Carcase press

Gannomat Concept 70 Eco

Condition: good (used), Year of construction: 2014, Used carcass press Dcsdpfxjxhc T To Ag Ujn - GANNOMAT Concept 70 Eco - Year of manufacture: 2014 - Available December 2025

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Lamella - carcass press with rapid traverse Technical data: Lamella carcass press from our showroom; Working range: width from 150 - 2.500mm , height from 150 - 1.400mm; depth 700mm; - lamella press beam top with 6 elements, lamella press beam side with 5 elements - lamella press beam with practice-proven tolerance compensation for tightly pressed carcass joints - Counterpressure surfaces are 40 mm thick, coated continuous support plates - The pressing force of the pressing bars is infinitely variable electronically controlled by 2 potentiometers and adjusted via frequency converter, therefore the torque transmission is absolutely wear-free. - Pressing force for horizontal press bars min. 500 daN (kg) to infinitely variable max. 2200 daN (kg) - Pressing force for vertical press bars min. 300 daN (kg) to stepless max. 2200 daN (kg) - Including option: Rapid traverse speed for fast positioning of the press bars, controlled by automatic workpiece recognition with sensors in the press bars, press speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Jog mode for precise positioning of the two pressing beams e.g. for low pressing forces, drawers and carcasses 45 degrees. Simple operation via 6 separate pushbuttons, freely adjustable pressing time preselection with automatic opening, loading height 300 mm. Machine is in our showroom and can be delivered immediately. Dcjdpfx Agsiidm No Usn Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2024, machine/vehicle number: 1300.448, Neue Ausstellungsmaschine! Listenpreis: 32.665,- € komplett in Standardausführung mit: Stabiler, verwindungsfreier Rahmen aus Stahl, in Schweiß- und Schraubkonstruktion - Lamellen-Pressbalken OBEN mit 6 Elementen, Lamellen-Pressbalken SEITLICH mit 5 Elementen - Lamellen-Pressbalken mit praxisbewährtem Toleranzausgleich (System Ganner) für dicht verpresste Korpusverbindungen - Gegendruckflächen (Seitendruckwand, Boden) sind 38 mm starke, beschichtete, durchgehende Auflageplatten - Durchgehend Pressfläche mit Höhe 95 mm am Vertikal-Pressbalken unten - Elektromotorische Verstellung der beiden Pressbalken über Präzisions-Trapezgewindespindeln (mit erhöhter Steigungs- und Rundlaufgenauigkeit) und Hochleistungs-Laufmuttern mit Fettreservoir - Die Verpressung erfolgt elektromotorisch, über 2 getrennte Schneckengetriebemotoren (2 x 0,75 kW) - Die Presskraft der Pressbalken ist durch 2 Potentiometer stufenlos elektronisch eingestellt und über Frequenzumformer geregelt, daher ist die Presskraft-Regelung absolut verschleißfrei - Presskraft für Horizontal-Pressbalken min. 500 daN (kg) bis stufenlos max. 2200 daN (kg) - Presskraft für Vertikal-Pressbalken min. 300 daN (kg) bis stufenlos max. 2200 daN (kg) - Press- und Verstellgeschwindigkeit der Pressbalken mit Feinpositionierung, über 3-Stufen-Wahlschalter 5 / 10 / 25 mm/Sekunde - Einfachste Bedienung über 6 getrennte Drucktaster, 8 Bewegungsabläufe sind über Steuerung wählbar - Frei einstellbare Presszeitvorwahl mit Öffnungsautomatik 0-30 min (umschaltbar auf Sekunden oder Stunden) - Arbeitshöhe/Beschickungshöhe: 300 mm - Arbeitsabmessungen: Länge min: 150 mm, max: 2500 mm Höhe min: 150 mm, max: 1400 mm Tiefe: 700 mm Dsdpfx Aeuf Hx Hjg Ujcn Gewicht: ca. 1800 kg Netto Abmessung: (Länge x Breite x Höhe) 3,45 m x 0,95 m x 2,30 m Elektrischer Anschluss: 400V, 3Ph, 50Hz (3,2 kVA, 16A) Zusatzausstattungen: Eilgang-Verfahrgeschwindigkeit, für schnelles Positionieren der Pressbalken, gesteuert über automatische Werkstückerkennung mit Sensoren in den Pressbalken, Pressgeschwindigkeit 5 / 10 / 25 mm/Sek. und Eilgang-Verfahrgeschwindigkeit 50 mm/Sek., die Sensoren können abgeschaltet werden für die Verpressung von Sonderteilen 1 Satz Maschinenfüße (Abrbeitshöhe 500 mm)

Condition: excellent (used), Year of construction: 2016, LAMELLA – CASE CLAMP PRESS GANNOMAT “CONCEPT 70 ECO” Complete in standard configuration including: - Sturdy, torsion-resistant steel frame, constructed with welded and bolted assemblies Dcsdjw Td A Iopfx Ag Ujn - UPPER lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements - Lamella pressure beams feature the tried-and-tested tolerance compensation system (Ganner system) for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Clamping is electromotor-driven, with two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously adjustable electronically using two potentiometers and regulated via frequency inverters, providing a completely wear-free press force control - Pressing force for horizontal beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speeds of the pressure beams with fine positioning, switchable via 3-stage selector: 5 / 10 / 25 mm/sec - Extremely user-friendly operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, with 6-month parts warranty Location: ex stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 2013, LAMELLAR - CASE CLAMP GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Case joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electrically operated adjustment of both press beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir. - Clamping is performed electrically using two separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per press beam. - The pressing force of the press beam is electronically regulated and set via frequency converter, thus torque transmission is completely wear-free. - Pressing and adjustment speed: 25 mm/sec. - Very simple operation via 6 separate push buttons; 6 movement operations can be selected via the controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 min (switchable to seconds or hours). Dcsdpew Tdymofx Ag Ujn - Working height/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm. Depth: 700 mm 1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) Machine No. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Machine used: Year of construction: 2013, fully overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - immediately available -