Used Milling machines - univ.conv. 0-399mm X-axis travel for sale (62)

Year of construction: 2017, Condition: excellent (used), Tool holder: SK40 Travel X/Y/Z: 310 / 170 / 340 mm Speed range: Ccdrc3Qp7X Horizontal (16) 40 - 2000 1/min Vertical (16) 50 - 2500 1/min Spindle stroke: 60 mm feeds: 9 - 450 mm/min Table size: 600 x 210 mm throat: 133 - 320 mm motor power: 1,6 / 2,9 kW connection: 400 V, 16 A weight approx.: 860 kg dimensions approx.: 1150 x 1150 x 1680 mm head swivels: 90° / 90 Equipment: - 3-axis digital display, brand: Elesta - coolant base with pump - machine lamp - emergency stop pushbutton - Drilling quill - Modernization 2017 - Operating manual - Electr. documentation

Condition: good (used), Functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Dpsnv2 Space requirement approx. TBH 1200x1100x1600 mm

Condition: ready for operation (used), Machine/vehicle number: 5722, table mounting size: 190 x 710 mm table movement x: 390/360 mm table movement y: 150 mm table movement z: 280 mm spindle taper: SK 40 Mu00N8 spindle turning speed range: 100 - 3100 rpm carriages longitudinal: 0 - 600 mm/min electrical connection: 380 V, ca. 1,5 kW space needed: 1400 x 1200 x 1500 mm weight: ca. 680 kg

Condition: new, Universal milling machine Make: OPTimill Model: MT 60 Item no.: 3336090 Condition: New machine Travels: - X-axis 750 mm - Y-axis 230 mm - Z-axis 360 mm Bwlagjfzal equipped as standard with - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - B 18 drill chuck holder - Gear rim drill chuck 3-16 mm / B 18 - Reducing sleeve MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - T-nuts - Coolant device - LED lamp - Operating tool - Operating instructions

Condition: used, Year of construction: 2004, gebraucht 2004 4540 prompt, Zwischenverkauf v Österreich 23700 € 19900 € 1 63 - 3150 (18) U/min 700 x 500 x 500 mm 900 x 500 mm 6.6 kW 2150 mm 2220 mm 2120 mm 2550 kg 500 kg 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE Cy220Qrrx0 COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Condition: used, Year of construction: 1986, x-travel 700 mm y-travel 500 mm z-travel 500 mm Control CNC 432 total power requirement 10 kW weight of the machine ca. 4 t dimensions of the machine ca. 3 x 3 x 2,6 m No. 0052 Universal tool milling machine MAHO MH 700 C Working area: 700 x 500 x 450 Drive: 10 kW Control: Philips CNC-432 Fixed table Fully protected cabin with 3 sliding doors Cnzwsbvuna Tool holder: ISO-40. Speeds: 20-3150 min-1 Feed rate: 1-3000 mm/min, rapid traverse 6 m/min

Condition: used, Year of construction: 2012, x-travel 400 mm y-travel 300 mm z-travel 355 mm turning speeds 40-2000 U/min table surface area 320 x 750 mm stroke of quill vertical 80 mm tool taper SK 40 feed stepless 40-2000 mm/min pivoting angle +/-45° Grad rapid traverse 1500 mm/min total power requirement 2,2 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 1215 x 1200 x 1800 mm Conventional tool milling machine Wagner FCA 400, year of manufacture 2012 good condition, from educational institution Two machines built in 2012 & 2011 are available. with 3-axis digital display, feed and rapid traverse in x, y, z Manual is complete (German language). Technical Data Table clamping surface, mm 750x320 Number of T-slots 5 T-slot width, mm 14 T-slot spacing, mm 63 Distance Spindle nose table, mm 50-410 Distance Spindle centre stand, mm 140-450 Swivelling range of the milling head +/- 90° Cnzqbn8S00 Horizontal spindle holder DIN 2080 ISO 40 Horizontal spindle: Number/speeds, min-1 40/18 - 2000 Distance spindle centre table, mm 85-455 Feed rates in X-Y-Z axis/number, mm 12/10 - 380 Rapid traverse X and Z-axis, mm/min 1500

Condition: good (used), Year of construction: 1996, x-travel: 380 mm y-travel: 140 mm quill stroke: 40 mm table-size: 630 x 150 mm Cjabfzhq2A spindle taper MT: 2 voltage: 380/400 V

Condition: good (used), Year of construction: 1964, Machine is in good condition! Tool holder: SK 40 travels X/Y/Z: 500 / 200 / 400 mm Cfpzkjwazy speed range: (18 steps) 40 - 2000 rpm spindle stroke vertical: 60 mm spindle stroke horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 300 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg space requirement LxWxH, approx.: 1200 x 1250 x 1670 mm head swivels: 90° / 90 Equipment: - 3-axis digital display - Coolant device We would be pleased to demonstrate the machine under power on site. All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Condition: New machine Travels: - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: Bc207Itq - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions

Condition: used, Year of construction: 1986, gebraucht 1986 4545 prompt, Zwischenverkauf v Österreich 8400 € 1 80 - 2200 (8) U/min DIN2078 ISO30 (Anzugsschr 300 x 200 x 350 mm 600 x 200 mm Dpr2Ip 1250 mm 1350 mm 1550 mm 450 kg 1200 mm/min. 45 mm 1600 Nm 1,1/1,4 kW 600 x 200 mm 20 - 370 mm 84 - 434 mm 20 - 200 mm/min coolant equipment machine lamp 11 Pc. Milling arbors machine feet Swivelling vertical milling head (+/- 90°) with extendable spindle sleeve Horziontal milling spindle User Manual in German DOES NOT COMPLY WITH GERMAN UVV & AUSTRIAN AMVO

Condition: used, TECHNICAL DETAILS - Strokes : 320 x 150 x 375 [mm] - Distance between vertical spindle-table surface : 310 [mm] - Distance between horizontal spindle-table surface : 410 [mm] - Spindle speeds (continuous adjustment) : 58-2000 [Rpm] - Spindle taper : 30 ISO - Feeds : 12-400 [mm/min] - Fast feed up : 1200 [mm/min] - Supply : 3 x 380 [V/50 Hz] - Motor power : 1.5 [kW] - Total installed power : 2.1 [kW] Dprz02 - Machine floor space : 1500 x 1100 x 1600 [mm] - Machine weight : approx. 700 [kg] EQUIPMENT - Revolving vice - Irrigation system

Condition: good (used), Functionality: fully functional, Tool milling machine UNIMAC FM1 Year of manufacture: unknown Good general condition LxWxH: 1100x1200x1900mm Weight: 750kg X-axis: 300 mm Y-axis: 200 mm Z-axis: 350 mm 17 automatic feeds in X and Z axis 10/13/15/20/21/23/26/30/31/42/44/46/62/92/104/144/208 mm/min 12 speeds: 63/100/125/150/200/250/300/400/500/600/800/1200rpm Dpm2Ab Accessories: - Various tool holders - Various milling cutters -Vice - Various tension wrenches - Tilting swivel table

Condition: good (used), Milling machine from the manufacturer Macmon type M100-C Machine has been maintained and serviced regularly. Fully functional. Including operating instructions. Comparable in size to a Deckel FP1/2 milling machine. Various accessories: Hydraulic machine vice with turntable. Various milling cutter holders incl. milling cutters. (see pictures) Dpsbs9

Condition: excellent (used), Machine is in very good condition! Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm spindle stroke vertical: 60 mm spindle stroke horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg space requirement LxWxH, approx.: 1200 x 1250 x 1670 mm head swivels: 90° / 90 Equipment: - Heidenhain ND750 position display with Heidenhain glass scales - Coolant device Cd3Rlc3E87 We would be pleased to demonstrate the machine under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. Dplvht The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine dealer with own stock of 1600 m².

Condition: new, Year of construction: 2023, neu 2023 4546 prompt, Zwischenverkauf v Taiwan 40900 € 36800 € 747.04 € 1 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes Cy2Dtvaqpw manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts tool box with tools operating manual in English or German according to CE rules

Condition: new, x-travel 300 mm y-travel 200 mm z-travel 350 mm table-size 700 x 200 mm spindle taper ISO 40 turning speed range - horizontal 150 - 1660 U/min turning speed range - vertical 110 - 1230 U/min quill stroke 120 mm spindle drive 3,0 kW weight of the machine ca. 1,15 t dimensions of the machine ca. 1,31 x 1,38 x 1,65 m Y3Aiml

Condition: excellent (used), Tool Milling machine Maho MH 300 M Lacquer original Travels : X 300 Y 200 Z 350 Speeds : 40 - 2000 Feed X and Z stepless + rapid traverse Table . 240 x 560 Head with drilling quill can be swiveled and swiveled away for horizontal milling . Tool holder SK 40 Emergency stop , central lubrication , spindle brake , coolant device documentation complete . Accessories : vice 120 new , 10 holders , various milling cutters see pictures . Dpn2Ax Machine can be purchased with or without accessories . Condition: very good , guides impeccable without any run-in marks , absolutely smooth running at all speeds and feeds . Machine can be purchased with or without accessories . Price without net 4200.- and with 4800.- Dimensions : H 1,55m D 1,2m W 1,05m Weight 600 kg can of course be inspected under power . Free loading D - 88433 Schemmerhofen .

Condition: good (used), Technical data for type UW 10 . Mounting ISO 40 Quill stroke 60 mm Table surface 600 x 250 mm Speeds 45 - 1950 rpm Feed rates 10 - 470 mm/min...infinitely variable...adjustable... . Travel with feed approx. : Buk9D0Tca3 Longitudinal travel (X) 315 mm Transverse travel (Y) 180 mm Vertical travel (Z) 320 mm . .

Condition: used, Year of construction: 1972, x-travel 300 mm y-travel 350 mm Btsqz3Ff0M z-travel 150 mm total power requirement 2,5 kW weight of the machine ca. 700 kg dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital readout K&C New and 3-axis stepless feed Super CONDITION Technical data: >> Year of construction 1983 Machine no. 2102-2444 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: R9Rwxtyw0V >> 3-axis digital indicator K+C Newly assembled with manufacturer's warranty and operating instructions. Display unit: Reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, hole rows, radius milling functions, etc. >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1983 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The new digital display from K&C makes work easier and even more precise. Take the opportunity to inspect and try out this little gem under power on site.

Condition: used, Year of construction: 1986, Machine/vehicle number: 16878, x-travel:560 mm y-travel:500 mm z-travel:450 mm Bjeqat7Rh0

Condition: excellent (used), From Swabia for model makers + professional hobbyists a beautiful machine with reasonable travels and with swivel and tilting table, 400 V, connected load 2.2 kW Travels: in X 280 mm in Y 170 mm in Z 250 mm Mounting ISO 30. Table surface 680 x 180 mm Dimensions, W x D X H: 1 x 0.8 x 1.5 m E2Oxlaa Weight approx. 0.7 to . Equipment : - Universal swivel and tilting table - 2 speed rows, infinitely variable adjustment, 150 - 2000 rpm - Infinitely variable feed in X-axis, 15 - 250 mm/min - Coolant device - Clockwise and counterclockwise rotation

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Technical data: >> Year of construction 1990 Machine no. 2102-5040 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 Gojs3G >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.