Used milling machines (window production) for sale (138)

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 300-M270100, Schüco PBS profile machining center – 5-axis CNC, year of manufacture 2003, ready for immediate use Ihedpfxjxr N Rms Afaou TECHNICAL DETAILS X-axis travel: 6,650 mm Y-axis travel: 800 mm Z-axis travel: 500 mm X-axis feed rate: 0–40 m/min X-axis rapid traverse: 40 m/min Y- and Z-axis feed rate: 0–30 m/min Y- and Z-axis rapid traverse: 30 m/min B-axis rotation: 0–90° continuous C-axis rotation: 0–360° continuous B- and C-axis rotation speed: 10,000°/min Positioning accuracy within a macro: max. 300 mm ±0.1 mm Positioning accuracy over a 6,000 mm length: < ±0.15 mm MILLING Maximum tool dimensions for milling and drilling: Ø 50 mm, length = 60 mm Maximum tool dimensions for disc milling cutters: Ø 300 mm Maximum spindle motor power: 7 kW Disc milling cutter spindle motor power: 7 kW Spindle speed: 0–30,000 rpm Tool change time: < 15 s (clamp to clamp) Tool holder: HSK-E-40 steep taper Tool magazine: 9 plus 1 positions Total machine weight: 6.5 tons WORK AREA Number of clamping blocks: 8 units Clamping block positioning: automatic Maximum profile length for 3-sided machining: 6,650 mm Maximum profile length for 5-sided machining: 6,100 mm Maximum profile cross-section with maximum tool length: 300 mm x 230 mm

Condition: good (used), Year of construction: 2011, Year: 2011 - technically efficient, ready to work - after full service - 3-spindle - 2 copying templates - pneumatic profile clamps Isdpfx Aott Abxofajhu - infeed and outfeed feeders - cooling and lubrication installation

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1500050123, rotational speed (max.): 18,000 rpm, working length: 12,000 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. speed: 18,000 rpm Machining length: 12 m Pneumatic collets: 20 pcs MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3 ~ Frequency: 50 Hz Current draw: 76 A Operating pressure: approx. 8 bar Iedoxnz Ivepfx Afaohu EQUIPMENT Automatic tool changer Angle head

Condition: new, Year of construction: 2025, The 5-axis machine is designed for the industrial machining of aluminium and steel profiles with large volume and weight. The machine is equipped with a 450 mm saw blade. Window construction profiles, special fabrications, façade profiles, and steel profiles are suitable for processing on this machining centre. The frame is made of a welded construction that is mechanically machined. The material thickness of the frame exceeds 14 millimetres to ensure a flat surface and to avoid deformation during transport and/or movement of the machine. The frame is fitted with 12 adjustable steel feet that adapt to any type of flooring, each equipped with rubber pads to prevent the transmission of vibrations to the floor. A movable carriage made from welded steel tubing is mounted on the frame and connected via multiple supports to guarantee maximum stability and to prevent deflection of the support even during demanding operations on steel or other high-strength materials. Machining area X: 7,100 mm Ijdpfx Asxt D Szjfaehu Machining area Y: 460 mm (4 axes) Machining area Z: 300 mm Machining axis A: 180° Machining axis C: 360° Maximum speed X: 90 m/min Maximum speed Y: 60 m/min Maximum speed Z: 30 m/min Maximum speed A: 3,600°/min Maximum speed C: 1,800°/min

Condition: new, Year of construction: 2025, The SZ 200 is a 4-axis milling machine designed for a wide range of production processes and precisely tailored to the needs of various industries. It is a unique, reliable, and cost-effective product that optimizes working conditions for operators. The SZ 200 comes equipped with four automatic clamping devices and a high-performance electrospindle. With a power output of 5.6 kW and a speed of 20,000 rpm, it easily handles all production requirements. The machine features comprehensive equipment: enclosure, tool changer, standard clamping system, and tools. The ergonomic control panel, like the entire machine, is extremely compact. Even complex profiles and machining operations can be carried out within a footprint of just 10 m². The tool changer offers 12 tool positions. X-axis travel: 3,010 mm Y-axis travel: 245 mm – 320 mm Z-axis travel: 250 mm A-axis rotation: 180° Isdpfx Asxt D R Defashu X-axis max. speed: 55 m/min Y-axis max. speed: 40 m/min Z-axis max. speed: 30 m/min A-axis max. speed: 3,000°/min

Year of construction: 2006, condition: good (used), functionality: fully functional, Technical Specifications - Elumatec SBZ 122/20 Year 2006 16KW Ihodpow A Ipfefx Afaju General Data Measurement width: 4622.8 mm Measurement depth: 1828.8 mm Measurement height: 2489.2 mm Machine weight: 1814.9 kg Main Drive Spindle speed range: 21,000 rpm Spindle motor power: 8.5 HP Axis Travel X-AXIS Travel: 3777 mm Y-AXIS Travel: 350.5 mm Z-AXIS Travel: 279.4 mm Machine can be seen in operation in department 76 Available from week S38/S39 Price includes loading

Condition: new, Year of construction: 2025, Single-spindle copy milling machine KF 227 Ihodexta Rtjpfx Afasu Versatile use for plastic, aluminium, and steel profiles

Condition: used, ROTOX copy milling machine type KF Iodpfx Ajxgd Eusfashu

Year of construction: 2008, condition: excellent (used), ELUMATEC SLK 118 3-Axis CNC Profile Machining Center.Template-free Profile Copy Router with (3) Controlled axii; designed for machining aluminum and thin-walled steel profiles and extrusions, aluminum, PVC, light alloyed steel.It is particularly suitable for companies who are automating their door production processes; designed for the door and window sector; machining from above, rotate workpiece for machining other side.Specifications:Traverse X-axis 2450 mm/ V max. 36 m/min. (with double linear guides)Traverse Y-axis 350 mm/ V max. 15 m/min.Traverse Z-axis 280 mm/ V max. 15 m/min.Spindle speed 18,000 rpm6.5 HP (4.5 kw) Motor-driven spindle,Routing spindle cooling device(4) Tool holders for tools.Dimensions: 3100 x 1850 x 2250 mm (122" x 73" x 89")Weight: 1400 Kg (3087 Lbs.)Features: PC Touch Screen Control w/Windows Software3-axis Control Light Barrier for operator protection;(4) Horizontal Material ClampsPulsed Coolant SystemCollet holderQuick-action chuckNOTE: The machine is in excellent condition an Ijdpexc Udgjfx Afaohu

Condition: excellent (used), Year of construction: 2020, functionality: not functional, machine/vehicle number: 222100410, milling height: 150 mm, spindle diameter: 280 mm, milling length: 400 mm, milling spindle speed (max.): 2,800 rpm, No reserve price - guaranteed sale at the highest bid! For milling transom and door profiles made of aluminum and PVC TECHNICAL DETAILS Milling height: max. 150 mm Milling depth: max. 110 mm Ihjdpfswaa Syex Afasu Milling length: max. 400 mm Profile height: max. 200 mm Milling cutter diameter: max. 280 mm Material stop swivel range: up to 60° to the right and left Drive Milling motor: 2.5 kW Speed: 2,800 rpm MACHINE DETAILS Maintenance has been performed by the manufacturer

Condition: new, Year of construction: 2025, functionality: fully functional, Company Tekstura d.o.o. sales new FOM Industry machines only in Slovenia. Ijdpsxu Uylofx Afaohu

Condition: like new (used), Year of construction: 2010, functionality: fully functional, input voltage: 380 V, type of input current: AC, number of slots in tool magazine: 8, spindle motor power: 7,500 W, number of spindles: 1, spindle speed (max.): 18,000 rpm, tool diameter: 180 mm, tool length: 160 mm, tool weight: 2,000 g, Equipment: documentation/manual, Machining center with 4 CNC-controlled axes for processing profile bars or parts made of aluminum. Well-maintained profile machining center!!! The machine is in exceptionally good condition and is well equipped! Iodjww Nyuspfx Afaehu Machining center with 4 CNC axes for processing bars or workpieces made of aluminum, PVC, and light metal alloys in general, as well as steel up to 2 mm. Tool magazine with 8 positions, also accommodates an angle head and a disc cutter, allowing the workpiece to be machined on 5 sides. Processes bars up to 4 m in one pass; with extension, up to 8 m is possible and the part is automatically fed through. The 4th CNC axis enables continuous rotation of the electrospindle from 0° to 180° to perform machining operations along the perimeter of the profile. In addition, a movable work table facilitates loading and unloading of the workpieces and significantly increases the possible machining cross-section. The machine is equipped with 3-D programming software. Barcode scanner. Accessories: - MG Pilot handheld control unit - 3-D Cam/Plus software - Second material stop for multiple allocation or extended lengths - Barcode scanner - Tool changer with 8 positions

Year of construction: 2002, condition: good (used), AXIS COURSES X AXIS (longitudinal) (mm) 7,700 Y AXIS (transverse) (mm) 470 Z AXIS (vertical) (mm) 420 AXIS A (spindle rotation) 0°  180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool attachment cone HSK - 63F Automatic tool holder coupling ● Cooling with heat exchanger ● AUTOMATIC TOOL MAGAZINE ON BOARD CARRIAGE Maximum number of tools magazine 8 Maximum number of angle heads that can be inserted into the tool magazine 2 Maximum blade diameter that can be inserted in the magazine (mm) Ø = 180 Ihjderupldepfx Afasu FUNCTIONS. Multipiece operation ● Dynamic pendulum operation ● MACHINABLE FACES With direct tool (top face, side faces) 3 With angle unit (side faces, heads) 2 + 2 With blade tool (top face, side faces and heads) 1 + 2 + 2 TAPPING CAPACITY With compensator M8 Rigid (optional) M10 WORKPIECE CLAMPING Standard number of vices 8 Maximum number of vices 12 Independent motorized vices ● Maximum number of vices per zone 6 2021/04/01 w

Condition: good (used), functionality: fully functional, AXIS COURSES X AXIS (longitudinal) (mm) 7,700 Isdpfxeu Dktbs Afaehu Y AXIS (transverse) (mm) 470 Z AXIS (vertical) (mm) 420 AXIS A (spindle rotation) 0°  180° ELECTROSPINDLE Maximum power in S1 (kW) 8 Maximum speed (rpm) 24,000 Tool attachment cone HSK - 63F Automatic tool holder coupling ● Cooling with heat exchanger ● AUTOMATIC TOOL MAGAZINE ON BOARD CARRIAGE Maximum number of tools magazine 8 Maximum number of angle heads that can be inserted into the tool magazine 2 Maximum blade diameter that can be inserted in the magazine (mm) Ø = 180 FUNCTIONS. Multipiece operation ● Dynamic pendulum operation ● MACHINABLE FACES With direct tool (top face, side faces) 3 With angle unit (side faces, heads) 2 + 2 With blade tool (top face, side faces and heads) 1 + 2 + 2 TAPPING CAPACITY With compensator M8 Rigid (optional) M10 WORKPIECE CLAMPING Standard number of vices 8 Maximum number of vices 12 Independent motorized vices ● Maximum number of vices per zone 6 2021/04/01 w

Year of construction: 2010, condition: excellent (used), functionality: fully functional, SBZ 122/33 Profile Machining Center 3.8m, WK 4x90°, eluCam Description: Efficient machining of aluminum, plastic, and steel profiles Working length: 3800 mm Automatic clamp positioning Complete profile machining with stationary profile bar to protect the profile's visible surface. Latest generation CNC 3-axis control with industrial PC based on Windows XP 15" flat-screen monitor and 2 USB ports for online connectivity, barcode scanner, and label printer. Network connection: RJ 45 10/100 MBit User-friendly input via eluCam Iodpfxew Dzags Afajhu 3D visualization Rapid positioning of the machining unit (up to 60 m/min) on the X-axis thanks to robust and low-wear direct drive. High-resolution absolute encoders eliminate the need for axis referencing. Technical Data: X-axis travel: 3800 mm Max. travel speed: 60 m/min Y-axis travel: 350 mm Max. travel speed: 30 m/min Z-axis travel: 280 mm Max. travel speed: 30 m/min Max. machining length with end machining left and right: 3700 mm Positioning accuracy: +/- 0.1 mm Milling spindle speed: 1 – 24,000 rpm Milling spindle output: 7.0 kW S1 with spindle return Tool magazine for 6 tools (5 standard positions, 1 position for rotary angle head) Tool holder: HSK F63 Included Accessories: Automatic tool changer with 6 tool positions (without tools) Safety fences left and right Light barrier at the front 4 horizontal pneumatic material clamping devices Automatic clamp positioning 1 foldable material stop Central chip extraction with chip box Dosing spray device Milling spindle with integrated rotation unit for angle head Rotary angle head – 122 20 56 37 HSK-F63 for 2 tools UPS (uninterruptible power supply) Important: The profile machining center is factory-equipped with a front light barrier system as standard. Lateral protection is provided by safety fences. Any necessary rear protection must be provided on-site or ask us for a quote for safety fences. Includes: Length measurement for profile bar Additional automatic tool changer Various used tool holders and milling cutters

Condition: used, functionality: fully functional, Key Technical Specifications From official Elumatec documentation: Routing capabilities: Horizontal cutting range: With stop: 300 × 100 mm Using template: 270 × 70 mm Travel: 80 mm Vertical cutting range: With stop: 290 × 100 mm Using template: 230 × 70 mm Travel: 120 mm elumatec +1 Spindle speed: 12,000 rpm elumatec +1 Profile clamping capacity: up to 150 × 150 mm elumatec +1 Power supply: 230/400 V, 3-phase, 50 Hz Power output: 0.74 kW elumatec +1 Compressed air: 7 bar; air consumption per cycle: 12 l (no mist), 24 l (with mist) elumatec +1 Dimensions & weight: Ihsdsw Syzqjpfx Afasu Length: 940 mm Depth: 1 150 mm Height: 1 600 mm Weight: approx. 260 kg elumatec +1 Market Listing Highlights A listing from Modern Tool BC provides real-world equipment data that aligns closely with the official specs: Electrical characteristics: 240–575 V, 60 Hz, 3-phase (typical for North American markets) Motor power: 1.0 horsepower (≈0.75 kW) Spindle speed: 12,000 RPM Routing capacities: Horizontal with stop: 300 × 100 mm Horizontal with template: 270 × 70 mm Horizontal stroke: 80 mm Vertical with stop: 290 × 100 mm Vertical with template: 230 × 70 mm Vertical stroke: 120 mm Modern Tool BC Key features: Simultaneous routing in two planes without repositioning 1:1 copy ratio via stops or templates Two-handed operation for safety Two horizontal pneumatic clamps Includes air service unit, blank & keyhole templates, 8 mm & 10 mm collets, pulse spray mist coolant system, tools, and an operation manual Verify the accuracy of the information with the seller.

Condition: good (used), Year of construction: 2009, machine/vehicle number: 9155, Offer 24245 Technical data: - Pneumatic feed of the milling unit Ijdpfxstq Taks Afajhu - Work table height adjustable via handwheel - Horizontal and vertical material clamping - cutter diameter up to 300 mm - max. profile height 190 mm - max. milling depth 110 mm - max. milling length 400 mm - Angle-adjustable stop Li + Re 20 90 20 ° - milling spindle speed 2800 rpm - Drive 400 V / 2.2 kw - Compressed air connection 6 - 8 bar - Air consumption per work cycle approx. 10 l - ELGO digital display for material cross stop - Pneumatic profile clamping - Spraying device - Space requirement approx. W 1100 x H 1500 x D 700 mm - Weight approx. 300 kg

Year of construction: 2004, condition: good (used), machine/vehicle number: 2004-3-11A, - Manual feed of the milling unit - Work table height adjustable via hand wheel - horizontal and vertical material tension - Cutter diameter up to 250 mm - max milling height 150 mm Isdpfef E Higsx Afajhu - max milling depth 80 mm - max milling length 305 mm - angle adjustable stop Li + Re 20 - 90 ° - milling spindle speed 4500 rpm - Drive 400 V 3.2 kW - Compressed air supply 6 - 8 bar - Air consumption per working cycle 10 l - Pneumatic profile clamping - Table underframe - Space requirement approx. W 1100 x H 1300 x D 700 mm - Weight approx. 200 kg

Condition: repair required (used), Year of construction: 2008, machine/vehicle number: 118009950, functionality: not functional, feed length X-axis: 2,450 mm, feed length Y-axis: 350 mm, feed length Z-axis: 280 mm, spindle speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! Condition: The machine has always been maintained but now has a software error. TECHNICAL DETAILS X-axis travel: 2,450 mm Y-axis travel: 350 mm Z-axis travel: 280 mm Feed rate: 30 / 15 / 15 m/min Ihedpfx Aewu Ekqjfasu Spindle Spindle speed: 18,000 rpm Spindle power: 3 kW Working area Max. machining length: 2,400 mm Compressed air Compressed air connection: 7 bar MACHINE DETAILS Length: 3,100 mm Depth: 1,650 mm Height: 2,250 mm Weight: 1,227 kg Voltage: 400 V, 3~, 50 Hz Connected load: 8 kW

Year of construction: 2001, condition: used, Pictures to follow - machine is being overhauled Technical data: - X-axis travel: 7300mm - Y-axis travel: 1000mm - Z-axis travel: 650mm - Swivel angle A-axis: 0-90° freely programmable Ihedpet Ea Tfjfx Afasu - Swivel angle C-axis: 0-355° freely programmable - Max. Machining length without end face machining: 7300mm - Max. Machining length with end face machining: 6980mm - Tool changer with 10 places and a saw blade holder - 9 material clamps - SK30 tool holder - 2-layer machining

Year of construction: 2024, condition: new, Machining Center Rumba - Processing length 3,000 mm / 4,000 mm CNC-controlled machining center with vertical machining spindle suitable for machining extruded aluminum profiles, light metal, PVC and steel from 3 sides. Controlled tilting worktable: -90°/0°/+90° with intermediate angles. The machine is equipped with an electrospindle 4Kw, 18000 rpm, controlled by inverter and quick tool change (tool changer) with spindle ISO30. Interpolation X, Y, Z and W axes controlled by the numerical control. Brushless motors for X, Y, Z and W positioning. Complete with 4 pneumatic double clamps, tool diameter correction via software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touchscreen with simplified Windows-based graphics, TeamViewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to process longer parts. Standard equipment: 4kw electrospindle ISO30 4 pneumatic clamps (manually adjustable) safety guard automatic tool changer (10 tools) 4x ISO30 cone complete with tools 3x compartments for collecting chips air nozzle Technical specifications: X-axis travel 3,000 mm / 4,000 mm Y-axis travel 400 mm Z-axis travel 300 mm Rapid traverse (X,Y,Z): 50 m/1' Acceleration (X,Y,Z): 1.5m/s2 Electrospindle: 4Kw ISO30 / 6.6kw HSK63 (optional) Spindle cooling: air cooling Max tool length: 130mm Max. tool diameter: 140mm (saw blade) Ihodpehywz Sofx Afasu Working pressure: 7 bar Weight 2500kg It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2024, condition: new, 5-axis CNC machining center for processing aluminium, steel, light metals and PVC. Bolero 5 has a massive machine bed. The machining spindle is a 17 kW (S6) electrospindle with HKS 63F cone. The maximum speed is 24,000 rpm, controlled by a frequency converter. Bolero 5 has an automatic tool changing system with a 12-place magazine. The work area is equipped with 8 automatic positioning motorized vices controlled by the CN. The travel range of the X-axis is 7,000 mm (optional extension to a total of 9,400 mm). Pendulum machining is also available if desired (optional). It is operated via a PC Windows with a 17" color screen. The machine is equipped as standard with safety and protective devices in accordance with EC directives. Ihjdpfx Aehy S Hmsfaju It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Year of construction: 2010, condition: excellent (used), ALUMA PANTO 10 MILLING AND COPIING MACHINE MILLING AND COPIING MACHINE ALUMA PANTO 10 YEAR 2006 Ihjdepag Injpfx Afaeu MILLING AND COPIING MACHINE ALUMA PANTO 10 YEAR 2006 PANTOGRAF TWO-AXIS x AND y MILLING MACHINE FOR MILLING FOR ALUMINUM DOOR HANDLES AND HINGES

Condition: new, Year of construction: 2024, XX-11136 End milling machine FOM INDUSTIRE MISTRAL 26A Machine in stock Standard configuration: Iodehyuglopfx Afaohu - End milling angle 45° Rh, 90°, 45° Lh and intermediate angles - Milling tool unit rotation speed 7000 rpm - Max. milling tool size Ø 175 mm - Automatic feed with rapid approach controlled by milling tool unit photocell - Quick change milling tool unit - Milling tool unit balancing system - Milling units magazine with 9 slots - Spray mist blade lubrication system - Carriage stroke: X max= 350 mm - Milling depth: Y max = 65,5 mm - Maximum milling unit height: 125 mm - Working capacity: see attached diagram - Patented system that allows profile positioning without the need for goniometries - Set up for the extraction of chips and fumes - Integral safety casing around work table with opening lock - Double working pressure servo-controlled in low pressure - In set Cutter sleeve for milling units - Horizontal and vertical vices - 8-positions star-shaped length stop

Condition: new, Year of construction: 2025, XX100405 CNC Machining centre with 4 controlled axes FOM INDUSTRIE FMC 370 Machine in stock Standard configuration: - Liquid-cooled electrospindle 7 kW, 20,000 rpm (HSK-F63) - 9 location tool magazine on head (HSK-F63) - No. 2 pairs of pneumatic vices with positioning through the travelling column - No. 2 pairs of low profile jaws for clamping wide profiles - Left pneumatic reference stop - Minimum quantity lubrication (MQL) with pure oil - Chip and waste collection tank in base - Perimeter guard system with automatically opening, front retractable doors - X FLOW (automatic orientation of lubricant nozzles) - Control: POWER-D - Movable control console - 24” display - FST CAM 4 program Optional equipment installed on the machine: - PR205249 One pairs of additional vices with independent positioning and vises modification: • Transformation of four standard vices to vices with independent positioning • Transformation of standard vices into extra clamping vices - PR205258 Pendular (2 working areas, 2 pieces) and oversides profiles machining: • Second X-FLOW • Right pneumatic fixed stop • Software to manage pendular machining Ihsdpfewhrlnox Afasu • Safety devices for pendular machining • Tunnel for oversized profile machining • SW to manage oversized machining operations - PR205253 Device to measure profile length - PR205227 Device for integrity and measure of the tool - PR202971 Data import software in accordance to FOM protocol and wireless optical bar code and QR code reader - ZP715059 3D custom milling Module for FST CAM 4 - ZP715010 Module for rigid tapping and chase tapping - PR205268 Rear chip collection tanks for FMC 370 - PR205271 Centralised automatic lubrication system - PR203389 Rear chip collection tank - PR202975 Tool set A3/HSK F63 (8 holders HSKF63, 8 collets and 8 HM milling cutters) - PR204497 Holder HSKF63 with cutter Ø 200 x 6mm - PR203785 Holder HSKF63 with blade Ø 200 mm