Used other metal presses for sale (151)

Year of construction: 1978, condition: ready for operation (used), Pressing force: 63t, working dimensions X/Y: 620mm/500mm, motor power: 22kW. An on-site inspection is possible. Gijdpfeyu T Dwjx Achsw

Year of construction: 2003, condition: excellent (used), Press-in device for ceramic pins in rotor shafts Principle of operation: The ceramic pins are fed by means of an oscillating conveyor pot via a pneumatic hose to an inspection station in which the position of any one-sided hole is checked. This is done with an optical sensor. Incorrectly positioned parts are conveyed by a pneumatic slide into a collecting container. Pins in the correct position are fed through another pneumatic tube to the separator of the press-fit tool. The actual press-fit process is also performed pneumatically with a punch guided by a roller bearing. First, a manually adjustable pressure p1 is used to check that the pin is not pressed too lightly into the shaft. A pressure p2, which is also manually adjustable, then presses the pin into the rotor shaft as far as it will go. A disk spring package preloaded with 5,000 N prevents excessive force from being exerted on the pin and shaft. The rotor shaft must be manually inserted into the die, removed and clamped by an operator. This process is safeguarded by a light curtain. Design Self-supporting station integrated in complete system for pressing in ceramic pins and balls. Rotor shafts Ø: 5 - 20 mm L: 50 - 200 mm Ceramic pin Ø: 3 mm L: 5 +/- 0,2 mm Working cycle Power: 15 strokes per minute Safety safety door with safety switch Category 4 light curtain Emergency off Airborne sound emission Continuous sound pressure at the workplace: 70 dB (A) Electrical connection Voltage: 230 V AC Frequency: 50 Hz Fuse. 10 A Compressed air connection Operating pressure: 5 - 7 bar Dimensions L x W x H = 850 x 950 x 1020 mm Weight: approx. 110 kg Year 2003 Electrically height adjustable work table Giodpfeib H U Dsx Achsw Documentation and wiring diagrams are available

Condition: good (used), Year of construction: 1971, functionality: fully functional, pressing force: 30 t, total length: 2,000 mm, total width: 1,500 mm, total height: 3,000 mm, overall weight: 4,500 kg, Overhaul 2005 Filling height 140 mm Gedpfju Rn Hxox Achsiw Strokes per minute 7.5 - 21.5 Top punch stroke 175 mm Top ram adjustment 115 mm Top ram pre-spring 20 mm Total connected load 15 KW

Year of construction: 1967, condition: good (used), Overhauled in 2000, hydraulics and electrical system updated, table dimensions 3600x400. Gjdpfx Ajlml Drschsiw

Condition: good (used), Year of construction: 1973, functionality: fully functional, overall weight: 4,500 kg, total length: 2,000 mm, total width: 1,500 mm, total height: 3,000 mm, power: 30 kW (40.79 HP), Overhaul in 2007 Filling height 140 mm Strokes per minute 8.0 - 25.0 Top punch stroke 175 mm Upper punch adjustment 115 mm Top ram pre-spring 20 mm Total connected load 9 KW Giodpfx Acju Rn S Ijhsw

Year of construction: 1999, condition: used, Technical Data Connection Data Giodpfx Ajxcuqajchsw Power supply: 380 V Drive: three-phase motor, 0.75 kW, with electronic brake Processable cables Cross-section: up to 6 mm Motor speed: 1420 rpm, fixed Pressing force: 20 kN Stroke length: 40 mm Stroke time: 0.3 s Top dead center (TDC) infinitely adjustable Variable bottom dead center (BDC)

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Gjdpfx Ajyq R D Hechoiw

Year of construction: 1973, condition: ready for operation (used), A single-column eccentric press Edelhoff including transfer unit is available. Press force: 130t, stroke adjustment: 30mm-130mm, ram adjustment: 75mm, stroke rate: 45/min, table dimensions X/Y: 1000mm/700mm, weight: approx. 5000kg. An on-site inspection is possible. Giodpfxoyq R D Tj Achjw

Condition: good (used), For sale is a punching machine from Bruderer. Model BSTA 20. The pressing force is 20 tons. Please do not hesitate to contact us if you have any further technical questions. Giodpsi Ey Ahefx Achow

Year of construction: 1991, condition: ready for operation (used), Press force: 250kN, Operating pressure: 280bar, Stroke: 300mm, Installation height: 500mm, Reach: 250mm, Oil filling: 280l, Ram speed: 105mm/s, Weight: approx. 2550kg. Documentation available. An on-site inspection is possible. Gjdpfx Aoynlubjchjiw

Year of construction: 2007, condition: used, max. wheel diameter 500 mm dayligth 200 mm Maximum workpiece outer diameter: 500 mm Maximum workpiece height: 200 mm Minimum workpiece inner diameter: 60 mm Hold-down force of inner pressure ring: 120 kN Hold-down force of outer pressure ring: 240 kN Giedpfx Aoyan Nxochew Spreading force of the spreading mandrel: 60 kN Extrusion force: 800 kN Pump capacity for hardening oil flow, basic device: 750 l/min Hardening oil tank capacity of the hardening machine: approx. 2000 liters Hydraulic oil tank capacity: 400 liters Operating pressure, pneumatics: 6 bar

Year of construction: 2007, condition: used, max. wheel diameter 500 mm dayligth 200 mm Maximum workpiece outer diameter: 500 mm Maximum workpiece height: 200 mm Minimum workpiece inner diameter: 60 mm Hold-down force of inner pressure ring: 120 kN Hold-down force of outer pressure ring: 240 kN Spreading force of the spreading mandrel: 60 kN Extrusion force: 800 kN Pump capacity for hardening oil flow, basic device: 750 l/min Hardening oil tank capacity of the hardening machine: approx. 2000 liters Gsdpsyan N Ssfx Achsiw Hydraulic oil tank capacity: 400 liters Operating pressure, pneumatics: 6 bar

Year of construction: 1992, condition: ready for operation (used), A Bruderer differential stroke press (knuckle-joint press) is available. Press force: 3200kN, installation height min./max.: 420mm/520mm, clamping table dimensions X/Y/Z: 1400mm/1000mm/150mm, table height: 1030mm, ram dimensions X/Y: 1000mm/800mm, belt passage width and height: 400mm/450mm, machine dimensions X/Y/Z: approx. 2350mm/1850mm/4550mm. Documentation available. On-site inspection is possible. Gedpfx Ajvdu Nvochoiw

Year of construction: 2012, condition: ready for operation (used), A Sahinler workshop press is available. Press pressure: 150t, max. pressure: 244bar, working width: 1520mm, piston stroke: 300mm, ram dimensions X/Y: 200mm/1520mm, through hole: 100mm, table dimensions X/Y: 600mm/1520mm, max. installation height: 610mm. Forward speed: 9mm/s, retraction speed: 10mm/s, working speed: 5mm/s, drive power: 11kW. Machine dimensions X/Y/Z: approx. 2500mm/1000mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Gjdpfxjv N I Ags Achsiw

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Godpfx Acoyiflmjhjiw

Year of construction: 2018, condition: ready for operation (used), A dismantled Mecamaq hydraulic press is available. Pressing force: 100t, max. pressure: 290bar, main piston diameter: 200mm/120mm, auxiliary cylinder diameter: 40mm/25mm. Main cylinder working stroke: 500mm, max. installation height: 800mm, working height: 800mm, effective dimensions X/Y: 700mm/500mm, table dimensions X/Y: 800mm/500mm, working speed: 6mm/s, return speed: 150mm/s. Max. tool dimensions X/Y: 800mm/600mm, max. tool weight: 1000kg. Machine dimensions X/Y/Z: approx. 1000mm/1350mm/2750mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Giodpfx Aowkiiijchew

Year of construction: 2005, condition: ready for operation (used), Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible. Giedpfxjxl Upno Achsw

Year of construction: 1998, condition: ready for operation (used), Pressing force: 1600kN, installation height: 750mm, max. ram stroke: 500mm, clamping surface X/Y: 700mm/600mm, column passage: 800mm, lateral column opening: approx. 450mm. Distance between clamping plate and floor: 680mm, ram bore diameter H7: 60mm, rapid traverse down/up: 500/400mm/s, max. working speed: 35mm/s. Dimensions X/Y/Z: 2000mm/1500mm/3600mm, weight: approx. 16000kg, control: Panelware. Documentation available. An on-site inspection is possible. Gedpettbd Tofx Achoiw

Year of construction: 1993, condition: ready for operation (used), Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible. Gjdpfjv Tnytsx Achoiw

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Gedpfjw N Shksx Achsiw

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Gijdoxq Exwjpfx Achew

Year of construction: 2018, condition: ready for operation (used), A roller press (briquetting press) Köppern Maco is available. Production capacity: 10 MT/h, roller diameter: 720mm, roller width: 315mm, briquetting shapes: bolted segments, motor type: Siemens electric motor, motor power: 190kW, gearbox type: spur gear, machine dimensions X/Y: approx. 5000mm/5000mm, weight: approx. 15000kg, control: Siemens S7-300 Simatic. Including two new segment sets and one installed segment set. Documentation available. On-site inspection is possible. Gjdpeu Dal Hsfx Acheiw

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Gedpfxevyirke Acheiw

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Gisdot Nhmhjpfx Achew

Year of construction: 1998, condition: ready for operation (used), Pressing force: 2000kN, working width: 3100mm, column passage: 3240mm, max. stroke: 400mm, throat depth: 250mm, max. installation height: 965mm, NC axes: 11, hydraulic volume: 550l, machine dimensions X/Y: approx. 4400mm/3400mm, weight: approx. 16600kg, control: Cyb-Tech Infinitron. Documentation available. On-site inspection is possible. Giodpfxowhp Nde Achsw