Used coilers for sale (122)

Condition: used, DECOILER DIMECO WIDTH: 1350mm COIL WEIGHT: 12t WITH INVERTER HYDRAULIC OPEN / CLOSE Hodpfx Aboytqxpsaow

Condition: used, JOINT Decoiler – Used – CE Model: JDM 8.0 S Capacity: 8,000 kg Hedpfx Abex N S H Ijajw Weight: 3,700 kg Year of manufacture: 2003 Available quantity: 2 units

Condition: used, Technical details: sheet width: 153 mm material thickness: 1,5 mm Number of Straightening rolls: 4x oben/upper/ariba Number of Straightening rolls: 5x unten/lower/abajo throughput speed: 180 m/min total power requirement: 7,5 kW Weight approx.: 0,543 t space requirements of the machine approx.: L:1,6xB:0,8xH:1,22 m Inside of the machine is a coil taper integrated, whcih can be adjusted via threaded spindle. Hjdou Ic Ekspfx Abaow description: - upper roll : width:160mm, dia. approx. 40mm, not driven, via manual adjustment - lower roll: width: 160mm, dia. approx. 40mm, fixed, not adjustable, driven - coil taper: max. dia.=1000mm, max. width 153mm, max. weight 500kg *

Condition: ready for operation (used), Good condition Hodpfoflvfvsx Abaew Max width: 1300 mm Max diameter 1200 mm

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Hsdpohx R Etofx Abaew Own weight approx. 5 tons Good condition - not electrically operational.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Coil weight: 150kg Hsdpfx Aboh T Ducoaow Strip witdh: max. 100mm Outer diameter: max. 1.200mm Inner diameter: 320 ... 520mm Performance • decoiler fixed on moveable frame • Disc on back side and ring on front side for lateral coil keeping • manual adjustable brake

Condition: used, OTO MILLS Double decoiler with bottom/top hold-down roll Model AD508SD Scope of supply includes: - Double hydraulic expansible mandrel - Hydraulic Mandrel rotation - Hydraulic Uncoiler rotation/lock - Hydraulic Uncoiler traverse for alignment - Brake pneumatically-operated disc OTO Mills Mandrel: Double hydraulic expansible mandrel Mandrel rotation: Hydraulic Uncoiler rotation/lock: Hydraulic Hjdpfx Aoymadzebaow Uncoiler traverse for alignment: Hydraulic Brake pneumatically-operated disc: OTO Mills

Year of construction: 2017, condition: excellent (used), strip width: 800 - 2.400 mm strip thickness: max. 3,5 mm Hsdpfog Ewansx Abaew coil weight: 20 t mandrel Ø: 600 mm

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder Hsdpoi Exp Eefx Abaew -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg

Year of construction: 2023, condition: used, sheet width 300 mm coil weight 1 t coil internal dia. 375-550 mm Hedpfx Abelp U Tbjajw coil outside dia. 1600 mm weight of the machine ca. 0,5 t dimensions of the machine ca. 1500x1500x1900 m

Condition: excellent (used), functionality: fully functional, Year of construction: 1988, loading capacity: max. 3.000 Kg. table diameter: 1.600 mm Hsdpotzwxwofx Abasw strip metal width: max. 150 mm

Condition: used, Decoiler, Powered Decoiler, Alfred Kullak (Solingen) Industrial Wire Decoiler, Used Machine Manufacturer: Alfred Kullak (Solingen) Type: Drahtablaufhaspel (Decoiler) Hjdpfx Abey Sggheaew Overall dimensions: Width: 1650 mm Depth: 1110 mm Height: 1670 mm Coil size: 340–1030 mm Load capacity: 500 kg Operating mode: Powered, control arm (dancer arm) controlled system Electrical data: 400 V

Year of construction: 2021, condition: used, DECOILER MAX COIL WEIGHT 1000kgr MAX COIL WIDTH 400mm Hsdpfegf Aaqsx Abajw MIN INNER COIL DIAMETER 370mm MAX OUTER COIL DIAMETER 550mm POWER 1,1kw LIKE NEW UNUSED 4 PIECES IN STOCK

Year of construction: 1975, condition: good (used), strip width: 200 - 1.650 mm strip thickness: 0,6 - 3 mm coil weight: 7,5 t Hsdpfjd Ha E Aex Abaow mandrel Ø: 508/610 mm

Condition: used, Year of construction: 2003, machine/vehicle number: 1964, Coil weight: 500 kg Hodpfx Aouqc Ivjbaow Material width: 41 mm Coil exterior diameter: 1.000 mm Expansion range: 250 - 500 mm Speed: 20 m / min Required power: 0,5 kW Dimensions L x W x H: 1.000 x 850 x 1.700 mm Weight of machine approx.: 200 kg

Condition: good (used), Year of construction: 2006, coil weight: 500 kg, Millutensil SLMD 500. Double decoiler / double rewinder. Capacity load: 500 kg x 2. Hodpfou A T Hzsx Abajw Inner diameter min 350 mm max. 600 mm. Strip width up to 300 mm. Outer diameter max. 1600 mm. High frequency inverter Danfoss. Sensor for loop control. Dimension 2000 mm x 2000 mm height 1800 mm. Made in Italy. More coilers, and presses on stock, Bruderer, Schaal, Mabu, Bihler, Schuler, Amada, San Gimignano, Kaiser, EBU...

Condition: used, Year of construction: 2001, machine/vehicle number: 07011175, Double mandrela coil weight each side: 1 ton Hjdpfx Abouqdgaoaew Material width: 200 mm Coil exterior diameter: 2.050 mm Expansion range: 350 - 640 mm Speed: 40 s.p.m. Required power: 5,2 kW Weight of machine approx.: 2,2 ton

Year of construction: 1980, condition: used, strip width: max. 2.000 mm strip thickness: 0,4 - 4 mm coil weight: 20 t cone Ø: 300 - 1.000 mm Hjdjckanpspfx Abaow

Condition: new, Year of construction: 2025, Roller for sheet metal unfolding. Working width: 1.250mm, loading capacity up to 2 tons and a brake. Hodjxd Rgyepfx Abajw

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm Hedpfxsbh Ubws Abasw strip thickness: 0,35 - 3 mm coil weight: 12,5 t mandrel Ø: 508 mm

Condition: new, Year of construction: 2025, machine/vehicle number: MOT01-300, coil inner diameter: 250 mm, coil outer diameter: 1,450 mm, coil weight: 1,000 kg, coil width: 300 mm, product width (max.): 300 mm, overall weight: 300 kg, load capacity: 1,000 kg, spreading range: 250 mm, Automatic coiler or decoiler Remote control console - wireless Automatic and manual working mode Speed fine tuning potentiometer Danfoss inverter Synchronized easily with punching line Ideal for stamping automatic lines Coiler motorized Central expansion Hedpfx Ajb H R Ayjbasw Run both directions, forward and reverse Loop sensors control Speed from 0.1 RPM to 28 rpm Motor with gear reducers Capacity max. load 1 ton Strip width up to 300 mm Inner diameter min 250 mm max. 520 mm Outer diameter max. 1450 mm Power 0.75 KW Dimension 1.200 mm x 1.200 mm height 1.600 mm Weight cca. 300 kg with CE certificate On stock also high speed presses Schaal, Mabu and Bruderer presses as well bas band saw blade welders

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm strip thickness: 0,5 - 3 mm coil weight: 6 t mandrel Ø: 508/610 mm Hsdpfed Ha E Iex Abasw

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table Hedpfxsd Ha E So Abasw strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t mandrel Ø: 508 mm

Year of construction: 1980, condition: good (used), strip width: 1.650/1.750 mm Hodpsdn I Hrefx Abasw strip thickness: 0,4 - 3 mm coil weight: 10 t interchangeable mandrels, Ø: 304/406/610 mm

Year of construction: 1986, condition: good (used), strip width: max. 200 mm Hsdpfxsbh Ucbo Abajw strip thickness: 0,1 - 1 mm coil weight: 0,5 t mandrel Ø: 304 mm