Used telehandlers for sale (227)

Condition: new, Year of construction: 2026, load capacity: 8,000 kg, lifting height: 45,900 mm, total length: 9,220 mm, Telescopic forklift Magni RTH 8.46 Drive Diesel Year built 2026 Lifting height (mm) 45,900 Lifting weight (kg) 8,000 Gijdjzluwlepfx Achjw

Condition: used, Year of construction: 2019, load capacity: 18,000 kg, lifting height: 9,630 mm, - Max. Tragkraft 18000 kg - Schwerpunkt der Last 600 mm - Max. Hubhöhe 9.63 m - Max. Reichweite 5.56 m - Neigungswinkel nach unten 105 ° - Neigungswinkel nach oben 12 ° Gijdpfxezlk Sxe Achsw - Äußerer Wenderadius (über Reifen) 5.5 m - Äußerer Wenderadius (mit Gabeln) 6.15 m - Niveauausgleich Regler 10 ° - Motornorm Stage IV / Tier 4 Final - Motor Modell OM 934 LA. E4-3 - Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 5100 cm³ - Nennleistung Verbrennungsmotor / Leistung (kW) 176 Hp / 129 kW - Max. Drehmoment / Motordrehzahl 750 Nm@1600 rpm - Kühlsystem des Motors Wasser - Number of batteries 2 - Batterie / Batteriekapazität 12 V / 120 Ah - Zugkraft 15970 daN - Typ Hydrostatisch - Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 - Max. travel speed 25 km/h - Feststellbremse Automatische negative Handbremse - Betriebsbremse Hydraulik - Steigfähigkeit - beladen 37 % - Pumpenart Verstellpumpe - Hydraulikfluss - Hydraulikdruck 205 l/min - 350 Bar - Motoröl 21 l - Hydrauliköl 290 l - Kapazität des Kraftstoffbehälters 315 l - Abgasnachbehandlung für Diesel (Typ AdBlue®) 63 l - Innenschallpegel (lpa) 80 dB(A) - Umgebungsgeräusch (LwA) 107 dB(A) - Vibrationswert an Händen/Armen < 2.5 m/s² - Sicherheit Zulassung der Kabine ROPS - FOPS cab (level 2) - Steuerungen JSM

Condition: new, Year of construction: 2026, load capacity: 13,500 kg, lifting height: 9,600 mm, total length: 6,000 mm, Telescopic forklift Manitou MHT 10135 Drive Diesel Year built 2026 Lifting height (mm) 9,600 Lifting weight (kg) 13,500 Godpfezlk Srsx Acheiw

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 25,800 mm, total length: 9,050 mm, Rotating forklift Gsdpfx Acozlk Sfshjiw Magni RTH 6.26 Drive Diesel Year built 2026 Lifting height (mm) 25,800 Lifting weight (kg) 6,000

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 660 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic forklift, rigid frame Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Technical condition: good Front tire type: Pneumatic Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire condition: 80 - 100% 3rd valve, full cabin Gisdezkwvcepfx Achsw

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 7,600 h, load capacity: 4,000 kg, lifting height: 8,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,400 mm, power: 107 kW (145.48 HP), fork length: 1,200 mm, empty load weight: 8,400 kg, total length: 5,370 mm, drive type: Diesel, construction width: 2,390 mm, Telescopic forklift, rigid Load center: 500 Mast type: Telescopic Speed class: 40 Condition: Ready for operation and fully functional Technical condition: good Front tire type: Pneumatic Front tire size: 460/70 R 24 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 460/70 R 24 Rear tire condition: 80 - 100% 3. Valve, air conditioning Gisdozkwu Tspfx Achsw Pneumatic system for trailer

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,800 h, load capacity: 4,000 kg, lifting height: 17,550 mm, fuel type: diesel, mast type: telescopic, construction height: 2,500 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 11,300 kg, total length: 6,270 mm, drive type: Diesel, construction width: 2,420 mm, Rigid telehandler Load centre: 500 Mast type: Telescopic Transmission: Torque converter Speed class: 20 Condition: Ready for use and fully functional Technical condition: Good Front tyres type: Pneumatic Front tyres size: 24 Gisdpfx Acjzkwu Dehsw Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 24 Rear tyres condition: 80 - 100% Description: The MT 1440 Easy telehandler was designed for construction sites where high lifting heights are required. With a lifting capacity of 4 t, it allows pallets to be safely placed at heights of up to 14 m. The robust machine features a low sheet-metal-clad door and an electric window to reduce the risk of breakage. The cab offers excellent visibility so the operator can constantly monitor site operations and track the load to its drop-off point. Thanks to numerous lashing points, the MT 1440 can be easily transported from one site to another. Its 42 cm ground clearance, 3 steering modes, and 4-wheel drive ensure adaptability to all types of terrain. 3rd control circuit, heating, full cabin, CE certificate, external mirror, rotating beacon,

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Drive Diesel Year built 2026 Lifting height (mm) 29,900 Lifting weight (kg) 6,000 Gijdpfx Aszk Rv Ijchsw

Condition: used, Year of construction: 2025, load capacity: 6,000 kg, lifting height: 25,900 mm, total length: 9,280 mm, Max. Tragkraft 6000 kg - höhe 25.90 m - Maximale seitliche Reichweite 21.70 m - Kippwinkel a4 12 ° - Schüttwinkel a5 110 ° - Drehung des Oberwagens 360 ° - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Crab Modus - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Tier 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie / Batteriekapazität 2 x 12 V / 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift 2 / 2 - Max. travel speed 40 km/h - Zugkraft 8600 daN Gijdpfx Aszk Rvuechjw - Parkbremse Automatische negative Parkbremse - Festellbremse - Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l -Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 d

Condition: used, Year of construction: 2020, operating hours: 6,146 h, 2020 | JCB 540-180 (18m) | Used Telescopic Forklift | 6146 hours Gjdpeyacbcefx Acheiw 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 49900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 52 inspection points 50 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition. Some sliders inside the boom structure where worn and have been recently replaced. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39836 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 1,633 h, load capacity: 6,000 kg, lifting height: 26,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating telescopic handler Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: Like new Technical condition: very good Front tire type: Pneumatic Front tire size: 18 - 22 Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 18 - 22 Gedpfxezkck Re Achoiw Rear tire condition: 80 - 100% Description: Thanks to the machine's 3-in-1 design (telescopic handler, crane, and aerial work platform), the MRT 2660 is a versatile tool for your handling operations. The MRT 2660 can lift up to 6 tons, and thanks to its pentagonal cross-section and exceptional 360° visibility, it maintains very precise control over your loads. The 360° rotation allows you to perform various tasks without having to move the machine. It can be used on wheels or outriggers, which provide a larger support area for safe operation. The MRT 2660 is intelligent, ergonomic, and comfortable, making it ideal for applications in the construction and industrial sectors. It is a powerful and precise tool that you won't want to be without! Various attachments, such as a personnel basket, winch, or bucket, are available for this telescopic forklift. 3rd valve, rear work lights, front work lights, heater, compliant with STVZO (German Road Traffic Licensing Regulations), air conditioning, CE certificate.

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 20,800 mm, fork length: 1,200 mm, total length: 7,890 mm, - Drehbarer Teleskopstapler RTH 6.21 - Maximale Tragkraft 6.000 kg (Schwerpunkt 600 mm) - Maximale Hubhöhe 20,80 m - Drehung 360° (durchgehend) - Nennleistung 100 kW (136 PS) bei 2.200 U/min - Max. Drehmoment 500 Nm bei 1.600 U/min - Hubraum 3,6 l - Zylinderzahl 4 in Reihe - Motorkonfiguration Dieselmotor mit Direkteinspritzung und Turboaufladung - Kühlanlage Wassergekühlter Ladeluftkühler - Antrieb Typ Hydrostatisch - Modell Danfoss / Rexroth - Max. Druck 480 bar - Fördervolumina Elektronisch geregelte Axialkolbenpumpe. Verstellmotor. - Getriebe Dropbox-Getriebe mit 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt - Achsen und Bremsen: Typ Achsen mit Planeten-Endantriebe - Hinterachse Lenkende Pendelachse mit hydraulischer Sperre - Vorderachse Pendellenkachse mit Niveauausgleich +/- 8 Grad - Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätig - Feststellbremse Negativbremse, hydraulisch betätigt - Reifengröße 445/65 R22,5 - Leistungen: Max. Fahrgeschwindigkeit 40 km/h - Max. Zugkraft am Lasthaken 72 kN - Steigfähigkeit 41% - Wenderadius (mit Gabelzinken) 5.900 mm - Gesamtgewicht, unbeladen 17.600 kg - Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt) 8.000 kg Giedpfx Acszkb Nfjhjw - Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt) 9.600 kg - Max. Betriebsdruck 350 bar - Anlagentyp Load sensing - Betriebspumpe Danfoss / Casappa Verstellpump - Verteiler für Ausleger- und Oberwagenbewegungen: Danfoss- Elektroproportionalventil SIL - Verteiler für Stützen Bosch Rexroth Elektrohydraulische Aktuatoren - Bewegungssteuerung Zwei 2-Achsen-Joysticks Danfoss mit Totmanneinrichtung Steuerung mit CAN-Bus-Technologie

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Drive Diesel Year built 2026 Gisdozi Hb Rspfx Achew Lifting height (mm) 29,900 Lifting weight (kg) 6,000

Condition: used, Year of construction: 2023, load capacity: 6,000 kg, lifting height: 21,800 mm, fork length: 1,200 mm, total length: 8,170 mm, - Max. Tragkraft 6000 kg - höhe 21.80 m - Maximale seitliche Reichweite 18.20 m - Kippwinkel 12 ° - Schüttwinkel 110 ° - Drehung des Oberwagens 360 ° - Gewicht 18000 kg - Reifenmodelle 445/65 R22,5 - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Hersteller Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FHT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 156 Hp / 115 kW - Max. Drehmoment / Engine rotation (min) 602 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A Giedpfjzi Hbwex Achjw - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift/2 / 2 - Max. travel speed 40 km/h - Zugkraft 8600 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 40.40 % / 45.50 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 260 l - Fassungsvermögen des Kraftstofftanks 270 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 68 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: used, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 31,000 mm, total length: 9,150 mm, Rotating forklift Magni RTH 6.31 Drive Diesel Year built 2026 Gsdpfxszi Hbqj Achjiw Lifting height (mm) 31,000 Lifting weight (kg) 6,000

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 34,700 mm, fork length: 1,200 mm, total length: 10,300 mm, - Lenkart: 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp: Dreifach-Teleskop - Steuerung mit Stützen: Stützenbefehle einzeln oder gleichzeitig - Motornorm: Stage V / Stufe 4 - Nennleistung Verbrennungsmotor / Leistung (kW) 211 Hp / 155 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with CVT - Getriebe Speedshift - Max. travel speed 40 km/h - Zugkraft 9300 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen Gsdpfxezi Hbkj Achjiw - Steigfähigkeit - beladen / unbeladen: 29 % / 38.70 % - Pumpenart: Verstellpumpe - Hydraulikfördermenge: 185 l/min - Hydraulikdruck: 350 bar - Motoröl: 13 l - Hydrauliköl: 300 l - Fassungsvermögen des Kraftstofftanks: 320 l - Abgasnachbehandlung für Diesel (AdBlue®): 24 l - Geräuschpegel im Fahrerstand (LpA): 68 dB - Außenschallpegel (LwA): 109 dB - Vibrationswert an Händen/Armen: < 2.50 m/s² - Lenkräder (vorne / hinten): 2 / 2 - Steuerungen: 2 Joysticks - Sicherheit Zulassung der Kabine: Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco): Standard

Condition: used, Year of construction: 2023, load capacity: 7,000 kg, lifting height: 34,700 mm, total length: 10,300 mm, Max. Tragkraft 7000 kg Gisdjzi Hbdjpfx Achsw - höhe 24.80 m - Maximale seitliche Reichweite 20.50 m - Kippwinkel 12 ° - Schüttwinkel 110 ° - Drehung des Oberwagens 360 ° - Antriebsräder (vorne / hinten) 2 / 2 - Lenkart 2-rad Lenkung, 4-rad Lenkung, Krebsgang - Stützentyp Zweifach-Teleskop - Steuerung mit Stützen Stützenbefehle einzeln oder gleichzeitig - Motor Hersteller: Yanmar - Motornorm Stage V / Stufe 4 - Motor Modell 4TN107FTT-6SMU1 - Nennleistung Verbrennungsmotor / Leistung (kW) 173 Hp / 127 kW - Max. Drehmoment / Engine rotation (min) 805 Nm @ 1500 rpm - Anzahl der Zylinder - Tragfähigkeit der Zylinder 4 - 4567 cm³ - Kühlsystem des Motors Wasserkühlung - Anzahl Batterien / Batterie 2 x 12 V - 12V Battery capacity 120 Ah - Battery starting current (EN)850 A - Getriebetyp Hydrostatic with Speedshift - Getriebe / Anzahl der Gänge (vorwärts) / Anzahl der Gänge (rückwärts) Speedshift / 2 / 2 - Max. travel speed 40 km/h - Zugkraft 9200 daN - Parkbremse Automatische negative Parkbremse - Festellbremse: Ölbad Lamellenbremsen an den Vorder- und Hinterachsen - Steigfähigkeit - beladen / unbeladen 32.40 % / 41.40 % - Pumpenart Verstellpumpe - Hydraulikfördermenge 185 l/min - Hydraulikdruck 350 bar - Motoröl 13 l - Hydrauliköl 300 l - Fassungsvermögen des Kraftstofftanks 320 l - Abgasnachbehandlung für Diesel (AdBlue®) 24 l - Geräuschpegel im Fahrerstand (LpA) 67 dB - Außenschallpegel (LwA) 108 dB - Vibrationswert an Händen/Armen < 2.50 m/s² - Lenkräder (vorne / hinten) 2 / 2 - Steuerungen 2 Joysticks - Sicherheit Zulassung der Kabine Kabine ROPS - FOPS Stufe 2 - Anbaugeräte Erkennungssystem (E-Reco) Standard

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, empty load weight: 4,710 kg, total length: 3,894 mm, drive type: Diesel, construction width: 1,813 mm, Telescopic handler, rigid frame Gedpfxjzif N To Achsiw Load center: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: New Front tire type: Pneumatic Front tire size: 12 R Front tire condition: 80 - 100% Rear tire type: Pneumatic Rear tire size: 12 R Rear tire condition: 80 - 100% Description: The MT 625 H telescopic handler is designed for use on construction sites for new builds and for renovations on low-rise buildings. The compact machine, with a width of 1.80 m and a height of less than 2 m, easily passes through doors and can maneuver well on congested construction sites. Its turning radius of 3.30 m and the 3 available steering modes ensure excellent maneuverability. This telescopic handler is easy to operate and is equipped with an ergonomic dashboard and the JSM joystick, which guarantee easy handling. The MT 625 H has a lifting capacity of 2.5 t and a lifting height of 5.85 m. Its 75 hp engine enables a speed of 25 km/h. Maintenance work is facilitated by the large opening of the engine compartment. The 90 l gear pump enables simultaneous movements of the boom and the telescope, thus providing an increase in productivity. 3rd valve, full cab, air conditioning, CE certificate.

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 15 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: electric, mast type: telescopic, construction height: 1,920 mm, power: 40 kW (54.38 HP), fork length: 1,200 mm, empty load weight: 4,755 kg, total length: 3,894 mm, drive type: Elektro, construction width: 1,813 mm, Rigid telehandler Load center: 500 mm Gsdpfszif N Hsx Achjiw Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 km/h Condition: New machine Technical condition: New Front tyres type: Non-marking Front tyres condition: 80 - 100% Rear tyres type: Non-marking Rear tyres condition: 80 - 100% Battery voltage: 100V Battery capacity: 348Ah Battery manufacturer: Manitou Battery type: Lithium-ion Battery year of manufacture: 2026 Battery condition: 80 - 100% Description: Manitou telehandler 625, 100% electric. The first 100% electric Manitou telehandler, specially developed for use in the construction sector! A compact, versatile machine for all your material handling needs—quiet, emission-free, and with no compromises in performance. With a lifting height of 5.85 m, a load capacity of 2.5 t, a ground clearance of 33 cm, combined hydraulic movements, and compact dimensions, the MT 625 e is a true all-terrain machine, also suitable for work at compact, low-emission jobsites such as city centers or indoor facilities. Equipped with lithium-ion batteries and an integrated charger, you can add an additional battery and charger to increase on-site autonomy and accelerate charging. 3rd valve, rear work lights, front work lights, heater, full cab, air conditioning,

Condition: used, Year of construction: 2008, operating hours: 4,569 h, 2008 | Terexlift GTH 4010 with bucket and forks | Used Telescopic Forklift | 4569 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 22000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 62 inspection points 60 approved ✅ 1 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Good operating telescopic , broken rear window, dripping tiltcilinder hose , top extensionguider broken , no further issues during inspection 📄 Want to see the full inspection, extra photos, or a video? Godezadi Uopfx Achsiw Tip: The reference "40860 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 2006, operating hours: 2,442 h, load capacity: 2,500 kg, lifting height: 6,000 mm, fuel type: diesel, construction height: 1,900 mm, power: 52 kW (70.70 HP), empty load weight: 4,800 kg, total length: 4,000 mm, drive type: Diesel, construction width: 1,850 mm, Telescopic forklift, rigid frame Condition: Ready for operation and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 20 - 40% Rear tire type: Solid rubber Gisdpfx Ajzkc I Nschew Rear tire condition: 20 - 40% Description: DIECI Apollo 190 telescopic loader -- 6m reach -- 2.5 ton lifting capacity -- year of manufacture 2006 -- 2442 operating hours -- mechanical quick coupler -- 4-cylinder Yanmar diesel engine, 52kW -- 4-wheel steering -- 4-wheel drive -- 3 steering modes -- 1-speed hydrostatic transmission -- cabin -- heater -- lighting system -- auxiliary hydraulics to fork carriage, 3rd valve -- including used pallet fork -- front tires 30% -- rear tires 30% -- joystick control -- used bucket (width: 1.90m) available at an extra cost -- price 1000,-- EUR -- overall height: 1.92m -- width: 1.85m -- length 4m -- weight: approx. 5 tons -- good condition -- new starter installed 3rd valve, heater, full cabin Cabin -- heater -- lighting system

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 3,342 h, load capacity: 2,000 kg, lifting height: 6,000 mm, fuel type: diesel, mast type: telescopic, construction height: 1,920 mm, power: 43 kW (58.46 HP), empty load weight: 5,000 kg, drive type: Diesel, construction width: 1,800 mm, Telescopic forklift, rigid frame Mast type: Telescopic Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Front tire condition: 0 - 20% Rear tire type: Solid rubber Rear tire condition: 0 - 20% Godpfjzkc I Asx Achoiw Description: Manitou MT620 – 6m reach – 2-ton lifting capacity – year of manufacture 2009 – 3342 operating hours – mechanical quick coupler – 3-cylinder Perkins diesel engine, 43kW – 4-wheel steering – 4-wheel drive – 3 steering modes – cab – heater – lighting system – auxiliary hydraulics to the fork carriage, 3rd valve – with used pallet forks – front tires 20% – rear tires 20% – new bucket available at an extra cost – overall height: 1.92m – width: 1.80m – weight: approx. 5 tons – good condition – all mechanical – very maneuverable 3rd valve, heater, Cab – heater – lighting system

Condition: used, Year of construction: 2013, operating hours: 3,732 h, fuel type: diesel, gearing type: automatic, Equipment: cabin, head guard, * JCB 541-70 WasteMaster telescopic handler * Year of manufacture: 2013 * Operating hours: 3,720 h Gijdpfxjzlndfe Achsw * Weight: 10,250 kg * 4x4x4 / All-wheel drive / All-wheel steering * Air conditioning * More pictures and videos available via WhatsApp * Information without guarantee and subject to prior sale.

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Drive Diesel Year built 2026 Gisdpjzhpkxjfx Achow Lifting height (mm) 29,900 Lifting weight (kg) 6,000

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 5 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,700 kg, total length: 4,310 mm, drive type: Diesel, construction width: 2,100 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Front tires size: 400/70-20 Rear tires size: 400/70-20 Godeyz Elhspfx Acheiw