Used Tabe Agb-95 for sale (2,904)

Condition: good (used), Ideal 4850-95 Paper Cutting Guillotine Machine in very good condition, ready for production. Technical specifications: Working width: 475mm Stack height: 80mm Minimum scrap: 35mm Maximum distance from the knife to the saddle: 450mm Ijdpfxjywdm Ne Af Usat 230V power supply Key features: Electromechanical drive for the knife, clamp, and clamp Automatic clamp synchronized with the knife’s cutting movement Transparent covers on the front and rear tables Electronically controlled, two-handed cutting start Automatic knife return from any position Optical cutting indicator Additional equipment includes: tools, cutting stick, and documentation.

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug Iodpfxjyah R Nj Af Ueat - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: used, Year of construction: 2002, machine/vehicle number: 802287/01, Temperature control unit from manufacturer Remak, used and untested. This unit is designed for applications in tool temperature control, injection molding, and industrial process engineering. It operates as a single-circuit system with the REMAK control system. Water* is used as the medium, with a maximum supply temperature of 95 °C*. Heating capacity is 13.5 kW*, and pump performance is 66 l/min & 4.0 bar*. Year of manufacture: 2002, total weight: 90 kg. Iaodpfoy Su Dbjx Af Uot

Condition: used, Year of construction: 2011, machine/vehicle number: 408529.10.000/01, Temperature control unit manufactured by Hahn Automation, used and untested. Designed for applications in tool temperature control, injection molding, and industrial process engineering. Operates as a single-circuit system with REMAK control system. The working medium is water*, with a maximum flow temperature of 95 °C*. Heating capacity is 27 kW, pump capacity is 60 l/min at 4.5 bar*. Year of manufacture: 2010, total weight: 130 kg. Isdsy Su A Rspfx Af Ujat

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations Isdjvut Ewspfx Af Uoat with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table

Condition: like new (used), Year of construction: 2020, operating hours: 16,785 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 610 mm, CNC Machining Center Manufacturer: Fehlmann, Model: Picomax 95 Year of manufacture: 2020 Technical Data Make: Fehlmann Model: Picomax 95 Year: 2020 Operating hours: 16,785 total / 7,181 spindle hours Spindle speed: 50 – 18,000 rpm Spindle power: 25.2 kW Max. torque: 120 Nm at 50–2,010 rpm Control: Heidenhain TNC 640 X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Machine table: 1,600 x 550 mm, 10 slots, 12H8, 50 mm spacing XYZ positioning accuracy (ISO 230-2): A = 0.005 mm / R = 0.003 mm Electrical connection: 400 V 3P+N+E / 50 Hz / 63 A (T) Standard Equipment - Feed rate range: 1 – 30,000 mm/min (standard) - Automatic tool changer, operator side, main time parallel loading incl. Fehlmann extended tool management on TNC 640 - Direct linear measurement system with pressurized air in XYZ - Pressurized air cleaning with activated carbon filter - Coolant system with chip drawer and fine-chip filter insert, coolant spray gun, chip flushing, machine shutdown via M function - Cooled motor spindle and Y-axis drive - Spindle and thermal expansion compensation - Graphical machine diagnostics system via softkey Isdpfx Ajy Ny A Def Ueat - Drawer block, lower right - Interfaces: RJ45, USB, RS232 - 48-position chain magazine HSK-A63, double-gripper tool changer. Magazine accessible operator side, parallel to machining - Electronic handwheel HR 510 for TNC 640 - Active cooling system for motor spindle and Y-axis drive - Work area enclosure with polycarbonate safety windows; powder-coated; large-opening stainless steel sliding door at front/top for crane loading - Left side door with lockable polycarbonate windows - Chip flushing via machine bed - FEHLMANN cycle package Special Equipment - Automatic length compensation of the milling spindle via direct measuring system - Tool clamping system HSK-A63 - Leakage sensor to monitor coolant supply through spindle - Automatic right-side enclosure door for PICOMAX 95 - ProfiNet robot interface to PICOMAX as per Fehlmann interface description for customer-specific robot integration - Coolant system 700 l, BF/HD80, with through-spindle cooling, 80 bar, and chip conveyor - Emulsion and oil mist extractor system for work area; programmable operation via M function: on, off, intermittent - 3D probing system Blum TC52LF incl. spindle adapter HSK-A63 - LaserControl Blum LC50-DIGILOG for tool measurement and monitoring D 0.02 – 120 mm - Reference tool HSK-A63, Ø 8 mm - FEHLMANN 5-axis cycle package Automatic Indexing & Swivel Unit ATS 200 D - with Schunk TANDEM center vise KSP100 Automation – Unirobot pro Unirobot M-20iA-10P pro Robot: Fanuc 6-axis industrial robot - Manipulator: FANUC M-20iA - Max. payload: 20 kg - Teach pendant Safety fence system uniprotect Drawer system incl. workpiece carrier ALB - 10 pneumatic drawers with workpiece carriers (400 x 600 mm) FMB quick-change head Workpiece detection via light barrier Profinet interface Robot cell incl. program creation - Double gripper system Gripper modules: SCHUNK JGP 100-1 Max. workpiece weight: 3.3 kg All information subject to change. A demonstration is possible at any time in our showroom.

Condition: new, Reihansl RSH-3.6 / 600 KZ pump SN: 358-11-95, unused, 100% functional, scope of delivery as per photos, ATTENTION: Please enquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Ijdpfx Aji D Nbfsf Usat

Condition: new, GMN TSE 95 - 6000 / 1.1 grinding spindle SN:339464, unused in opened original packaging, 100% functional, scope of delivery as per photos Iodpfx Aoi Eabvsf Ujat

Condition: ready for operation (used), Siemens 6FC4100-1AA00-Z central unit SN:T311B095-95, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Iasdpoi Edxcefx Af Ujt

Condition: new, Trovalisier - and slide grinding machine Make: ABOAGYE Model: TV 95 SL Condition: new machine Speed: 1,500 3,000 rpm (stepless) Trough inside dimensions: 498 x 384 x 410 mm Iedpodwq Hgefx Af Usat Filling volume: 70 l equipped as standard with: -Timer -Water tank -Water pump -Manual

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Isdpfxoy Sazfs Af Ujat Axle 2 load: 1300 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Tempering, Circulating fluid tempering, Thermolator, Used machine Manufacturer: Industrial Frigo Típus: TW 9/95/x Year of manufacture: 2008 Iaodpfxoyrtk Sj Af Ust Weight: 190 Kg Overall dimensions: 1300 x 450 x 1200 mm Max. temperature: 95 °C Pressure: 4,35 bar Electrical data: 400 V ; 50 Hz ; 26 A ; 10 kW

Condition: new, functionality: fully functional, power: 3.5 kW (4.76 HP), fuel type: gasoline, color: yellow, operation weight: 92 kg, Year of construction: 2026, Equipment: UVV, Bomag BR 95 Vibratory Plate NEW Bomag BR 95 Vibratory Plate – NEW | 15 kN Centrifugal Force | 450 mm Working Width | Honda GX160 Petrol Engine Item Number: 63000021 Technical Data: Manufacturer: Bomag Model: BR 95 Condition: NEW Operating Weight: 92 kg Frequency: 90 Hz Centrifugal Force: 15 kN Working Width: 450 mm Engine: Honda Petrol Engine GX160 Engine Output: 3.5 kW Fuel: Petrol Starting System: Recoil Start Compaction Class: Light Compaction Special Feature: As compact as a rammer, more maneuverable than a reversible plate – ideal for fiber optic construction Highlights & Features: - Compact & agile vibratory plate – ideal for confined jobsite areas - Perfectly suited for fiber optic installations & narrow trenches - Robust Honda petrol engine – reliable & low-maintenance - 450 mm working width – precise & efficient - Ergonomic guide handle – low vibration & comfortable - Made by Bomag – proven quality & immediately available Applications: ✓ Fiber optic & cable installation ✓ Paving & narrow trench work ✓ Landscaping & horticulture ✓ Foundation and trench compaction ✓ Construction companies & municipalities ✓ Construction sites with limited space Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Nationwide & international delivery on request Pricing: ex stock Maassenstraße 91, D-46514 Schermbeck (Wesel district) Iaodpfxoy R Azfj Af Ust All information without guarantee. Subject to error and prior sale. Prices exclude VAT Other models & widths available! ➡️ Vibratory plates from Bomag & Wacker Neuson – new & used machines Purchase Bomag Vibratory Plate | BR 95 NEW | Vibratory Plate 15 kN | Plate Compactor with Honda Engine | 450 mm Working Width | Compact Plate for Fiber Optic Construction | Bomag Compaction Technology | Professional Petrol Vibratory Plate Your reliable partner for compaction equipment: Claudio Macagnino Construction Machinery & Commercial Vehicle Trading GmbH ➡️ Request now & secure immediately available new machines! If required, we are happy to arrange a virtual machine inspection via video call.

Condition: good (used), Year of construction: 2011, functionality: fully functional, cutting width (max.): 480 mm, DGUV certified until: 01/2027, Ideal 480-95 EP Iaodpfx Afoy Ifrbo Uot - Year of manufacture: 2011 - Fully operational - Includes spare blades, cutting bars, and accessories - Immediately available

Condition: new, Year of construction: 2024, Working width: 950 mm Workpiece height min: 4 mm Workpiece height max: 170 mm Height adjustment: electronic Workpiece thickness display: digital Control system: Fox 500 KTR Units: 1 1st unit: Combination unit for calibration and sanding / Helically grooved steel roller Ø 120 mm with fine height adjustment / Hard sanding pad with graphite lining Deburring brush: no Iedpeknyhlofx Af Usat Motor power: 7.5 kW Extraction port: 140 mm Machine length: 1388 mm Machine width: 1545 mm Machine height: 1668 mm Weight: 660 kg

Condition: new, Year of construction: 2026, functionality: fully functional, PLATEN LENGTH MM. 3000 PLATEN WIDTH MM. 1300 PRESS STROKE MM. 400 Iajdpsi E Tz Hefx Af Ujt VERTICAL CYLINDERS 6 - DIAM. 70MM. INTERMEDIATE PLATENS CONFIGURATED TOTAL THRUST 90 TON TOTAL POWER KW 21 HEATING DIATHERMIC OIL

Condition: used, mileage: 95,490 km, power: 79 kW (107.41 HP), first registration: 02/2021, fuel type: diesel, empty load weight: 2,089 kg, maximum load weight: 711 kg, overall weight: 2,800 kg, tire size: 215/65R15C, axle configuration: 4x2, wheelbase: 2,933 mm, next inspection (TÜV): 02/2025, fuel: diesel, energy efficiency: B, CO₂ emissions: 167 g/km, fuel consumption (urban): 7.4 l/100km, fuel consumption (extra-urban): 5.9 l/100km, fuel consumption (combined): 6.4 l/100km, brakes: other, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 1,990 mm, total width: 2,330 mm, loading space length: 2,554 mm, loading space width: 1,775 mm, loading space height: 1,406 mm, front tire size: 215/65R15C, rear tire size: 215/65R15C, Equipment: ABS, air conditioning, airbag, cabin, central locking, electronic stability program (ESP), fog lights, onboard computer, parking sensors, seat heater, sliding door, soot filter, traction control, * German vehicle * Not in good condition * Single owner * Genuine mileage ONLY 95,490 km * Condition as seen in photos * Truck registration * Body / Construction: High-volume panel van, medium height roof * Loading area: Length 2,554 mm x Width 1,775 mm x Height 1,406 mm * Rear wing doors without windows (opening angle 180 degrees) * Sliding door to load / passenger compartment on the right * Interior trim in load / passenger compartment: wooden panels * Floor covering: Vinyl in load / passenger compartment * Cargo area LED lighting * Lashing points (8) * Cargo area protection package * Start-stop system * Auxiliary electric heater * Electronic Brakeforce Distribution (EBD) * Driver assistance system: Crosswind Assist * Driver assistance system: Emergency Brake Assist * Engine 2.0 L - 77 kW TDCi CAT * Diesel particulate filter * Driver assistance system: Intelligent Acceleration Control * Driver assistance system: Hill Start Assist * Low emissions according to Euro 6d-TEMP standard * Electronic traction control * Driver airbag * Electronic Stability Program (ESP) * Cab seats: Heated passenger seat * Cab seats: Heated driver’s seat * Anti-lock Braking System (ABS) * Drive type: Front-wheel drive * Exterior mirrors electrically adjustable and heated * Indicator integrated into exterior mirror * Heated windscreen * 6-speed gearbox * Black-grey radiator grille * Side protection strips * Daytime running lights * On-board computer * Lightly tinted heat-insulating glazing * Trailer Stability Assist (TSA) * Front and rear mud flaps * Air conditioning * Audio system 13: Digital radio reception (DAB / DAB+) with 4" multifunction display * Audio system: Radio with USB and Bluetooth hands-free system * Visibility Package 1 * Fog lights * Electric windows * Seat Package 4: Driver’s seat (adjustable in 4 ways) - Double passenger seat, fabric * Driver’s seat armrest * Basic * Front and rear parking sensors * Wheelbase 2,933 mm * Gross vehicle weight 2,800 kg * Kerb weight 2,089 kg * Payload 711 kg Should a new TÜV inspection be required, we will be glad to provide you with an offer from our partner workshops. Our offer generally DOES NOT INCLUDE new TÜV inspection, DGUV, SP, or UVV certifications. More trucks can be found on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and assessment of the goods, to avoid any misunderstandings regarding their condition and suitability. Inspections and assessments can be arranged at any time by appointment and are expressly encouraged. Ijdpjvxg Nkjfx Af Uoat All information is provided without guarantee. No liability will be accepted for errors or incorrect details in the offer. The buyer is responsible for independently inspecting and verifying the condition and specification of the goods/vehicles. Subject to change, prior sale and errors excepted.

Condition: refurbished (used), Year of construction: 2019, operating hours: 16,048 h, load capacity: 1,600 kg, lifting height: 5,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,420 mm, fork length: 1,150 mm, empty load weight: 2,421 kg, FRIEDMANN FORKLIFTS – OVERHAULED BY EXPERTS. FOR PROFESSIONALS IN ACTION Our forklifts are technically refurbished according to FEM-4.004 and the latest safety standards – for maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – every vehicle is thoroughly inspected and overhauled. ✔ Made in Germany – with responsibility and precision ✔ Rigorous technical inspection ✔ 400+ vehicles available Isdpfx Asy Rnymjf Uoat ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test and get advice on-site – we’ll find the right solution for you. Industrial Truck Data: Manufacturer: Jungheinrich Type: Front Forklift EFG 216k Drive type: Electric Load capacity: 1,600 kg Year of manufacture: 2019 Operating hours: 16,048 Lift height: 5,500 mm Mast type: Triplex Free lift: Yes Overall height: 2,420 mm Fork length: 1,150 mm Unladen weight: 2,421 kg Load center: 500 mm Tyres: Solid rubber Model type: EFG 216k Battery weight: 870 kg Cabin configuration: Solo-Pilot control lever Lighting: 2x front working lights Lighting: BlueSpot rear – safety light Attachment: Side shifter

Condition: refurbished (used), Year of construction: 2018, operating hours: 9,367 h, load capacity: 1,800 kg, lifting height: 4,400 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,040 mm, fork length: 1,150 mm, empty load weight: 2,647 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE Our forklifts are technically overhauled according to FEM-4.004 and the latest safety standards—to ensure maximum quality and your safety. From chassis to battery, including drive, brakes, steering, and electrics—every vehicle is thoroughly inspected and reconditioned. ✔ Made in Germany—with responsibility and precision ✔ Strict technical inspection ✔ 400+ units available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support—even after the purchase Test on-site and receive expert advice—we’ll find the optimal solution for your needs. Industrial truck specifications: Manufacturer: Jungheinrich Type: Counterbalance Forklift EFG 218k Drive type: Electric Load capacity: 1,800 kg Year of manufacture: 2018 Operating hours: 9,367 Lift height: 4,400 mm Mast type: Triplex Full free lift: Yes Overall height: 2,040 mm Fork length: 1,150 mm Unladen weight: 2,647 kg Iasdpfjy Rnxcsx Af Uet Load centre: 500 mm Tyres: Solid rubber Model: EFG 218k Battery type: PzS Battery weight: 870 kg Cab type: Front & overhead windscreen Cab features: Solopilot control unit Lighting: Rotating beacon Lighting: Rear blue spot safety light Lighting: Front blue spot safety light Attachment: Sideshift

Condition: refurbished (used), Year of construction: 2011, operating hours: 7,266 h, load capacity: 1,700 kg, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, fork length: 1,150 mm, empty load weight: 2,750 kg, Equipment: cabin, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. BUILT FOR PROFESSIONALS IN ACTION Our forklifts are overhauled in accordance with FEM-4.004 and the latest safety standards – ensuring maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics – each unit is thoroughly inspected and refurbished. ✔ Made in Germany – with responsibility and precision ✔ Comprehensive technical inspection ✔ 400+ vehicles in stock ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after your purchase Test on site now and receive professional advice – we’ll find the right solution for you. Industrial Truck Specifications: • Manufacturer: Jungheinrich • Model: EFG 218 Counterbalance Forklift • Drive type: Electric • Load capacity: 1,700 kg • Year of manufacture: 2011 • Operating hours: 7,266 • Mast type: Triplex • Free lift: Yes • Overall height: 2,360 mm • Fork length: 1,150 mm • Unladen weight: 2,750 kg • Load center: 500 mm • Tyres: Solid rubber • Model designation: EFG 218 • Battery type: PzS • Battery weight: 870 kg Iedoy Rnw Sjpfx Af Usat • Cabin type: Overhead guard • Cabin features: Solopilot control unit • Lighting: Rear Bluespot safety light • Lighting: Front Bluespot safety light • Attachment: Sideshift

Condition: refurbished (used), Year of construction: 2015, operating hours: 3,059 h, load capacity: 2,000 kg, lifting height: 750 mm, load center: 600 mm, fuel type: electric, mast type: simplex, construction height: 1,400 mm, fork length: 1,150 mm, empty load weight: 569 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONAL USE Our forklifts are technically refurbished according to FEM-4.004 and the latest safety standards—for maximum quality and your safety. From the chassis to the battery, including drive, brakes, steering, and electrics—every vehicle undergoes thorough inspection and reconditioning. ✔ Made in Germany – with responsibility and precision ✔ Strict technical inspection ✔ 400+ vehicles available ✔ Worldwide shipping & customs clearance ✔ Service & spare parts at fair prices ✔ Personal support – even after purchase Test and receive expert advice on site now – we’ll find the right solution for you. Industrial truck data: Manufacturer: Jungheinrich Model: Low-lift pallet truck EJE C20 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2015 Operating hours: 3,059 Lift height: 750 mm Mast type: Standard Initial lift: Yes Overall height: 1,400 mm Fork length: 1,150 mm Unladen weight: 569 kg Iaodpfxey Rnt Tj Af Ust Load centre: 600 mm Tyres: Polyurethane Model type: EJE C20 Battery type: Gel Charger: Integrated charger

Condition: used, mileage: 95,076 km, power: 120 kW (163.15 HP), first registration: 11/2017, fuel type: diesel, empty load weight: 2,290 kg, maximum load weight: 1,210 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, brakes: other, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 7, loading space length: 3,350 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, airbag, cabin, differential lock, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking heater, power assisted steering, soot filter, traction control, trailer coupling, * German vehicle * 1st owner * Original 95,076 km * Condition as shown in photos * Double cab with 7 seats * Long flatbed body * Flatbed body with aluminum side panels * Body dimensions: 3,380 x 2,000 x 400 mm * Phenolic resin-coated anti-slip floor * DIN lashing rings * High front panel * Trailer coupling * Towing capacity: 2,000 kg * Air conditioning * ABS/ASR/ESP * 6-speed manual transmission * Central locking with remote control * Airbag * Rear window * Electric windows * Radio USB navigation * Electric mirrors * Storage box * Leaf suspension * Bluetooth phone * Gross vehicle weight: 3,500 kg * Curb weight: 2,290 kg * Payload: 1,210 kg If a new TÜV inspection is required, we are happy to provide you with an offer from one of our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV certification, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and check of the goods, so that the buyer does not develop any false expectations regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details are provided without guarantee. We do not accept liability for mistakes or incorrect information in the listing. The buyer is obliged to independently satisfy themselves as to the condition and equipment of the goods/vehicles. Iedpfx Aey N Ah Ajf Usat Subject to change, prior sale, and errors.

Condition: used, mileage: 29,427 km, power: 130 kW (176.75 HP), first registration: 04/1998, fuel type: diesel, empty load weight: 9,125 kg, maximum load weight: 1,075 kg, overall weight: 10,200 kg, tire size: 12.5R20, axle configuration: 4x4, wheelbase: 3,690 mm, next inspection (TÜV): 06/2026, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 3, loading space length: 3,000 mm, loading space width: 2,400 mm, loading space height: 1,750 mm, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, parking heater, tail-lift, trailer coupling, Vehicle location: Bovenden, service vehicle, double passenger seat, rear window, sun visor, 6-speed switch, ABS (anti-lock braking system), differential lock, rotating beacon, stowage box, leaf suspension, tarpaulin and frame, trailer coupling with air and light, underrun protection, roof hatch, steel tail lift, upright. Wheelbase: 3690 mm. Body: equipment box with roller shutters and flatbed with tarpaulin, fitted with a 1.5t tail lift MBB 1500K/800, loading height approx. 1230mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Iajdpfxox H Amaj Af Ust

Year of construction: 1998, condition: good (used), Screwcapper for plastic caps diameter 50mm x 20mm H Isdpjh Np Uqjfx Af Ueat 380v 7,5kw machine with cap feeder/sorter and no cap detection. speed up to 50/min as-is or adjusted to customer needs

Condition: used, Year of construction: 2025, empty load weight: 815 kg, total length: 827 mm, construction height: 627 mm, construction width: 627 mm, Drive battery Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: AIM Battery type: PzS Battery year: 2025 Iedpfxoy I Ehpj Af Ujat Battery condition: 80 - 100% Description: Suitable for Linde E 16, E 16 P, BR 386 and E 16 C-02 BR 335 as well as other brands. Price includes return of an old battery. Capacity 95%.