Used Belflex Bf815 Scg-Tf for sale (1,281)

Condition: used, Year of construction: 2003, machine/vehicle number: 1964, Coil weight: 500 kg Material width: 41 mm Coil exterior diameter: 1.000 mm Celheuqc Ivocdwzjpw Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Condition: excellent (used), Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: FH87/G DRS132S4BE5HF/TF -Speed: 68 rpm -Power: 5.5 kW Celhcdwovvbnpezopw -Protection class: IP54 -Hollow shaft: Ø 60 x 280 mm -Brake: 28 Nm -Number: 2x motor available -Price: per piece -Dimensions: 760/335/H530 mm -Weight: 155 kg/piece

Condition: used, Item: D4313-Alfa Exchanger Alfa Laval Plate heat exchanger, Cpelhcsviu Atjdwzow Type MF6-TF II Volume 7.8 L Max. Working temperature 135 C Working pressure 5 bar

Condition: new, functionality: fully functional, Features of the Unit 1. Chain conveyor belt, 2 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotative end sealing unit, double sealing jaw 5. Robust, central fin seal structure 6. Three servo-controlled drives 7. HMI control panel 8. Two individual temperature controllers 9. Housing made of 304 stainless steel 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard running direction: left to right Cpelsydqahshcdwzew Technical Specifications 1. Product length: L90–300 mm 2. Product width: W30–160 mm 3. Product height: H5–55 mm 4. Packaging speed: up to 125 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 370 mm 6. Supply voltage: 1Ph. 220V 50Hz 7. Power consumption: approx. 6.5 kW 8. Machine weight: approx. 400 kg 9. Machine dimensions: approx. 3500 x 950 x 1450 mm

Condition: new, Year of construction: 2025, working table size: 3000 mm x 1500 mm emergency stop switch: no operational vacuum: -0,85 bar vacuum pump output: 40 m³/h pump capacity: 1,5 kW noise level: 70 Db heating system temperatur: max. 200 °C heating system: 16 kW machine length: 3100 mm Cpelhoi Hplkjcdwzsw machine width: 1650 mm machine height: 1100 mm weight: 850 kg

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Cpelhcdwswwxzhezsw Equipment and technical specifications: - The basic principle of Hofmann machines is the proven cast iron construction - Gray cast iron is by far the leader in vibration damping, compressive strength, and load capacity - Milling arbor 30 mm with right and left rotation - Milling fence with stop jaws, central adjustment, and fine adjustment of one jaw - Manual height adjustment with digital display and zero-reset button - Table size: 1200 x 820 mm - Table height: 890 mm - Motor power: 5.0 / 6.2 kW - Spindle speeds: 3000/4000/5000/6000/8000/10000 rpm - Height adjustment: 125 mm - Chip extraction ports: 110/120 mm - With Holz Her 2-roller feed unit Weight: 850 kg Availability: by arrangement Location: 63934 Röllbach

Condition: new, neu ca. 12 - 14 Wochen ab Auf Spanien 50410 € 952.75 € 35 mm MK 4 390 mm 94- 2.225 (16) 50 Hz 113 U/min M35 1660 mm 1510 mm 2600 mm 910 kg 180 mm 190 - 650 mm 1310 mm 125 mm 400 x 420 mm 0,10 - 0,18 - 0,24 (3) mm/min 750 - 1.500 U/min ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE drilling and milling machine automatic feed precision electromagnetic clutches geared drive cross table fixed base and displaceable headstock control panel cooling equipment with electric motor pump hand wheel for fine tuning clamping device for tools Celhceynmtxjdwzepw adjustable stop drill guard OPTIONAL EQUIPMENT (PRICES ON REQUEST): Digital read out for drilling depth Tapping device Motorized longitudinal and/or transverse feed Digital read out for table axes and/or drill head height adjustment

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, The versatile all-rounder combines outstanding workmanship with a broad range of applications. Our machine also offers intuitive operation, optimizing your packaging processes. A high-quality unwind unit with double automatic roll centering ensures precise material guidance. Furthermore, our active material feed system guarantees optimal web tension for flawless packaging results. The highly efficient brushless motors and user-friendly color touchscreen control system provide maximum flexibility during format changes, significantly simplifying your packaging operations. The machine is equipped with memory storage for machine parameter settings and can save up to 50 different products. For this packaging line, we also offer fully and semi-automatic feeding solutions, which can be retrofitted upon request. The machine is available with either left- or right-hand operation and features a rotary cross-sealing unit with an electronic overload protection switch for maximum safety. Thanks to its performance, versatility, and technological advancement, our machine is ideally suited for packaging food products such as brioches, cakes, candies, pralines, chocolate, as well as pharmaceutical products and various gift items. If you are looking to optimize your packaging processes with high production capacity and superior quality, Impuls Packaging is your ideal partner. System features: 1. Chain conveyor belt 2.6 meters in length (other lengths available on request) 2. Adjustable bag former 3. Single film loader + automatic film centering device 4. Rotary end sealing, single sealing jaw 5. Robust central fin seal structure 6. Four servo drive controls - Active material feed shaft - Central sealing - End sealing Colhcdwjwld Upozjpw - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Programmable bag length or fully automatic product length detection 13. Standard direction: left to right Technical Parameters 1. Product length: L120–500 mm 2. Product width: W30–200 mm 3. Product height: H10–80 mm 4. Packaging speed: up to 100 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph. 220V 50Hz 7. General power: approx. 4.8 kW 8. Machine weight: approx. 550 kg 9. Machine dimensions: approx. 4280 x 1200 x 1230 mm

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Cpslhcdwju Egp Iozew Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,248 h, Operating hours: 2248, first registration: 24.05.2022 Year of manufacture: 2022 Approx. operating hours: 2200 Max. lifting capacity: 3,300 kg Max. lift height: 6,600 mm Max. outreach: 3,500 mm Length to attachment carrier: 4,310 mm Width: 2,100 mm Height: 2,120 mm Total weight with forks: 6,500 kg Total weight without forks: 6,330 kg Engine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled Power: 85 kW (115 hp) Cpeleupq Tqehcdwzow 2,300 rpm Stage V Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD TOP incl. with optional automatic increase of engine speed Mineral hydraulic oil HVI 46 Transmission: 2-speed, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360° all-round visibility, GRAMMER air-suspended seat with lap belt, ROPS/FOPS certified, heating Front, roof and rear wipers Sun roller blind 4x1 joystick (electronic, with capacitive enabling and direction selector) Telescopic boom: 2-section with electronic end cushioning (Soft Stop) Attachment carrier: quick-change system, type “ZM2”, hydraulically operated from the cab Steering: hydraulic, 3 steering modes (all-wheel, front-wheel, crab) Drive: permanent all-wheel drive Axles: front rigid, rear oscillating Brakes: power-assisted disc brakes on all four drive shafts, automatically applied parking brake when engine stopped Hydraulic system: variable-displacement pump ("LOAD SENSING") Hydraulic working flow rate: 125 l/min Hydraulic fan flow rate: 46 l/min Total flow rate: 171 l/min Working pressure: 210 bar Flow-sharing control block Electrics: 12 V Battery: 100 Ah Alternator: 120 A Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audio-visual signal, attachment recognition and overload cut-off Special Equipment: Tyres: 400/70-24 158A8 Rear hydraulic connection with separate control EU type-approval as tractor/agricultural towing vehicle, 40 km/h Towing hitch: height-adjustable, self-locking, 30/32 mm pin, incl. socket for trailer lighting Air conditioning Boom suspension system (B.S.S.) LED rotating beacon on cab roof (approval required by customer) LED work lights on cab (2 front, 2 rear) replacing standard halogen lights 2 work lights at the end of the first boom section (main boom) ASCS upgrade: display with all ASCS functions + continuous flow front output Location: 54595 Prüm

Condition: used, mileage: 628,610 km, power: 353 kW (479.95 HP), first registration: 01/2020, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, fuel tank capacity: 540 l, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2020, Equipment: air conditioning, electric window regulation, fridge, Tyre size: 315/80R22.5 Front axle: Suspension: leaf suspension Rear axle: Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 6 GVW: 19.000 kg Make of engine: DAF Celhcdsyn Eixowzjpw

Condition: as good as new (ex-display), Year of construction: 2021, The machining center PROJECT TF 600 S was developed for efficient cabinet (carcass) production. Technical Specifications: Axes: X-Axis: - Max. workpiece length: 2,800 mm - Min. workpiece length: 200 mm - Travel speed: 130 m/min Y-Axis: - Max. workpiece width: 1,200 mm - Min. workpiece width: 50 mm - Travel speed: 75 m/min Z-Axis: - Max. workpiece thickness: 60 mm - Min. workpiece thickness: 8 mm - Travel speed: 30 m/min Units for 6-sided machining: 1. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 2. Top drilling head: - Vertical spindles in X-direction: 7 pcs - Vertical spindles in Y-direction: 5 pcs - Horizontal twin drilling spindles in X-direction: 2+2 pcs - Horizontal twin drilling spindles in Y-direction: 1+1 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm - Motor: 2.2 kW 3. Top grooving saw in X-direction: - Speed: 3,400 rpm - Max. saw blade diameter: 120 mm - Groove position: between 55 and 800 mm 4. Top routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm Cpslew Ugpyohcdwzsw 5. Bottom routing unit: - For milling and grooving - Motor: 3.5 kW - Collet: ER 25 - Max. tool diameter: 16 mm 6. Bottom drilling head: - Vertical spindles in X-direction: 3 x 3 pcs - Spindle pitch: 32 mm - Spindle speed: 3,400 rpm Control via Windows PC Software: MASTERWORK MACHINE VERSION Mobile control console with color screen, keyboard, and mouse Wireless barcode reader Additional features: - Intelligent, patented worktable: The worktable moves automatically up and down, as well as left and right for optimal support of all drilling and milling operations. Through-feed drilling and milling is also possible. - Controlled workpiece clamping device - Energy-efficient air flotation tables using an integrated fan (instead of external compressed air) - Rack and pinion drive on X and Y axes with linear guides - Ball screw drive on Z-axis with linear guides - CE safety features: light barriers and fencing, as well as 2 pressure stages for the clamping jaws - Automatic central lubrication system Further data: Dimensions: 5,280 x 2,480 x 2,190 mm (LxWxH) Extraction connections: 2 x 200 mm, 1 x 100 mm Required air pressure: 8 bar

Condition: new, Year of construction: 2025, OTINUS PROMOTION: 0% LEASING! Don’t wait for a better time – it’s now. Otinus machines with financing at no additional cost. A straightforward offer: you pay only the net price of the machine. Optimize your taxes in 2026 and choose proven equipment. Contact us for details! CNC Lathe HLC-4055 with Fanuc 0i TF Control System Machining range: - Max turning diameter over bed: Ø 560 mm - Max turning diameter over cross slide: Ø 320 mm - Max swing diameter: Ø 400 mm - Max turning length: 548 mm - Center height: 980 mm - X-axis travel: 210 mm - Z-axis travel: 610 mm Turret: - Type: Hydraulic V12 turret - External tool size: 25x25 mm - Internal tool diameter: Ø 40 mm - Indexing time: ≤ 0.55 s Spindle: - Drive type: Belt-driven - Max spindle speed: 4500 rpm - Power consumption (15 min): 11/15 kW - Torque (15 min): 140/250 Nm - Spindle nose: JISA2-6 - Spindle bore: Ø 76 mm - Max bar workpiece diameter: Ø 50 mm - Front spindle bearing diameter: Ø 100 mm - Spindle diameter: 208 mm Feed rates: - Rapid traverse X: 24 m/min - Rapid traverse Z: 30 m/min - X/Z servo motor power: 1.8/1.8 kW Tailstock: - Quill diameter: Ø 100 mm - Center type: MT No. 4 - Quill stroke: 120 mm - Tailstock travel: 410 mm Cpolhcdjwdt Szswzow Other parameters: - CNC system: FANUC - Power supply: 25 kVA - Coolant tank capacity: 200 l - Machine weight: 4.5 t - Dimensions (L × W × H): 4200 × 2050 × 1850 mm

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 400 h, load capacity: 4,500 kg, lifting height: 10,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 10,300 kg, total length: 5,040 mm, drive type: Diesel, construction width: 2,350 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Front tires size: 500/70 r 24 michelin xcml Rear tires size: 500/70 r 24 michelin xcml Cpelhcdwsxfm Nyjzew

Condition: new, functionality: fully functional, Features of the system: Celek Dz Hwjhcdwzspw 1. Chain conveyor belt, 2.9 meters in length (other lengths available upon request) 2. Two custom-made units with fixed form shoulder, tailored to product dimensions 3. Single film loader + automatic film centering device 4. Box motion end sealing unit with single sealing jaw 5. Robust, central fin seal structure 6. Eight servo-driven actuators 7. HMI control panel 8. Four individual temperature controllers 9. Stainless steel 304 housing 10. Documentation in the local language 11. Print mark control 12. Programmable bag length 13. Standard direction of operation: left to right Technical parameters: 1. Product length: L120-600mm 2. Product width: W70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products per minute (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1Ph, 220V, 50Hz 7. Overall power: approx. 8.8 kW 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: V1 01HOHS300KET5ESGR0SZ580, warranty duration: 12 months, The machine is usually always in stock. Short delivery times are possible. System Features 1. 2.5-meter-long chain conveyor (other lengths available upon request) 2. Adjustable bag former 3. Double film loader + automatic film centering device Colhceq Ikgksdwzspw 4. Rotary end seal, single sealing jaw 5. Solid center fin seal structure 6. Four servo-controlled drives - Active material feed shaft - Center seal - End seal - Conveyor belt 7. HMI control panel 8. Three individual temperature controllers 9. 304 stainless steel housing 10. Documentation in local language 11. Print mark control 12. Programmable bag length 13. Standard travel direction: left to right Technical Parameters 1. Product length: L40 - 300 mm 2. Product width: W30 - 160 mm 3. Product height: H5 - 60 mm 4. Packaging speed: up to 300 products/min (depending on product, bag length, material, and number of sealing jaws) 5. Maximum film width: 500 mm 6. Supply voltage: 1-phase 220V 50Hz 7. Total power: approx. 7.5 kW 8. Machine weight: approx. 450 kg 9. Machine dimensions: approx. 4250 x 990 x 1650 mm

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Processing System. Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications -Material Compatibility -Mild Steel, Aluminum, Stainless Steel -Working Thickness Range -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements. Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Cpelhcdji E Tkaewzew Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation.

Condition: new, Year of construction: 2025, -Tfon Leveltech® S-3513 Leveling Machine. -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results. -Key Specifications: Material Thickness: 0 – 0.3 mm -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Cpjlhokyrzlscdwzsw Total Weight: 5.000 kg.

Condition: new, Year of construction: 2025, -TFON Edge Rounding Machine Specifications: Material Compatibility: Steel, Aluminum, Stainless Steel. Process: Edge Rounding Material Thickness: 0 – 120 mm. Maximum Material Width: 1,000 mm. Cpeljui Ih Rjhcdwzow Minimum Part Dimensions: 50 × 50 mm. Maximum Material Weight: 500 kg. Conveyor Speed: 0.6 – 4.0 m/min Machine Weight: 3.000 kg

Condition: new, Year of construction: 2025, -TFON Leveltech® XS-3520 Leveling Machine. Cpeljityvfehcdwzjw -The TFON Leveltech® XS-3520 is a compact and efficient leveling solution designed for thin materials and smaller widths. Equipped with advanced electromechanical controls and user-friendly touchscreen operation, it delivers precision leveling with reliable overload protection for enhanced safety. -Key Specifications: Material Thickness: 0.3 mm – 5.0 mm. Maximum Material Width: 200 mm Minimum Material Length: 70 mm Flattening Gap Adjustment: Electromechanical / PLC Controlled Overload Protection: Standard Control Interface: Touchscreen HMI Machine Weight: 2,000 kg Machine Dimensions(L × W × H): 2,225 × 1,595 × 1,850 mm

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Purification System. -Material Compatibility. Mild Steel, Aluminum, and Stainless Steel. -Working Thickness Range: Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially Colhcjhq A T Uedwzopw Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces Surface Purification: Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface Industry Applications: Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Condition: new, Year of construction: 2025, -TFON Precision Edge Rounding & Finishing System. Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Cjlohq Dbmohcdwzspw Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output: Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time .

Condition: new, Year of construction: 2025, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workfl Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. Cpslohq A Txehcdwzow High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility TFON – Surface perfection, every time.

Condition: new, Year of construction: 2025, -Tfon Leveltech® TF M-5516 Leveling Machine. Engineered for precision leveling, the TF M-5516 efficiently handles material thicknesses from 1 to 15 mm with advanced control features for optimal performance and ease of use. -Key Specifications -Material Thickness: 1 – 15 mm -Maximum Material Width: 1,600 mm Minimum Material Length: 110 mm. Celhcdjkyrqfswzspw Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Servo Hydraulic / PC Controlled Overload Protection: Standard Control Screen: Touchscreen Machine Size (L × W × H): 3,500 × 2,905 × 1,950 mm Total Weight: 19.000 kg.

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series. Models: S-3560, S-3511, S-3513, S-3516. Cslhcjhwb Utedwzspw -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation -Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width. -S-3560: 600 mm -S-3511: 1.100 mm S-3513: 1,300 mm S-3516: (width not specified) Minimum Material Length: 70 mm. Flattening Gap Adjustment: Electromechanical / PLC Controlled. Overload Protection: Standard. Control Screen: Touchscreen Machine Weight: S-3560: 5.000 kg S-3511: 10.000 kg. S-3513: 14.000 kg. Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm. S-3511: 2,485 × 1,585 × 1,820 mm. S-3513: 2,695 × 1,585 × 1,820 mm