Used Pegas Gonda 360X600 Horizontal X for sale (52,543)

Condition: good (used), Year of construction: 2003, In good technical condition and fully functional. Bwjbujwc N Shj S U U Djl Year of manufacture: 2003 Manufacturer. Machine weight: 48,580 kg Machine dimensions: Length: 8,070 mm Width: 5,490 mm Height: 3,930 mm Ground clearance: 980 mm Table length: 3,000 mm Table travel: 6,000 mm Saw blade speed (infinitely adjustable): 10 - 60 m/min Machine power: 14 kW Vertical and horizontal cutting.

Condition: good (used), Year of construction: 2003, Functionality: fully functional, I am selling this band saw. Specially designed for cutting castings. Table with large load capacity. Machine connected at customer's place in Ostrava, Czech Republic, can be tested. Complete documentation. The advantage of this saw is the possibility to cut in both vertical and horizontal direction. Video of the machine can be sent via whatsapp. Bsbot Nfwdsu S U U Djwl

Condition: used, Year of construction: 1999, Main saw motors 18 kW each Scoring saw motors 2.2 kW each Collet opening: 130 mm Saw feed forward 5 - 125 m/min Saw feed return constant 125 m/min Cutting length rip saw: 2500 mm Cutting length cross saw: 1600 mm Collets rip saw: 4 Collets cross saw: 7 Stack height of lifting table when installed at floor level: max. 680 mm Lifting table 2500 x 1600, payload 7 tons Cross saw output 2 air cushion tables 2160 x 650 mm Intermediate table for thin panels 25/16 Main saw blade HM 450 x 4.8 x 60 Scoring saw blade HM 180 x 4.8-5.8 x 45 "Power-Loc" quick-clamping device for HS "Power-Loc" quick-clamping device for VS Bjbu Ssvvkqao U U Dowl Storage location: Customer

Year of construction: 2008, Condition: used, Numeric Control Power control CADmatic software PICA 108 labeler with labeler software Working dimensions 4300 x 2200 mm Automatic rear loading with lifting table (mm) 4300 x 2200 Max blade projection (mm) 95 No. 7 grippers on the pusher carriage Fork system for laminate panels mounted on clamps Thin panel loading system Retractable lateral aligner mounted on the blade carriage Scoring unit (max blade diameter / power) 180 / 2.2 kW Bwsbu Serzhfwe U U Djl Main blade unit (max blade diameter / power) 380 / Kw 18 Adjustable speed of the blade carriage (m/min) 1 - 150 N. 4 front air curtain benches TECHNICAL DETAILS TO BE CHECKED

Condition: ready for operation (used), nominal power (apparent): 45 kVA, controller manufacturer: Fanuc Series 18i-MB, total length: 11,000 mm, net weight: 24,000 kg, total depth: 6,000 mm, Type: MCH-800 Distance of spindle end to table center: 300 1300 mm Distance of spindle center to table surface: 50 1050 mm Max workpiece dimensions: 1400 x 1200 mm cooling through spindle Bsbuev Sfqgs S U U Dowl X-axes: 1350 mm Y-axes: 1000 mm Z-axes: 1000 mm Table dimensions: (5x) 800 x 800 mm (continuous indexing) Max weight on the table: 2 ton Admission in spindle (ISO): ISO-50 Power on the spindle: 18,5 kW Toolstore: yes Tools: 90 positions Frequency: 1 > 6000 rpm (option!!)

Year of construction: 1989, Condition: ready for operation (used), General Data Machine weight 5700 kg Control Unit Brand MAZATROL Model T32-2 Additional Equipment Accessories: Various holding types for inside and outside processing, Kitagawa, Food B 12 (Ø 300), chip conveyor, documentation. This Mazak QT 35 N x 1000 was manufactured in 1989. It is a horizontal turning machine, ideal for precision machining tasks. Contact us for more information. Application Types Bwobu S U Uswfurfo Del Turning

Condition: good (used), Year of construction: 2007, Gurutzpe CNC Lathe Model A1200 4G x 5000 with Fanuc 21i-T control MACHINE CONSTRUCTION & INCLUDED FEATURES • Heavy One Piece Cast Iron Bed Construction • Heavy Duty Hardened & Ground Solid Slideways • Geared Headstock With 2 Step Automatic Barrufaldi Gear Change • Heavy Duty Tailstock and Three Point Steady • Turn Past SMW Hydraulic Steady • Longitudinal Chip Conveyor • Sauter Heavy Duty 4 Station Turret • 4 Jaw Manual Chuck 700mm Diameter MACHINE CAPACITIES Swing Over The Bed - Ø 1200 MM Swing Over The Carriage - Ø 950 MM Maximum Turning Length - 5,000 MM Distance Between Centres - 5,000 MM Load Capacity Between Centres - 5,000 KGS SPINDLE Spindle Bore - Ø 150 MM Spindle Nose - A1-11” Spindle Speed - 0 ~ 1,600 RPM Spindle Speed Range - AUTO 2 STEP CARRIAGE Type Of Tool Post - Heavy duty Automatic indexing 4 stations Tool Size - 32 MM² X-Axis Travel (Cross) - 530 MM Z-Axis Travel (Longitudinal) - 5,000 MM X-Axis Rapid Traverse - 8 M / MIN Z-Axis Traverse - 6 M / MIN TAILSTOCK Tailstock Quill Diameter - Ø 180 MM Maximum Quill Travel - 250 MM BED Bed Width - 630 MM Bed Length - 6,715 MM MOTOR Spindle Motor (30 Min/Cont.) - AC 37/45 KW Total connected power - 69 KW Bsbsu Dakpeu S U U Djwl SIZE AND WEIGHT Length (Excluding Conveyor) - 10,030 MM Width - 3,100 MM Height - 2,250 MM Weight - 20,000 KGS

Condition: used, Year of construction: 1992, max. wheel diameter 160 mm gear width 710 mm max. module 4,5 min. module 0,5 milling spindle speeds (infinitely variable) 70 - 400 U/min centre distance 800 mm total power requirement 11 kW weight of the machine ca. 4,7 t dimensions of the machine ca. 3,6 x 3,0 x 2,0 m Bobevz Edrou S U U Dswl 2-cut-cycle, shifting, very nice condition. Change gears, arbors.

Condition: as good as new (ex-display), The TDM S series is a modern version of the classic universal lathe. It features a large work area, manually shifted spindle drive, and a feed system with rapid feed and feed stop. A wide selection of included standard equipment and many possible options make this machine very versatile and productive. A modern position indicator is included. The models in this series feature premium components and carefully machined surfaces. Bwsbu Ssuyg Dbs U U Dsl

Condition: used, Year of construction: 2009, cutting diameter 290 mm dimensions of saw-band 3100 x 27 x 0,9 mm cutting width 320 mm cutting speed 20 - 100 m/min 290 mm stroke back stop 290 mm cross-slide 290 x 320 Bebu Sowb Hzqo U U Dowl total power requirement 2,2 kW weight of the machine ca. 0,6 t dimensions of the machine ca. 1,7 x 1,0 x 1,5 m Band saw - semi-automatic - double miter - infinitely variable band speed

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Equipment: chip conveyor, rotational speed infinitely variable, MORI SEIKI NH5000 DCG horizontal center from 2008 CNC MSX 701 III Bobu Ssv Ubmpo U U Dewl 2 pallets 500 x 500 14,000 rpm spindle HP coolant center spindle ATC 80 BT 40 tools Chip conveyor Visible in operation in France.

Year of construction: 2010, Condition: ready for operation (used), Control Unit Brand MAZATROL Model MATRIX This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Application Types Turning Bsbu S U Uewbk Tko Dewl

Condition: new, Year of construction: 2023, cutting diameter 1600 mm saw band length 11000 mm cutting width 1,6 mm Bwsbu Sevn U Uaj U U Dol capacity 90 degrees: square 1600 X 1600 mm capacity 90 degrees: flat 1600 X 2500 mm total power requirement 11 kW weight of the machine ca. 19 t The pictures are only for orientation and illustration of the KSY model in a different size.

Condition: good (used), Year of construction: 1975, tool taper MK4 diameter of tools max. Ø 145 mm Bwobou Imbvsu S U U Dol table-size L: 800 x B: 700 mm surface area Ø 300 mm table travel 200 mm indexing max 5 Modul total power requirement 7,5 kW weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 1,5 x 2,3 m Application: Gear hobbing machine for gear cutting of spur and helical gears, worm gears and rollable profiles Cycle milling and single milling as well as up-cut and climb milling Specifications for machining spur and worm gears: -Outer Ø max. 250mm with counterholder -pitch max. 5mm -Tooth helix max. 45° -Tooth width max. axial milling 200mm and radial-axial milling 240mm -Milling width max. clamping table counterholder 655mm Milling slide: -swivelling 210° -travelling distance 350mm -feed, 2 directions, 16 steps in the range 0.2 - 6.3 mm/revolution Further features: -counter-point taper MK4, co-rotating -Centre distance of milling/clamping spindle with counter-holder min./max.: 30 / 240 mm -Counterholder with guide bushes (clamping arbor and milling arbor)

Year of construction: 1999, Condition: like new (used), Functionality: fully functional, Manufacturer: Arthur Klink Year of construction: 1999 Bwobu Ssr A Hcbo U U Del Type: horizontal broaching machine Model: RIW 10x1600x400 Weight: 2.700 KG General / technical data: horizontal hydraulic internal broaching machine in mint condition with tool holding system ideal for the use of flat broaching tools. Broaching stroke: 1.600mm Tractive force: 10,000 kg (100kN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece diameter: max. 400mm (due to the machine body of the tool trough) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Space requirement of the machine: (w x d x h) approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400Volt 50 HZ Connected load: 9kw Equipment: - the machine has an electric control for the clearing stroke movement with manual operation and automatic sequence - the machine has an integrated coolant system - the machine has a tool holding system for flat broaching tools (no feed) - The broaching carriage with the pulling head holder is equipped with a flat guide on both sides Accessories - 1 universal pulling head for flat shanks from 3mm to max. 25mm wide and a maximum pulling force of 10kN (10,000kg) - Complete machine documentation and CE declaration of conformity Remarks: The machine is ideal for the production of keyways. Due to the connection with the stable machine bed of the machine and the broaching tool holding system, the machine is particularly suitable for quick and easy use of flat broaching tools. The machine has been used very little and is in mint condition. The machine is available for inspection in our warehouse and is ready for demonstration under power. Our direct contact details and further information about the machine can be found in the attached PDF document

Condition: used, Year of construction: 2012, cutting capacity - round 290 mm cutting capacity - square 310 x 270 mm dimensions of saw-band 3100 x 27 x 0,9 mm saw band speed 20 - 100 m/min workpiece length - max. 3200 mm Number of working hours ca. 1500 h Bsbu S Uoup H Hys U Djwl dimensions ca. 1650 x 2300 x 1535 mm weight of the machine ca. 865 kg

Condition: excellent (used), Functionality: fully functional, wheel width: 500 mm, feed length X-axis: 5,000 mm, gear diameter: 500 mm, milling length: 5,000 mm, THREAD MILLING MACHINE Make: WMW HECKERT Model: ZFWVG 250X5000 – LATEST MODEL !! Thead and worm Milling length: 5000 mm Other Info: Machine complete in all its parts and accessories (change gears and more) Bobu S U Usvdnmbe Djwl

Year of construction: 2008, Condition: ready for operation (used), General Data Measurements depth 1835 mm Measurements height 1525 mm Machine weight 3500 kg Control Unit Brand FANUC Model Series 0i-TC Main Drive Spindle speed range 3500 Spindle bore 61 mm Number of axis 3 Movement X-Axis Movement 175 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 330 mm Z-Axis Rapid Traverse 24 m/min Additional Equipment Chuck dimensions: 8 inches This 3-axis Takamaz X-180 horizontal turning machine was manufactured in 2008. It features a maximum turning diameter of Ø 210 mm, a turning length up to 230 mm, and a bar diameter capacity of Ø 51 mm. The spindle supports speeds up to 3,500 RPM, enhancing productivity. Ideal for precision machining, it includes a 12-station revolver turret and rapid traverse speeds of 24 m/min on both X and Z axes. Contact us for more information about this machine. Bwjbjviy Hqju S U U Del Application Types Turning

Condition: new, Year of construction: 2023, cutting diameter 550 mm saw band length 6850 x 41 mm cutting width 1,3 mm Control Halbautomatisch Cutting area - square 550 x 550 mm Cutting area - flat 550 x 700 mm total power requirement 4 kW / 1580 Nm kW weight of the machine ca. 3775 kg dimensions of the machine ca. 1850 x 1500 x 3450 m TThe KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table which is 2 meters long on both the front and rear sides. Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale Bwjbu S U Uouddkds Djl image of the machine.

Condition: new, 310 mm 310 mm 340 x 310 mm saw band length 3730 x 34 x 1,1 mm table height 922 mm band speed 15 - 100 m/min total power requirement 3,0 kW weight of the machine ca. 1,65 t dimensions 1950x1755 m 2-column automatic band saw X-Smart 3 • Modern CNC control, freely programmable for multiple sawing jobs various cutting lengths and quantities • Inclination of the saw frame for maximum service life of the saw band • 2-column structure linearly guided on both sides • Linear guided button for automatic cutting height detection • Hydraulic clamping pressure reduction (option) for thin-walled pipes and profiles • Hydraulic cutting pressure regulation for maximum cutting performance • Material feed carriage in bridge construction for optimal performance Transport/feed and tension of the saw material • Feed unit via precision ball screw • Double vise before and after the saw band Bebu Sevn Uy Aj U U Dowl • Electrically driven chip conveyor • Cleaning gun for easy cleaning of the system • Full fairing with easy access for maintenance and cleaning • LED work light • Minimum remaining piece length of 50 mm • Waistband tensioning device (option)

Year of construction: 1965, Condition: good (used), Functionality: fully functional, machine/vehicle number: 2549, General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design clearing stroke: 2.000mm Tractive force: 25,000 kg (250KN) Mounting in the drawbridge: Ø 105mm Cylindrical Through-hole in the clamping table: Ø 125mm Workpiece clamping surface: 440mm x 440mm Workpiece diameter: max. approx. 800mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil volume: hydraulics approx. 450L / coolant approx. 100L Space requirement of the machine: (w x d x h) approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 19kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter - Tractive force display Accessories Bwsbjtuuvzeu S U U Djl - 1 universal pulling head for flat shafts up to a maximum width of approx. 40 mm - dividing head (see pictures) - Various special fixtures and clamping devices - Machine documentation Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is very well suited for heavy profile broaching tools. The machine is used and is in good condition for its age. The machine is available for inspection in our warehouse. The machine is new in our stock and is currently not technically or visually refurbished. Pulling heads for profile broaching are available on request, depending on DIN standard, dimensions and stock.

Condition: new, Year of construction: 2023, cutting diameter 1100 mm saw band length 11000 x 67 mm cutting width 1,6 mm capacity 90 degrees: square 1100 x 1100 mm capacity 90 degrees: flat 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 8700 kg dimensions of the machine ca. 2800 x 1700 x 5200 mm The KSY 550 x 700 is a semi-automatic and column-guided horizontal bandsaw. The chips are transported away via a spiral conveyor. A chip trolley approx. 60 x 50 x 40 is included in the scope of delivery. The roller tables can be moved forwards and backwards via the control panel. There is a 1.40 x 1.00 metre roller table on the outfeed side. There is a motorised roller table 2 x 1.40 m on the infeed side. Bwsbujtq Dw Eo S U U Dol Optional Specifications - Motorized System For Roller Table - Laser Line - Extra Double Roller Table - PLC-Screen - Anti-Vibration System The pictures are for orientation only and do not represent a true-to-scale image of the machine.

Condition: new, cutting diameter 250 mm saw band length 3150 x 27 x 0,9 mm table height 700 mm cutting width 250 x 320 mm cutting speed 25 - 90 m/min dimensions of saw-band 2480 x 27 x 0,9 mm 120 mm 120 mm 190 mm Impact energy 190 mm connected load frequency 400 Volt total power requirement 1,5 kW weight of the machine ca. 0,5 t dimensions 0,95 x 1,16 x 1,98 m Rock-solid band saw for solid material - Double miter cuts up to 60° - AutoCut - Vice with quick clamping device Bsbu S Ueff Efrj U Dswl - Belt tension control - Electric automatic cooling system - Material suggestion

Condition: new, Year of construction: 2023, cutting diameter 1600 mm saw band length 14000 mm cutting width 1600 mm hydraulic motor 3 kW total power requirement 11 kW / 7525 Nm weight of the machine ca. 20 t required space 4020 X 2220 X 7600 mm Bebu S U Ueuddfue Dewl Individually designed and manufactured horizontal bandsaw. Technical details (attached in technical data sheet).

Condition: new, Year of construction: 2023, cutting diameter 1100 mm Bwobu S Ueuddc Hj U Djl saw band length 12000 x 67 mm cutting width 1,6 mm Capacity 90° - round 1100 mm Capacity 90° - rectangle 1100 x 1100 mm Capacity 90° - square 1100 x 1300 mm total power requirement 7,5 kW / 3100 Nm weight of the machine ca. 12.000 kg dimensions of the machine ca. 3300 x 3000 x 5300 mm The KSS 1100 X 1300 is a semi-automatic and column-guided horizontal bandsaw. In addition, the machine has a driven roller table, which is 1 metre long.