Used other metal presses for sale (145)

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 606 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] Redpsuhak Iefx Ah Decf FLOOR DIMENSIONS - Dimensions (length-width-height) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Condition: used, TECHNICAL DETAILS Rcsdpfx Asuhakzoh Dsf - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] - Slide stopping time : 50 [ms] - Number of working hours : 440 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((length-width-height)) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Year of construction: 1992, condition: ready for operation (used), Press force: 135t, bending length: 3000mm, nominal bending length: 2600mm, frame width: 2600mm, throat depth: 250mm, ram stroke: 120mm, working speed: 7mm/s, machine weight: approx. 6800kg. An on-site inspection is possible. Rcedpfx Ahey Hvrco Def

Year of construction: 2007, condition: used, max. wheel diameter 500 mm workpiece height max. 200 mm dayligth 200 mm Rjdpfxeyan Nxs Ah Dscf Control Simens Simatic MultiPanel weight of the machine ca. 7,3 t dimensions of the machine ca. 3900x1800x3300 mm Maximum workpiece outer diameter: 500 mm Maximum workpiece height: 200 mm Minimum workpiece inner diameter: 60 mm Hold-down force of inner pressure ring: 120 kN Hold-down force of outer pressure ring: 240 kN Spreading force of the spreading mandrel: 60 kN Extrusion force: 800 kN Pump capacity for hardening oil flow, basic device: 750 l/min Hardening oil tank capacity of the hardening machine: approx. 2000 liters Hydraulic oil tank capacity: 400 liters Operating pressure, pneumatics: 6 bar

Year of construction: 1992, condition: used, Pressing force 40 t Effective stroke 500 mm power capacity 17 kW tracking travel 48 mm Overrun time 110 ms safety distance 176 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Rcodpfx Ahjzdvcaj Dof Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale!

Condition: as good as new (ex-display), Year of construction: 2020, machine/vehicle number: C1-140B_11, functionality: fully functional, operating hours: 10 h, CrimpOne C1-140B - Battery-Powered Hydraulic Hose Crimper Technical Specifications Max. crimping force: 1400 kN Crimp range: 10 - 61 mm Max. hose size: 1 1/4 inch Die type: 140 Max. opening: +25 mm Rjdpfsy A Nvtsx Ah Djcf Max. die length: 80 mm Servo motor: 1.6 kW Power supply: 12 V (DC) Crimps per hour: 250 pcs Length: 460 mm Width: 280 mm Height: 370 mm Weight: 85 kg Noise level: 71 dB(A) In stock, available immediately!

Year of construction: 1993, condition: ready for operation (used), Pressing force: 2000kN, max. installation height: 550mm, total power requirement: 72kW, operating pressure: 210bar. Including feed unit. On-site inspection is possible. Rsdpfjv Tnytex Ah Docf

Year of construction: 2007, condition: ready for operation (used), A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible. Redpfjx U Dwpjx Ah Djcf

Year of construction: 2002, condition: ready for operation (used), A CNC press brake Amada is available. Press force: 800kN, bending length: 2500mm, press beam length: 2570mm, distance between uprights: 2125mm, throat depth: 420mm, max. stroke: 350mm, installation height: 620mm, table width: 60mm, table height: 960mm. Machine dimensions X/Y/Z: approx. 3300mm/1600mm/2750mm, weight: approx. 6100kg, control system: Amada. Documentation available. An on-site inspection is possible. Rcedpjzgwxnofx Ah Djf

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Rjdpfx Aholyr Ado Docf

Year of construction: 2007, condition: used, max. wheel diameter 500 mm dayligth 200 mm workpiece height max. 200 mm Control Simens Simatic MultiPanel weight of the machine ca. 6 t dimensions of the machine ca. 4000x1700x3250 mm Maximum workpiece outer diameter: 500 mm Maximum workpiece height: 200 mm Minimum workpiece inner diameter: 60 mm Rcsdpfx Aheyan N So Dsf Hold-down force of inner pressure ring: 120 kN Hold-down force of outer pressure ring: 240 kN Spreading force of the spreading mandrel: 60 kN Extrusion force: 800 kN Pump capacity for hardening oil flow, basic device: 750 l/min Hardening oil tank capacity of the hardening machine: approx. 2000 liters Hydraulic oil tank capacity: 400 liters Operating pressure, pneumatics: 6 bar

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Rodpew N Shkjfx Ah Docf

Year of construction: 2005, condition: ready for operation (used), Clearance between the frames: 890mm, throat depth: 200mm, bending width: 1000mm, press force: 280kN, connected load: 5.5kVA, required fuse protection: 3x 16A, weight: 3.5t. An inspection on site is possible. Redpfx Aezbb R Eeh Dscf

Year of construction: 1989, condition: ready for operation (used), Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible. Rcjdpfjvyirkjx Ah Dsf

Year of construction: 1990, condition: ready for operation (used), Press force: 100t, throat depth: 320mm, table dimensions X/Y: 850mm/610mm, ram dimensions X/Y: 600mm/355mm, stroke range: 10mm-130mm, ram adjustment: 80mm, stroke rate: 56rpm, installation height: 300mm, machine dimensions X/Y/Z: approx. 1900mm/1900mm/3150mm, weight: approx. 9000kg. On-site inspection is possible. Redpfx Aeyiflmsh Dscf

Year of construction: 1981, condition: ready for operation (used), Press force: 650kN, Stroke: 150mm, Pressure piston diameter: 190mm, Column spacing X/Y: 950mm/460mm, Installation height: 500mm, Table dimensions X/Y: 900mm/870mm, max. stroke: 150mm, Operating pressure: 200bar, Machine dimensions X/Y/Z: approx. 1500mm/1750mm/2400mm, Weight: approx. 3000kg. Documentation available. An on site inspection is possible. Rcodeyq R D Hepfx Ah Dsf

Year of construction: 2012, condition: ready for operation (used), A Sahinler workshop press is available. Press pressure: 150t, max. pressure: 244bar, working width: 1520mm, piston stroke: 300mm, ram dimensions X/Y: 200mm/1520mm, through hole: 100mm, table dimensions X/Y: 600mm/1520mm, max. installation height: 610mm. Forward speed: 9mm/s, retraction speed: 10mm/s, working speed: 5mm/s, drive power: 11kW. Machine dimensions X/Y/Z: approx. 2500mm/1000mm/2400mm, weight: approx. 3000kg. Documentation available. On-site inspection is possible. Rodpfsv N I Agsx Ah Docf

Condition: used, TECHNICAL DETAILS - Table dimensions : 300 x 200 [mm] - Cutting strength : 1700 [daN] - Max. slide travel : 125 [mm] - Max. approach speed : 360 [mm/s] Rjdpfx Ahjuhakuo Dscf - Slide stopping time : 50 [ms] - Number of working hours : 1315 [h] - Lower extractor POWER SUPPLY - Operating voltage : 3x 400 [V] - Frequency : 50 [Hz] - Nominal current : 5.5 [A] - Installed power : 2 [kW] FLOOR DIMENSIONS - Dimensions ((length-width-height)) : 1200 x 1100 x 2200 [mm] - Weight : 725 [kg]

Year of construction: 1995, condition: ready for operation (used), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible. Rcjdpowm Nn Rjfx Ah Dof

Year of construction: 2010, condition: ready for operation (used), A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible. Rjdpfx Ahsxv A E Ss Dscf

Year of construction: 1993, condition: ready for operation (used), Max. working length: 2600mm, max. pressing force: 700kN, stroke: 8-60mm, connected load: 8kW, weight: 4.5t, with documentation. Rsdpfx Ahjpcgy Ao Docf

Year of construction: 2026, condition: used, Machine no.: M0753/300/3/28/07, year of manufacture: 2007, rated force: 3,000 kN, rated power: 43 kW, machine weight: approx. 43,000 kg, strokes: approx. 25-100 mm, return time: approx. 0.209 s, stroke length: approx. 40-315 mm, maximum plunger adjustment: 150 mm, maximum installation space: 650 mm, upstream units: coil unrolling reel SOPREM S2371-EM-91-BP55, serial no.: 221003, year of manufacture: 2003, weight: 3,000 kg, SOPREM 1676-E-VV, year of manufacture: 2003, single-sided alignment unit, serial no.: 231003, power: 5.5 kW, feed unit RAZIOL EBAD 4000KL, oil unit, serial no.: 029, year of manufacture: 2017, control system: BECKHOFF, mounted on chassis, recorded coupling hours (November 2025): 34,303 h, total parts: 41,131,300. Rcodpfx Ajzqzd Njh Dof

Condition: ready for operation (used), Parker 80 CE 082 Hose press Crimping machine with hose jaws Power: 1.5 kW Jaw sizes: 1/2" ; 3/8" ; 3/4" ; 1" ; 1/4" You are welcome to come by for a viewing. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Rcodpfx Ahsu Hidko Djf Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Year of construction: 1991, condition: ready for operation (used), A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible. Rcedpfxsw A R Spj Ah Dsf

Year of construction: 2018, condition: ready for operation (used), This MILLUTENSIL MIL 163 was manufactured in 2018. A robust hydraulic press with a table size of 2000 mm by 1200 mm, it can handle a maximum load of 5000 kg and exerts up to 163 tons of pressure. Ideal for applications like mold adjustment, injection molding, and die casting. Control is manual or semi-automatic. Contact us for more information. Rcodjx D Rliopfx Ah Def Additional information • Axis Travel: Pressing axis: 1 (vertical) • Maximum Pressure: 163 tons • Table / Bed Dimensions: Length 2000 mm / Width 1200 mm • Maximum Load Capacity: 5000 kg • Machine Weight: 6000 kg • Applications: Mold adjustment and testing, injection molding, die casting, rubber molding