Used Darley for sale (32)

Condition: ready for operation (used), Year of construction: 2002, Very well-maintained, used press brake from Darley. Type: EHP LS 230 43 37 Capacity: 4300 x 230 tons Nwjdpfsy Sziksx Aa Esg Delem DA 66W CNC control CNC crowning Y1, Y2, X1, X2, R1, R2, Z1, and Z2 axes CNC controlled Hydraulic Wila New Standard top and bottom clamping Includes 1 set of tooling as shown in the picture.

Condition: good (used), Year of construction: 2005, power: 15 kW (20.39 HP), operating speed: 10 mm/s, total length: 4,000 mm, total width: 2,000 mm, total height: 3,000 mm, overall weight: 11,500 kg, controller manufacturer: Delem DA65, working width: 3,100 mm, bending force (max.): 175 t, distance between stands: 2,550 mm, control type: CNC control, number of axes: 5, Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 175T Beam stroke: 225mm Table Width: 150mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Control: yes Crowning: yes Hydraulic toolclamping: yes Power: 15kW Length: 4000mm Width: 2000mm Height: 3000mm Weight: 11500kg Nodpfx Aajyvz H Rj Eewg

Condition: excellent (used), Year of construction: 2004, power: 25 kW (33.99 HP), stroke length: 350 mm, operating speed: 10 mm/s, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, overall weight: 22,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Delem DA 65W, working width: 4,300 mm, bending force (max.): 230 t, distance between stands: 3,700 mm, control type: CNC control, number of axes: 5, actuation type: hydraulic, Press brake DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Make: DARLEY Type: EHP-LS 230 43/37 Control: Delem DA 65W Year: 2004 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Beam stroke: 350mm Table Width: 250mm Nedpfxeyvh S Ts Aa Eswg Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Height: 3400mm Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), functionality: fully functional, FOR SALE: Darley GS 3100 x 16 – Heavy-Duty Hydraulic Guillotine Shear Looking for a powerhouse for heavy plate shearing? Available is a high-quality hydraulic shear from the Dutch specialist Darley. This machine is built for demanding industrial environments and offers exceptional cutting capacity. TECHNICAL SPECIFICATIONS • Model: Darley GS 3100 x 16 • Year of Manufacture: 1989 • Max Cutting Length: 3100 mm • Max Plate Thickness: 16 mm (steel 450 N/mm²) • Cutting Angle: 2° • Motor Power: 22 kW • Machine Weight: Approx. 12,000 kg • Hydraulics: 400 L tank, 30 MPa max pressure • Voltage: 380 V KEY BENEFITS • High Capacity: A 16 mm cutting thickness over 3 meters is a rare and highly sought-after feature. Nwsdpfx Aasy Rvdas Eeg • Stability: The 12-ton mass ensures vibration-free and precise cutting even under heavy loads. • Reliability: Darley machines are famous for their over-engineered structures, making them extremely durable for long-term industrial use. An excellent choice for workshops handling heavy plates and requiring absolute operational reliability.

Condition: good (used), functionality: fully functional, pressing force: 110 t, table width: 2,500 mm, darley EHP 110 25/20 press brake with upgraded ESA S 630 control system press force 110 tons maximum working width 2500mm working width between uprights 2050mm throat depth 400mm Lasersafe Nwedpjy Nwdrsfx Aa Eeg crowning CNC controlled axes: Y1 / Y2: (upper beam) X-axis back gauge (moves the back gauge fingers forward and backward) Z1 / Z2-axis (width adjustment of the fingers) crowning delivered with 2 sets of upper blades transport dimensions: length 3500mm x 2520mm x depth 1800mm (control panel not included) weight approx. 8 tons

Condition: used, Year of construction: 1989, functionality: fully functional, power: 7.5 kW (10.20 HP), stroke length: 250 mm, oil tank capacity: 120 l, Hydraulic press brake Make: DARLEY Model: EHP Year of manufacture: 1989 Nwedpfx Asy Dqpdsa Ejg Technical Specifications Manufacturer: DARLEY Model: EHP 110 31/25 Year of manufacture: 1989 Usable bending length: 3,100 mm Press capacity: 110 t Throat depth: 250 mm Motor power: 7.5 kW Hydraulic oil: 120 L Dimensions: approx. L 3.5 x W 1.5 x H 2.45 m Weight: approx. 8.7 t Equipment • CNC control Delem DA 42 • Multi-opening die: V12, V20, V20, V16, V40, V70 mm • Straight punch, height 120 mm • Controlled axes: Y1, Y2, X • 2 support arms All information subject to change and without warranty. A powered demonstration is available at any time in our exhibition hall.

Condition: good (used), Year of construction: 1993, Used Darley guillotine shear Nedpeyzf Snjfx Aa Eowg Type VS 6008 Capacity 6050 x 8 mm Machine fully operational, frame needs to be welded (see last photo)

Condition: used, Year of construction: 2004, total length: 4,600 mm, total width: 2,200 mm, total height: 3,000 mm, Weight: 21.500 kg Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 12.2235 - Drive system: CNC - Control system brand: Delem Njdpfx Aajyvt Dzo Eswg - Power [kW]: 33.5 - Number of axes [pcs]: 6: Y1+Y2+X+R+Z1+Z2 - Press force [ton]: 300 - Max. working width [mm]: 4300 - Column gap [mm]: 3700 - Crowning system: CNC-controlled - Punch holder: Hydraulic - Tool holder type: WILA-standard - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4600mm x 2200mm x 3000mm (l x w x h) - Transport weight [kg]: 21500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Darley Type: GS 3100x13 Year: 1986 Control: Conventional Cutting width: 3100mm Cutting thickness: 13mm Electric Backgauge Motor-power: 22kW Incl. frontloader-arm Total dimensions: 3750x1900x2150mm Machine-weight: 10000kg - Year: 1986 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT Nsdpfownh Ncex Aa Eowg VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Nwsdpfx Aaeydpxvs Esg Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Machine weight: 21.500 kg

Condition: good (used), functionality: fully functional, Year of construction: 1998, sheet thickness (max.): 13 mm, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 18,400 kg, total length: 4,400 mm, total width: 2,350 mm, total height: 2,250 mm, cutting length (max.): 4,100 mm, Equipment: finger protection, safety light barrier, Cuttinglength: 4.100 mm Cutting thickness: 13 mm Back gauge: 1.000 mm Control: Darley Delem Featured with: - Sheetsupporters frontside 4000 mm - Footpedal Njdpfswc Sahox Aa Eswg - Material conveyor - Extra sets knives - Documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 440 x 235 x 225 cm Machine weight: 18.400 kg

Year of construction: 1978, condition: used, machine/vehicle number: 11566, working width: 4100 mm metal sheet thickness: 6 mm throat: 100 mm rear stop: 0 - 1000 mm power: 18,5 kW Nwodsy Auropfx Aa Ejg space needed: 4600 x 2200 x 1950 mm weight: 11000 kg

Condition: good (used), Year of construction: 1975, working width: 3,700 mm, cutting angle (min.): 2 °, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 12 mm, back gauge: 1,000 mm, oil tank capacity: 500 l, overall weight: 18,400 kg, total length: 4,500 mm, Equipment: documentation/manual, finger protection, For sale: 1 used hydraulic guillotine shear Manufacturer: Darley Model: GS3660x16 Year of manufacture: 1975 Technical Data: Distance between uprights: 3860 mm Cutting angle: 2° Hold-downs: 18 pcs. Oil capacity: approx. 500 l Total power requirement: 22 kW Weight: 18,400 kg Back gauge: 1,000 mm Equipment: - electric back gauge - cutting line illumination - front finger guard - ball rollers on the support table - side gauge - support arms - movable foot switch Nwjdpfsxfkr Sjx Aa Esg - operating manual

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, overall weight: 20,000 kg, controller model: Delem DA 66W, bending force (max.): 234 t, working length: 4,300 mm, TECHNICAL DETAILS Bending force: 2,300 kN Working length: 4,300 mm Distance between uprights: 3,700 mm MACHINE DETAILS CNC control: Delem DA 66W CNC-controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 Nwedpjylwbhefx Aa Esg Power: 26 kW Voltage: 230/400 V Weight: 20,000 kg EQUIPMENT CNC crowning system Hydraulic Wila New Standard upper and lower clamping

Condition: used, length: 2750width: 1100heigth: 2050weight approx.: 3500pressure: 50bending length: 2550 CNC Bending Press 3 Axes Y1, Y2, and Z Hydraulic Tool Clamping for the Upper Tool Nedpowiatpofx Aa Eswg Darley System Technical Details: Machine Type: EHP 50.25/20 Max. Pressing Force: 500 kN Bending Length: 2550 mm Downward Speed: 100 mm/s Max. Pressing Speed: 13.5 mm/s Return Speed: 75 mm/s Stroke Length: 120 mm Cylinders: 2 pcs Motor Power: 5.5 kW Oil Tank: 100 Liters

Condition: used, pressure 150 t chamfer lenght 4300 mm distance between columns 3700 mm ram stroke speed 100 mm/sec working feed 8 mm/sec return speed 80 mm/sec stroke 175 mm table height 920 mm Control DELEM DA 52 total power requirement 11 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 4800 x 1700 x 2850 mm Equipment: - Controlled axes Y1 - Y2 - X, as well as CNC crowning - DELEM DA52 CNC control Nedpfx Aajv S Iryo Ejwg - Electric backgauge (X-axis) - 4x manually adjustable stop fingers - 2x front support arms - AMADA UKB system upper tool holder - Side guard - Foot switch

Condition: good (used), Year of construction: 2004, functionality: fully functional, Used Darley CNC press brake Type EHP LS 130 31 25 CL Nwedpfoxzgixox Aa Eog Capacity 3100 x 130 tons Delem DA 65W CNC control Y1, Y2, X and R axes CNC controlled CNC crowning Hydraulic Wila NS upper and lower clamping

Condition: good (used), Year of construction: 1994, functionality: fully functional, Used press brake by Darley Type EHP 50 20 15 Nodpfx Asxq Dfvsa Ejwg Capacity 2050 x 50 tons Equipped with new Esa S630 control and Merlino lasersafe Includes set of tools

Condition: not inspected (used), Press brake Darley Type EHP 260.43/37 year of construction 1992 converted to Delem control DA-56s Without light barriers, does not comply with current UVV regulations CNC back gauge Pressing force 2600KN Motor power 18.5 KW Working width max. 4300mm throat 300mm Weight approx. 23,000kg The offer is aimed exclusively at traders within the meaning of §14 BGB Nwjdpfxjuhf Tzo Aa Ejg No sale to private individuals!

Year of construction: 1975, condition: ready for operation (used), Max. sheet thickness: 16mm, max. cutting length: 3000mm, weight: approx. 15t. The machine is in good condition. An on-site inspection is possible. Nedpfx Aexc Nikea Ejwg

Year of construction: 2000, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible. Nwedpfx Aew N Shkja Eog

Year of construction: 1992, condition: ready for operation (used), Working length: 4300mm, pressing force: 2000kN, connected load: 15kW, weight: 18t, including tools. Nwjdpfx Aaei Dx Sbo Eog

Year of construction: 1997, condition: ready for operation (used), Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t. Nsdpfxjgcbpgo Aa Eowg

Year of construction: 1997, condition: ready for operation (used), Working width: 3050mm, max. cutting capacity: 19mm, length: 3720mm, width: 2460mm, height: 2507mm, weight: 18t. Nwedpfx Asgcbpkoa Esg

Year of construction: 1998, condition: ready for operation (used), Working width: 3050mm, max. cutting capacity: 9mm, length: 3500mm, width: 2500mm, height: 2000mm, weight: 10t. Nwedpfx Aogcbpcea Esg