Condition: good (used), clamping plate, marking plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 1530 x 1145 mm Cgsb Emy Isv E Hz To Tjt -Table height: 745 mm -Plate thickness: 25 mm -Transport dimensions: 1530/1145/H745 mm -Weight: 403 kg

Condition: excellent (used), Extension for HILMA vice jaw width 160 mm Jaw width extension Cgsb Emy Ionl Drzo Tet length of tie rod 560 mm Weight 21,5 kg

Condition: good (used), Jaw chuck - driven via link chain - clamping range up to 450 mm - 1 steady rest adjustable - 1 steady rest adjustable & mobile - jaw chuck: 80 cm wide, 55 cm deep, 90 cm high - Steady rests adjustable up to 1.000 mm Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Cgeb Eom Th Avomy I Tet Shipping with forwarding agent.

Condition: used, This SCHUNK magnetic chuck is being auctioned online in our insolvency auction for Zetterer Präzision GmbH - Operating and Business Equipment - Machinery (2 locations). You can find this and many other items on our platform. Cgsb Emewhc Efoy I Tet

Condition: new, Technical data: Length: 457 mm Width: 152 mm Height: 66 mm Documentation in German and English Cjb Emyopvkn Rs I Tsgt Condition: as good as new, unused

Condition: used, Centrifugal fan NICOTRA - Gebhard type REM 18-0500-4W-16-C RD/0 Csbopp D Ivo Emy I Tjgt Make No. 142-943705-458068/1 Year of manufacture 2012 Volume flow max. 10825 m³/h = 180m³/min. density 1,2 kg/m³ Air inlet Ø 500 mm Air outlet 640 x 320 mm Motor speed 1440 rpm. Motor power 2,2 kW Mains connection 400 Volt 50 Hz - fan wheel with 12 fan blades - direct flanged drive motor - mounted adapter ring with flex sleeve Ø 500 mm - adapter flange for air inlet from Ø 500 to 600 x 305 mm rectangular flange - Galvanized sheet metal housing Space requirement L x W x H 950 x 750 x 890 mm Space requirement with pallet L x W x H 1270 x 990 x 1500 mm Weight centrifugal fan 110 kg weight with pallet 135 kg very good condition

Condition: good (used), Bezel, moving bezel, steady rest, lynette -Bezel: moving -Tip height: see photos for dimensions -Plating: Brass -Dimensions: 170/80/H275 mm Csb Emyjwcdvzo I Tsgt -Weight: 2.9 kg

Condition: as good as new (ex-display), 4 different adaptors for direct clamping Make WNT Cgob Emjdgc D Rey I Tet Length 55 mm ID: 28 322 5 G 200 28, 322 0 G 200 28.321 6 G 200 28.40 2 0 S

Condition: good (used), Tool holders SK30 - approx. 60 boring tools - Thread compensation holder - approx. 40 collet chucks Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. Cgobjum Rh Ae Emy I Tst VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 2013, machine/vehicle number: ECQ2100, This EROWA CMM Qi machine, complete with a PC and laptop, is being auctioned online in our insolvency auction for Zetterer Präzision GmbH - Operating and Business Equipment - Machinery (2 locations). Cgjbewhctie Emy I Tet You can find this and many other items on our platform.

Year of construction: 2003, Condition: ready for operation (used), - USED - CONTINUOUS POSITIONING AUTOMATIC DIVIDING TABLE TABLE DIAMETER: 250 mm MAX ADMITTED LOAD: 125 Kg Cgeb Emjwd U Evoy I Tot TABLE SPEED: 22 rpm WEIGHT: 132 Kg OVERALL DIMENSIONS: 380 x 455 x 334 mm

Condition: excellent (used), Year of construction: 2020, Functionality: fully functional, overall weight: 240 kg, workpiece weight (max.): 30 kg, Very well-maintained tool presetter UNO 20 Premium Cgeb Emy Ijwg D A As Tst Max. tool length 400 mm Max. tool diameter 400 mm SK40 Including test report Complete, including table, label printer, and computer Subject to prior sale

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chuck, soft Cgjb Emy Iowcc Uij Tst -Jaw width: 18 mm -Dimensions: see photo technical drawing -Dimensions total: 55/55/H42 mm -Total weight: 0.6 kg

Condition: like new (used), Indexing table Manufacturer: Deckel / Maho Type: 81.208143 Clamping surface diameter: 625 mm Cob Emowb D N Esy I Tjgt Clamping width: 515 mm T-slot width: 14 mm Transport dimensions: Width: 650 mm Depth: 520 mm Height: 610 mm Condition: As good as new

Condition: good (used), Chip protection cabin - with safety switch - Doors on all 3 sides - Width: 200 cm - Depth: 75 cm - Height: 50 cm Good condition fully functional can be inspected and tried out on site. Shipping also abroad. Inspection : Basically, I would like to point out that the item can be inspected and tested under power before purchase to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Cgjb Emeum Ri Hoy I Tst Shipping with forwarding agent.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set Ceb Emewcautey I Tegt -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 85/66/H62 mm -Total weight: 1.7 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm Cgob Emowcaugjy I Tjt -Dimensions: see photo technical drawing -Total dimensions: 65/60/H48 mm -Total weight: 1.0 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft Cgob Emyjwb Dlao I Tst -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 66/60/H44 mm -Total weight: 1.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws Cjb Eowb Dk Njmy I Tsgt -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H46 mm -Total weight: 1.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 65/60/H46 mm Cjb Eewb Dkcsmy I Togt -Total weight: 1.1 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft -Jaw width: 20 mm Cjb Eswb Dixjmy I Tegt -Dimensions: see photo technical drawing -Total dimensions: 80/63/H58 mm -Total weight: 1.5 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck, soft Cgsb Emy Ijwb Dhzj Tst -Jaw width: 20 mm -Dimensions: see photo technical drawing -Total dimensions: 67/60/H41 mm -Total weight: 1.0 kg

Condition: good (used), Rolling jaws, floating center jaws, pull-down jaws, machine vice jaws Cgob Emy Iewb Akne Tot -Clamping jaws: 2 pieces ground steel jaws width 160 mm -Hole spacing: 100 mm / Ø 11 mm -Shipping/Price: complete -Transport dimensions: 160/65/36 mm -Total weight: 2.8 kg

Condition: good (used), Rolling jaws, floating center jaws, pull-down jaws, machine vice jaws, clamping jaws -Manufacturer: Hilma, pull-down jaws 2 pair -Type: 3721Jaw width: 160 mm Csbewbz T Ue Emy I Tegt -Inner dimensions: 125/110 mm -Groove width: 15 mm -Shipping/Price: complete -Transport dimensions: 160/110/H80 mm -Weight: 6.6 kg/piece

Condition: good (used), fixed point, fixed center point, fixed morse taper, fixed centering point, centering points -Manufacturer: WMW ABW, fixed center point -Adjustment: Morse taper MK5 -Number: 9x center points available -Price per piece -Dimensions: Ø 46/200 mm Csb Eohfxl Hsmy I Tegt -Weight: 1.9 kg / pc.