manufacturer Schuler. Press force: 63t, throat depth: 250mm, max. stroke: 8mm-100mm, max. stroke rate: 160strokes/min, bed area X/Y: 710mm/500mm, slide area X/Y: 450mm/280mm, slide adjustment: 63mm, max. distance between bed and slide: 415mm, including a safety screen at the working area. Machine weight: approx. 3900kg. Inspection possible by arrangement. Iedpfxezrzp Is Apijtn

Year of construction: 1998, condition: ready for operation (used), 200 Ton press 230mm stroke Iodpfozp Dnzsx Apiotn Speed 25-35 SPM Die height 500mm slide adjustment 110mm Main motor 20HP Air pressure 5kg/cm2 Y.O.M 1998

Year of construction: 1998, condition: ready for operation (used), pressing force: 102 t, number of axes: 4, This 4-axis Warcom UNICA 100-40 hydraulic press was manufactured in 1998. It features a press force of 100 t and a bending length of 4,000 mm, making it suitable for various bending applications. The machine is equipped with a Promecam tooling system and ESA S530 CNC control. If you are looking to get high-quality bending capabilities, consider the Warcom UNICA 100-40 machine we have for sale. Contact us for further details. • Tool clamping/tooling system: Promecam • CNC control: ESA S530 • Condition: Overhauled/revised, ready for operation Additional equipment • Laser Safe safety system Ijdpfxezypubs Apietn Technical Specification Bending Length 4000 mm

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Iodpfxexq Exwj Apijtn

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Iedpfx Apozv T Iwsistn

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Itjdpfozrhhqjx Apion

Year of construction: 1980, condition: ready for operation (used), overall weight: 25,000 kg, pressing force: 408 t, stroke length: 1,490 mm, table length: 4,500 mm, table load: 60,000 kg, table width: 2,500 mm, Hydraulic press manufactured in 1980. This FRITZ MULLER ZAE 400-25.1.1 features a substantial press force of 400 t and a table size of 4,500 × 2,500 mm. The ram and additional clamping plate size is 4,500 × 2,500 mm, with a ram stroke of 1,490 mm, providing robust performance for various applications. The travelling table supports a maximum load of 60 t. If you are looking to get high-quality pressing capabilities, consider the FRITZ MULLER ZAE 400-25.1.1 machine we have for sale. Contact us for further details. Pressing Force • Ram Force: 4000 kN • Table Ejector Force: 200 kN • Ram Cushion Force: 2000 kN Stroke • Ram Stroke: 1490 mm • Table Ejector Stroke: 550 mm • Ram Cushion Stroke: 200 mm • Max. Stroke: 900 mm (UT) Working Area • Ram Cushion Surface: 4000 × 1500 mm • Max. Tool Installation Height: 2390 mm • Max. Travelling Table Load: 60 t Clamping Surfaces Itedpfxozvyzwj Apisn • Ram & Additional Clamping Plate: 4500 × 2500 mm • Travelling Table: 4500 × 2500 mm Additional Information • Oil Capacity: 3000 l HLP46 • Oil Cleanliness Class: 15/13/10 according to ISO 4406 • Travelling Table: Max. Load 60 t

Year of construction: 2023, condition: ready for operation (used), total width: 1,800 mm, total height: 2,700 mm, pressing force: 143 t, product length (max.): 4,000 mm, Hydraulic press manufactured in 2023. This GIZELIS G-FLEX 3140 features a pressing force of 140 tons and a working length of 3,100 mm. It includes a maximum bending thickness of 6 mm and a throat depth of 400 mm. If you are looking to get high-quality bending capabilities, consider the GIZELIS G-FLEX 3140 hydraulic press we have for sale. Contact us for further details. Ijdpfx Ajy E I Adjpijtn • Type: CNC hydraulic press brake • Working length: 3,100 mm • Max bending thickness: 6 mm at 3 meters • Distance between uprights: 2,550 mm • Throat depth: 400 mm • Daylight opening: 515 mm • Punch stroke: 250 mm • Table width: 80 mm • Fast approach speed: 0–180 mm/s • Working speed: 0–20 mm/s • Return/upstroke speed: 0–160 mm/s • Max hydraulic pressure: 275 bar • Main electric motor power: 15 kW • CNC control: CybTouch 15 PS (15" touchscreen, 2D programming, automatic bend sequence detection) • Axis configuration: Rear gauge with 2 controlled axes (X + R) Additional equipment • Two heavy-duty front support arms • Front guides movable longitudinally • Adjustable-height front supports • Laser safety system AKAS-LC • EU-compliant operator safety system • Pneumatic folding/hemming table • Mechanical grip for lower tools • Tooling included: • Punch: Knife P120.35.R08, height 120 mm, angle 35°, radius R0.8, sections 3 x 835 mm + 1 x 805 mm • Bottom die/block: Model M460.R, V openings 16/22/35/50 mm, sections 3 x 835 mm + 1 x 805 mm, suitable up to 6 mm sheet metal

Year of construction: 1994, condition: used, Pressing force: 2250kN, max. working length: 4100mm, approach speed: approx. 150mm/s, max. working speed: 10mm/s, max. ram stroke: approx. 215mm, max. throat depth: approx. 380mm, distance between uprights: approx. 3600mm, table width: 100mm, working height: approx. 1080mm. Machine dimensions: approx. 5100mm/2000mm/3000mm, machine weight: approx. 15.5t. An on-site inspection is possible. Itjdpfx Aozun T Espion

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Itodpfx Ajy Rtg Ejpion

Year of construction: 1995, condition: used, Rated force: 6000kN, rated force travel: 1.7mm, rated energy: 10.2kJ, stroke: 100mm, stroke rate: 45/min, installation height: 360mm, tool holder adjustment: 50mm, clear width of press frame: 580mm, table width: 550mm, table depth: 620mm, tool holder width: 550mm, tool holder depth: 430mm, motor power: 15kW, length: 2435mm, width: 1500mm, height: 2750mm, weight: 13.5t, an on-site inspection is possible. Itjdpfx Aszybugepien