Used Milling machines - horizontal for sale (38)

Machining Center - Horizontal

Call

Condition: excellent (used), Year of construction: 2018, Operating hours: 4,172 h, machine/vehicle number: NHX51180908, Functionality: fully functional, The DMG MORI NHX5000 is one of the most established and best selling CNC Horizontal Milling machines on the market, offering highest stability, precision and dynamics. This DMG MORI NHX5000 for sale was built in 2018, comes with a comprehensive specification and in excellent condition and working order. Bdqqttiptja Please refer to our standard quotation within the documents section for the full spec and machine options. If you would like any additional information please contact us and we can provide videos and arrange a machine demonstration.

more

Listing

Butzbach

7,815 km

GROB G300

Call

Condition: used, Year of construction: 2007, machine/vehicle number: GM4185/08 Stations- Nr.: GM4185/08-01, weight of the machine ca.:11,2 t E8qnod0wg one spindle

more

Listing

Barsbüttel/Hamburg

(dealership location)

7,700 km

Milling Machine - Horizontal

MONDIALE VIKING

Call

Condition: used, x-travel:600 mm y-travel:210 mm z-travel:450 mm high speed spindle taper:SK 40 Bhrgufdsab3 spindle turning speed range:31,5 - 1000 U/min total power requirement:2,8 kW dimensions of the machine ca.:1250 x 1350 x 1600 mm weight of the machine ca.:1100 kg

more

Listing

Ölbronn-Dürrn

7,912 km

Elumatec SBZ122/53

€45,500

Entry level model with servo motor

Call

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, SBZ 122 bar machining center 3.8m, WK 4x90°, edarc 3-axis bar machining center with 3,800 mm working length for flexible and efficient machining of aluminum, plastic and thin-walled steel profiles. - Fast positioning of the machining unit with up to 60 m/min by dynamic servo drives - Modern 3-axis control - No homing of the axes required due to the use of absolute rotary encoder systems - Protection of the material surface by machining on the stationary bar. - Avoidance of collisions through automatic clamp detection and positioning - Certified, drive-integrated safety functions - STO = Safe Torque Off - SS2 = Safe Stop 2 - SLS = Safely Limited Speed - Power-Torque milling motor with closed-loop speed control for short spindle ramp-up and braking times - Energy recovery through DC link coupling of the axis drives with regeneration and buffering of the braking energy of the drives - Tapping without compensating chuck - Operator terminal with Windows operating system, large 15 " flat-screen monitor - Connections: 2 x USB, network with RJ45 10/100 Mbit - Easy and comfortable programming by eluCam on the operating terminal even during the machining process - Remote maintenance via TCP/IP if internet access is available - 1 circuit clamping system Technical data: Traversing and machining ranges: - X-axis [mm]: up to 3,850 / 3,800 - Y-axis [mm]: up to 350 / 230 - Z-axis [mm]: up to 280 / 220 Traversing speeds: - X-/Y-/Z-axis [m/min]: 60/30/30 Milling spindle: - speed [rpm]: up to 24.000 E2k8mjq - power [kW]: 7 - tool holder: HSK-F 63 Tool changing system: - 6 tool places, 5 standard and 1 deposit place for rotary angle head. - Tool length: max. 180mm (tool + holder) - Balance quality according to DIN 1940: at least G2.5 Machine equipment: - Automatic tool changer (without tools) - 4 horizontal pneumatic material clamping devices - 1 pneumatic material stop - 1 circular clamping system - Minimum quantity lubrication for the tools - Manual control unit - Central chip tray in the machine bed - Safety fence, left and right - 1 safety light barrier system at the front - Depth gauge Additional equipment: - Length measurement for profile bar for extended measuring range - Tool holder set HSK63 basic 5 chucks - Barcode scanner Radio transmission eluCam

more

Listing

Eichenzell

7,874 km

isel Germany Serie ICV

Call

Condition: new, machine/vehicle number: 280261 0001, BENEFITS: -Compact entry-level model in the field of servos -Low maintenance -Control with integrated PC controller -Compact desktop machine -Ideal for use in schools and training, as well as orthopedic milling machines and small series production SUITABLE FOR: -Milling -Drilling -Measuring -Cutting -Dispensing -Glueing -Casting -Burring -Polishing -Testing -Scanning -Scaling -Printing -Placing -Mounting Bpfpnmii -Screwing -Etc.

more

Listing

Höchstadt

7,988 km

Milling machine MAHO MH 400P

MAHO MH 400P

€1,850

ONO VAT not applicable

Call

Condition: repair required (used), Year of construction: 1986, Control: Heidenhain TNC 135 tool holder: ISO40 hydraulically clamped working range: X 400mm Y 375mm Z 250mm working table: 6grooves 14H7 distance 45mm Uy7j0eh spindle speed: 50-3150 rpm infinitely variable Special accessories: universal table rotatable and tiltable Power supply: 380Volt 50Hz (Total 5,1KvA) Known defects: quill stroke on milling head (50mm) defective Speed control defective Tool voltage defective

more

Listing

Rödermark

7,854 km

Hydr. horizontal bending machine

WMW-VEB Pressenbau PYXWM 63

Call

Condition: good (used), Year of construction: 1980, Offer 22357 Technical data: - Pressure capacity 630 KN / 63 t - pressure regulation 0 - 63 t - stroke length approx. 0 - 400 mm Bf8n8ah9w33 - max installation depth approx. 500 mm - stroke speed approx. 0 - 0,6 m/min - tool height up to approx. 350 mm - drive 380 V / 11 kW - space requirement approx. W 2000 x H 1200 x D 1300 mm - weight approx. 2000 kg - Accessories - height-adjustable lateral support rollers - straightening tool for straightening long material - straightening beam 1000 x 240 mm with - threaded spindle laterally adjustable rests

more

Listing

Délegyháza

8,629 km

milling machine

KSZB KSZB

€1,000

Call

Condition: good (used), Year of construction: 1990, Old milling machine in good condition Bgcgzwkdfwv

more

Listing

Kassel

7,801 km

PONAR horizontal milling machine

STEINEL SH 4 (X = 300 mm)

Call

Condition: used, Horizontal milling machine make STEINEL type SH 4 Make # 5690 Technical data: Table size 620 x 200 mm table longitudinal travel 300 mm spindle mounting MK 3 12 spindle speeds 63 - 1250 rpm. 12 automat. feeds 0,05 - 1,45 mm/min table feed in longitudinal direction to both sides automatic or manual Baqs8d38cqv motor power 0,7/ 1,1 kW outer dimensions 1030 x 1200 x 1370 mm used

more

Listing

Starachowice

8,452 km

JOTES 2FX

€2,200

Cost effective milling with path control

Call

Condition: good (used), Year of construction: 1986, Horizontal milling machine PONAR Type 2FX Dlswjj

more

Listing

Eichenzell

7,874 km

isel Germany AG Serie ICP4030-P

Call

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine simple operability Cyhjlfihqv 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

more

Listing

Ścinawka Średnia

8,250 km

Boring machine CWCa-80

DFO CWCa-80

€4,900

Call

Condition: ready for operation (used), Machine in working order connected. Dlp2ieoqh

more

Listing

Rödermark

7,854 km

WANDERER 1 G-U

Call

Condition: good (used), Year of construction: 1966, machine/vehicle number: 36127, Offer 21537 Technical data: - Table size approx. 1100 x 260 mm - Working range of axes - X (longitudinal) approx. 815 mm - Y ( transverse ) approx. 400 mm - Z (vertical) approx. 410 mm - milling unit tiltable + inclinable + rotatable - horiz. Shifting path of the milling unit 410 mm - table can be tilted 45° to both sides - max. distance milling spindle - table surface 500 mm - tool holder ISO 98txn3x - quill stroke mm - working spindle speed adjustable in steps 67 - 1400 rpm - Mot table feeds X ; Y ; Z - drive 400 V / 4,5 kW - Space requirement approx. W 1900 x H 1900 x D 1900 mm - Weight approx. 3200 kg

more

Listing

Kreis Bergstraße, Deutschland

7,863 km

Milling Machine

RECKERMANN FU 1000

Call

Condition: good (used), Nr. 3405: 1 used Horizontal Milling Machine Kr8ld Fabr. RECKERMANN Typ FU 1000 Bauj. ca. 1975 Table Surface 1200 x 250 Workrange: 900 x 340 x 380 mm, Spindle SK 40 Speedrange 30-1500 min-1 Feed Rate 4 / 11 bis 230 / 570 mm/min Weight ca. 1700 kg More Details find in enclosed PDF

more

Listing

Kassel

7,801 km

CNC MACHINING 3 AXIS UGV DATRON M8 CUBE

IBERIMEX (CME) F 900 (X=400 mm)

Call

Condition: used, Year of construction: 1975, Horizontal milling machine make IBERIMEX (CME) type F 900 machine # 75128, year of manufacture 1975 Technical data: Edc9uldh9l Table longitudinal travel X 400 mm table cross travel Y 80 mm table vertical travel Z 300 mm table size 500 x 140 mm Spindle mounting ISA 30 12 spindle speeds 80 - 2000 rpm. drive power 1,5 PS weight 420 kg outer dimensions 800 x 900 x 1400 mm used, in good condition

more

Listing

Romorantin-Lanthenay

7,579 km

DATRON M8 CUBE

€110,000

Call

Condition: like new (used), Year of construction: 2019, DATRON M8cube => Only 1500 hours of work Polymer concrete table with front cut-out for vertical clamping, approx. 250 mm x 600 mm up to a height of 900 mm. This cut-out offers the option of integrating a rotary/tilt table or vertical clamping. Usable travels: 1,020 mm x 830 mm (x, y), reduced to 720 mm in Y with 2 tool magazines - Feed speed 22 m/min. Full cab, swarf tray on wheels Simple, ergonomic opening for improved accessibility Polymer concrete table on welded steel frame Gantry with double Y-drive Driven by ballscrews and servomotors Z-stroke: 245 mm Clearance under beam: 200 mm Overall dimensions (excluding control terminal):1740 mm x1740 mmx 1950mm (Machine) Weight: approx. 1.500 kg Includes the following software: - DATRON next option: Protected areas - DATRON next option: Z-shape tracking - DATRON next: multiple execution - DATRON next: sister tool management B10-2 HSCpro remote control - ergonomic and intuitive Dust-proof, with shortcuts to 19 key functions - 6 customizable shortcut keys - Precise manual positioning with a choice of increments to 0.1/0.01/0.001mm - Lubricant selection and quantity control - emergency stop button Bgsdwes8 - Confirmation button for work in degraded mode Camera for DATRON next software and associated functions (MxCube) 3.0 kW HF spindle with HSK-E 25 tool holder => 1500 hours of work Type PowerS Synchro 3kW spindle for MxCube. Synchronous spindle Continuous power: 3.0 kW Max. speed 40,000 rpm Torque: 0.95 Nm at 1,000 rpm Tool holder: HSK-E 25 clamping cone Prepared for automatic tool change Cooling unit included Micro-lubrication 2 tanks of 5 liters with level switch. Automatic alert on control unit if lubricant level is too low. Possibility of using different lubricants. With funnel and capillary tube. 4-nozzle spray unit Spray system comprising four adjustable nozzles, each arranged at 90° around the milling machine. Allows optimum distribution of lubricant, which always reaches the cutting edge regardless of the milling direction. 2 12-position tool magazines, HSK-E 25 Max. usable tool length 75 mm - tool diameters up to 20 mm Z-Nano tool sensor for M8cube IP68 protection; repeatability ± 0.5 μm Magnetic coupling, Z-height sensor for MxCube Measuring time for 10 measuring points approx. 10 s XYZ sensor complete with swivel arm, operating software, installation Accessories: 3-D extension (X, Y), additional probes 2x vacuum distributor, Oil vapour extraction unit Integrated fire extinguishing system

more

Listing

Weiterstadt

7,845 km

Boring machine Juaristi MDR 75

Huron MUVR 6

Call

Condition: good (used), Year of construction: 1973, Longitudinal stroke of the table: 1470 mm Transverse stroke: 665 mm Vertical stroke: 520 mm surface of the table: 2000x460 mm Cohvjv00rb spindle cone: SA 40 Number of grooves: 5 Number of spindle speeds 27 spindle speed: 30 to 2066 rpm Number of longitudinal and transversal feeders: 27 Automatic longitudinal and transverse feed: 1.6 to 820 mm / min Number of vertical advances: 27 Automatic vertical feed: 0.8 to 410 mm / min Fast forward X and Y: 2800 mm / min Fast forward Z: 1400 mm / min Motor: 12 kw Motor feed: 3,5 hp Weight: 4200 kg Overall dimensions: 2335x2462x1740 mm

more

Listing

Balaguer

7,846 km

Juaristi MDR 75

Call

Condition: good (used), used boring machine Brand: Juaristi Model: MDR 75 Weight: 5600kg Motor power: 10KW 2-axis digital FAGOR. Shank diameter: 75mm Longitudinal course (X axis): 1,150mm Vertical course (Y axis): 700mm Column transversal course (Axis W): 800mm Cane exit course (Z axis): 500mm Table surface: 900x700mm Speeds: 22-1055rpm Number of advances: 9 of 0.04-3 mm/rev. Cbychyfiwz

more

Listing

Pfungstadt

7,851 km

Hermle H6/2K

Call

Condition: good (used), Year of construction: 1970, Article number: MA1064 Manufacturer: Hermle Type: H6 / 2 K Year: Circa 1970 Machine number: 3211 Length [mm]: 900 Njqvz Width [mm]: 700 Height [mm]: 1500 Weight [kg]: 560 Power supply: 380 V Gear [RPM]: 900-10000 Lxw table size: 520 X 175 Left/right rotation: Yes

more

Listing

Louvigné-du-Désert

7,329 km

milling machine

Vernier

€3,000

Call

Condition: not inspected (used), VERNIER milling machine Bgzifvde Capacities : length 950 width 350 height 450

more

Listing

Kassel

7,801 km

horizontal milling machine

RUMAG REG 5 (X= 350 mm)

Call

Condition: used, Year of construction: 1975, Horizontal milling machine make RUMAG type REG 5 Machine. # 383 Comm. # 34280 Year of construction 1975 Technical data: Table size 700 x 200 mm travel X-axis 350 mm travel Y-axis 170 mm travel Z-axis 250 mm Spindle mount MK 3 18 spindle speeds 71-2800 rpm. 9 automat. table feeds 16-500 mm/min drive power 2,0 kW Baqsyrc3toz outer dimensions approx. 1200 x 1200 x 1600 mm weight approx. 800 kg with - cooling device - table longitudinal feed - vertical and transverse movement manual - counterholder - hor. milling arbor used, in good condition

more

Listing

Hövelhof

7,729 km

Ludwig Loewe FW 4

Call

Condition: good (used), Offered here is a horizontal milling machine of the company Ludwig Loewe type FW 4. Technical data: Manufacturer: Ludwig Loewe Type: FW4 Tool holder: SK 40 clamping surface: 800x 300mm traverse path X-axis: 700mm travel Z-axis: 250mm small feed: 8mm/min rough feed: 630mm /min gr. speed: 1120 rpm small speed: 35 rpm weight: 0,8t Bzdaqqtikl

more

Listing

Weiterstadt

7,845 km

Horizontal boring machine AYCE AC-100 K4

Fritz Heckert FUW 315 II

Call

Condition: used, Year of construction: 1986, DESCRIPTION Universal tool milling machine FUW 315 /III - Manufacturer: VEB Uhrenkombinat Kombinat Fritz Heckert - Model/Type: FUW 315/III - electrical connection: 3 380V 50Hz 27,2A - electrical power consumption: 7,8 kW - travel in X-axis approx. 500 mm - travel in Y-axis approx. 520 mm - travel in Z-axis approx. 440 mm - working table clamping surface 315 x 1000 mm - table load 150 kg Incl. accessories and collet chuck - Tool holder 2 spindles: ISO 40 Bv00ydvvyd

more

Listing

Balaguer

7,846 km

AYCE AC-100 K4

Call

Condition: excellent (used), Year of construction: 1998, Used cnc horizontal milling boring machine Brand: AYCE Model: AC100-k4 N20rfonh Serial number: 740 Year: 1998 Power: 16kw Weight: 12,700kg AC100-K4 MODEL WITH CONTINUOUS ADVANCE VARIATION Numerical control: Heidenhain TNC124 with 4 axes (X, Y, Z, B) Number of bench supports: 4 (K4) OPTIONALS: - Cnc Heidenhain - Automatic positioning of the table rotation 4 x 90º. - Vertical course 1200mm (Instead of 1000mm that the standard model has) - Refrigeration equipment - Face plate and clamping arm - Universal vertical apparatus, Huron type with hydraulic tool clamping - Rest for vertical course of 1200mm - Table rotation display 4th AXIS (B) Principal axis: - Shaft diameter: 100mm - Inner cone: ISO 50 with quick tool clamping (Instead of Morse 5) - Drill mounting diameter: 171.45mm - Horizontal course of the main axis: 700mm - Vertical course of the main axis: 1200mm - Number of turning speeds: 18 - Speed range: 12-1200 rpm - Maximum distance between plate and steady rest: 2250mm Advances: - Number of work advances in all directions: INFINITE - Min/max value of work progress: 2 - 1500 mm/min. - Rapid advances in carriages and head: 3000 mm/min. - Rapid advance main axis: 1500 mm/min. - Rapid table rotation advance: 600 degrees/min. Rotary table: - Turntable dimensions: 1100x1200mm - Table longitudinal course without steady rest: 1500mm - Curos longitudinal table with lunette: 1200mm - Cross course: 1700mm - Distance between axis/maximum table center without steady rest: 1975mm - Distance between axis/maximum table center with steady rest: 1600mm Automatic centralized greasing. Hardened and rectified guide. Telescopic guide protectors. Ball screws in the 3 axes. Automatic hydraulic locks in all movements.

more

Listing

Morbach

7,763 km

BF 700

Holzmann BF 700

€12,000

metal fiber production line

Call

Condition: like new (used), Year of construction: 2017, Milling machine from a workshop liquidation. Condition as in the photos. Sqyy9

more

Listing

Đakovo

(dealership location)

8,738 km

Call

Condition: ready for operation (used), CARACTERISTIC MACHINES MACHINE DATA FVH130-2 1-1 DIMENSIONS OF THE BRAMS - Thickness: 150-200 250 300 - Width: 450 min. up to 900 max. Length: 7250 max. 1-2 CUTTING TOOL -e 280mm; consisting of 20 discs, thickness 31.5 - cutting length 630, weight: 350 kg - speed: 140 to 400 rpm 1-3 WORKING SPEED Z AXIS - adjustable from 1 to 7.5 m / min, Arbitshub: 920 max. 1-4 X-AXIS WORKING DEPTH - Adjustable from 0.25 to 2 mm - for the return of the carriage: 3m / min. 1-5 POWER -110 kW at 140 RPM - 130 kW at 205 RPM (see enclosed power curve) 1-6 PRESENTING POWER SOURCES Current: - Voltage: 3x380 V + Earth - Total power: 230KVA - Minimum cross section 3x185mm2 or 6x70mm2 - Protective earth 95mm2 - Microinterruptions ᐸ 10ms - earth ᐸ3 ohms compressed air: supply pressure 5 bar 1-7 WEIGHT OF THE MACHINE 40 tons + (2x 13 tons max.the slabs) Jx0mem

more

Listing

Kassel

7,801 km

Universal milling machine

STANKO 675 M (X 320 mm)

Call

Condition: used, Year of construction: 1972, Universal milling machine make STANKO type 675 M Make # 1727 Year of construction 1972 Technical data: Table longitudinal travel X 320 mm upper arm cross travel Y 200 mm table vertical travel Z 300 mm Spindle mounting MK 4 16 spindle speeds 50 - 1600 rpm. 16 feeds X, Y and Z 12.5 - 400 mm/min rapid traverse X, Y and Z 935 mm/min vertical clamping surface 500 x 200 mm angular table clamping surface 630 x 200 mm drive power 1,5 kW dimensions L x W x H approx. 1000 x 1200 x 1700 mm weight approx. 770 kg with - rapid traverse - cooling device - different tool holders Baqsu32sbvs ATTENTION: without vertical milling head!!! used, in good condition

more

Listing

Hövelhof

7,729 km

Double column horizontal milling machine

Reichle & Knoedler FR.4.100x350x3000

Call

Condition: not inspected (used), Year of construction: 1985, Offered here is a two-column horizontal milling machine from the company Reichle & Knödler. Data: Manufacturer: Reichle & Knödler Type: FR.4.100x350x3000 Ucvi8dgn Year of manufacture: 1985   Control: Siemens Sinumerik Primo S   travel X-axis: 3000mm  traverse path Y-axis: 1000mm travel Z-axis: 1000mm weight: 18t  dimension: 9200 x 3200 x 2750 Drive power (spindle): 30kW spindle: 1 piece steep taper: 60 clamping surface: 3000 x 710mm accessories: Control cabinet Coolant tank 7 milling shafts Note: It is possible to work only with milling shaft

more

Listing

Sonneberg

7,964 km

WMW HECKERT FW 200x630/III

€1,200

Call

Condition: good (used), Year of construction: 1980, machine number: 001524 Bi30pplskj Type / Model: FW 200x630/III Travel x-y-z: 380 - 140 - 230 mm Table: 630 x 200 mm Speed range: 67 to 1,500 rpm spindle mount: SK 30 Feed rates: 10 to 125 mm/min Rapid traverse: 2,100 mm/min Connection: 2,1 kW Accessories/equipment: condition: good Weight: 1 t Dimensions: 1.000 x 700 x 1.500 mm

more

Listing

Hollenbach

8,082 km

DMC60H

Deckel Maho DMC60H

Call

Condition: good (used), Year of construction: 1997, Operating hours: 41,049 h, machine/vehicle number: 28830003132, Installation dimensions length x width 4,75 x 4,97 m spindle speed 15000 rpm spindle cone SK40 Drive power milling spindle 15kW Operating hours milling spindle total 41049 8rld39a8wc (hour counter defective since 07.2020) Milling spindle installed 05.2022 pallet size 400x500 Interference circle Ø max 790 pallet max 1000 kg set-up station 1 transfer place 1 Machine weight approx 10 to.

more

Listing

Mappano

8,094 km

CNC milling machine with moving table

Zayer 30KF 3000

Call

Condition: used, Year of construction: 1997, Weight 25000kg SELCA S3045 control Table surface 3000X1000 mm Spindle speed 35-3000 min Maximum permissible weight on the table 10000 kg Hvqmrep Motor power 37 kW X axis travel 2708 mm Y-axis travel 1513 mm Z axis travel 1259 mm advance Rapids 15000 mm/min DIN 2080 spindle attachment Two position automatic head Machine complete with user manual. All the technical data shown are indicative and can be modified without notice and therefore they must not be considered binding

more

Listing

Oświęcim

8,431 km

Fratelli Rivolta F.B.F. 2000

Call

Condition: good (used), Year of construction: 1989, Machine Type: RIVOLTA F.B.F. 2000 Year of Manufacture: 1989 NC Type: CNC SELCA 3045 Heads Quantity: N° 1 Head Type: CONIC HEAD ISO 50 Chudnadevb Spindle Features: ISO 50 / 2000 RPM / 22 KW (110A) Axis Fast Speed: 8 m/min. Max Axis Strokes: X 1.800mm ; Y 950mm ; Z 600mm Table Size: 2000 x 1000 mm Painting: LIGHT GREY (RAL 7035) / BLUE (RAL 5012) Max. Dimensions Size: 6.500 x 5.250 x 2700 mm Approximate total weight: 14.000 Kg

more

Listing

Kassel

7,801 km

Small horizontal milling machine

RUMAG RFO (X=350 mm)

Call

Condition: used, Year of construction: 1968, Small horizontal milling machine make RUMAG type RFO Machine. # 667 Year of manufacture 1968 Technical data: Table longitudinal travel = X approx. 350 mm table cross travel = Y approx. 80 mm table vertical travel = Z 170 mm Edc0brby7p table size 400 x 110 mm Spindle mounting MK 2 12 spindle speeds 400-4000 rpm. Drive power 0,37 / 0,55 kW dimensions L x W x H 800 x 550 x 1350 mm with - manual feed longitudinal and vertical - underframe - cooling device used, in good condition

more

Listing

Vácegres

8,615 km

TOS (Cz) FU 20

€2,800

Call

Condition: good (used), Table Size 1370 x 300mm Bqznb8dsk7

more

Listing

Sonneberg

7,964 km

WMW AUERBACH F 315

€3,200

CNC milling machine with moving table

Call

Condition: good (used), Machine number: 2082 Type / Model: F315 Control: conventional travel x-y-z: 820 x 300 x 440 mm table: 1250 x 335 mm table clamping area: 1100 x 225 mm speed range: 56 to 2800 rpm spindle mounting: SK 40 Feed rate: 10 to 630 m/min rapid traverse: Connection: 6 kW Cbsicsf9ce Accessories/equipment: Condition: good weight: 2 t dimensions: 1700 x 2000 x 1900 mm

more

Listing

Oświęcim

8,431 km

Rambaudi RX1250 VM65

Call

Condition: good (used), Year of construction: 1993, Machine Type: RAMBAUDI RX1250 VM65 Year of Manufacture: 1993 NC Type: CNC FIDIA NC12R Heads Quantity: N° 1 Head Type: CONIC HEAD ISO 50 First Spindle Features: ISO 50 / 2000 RPM / 23 KW (135A) Axis Fast Speed: 8 m/min. Max Axis Strokes: X 3.000mm ; Y 900mm ; Z 1.700mm Table Size: 3.500 x 1.250 mm H80lhsnxo Painting: LIGHT GREY (RAL 7035) / BLUE (RAL 5012) Max. Dimensions Size: 9000 x 6500 x 4200 mm Approximate total weight: 24.500Kg

more

Listing

Staufenberg

7,810 km