Used Ciata 55 R for sale (70,550)

Condition: used, Year of construction: 1994, functionality: fully functional, throat depth: 1,250 mm, Radial drilling machine Fab. Breda type. R 55-1250 Year of manufacture 1994 Technical details Make: BREDA Type: R 55-1250 Throat: 1250 mm Drilling capacity in steel: 55 mm Drilling capacity in cast iron: 70 mm Tapping capacity in steel: M 50 Tapping capacity in cast iron: M 65 Drill spindle mount: MT 5 Throat: 1250 mm Cross travel of headstock: 930 mm Minimum/largest distance from base plate: 5360 – 1375 mm Vertical travel of the boom: 705 mm Spindle stroke: 310 mm Kdjdpsv Rpf Sofx Abnoi Number of spindle speeds: 12 Spindle speeds: 30 – 1200 rpm Number of feeds: 8 Feeds: 0.06 – 1.0 mm/rev Base plate 2070 x 910 mm Clamping area base plate 1325 x 910 mm Motor power 4.4 kW - 380 volts Dimensions (L x W x H) 2.1 x 1.0 x 2.5 m Weight 3 t Accessories Drilling table 750 x 600 x 550 mm Cooling Hydraulic clamping All information is subject to change. A demonstration is available at any time in our showroom.

Condition: good (used), Year of construction: 1989, Ref. -No.: 10600 Manufacturer: G.BREDA Type: R 55 2000 Year of construction: 1989 Storage location: Halberstadt Country of origin: Italy Machine-No.: 16XXXXX Spindle Taper: MK 5 Clamping Area: 1000 - 1700 mm Automatic feeds: 0,06 - 1,00 mm / rev Spindle Speed: 30 - 1200 RPM Drive Capacity - Spindle Motor: 400 V / 5,5 kW Bore Capacity In Steel (Diameter): 55 mm Weight Of The Machine Ca.: 4800 t Dimensions Of The Machine Ca.: 2,99 x 1,12 x 2,85 m Drill spindle stroke: 240 mm Drilling performance reaming: 80 mm Thread cutting: M 40 approx. Further information: - Reach min. / max. / 320 / 2005 mm - Column diameter 360 mm - Boom stroke 855 mm - Spindle - base plate approx. 1000 - 1700 mm Kdsdpfx Aeym Ndqebnei - E - Central clamping - Cube table - Hydraulic vice - Coolant device The machine can be viewed under power by arrangement.

Condition: used, functionality: fully functional, power: 150 kW (203.94 HP), empty load weight: 36,000 kg, Year of construction: 2007, operating hours: 10,000 h, Equipment: air conditioning, gripper hydraulics, hammer hydraulics, Liebherr R934 C HDS Crawler Excavator Year of manufacture: 2007 10,000 operating hours Approx. 36,000 kg 150 kW Liebherr engine, 4 cylinders OQ 70/55 SW fully hydraulic quick coupler All hydraulic lines installed Extended monoblock boom Air conditioning Central lubrication system Kdjdpexq A Dkefx Abnei 140 cm digging bucket

Condition: used, first registration: 11/2015, color: other, Year of construction: 2015, TRAILERTIRES 385/55 R 22.5 ALU RIM 5/7/8/MM Ksdsxwc Ebepfx Abnodi

Condition: used, first registration: 11/2010, color: other, Year of construction: 2010, GOODYEAR TIRES IN GOOD CONDITION FOR MEGA OR LOWLOADER. Ksdpfx Absxvx Ipjnodi

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, throat depth: 2,000 mm, empty load weight: 5,500 kg, drilling capacity: 70 mm, spindle speed (max.): 1,250 rpm, spindle stroke: 330 mm, TECHNICAL DETAILS Ksdsxxrakepfx Abnsdi Drilling capacity in steel: 50 mm Drilling capacity in cast iron GG 20: 70 mm Arm reach: 2,000 mm Morse taper: MK 5 Spindle speed: 28 – 1,250 rpm Spindle stroke: 330 mm MACHINE DETAILS Control: conventional Total power requirement: 8 kW Machine weight: approx. 5,500 kg

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, throat depth: 2,005 mm, drilling capacity: 55 mm, column diameter: 360 mm, spindle speed (max.): 1,200 rpm, stroke length: 855 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 55 mm Boring capacity: 80 mm Thread cutting: approx. M40 Arm reach min.: 320 mm Arm reach max.: 2,005 mm Column diameter: 360 mm Boom travel: 855 mm Clamping surface: 1,000 mm - 1,700 mm Automatic feeds: 0.06 - 1.00 mm/rev Spindle speed: 30 - 1,200 rpm Spindle taper: MT 5 Drive power – spindle motor: 400 V / 5.5 kW Quill stroke: 240 mm Spindle to base plate: 1,000 mm - 1,700 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2.99 m x 1.12 m x 2.85 m Machine weight approx.: 4,800 kg EQUIPMENT Electric central clamping Box table Hydraulic vice Kdodpfx Aexn Nbdjbnoi Coolant device

Condition: used, mileage: 1,443,883 km, power: 315 kW (428.28 HP), first registration: 08/2016, fuel type: diesel, number of seats: 55, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, +++USB connection on all seats+++ Mileage according to speedometer Engine: Mercedes-Benz AD Blue Emission class: Euro 6 Transmission: Automatic Seats: 53+1+1 sleeping seats with lap belts possible, currently 49+1+1 sleeping seats with lap belts installed, 2 new double benches in the trunk _____ Safety Kjdpfx Absuyrivsnedi * Retarder * Cruise control * Adaptive cruise control * ABS, ESP, EBS * Front fog lights * Immobilizer * Xenon lights * Brake assist * Lane departure warning system * Multifunction steering wheel Passenger compartment * Auxiliary heating * Wood floor look * Air conditioning * Tables * Luggage racks * Luggage nets * Jet ventilation * Reading lamps * Double glazing * Footrests * Center WC * Refrigerator * Head leather inserts * Driver's microphone Exterior * Matrix * Lifting / lowering system * Power steering * Tachograph with card * Sun visor * Sleeping cabin * Electric exterior mirrors * Central locking * Roof hatches, fans, roof ventilator Audio [&] Communication * Navigation system * Radio, CD * USB connection * Video, DVD Miscellaneous * Vehicle dimensions: Length 13.11 m, width 2.55 m, height 3.77 m * Aluminum rims * Twin tires * Tires: VA 70%, HA 70% Our internal vehicle number: 11065 Errors excepted. Pictures and text may differ from the vehicle. Over 300 other vehicles always on offer.

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Kodpfx Abjvbcl Honjdi

Condition: good (used), The scope of delivery includes: 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm agraffe: 3 drillings clear width: approx. 2.700 mm Kodpfx Aoibzftobnedi 3 holes per agraffe hole spacing: approx. 100 mm diameter of holes: approx. 11 mm 01x Set screw material consisting of: 06x screws M10 06x nuts 06x washers

Condition: good (used), The scope of delivery includes: 01x pallet rack traverse, used Material color: orange IPE profile: 100 x 55 mm agraffe: 5 drillings clear width: approx. 2.700 mm Per agraffe: 5 drillings hole spacing: approx. 50 mm diameter holes: approx. 11 mm Kdjdpfx Absibzgxsnoi 01x Set screw material consisting of: 10x screws M10 10x nuts 10x washers

Condition: new, B&R X67DC1198 digital counter module Rev. L0 6S5520174498, unused in original packaging, 100% functional, delivery as per photos Kjdpfxox Eqvas Abnedi

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 400 mm y-travel 580 mm z-travel 460 mm Control Heidenhain iTNC 530 Additional information HSC Precision Machining Center HSC 55 linear NEW DMG Design Heidenhain iTNC530 3D Control SmarT.NC User Interface DMG ERGOLine® Control, 19" Screen HSC 55 linear 5-Axis Version Rotary Swivel Table Clamping Surface 400 x 400 mm Swivel Range A-Axis +10/-110°; C-Axis 360° Maximum Load Capacity 200 kg, Absolute Measuring Systems Including Drive Cooling for A and C Axes X = 450 mm, Y = 580 mm, Z = 460 mm 80 m/min Rapid Traverse Spindle Speed ??20 – 42,000 rpm For HSK-E50 Tool Holder according to DIN 69893 AC Main Drive with 13/10 kW (40%/100% ED) Tool magazine with 60 positions Chain magazine with double gripper Active cooling unit for main spindle and linear drives Active cooling unit for control cabinet Direct absolute measuring systems including purge air Coolant/air cooling switch Renishaw laser tool measurement for measuring tool length and diameter incl. calibration mandrel with tool holder 3D quickSET Toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations (only in conjunction with optional probe) PP 60 optical infrared probe Electronic handwheel Application Tuning Cycle (ATC) software Selection of the optimal machining mode for the current operation 20-position pallet tower storage and transfer station Pallet size: UPC 320x320mm Loading door and air supply at the worktable Kdjdjyv Ap Hspfx Abnsi Pallet management via machine control Including UPC-P chuck Four-color indicator light Air blower through the spindle center, selectable via M-function and softkey Maintained air with low oil content Dust extraction for graphite Rotating viewing window Operating mode 4 Process monitoring in production Laminated safety glass window

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, CNC controller: HEIDENHAIN iTNC530 X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360° (0,001°) A-axis degrees: +10° -110° Worktable Table dimensions mm: 400x400 Max. workpiece weight kg: 200 Spindle speed rpm: 42.000 Tool holder: HSK-E50 Tool magazine slots: 60 Kdsdpfx Ajyv H I Hobnoi Electronic Handwheel Infrared probe blowing air through spindle center selectable via M-function Signal lamp NC swivel rotary table 3D quickSET 20-position pallet tower storage and transfer station

Condition: used, Year of construction: 1996, 10 mm Punching force 55 to 40x10 mm flat steel 300x15 oder 200x20 mm L-beam 90° 120x120x10 mm L-beam 45° 70x70x7 mm 40 mm Kodsyv N Iiopfx Abnjdi square edge steel 40 mm 37 /min. throat 250 mm weight of the machine ca. 1.800 kg

Condition: excellent (used), Year of construction: 2016, Boy 55A Pro / Operating hours: 18,153 in automatic mode / Machine in very good technical condition. Year of manufacture: 2016 Injection unit: Screw diameter: 38 mm Injection weight: 123.9 g Injection pressure: 1508 bar Metering volume: 136.1 ccm Clamping unit: Clamping force: 55 t tie bar distance: 360x335 mm size of clamping platens: 665x600 mm ejector: hydraulic clamping unit: hydraulic Kdjdpfx Abeyvqmysnei Control system: Procan Alpha - touch screen Additional equipment: Machine in very good technical condition Operating hours: 18.153 in automatic mode Pneumatic core x 2 injection unit hardened - bimetal The machine has been regularly serviced by the authorized service boy in France It is possible to change the screw diameter for fi 32 mm or 42 mm Dimensions: Weight: 2430 kg Length/width/height: 3.25x1.14x2.02 m Drive: Pumps/motor: 11 kW Heating power: 7,7 kW Total power: 18,7 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Used Screening machine Kleemann 18/55-3 available from Koreman in Maastricht, the Netherlands. Ksdeywblijpfx Abnedi

Condition: used, Used Screening machine RN Maschinenbau 21/55-2 available from Koreman in Maastricht, the Netherlands. Kodpeywbfijfx Abnodi

Condition: used, Used Screening machine RN Maschinenbau 23/55-3 available from Koreman in Maastricht, the Netherlands. Kedpfx Aeywbfcjbnodi

Condition: used, Used Screening machine KRUPP 21/55-2 available from Koreman in Maastricht, the Netherlands. Kdodpfx Ajywa I Asbnsi

Condition: used, IBAG Screening machine 5500 x 1500 mm - 1 Kjdpoyway Sjfx Abnjdi

Condition: used, Screening machine Kleemann 18/55-3 Kdjdpeyv Ivljfx Abnei

Condition: used, Screening machine RN Maschinenbau 21/55-2 Kdjdpfx Abjyv Eivsnsi

Condition: used, Screening machine RN Maschinenbau 23/55-3 Ksdpfxoyv Eipe Abnodi

Condition: used, Screening machine KRUPP 21/55-2 Kjdsyv D Nbopfx Abnjdi