Carcase press

Maweg NA-15

Condition: new, Year of construction: 2026, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Knedjiidm Njpfx Amveb Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 1994, condition: ready for operation (used), Two identically constructed heated Ital presses are available. Press length: 1700mm, press width: 1500mm, press height: 1400mm, press force: 800t, total connection: 30kW, machine dimensions X/Y/Z: approx. 5400mm/2300mm/3200mm. Including piston from above, fittings for chair seats and heating. Documentation available. On-site inspection is possible. Kedeu Rp Hmspfx Amvjnb

Year of construction: 1983, condition: good (used), This WEBER extruder is in machine storage at Plastima Used Machinery. The machine is from 1983 and is in fine condition. - Brand: Hans Weber GmbH - Model: ZE 30 - Year built: 1983 - Single-screw extruder - Screw Ø: 30 mm Knjdpjq Tr Tbjfx Amveb - Ratio: 20 L/D

Year of construction: 1991, operating hours: 102,364 h, condition: good (used), This extrusion line from Hans Weber GmbH is in machine storage at Plastima Used Machinery. The line is from 1991 and is in used but good condition. - Brand: Hans Weber GmbH - Model: WEBER DS 6.5 - Year of construction: 1991 Knodpfjqpft Isx Amveb - Screw Ø: 65 mm - Working hours: 102.364

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Knjdpfx Amevw Aqhovob

Condition: used, Year of construction: 2005, SECOND-HAND BENDING PRESS VECCHIATO MM. 2600X1300 - CE RULES - Opening mm. 1500 - N. 4 cylinders - Top bottom movement - Year 2005 - Safety nets Ksdpfx Amewrzbajvsnb - Manual and CE certificate

Condition: new, Pfeiffer air cooler Kodped Sz Dtsfx Amvsnb €100 per unit 20 units available PM Z01 363A

Condition: used, Stop magnet, pull magnet, opening magnet, stop magnet, locking unit -Manufacturer: Thomas/Sauer gear -Type: 82-5650-106700 -for: Sauer gear -Type: WE10J402F1E0D220 -Connection: 220 volts -Stroke: 12 mm -Number: 1x available Knodjd Atxuopfx Amvjb -Price: per piece -Dimensions: 115/210/H145 mm -Weight: 7 kg