Used brush deburring machines for sale (17)

Condition: used, Brush deburring machine, tube deburring machine BAUER type BE 1 Machine No. 29 Year of manufacture 1992 Brush diameter 250 mm Brush width 25 - 55 mm Speed 1500 / 3000 rpm Power 2.2 / 3 kW Mains connection 380 Volt, 50 Hz - Material support table Required space (L x W x H) 500 x 450 x 440 mm Bdodpfx Abjhrkrpswoa Weight 45 kg good condition

Condition: as good as new (ex-display), Year of construction: 2026, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as Bdodpfotr Aviox Abwoa outer radii on sheet metal. 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: used, Technical details: Weight: ca. 80 kg dimension machine xH: ca. 077 x 0,45 x 0,5 m Bsdpfxswiu Sme Abwoda BRUSH MACHINE *

Condition: new, AVAILABLE EX STOCK ! Subject to prior sale. Bdjdjd Ixbzepfx Abwja OD tube deburring machines clean and remove sharp edges on tubes and profiles caused by sawing. Enables simultaneous outside and inside burrs removal without rotating the tube. Deburrs round, square, rectangular and many different tube and profile shapes deburring in few seconds.

Condition: good (used), Year of construction: 1994, Speed: 1500 / 3000 rpm Bdodpfx Aoydl Akebwja Connected load: 2.4 / 3.7 kW Space requirement: approx. 1.0 x 0.5 x 1.2 m (L x W x H)

Condition: new, Year of construction: 2026, High-performance deburring machine for simultaneous internal and external deburring of profiles and pipes in a single operation (approx. 3 seconds). Powerful industrial gear three-phase motor with frequency control, allowing stepless speed adjustment: 600 – 2,700 rpm. Designed for deburring pipes and profiles with material dimensions (horizontal/vertical) up to 120 mm. Easily adjustable working table height (adjustable and lockable) to match the required material size. Adjustable, lockable feed (carriage) of the deburring brushes to the working table via hand wheel with locking function. Drawer for dust residue collection. Sheet steel housing prepared for connection to an external extraction system. Folding covers for easy brush changeover. Machine body color: RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm crimped steel wire. Power cable with CEE plug. Operating tools included. 12 months warranty for single-shift operation. Working height: 1050 mm Speed: 600 – 2700 rpm Weight: 410 kg Machine dimensions: 680 x 1200 x 1380 mm Power: 3 kW Electrical connection (V/Hz): 400/50 Brush diameter: 250 mm Standard brush width: 60 mm. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU THE FULL FLOTT PRODUCT RANGE! REQUEST AN OFFER TODAY! Bdsdpfx Aonvfl Aebwsa

Condition: new, diameter of brush Ø 250 mm width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series Bjdpfxoxaamne Abwjda - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Year of construction: 1997, condition: used, Brush deburring machine RSA RASAMAX MONO for brushes Ø 250 mm and approx. brush width 80 mm speed range 1500 / 3000 rpm operating voltage 380 volt Bdsdpfx Abeimbq Dswea total power requirement 2,0 / 3,0 kW Weight approx. 180 kg for deburring of sheet metal with contours for material thickness from approx. 1,0mm to 6,0mm. Brush speed 2-stage 1500 or 3000 rpm Machine is located in 71334 Waiblingen-Beinstein and can of course be inspected, please contact us.

Condition: excellent (used), Year of construction: 2023, Machine for grinding, deburring, edge rounding, and polishing; manually operated, mobile application. Equipped with a vacuum system and the option for 2 magnetic strips. CE certified, fitted with dual emergency stop circuits and reset system. Weight: 445 kg Dimensions: 1435x1100x1510 mm (H) Bodpfxoyipdie Abwjda Working height: 950 mm Working area: 1280x780 mm Minimum workpiece dimensions: 20x20 mm Maximum workpiece height: 120 mm Maximum workpiece width: unlimited length with a maximum width of 780 mm Maximum load on workbench: 100 kg Operation: dual-hand control For brush application: disc brush Ø150 mm with quick-change system Brush motor output: 0.75 kW, frequency-controlled Brush motor speed: 150 – 1500 rpm Support table: equipped with carpet / special non-slip support mat Workpiece fixation via integrated vacuum system (standard) Vacuum system: 2.2 kW as well as 2 magnetic strips for additional securing of steel parts Various brush configurations available, depending on material—please contact us for details!

Condition: used, Brushing machine / brush deburrer - make Lindemaier, year 1990, power consumption 7,5 kW, dimension: L:1,0 x W:0,80 x H:1,25m, weight approx. 48 kg - brush size Ø 300 x Ø 50x50mm type K 180 - engine speed 2920 rpm, suction nozzle Ø 180mm - with blow-off device Accessories: approx. 15 spare brushes NEW * Bedpju Nu Rnjfx Abwsda

Condition: used, Technical details: Bjdpeu Ng S Defx Abwjda grinding spindle speed: 1440 U/min voltage: 220 V / Hz total power requirement: 1,1 kW machine weight approx.: 75 kg space requirements of the machine approx.: L:0,4 x B:0,7 x H:1,15 m Polishing block stands on welded sectional steel base with foot plate (400x400x5mm) -wire brushes Ø 200x25mm each are mounted on the left and right -without sanding support -Protection class IP44 -Operation via ON/OFF switch *

Condition: good (used), functionality: fully functional, automatic pipe end deburring in continuous process --- Pipe length max. 600 mm Max. pipe diameter 30 mm Brush length approx. 450 mm Brush revolutions 2000 rpm Bdsdpjydfutsfx Abwsa 2 brush drive motors, 5.5 kW each

Condition: good (used), Code: 0273 Brand: LEVIGALTECNICA Model: 3R / 600 Dry burring, honing and calender machine for the superficila finishing of blank, punched, laser or plasma-cut materials presenting burrs, which because of aesthetics and/or safety reasons, must be removed Technical data: Max working width 650 mm Min workable thickness 0,5 - 1 mm Max workable thickness 150 mm Abrasive belt motor power 7,5 Hp Belt motor power 1 Hp Bench lifting motor power 0,75 Hp Automatic table positioning Height display Variable belt speed Bdodpfjx Ivycsx Abwea Vacuum table 1° Roller group diameter 100 mm 2° Roller group diameter 100 mm 3° Roller group diameter 120 mm Suction inlet diameter 120 mm Compressed air 7-8 bar Overall dimensions mm 1500 x 2700 x 2200 h

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Bdedjxpqy Rspfx Abwsa Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Good condition

Condition: good (used), Min. Pipe length: 100-1800 mm The system was previously used for deburring cut pipes! Bdodjq U Rccopfx Abwsa

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Bodpfxsw U A Dme Abwsda Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Brush Deburring Machine RE 500 Brush diameter: 250 mm Revolutions: 1500/3000 rpm Bdodpfjxzrd Ujx Abwja Operating manual